SPL REPAIR TO CERTAIN SANCTIONED WORKS UNDER AGE BR II AT NAMS

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) complete all as specified and directed.

Taking down unserviceable chowkhats or frame with shutters(without taking off shuters from the frames) of any description n. exc 1.50Sqm and removing from site and making good disturbed surfaces of wall in CM 1:3 complete all as specified & directed.

Material and labour for 35mm thick factory made solid PVC (Wood plastic composite ) moulded gauged door shutter with wire mesh 0.18mm nominal dia of wire and average width of aperture 1.40mm in any number of division with brown wood grain texture , including S.S wire mesh shall be fixed with 15x15 square tubes in is rails with screwing 8x28mm heat metal Zink coated screws can be remove or fix again after changing of wire mesh when needed . The density shall be as per manufactures instructions complete all as specified and complete all as specified and directed.

Material and labour for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant including making good after complete all as speicifed and directed of Make Rajshree or Ecocell equivelent

Ditto but of frame size 65x125 including all fitting making good after complete all as speicifed and directed of Make Rajshree or Ecocell equivelent

Material & labour for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf (g) 12 mm square guard bar, 10 cm centre to centre. (h) 25x4 mm flat iron all around for joint of both frame. (j) One shop coat of red oxide primer and two coats of Synthetic enamel paint to MS window and guard bar

Item No 7 contd Note: (i) Including taking down old steel window/ ventilator and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge. (ii) sheet glass and wire mesh shall be measured and paid separately)

Supply and fixing Sheet glass, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including wooden beading fixed nails or fix with oil putty complete all as specified and directed. (Note upto four storey height including all scaffolding work )

Supply and fixing GI wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples complete, all as specified and directed.

Supply and fixing Stainless steel but hinges 100mm long medium weight fixed complete all as specified and directed

Supply and fixing aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.

Supply and fixing aluminium handle fabricated type, anodised 150mm size conforming to IS complete all as specified and directed.

Supply and fixing Aluminium door stopper double support with rubber complete all as specified and directed.

Supply and fixing aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed.

Supply and fixing in repairs 3mm thick figured/ plain glass etc and glazing with oil putty in Sqm n.exc 0.50 each plan complete all as specified and directed.

Supply and fixing in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed tinned or stainless steel wire staple complete all as specified and directed.

Taking down cement plaster on Brick/concrete surface etc including racking out of joints hacking for keys scrubbing down with water complete all as specified and directed.

Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair all as specified and directed.

Material and labour for 15 mm thick rendering in cement mortar (1:4) on fair face of brick or concrete surface finished even and fair all as specified and directed. Note :(WPC shall be measured separately as per manufacturer's instructions).

Material and labour for, rendering 10mm thick in CM 1:3 over concrete surface as on ceiling finish even and smooth w/o using extra cement , complete all as specified and directed.

Material and labour for preparation of new plastered surface applying 1mm thickness putty and two coat of oil bound distemper complete all as specified and directed

Material and labour for preparation of new plastered surface applying one coat of primer and two coat of Acrylic emulsion paint complete all as specified and directed.

Material and labour for Prepration of new plastered surface and applying 3 coat of white wash on ceiling complete all as specified and directed

Material and labour for preparation of old decorated plaster or un- plastered surfaces and providing two coat of white wash on ceiling etc, complete all as specified and directed.

Material and labour for complete removal of existing treatment of old plastered surface of wall and applying two coat of oil bound distemper over a coat of 1mm thick wall care putty, complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint of approved quality, tint to achieve glossy finish, complete all as specified and directed.

Supply only liquid WPC complete all as specified.

Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed.

Supply and fixing Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:4 complete all as specified and directed

Supply and fixing Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:4 complete all as specified and directed

Material and labour for glazed ceramic coloured/printed / dark tiles size s of size 450x300x7mm thick on vertical surface in skirting /dado etc. ,set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles, 10 mm thick rendering on fair faces of concrete surface of verticle in CM (1:3) finished even and smooth without using extra cement complete, shade & design as approved by EIC complete all as specified and directed

Dismantling and taking down water storage tanks of 500 Ltr capaciaty and Supply and fixing 500 ltrs capacity rotatonal moulded polyethylene water storage tanks Triple layer in white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Supply and fixing of ball brass valve high pressure of 20mm dia complete all as specified and directed

Supply and fixing in repair Bib tap CP fancy type/long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed.

Supply and fixing in repair Stop cock concealed long shank chromium plated fancy type 15 mm bore screwed down high pressure with crutch or butter fly handle complete all as specified and directed.

Supply and fixing in repair Angle cock CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed.

Supply and fixing in repair brass chromium plated shower rose with Arm length not less than 150mm swivel joints size 125mm with arm fixing to steel pipe or union complete all as specified & directed

Supply and fixing in repair tubular towel rail 600mm long, 20mm dia 'D' type CP rail with fixed in wall complete all as directed

Supply and fixing in repair Pillar tap CP fancy type/long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed.

Supply and fixing in repair 10 ltr capacity low levels flushing cistern with PVC bend and PVC flush down pipe etc complete all as specified and directed.

Supply and fixing in repair vitreous china squatting pan "Orissa' pattern size 580x440 mm white with integrat foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed

Supply and fixing in repair vitreous China wash basin white,flat back size550x400mm including CP waste coupling 32mm bore, bracket for fixing etc complete all as specified.

Supply and fixing PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixing in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fixing stainless steel plate rack overall size 90 x 75 X 25 cm made out of 0.63mm thick steel sheet as per standard pattern fixing to walls with screwed complete all as specified and directed

Supply and fixing PVC waste pipe 32mm bore including socket complete all as specified and directed.

Supply and fixing in repair CP grating 125mm dia circular of approved make and fixing with cement mortar 1:3 complete all as specified and directed.

Supply and fixing in repair 18/19 mm prelaminated particle board, prelaminated both side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber/steel frame work (incl 2 Nos 100mm aluiminium handles, 1 Nos 100mm hasp & staples for each shutter) complete all as specified and directed.

Supply and fixing Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

Material and labour for 18 -20mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.

Supply and fixing in repairs mild steel powder coated curtain rods 20mm dia of approved quality incl bracket, knobs etc complete all as specified as directed.

Supply and fixing in repairs stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe of following sizes complete all as specified and directed

(a) 15mm bore

(b) 20mm bore

Taking down old PPR pipe connections including cleaning or removal from site of following size complete all as specified and directed :-

(a) 15 mm bore pipe

(b) 20mm bore pipe

Supply and fixing GI tubing medium grade including all fittings fixed to walls and ceilings or laid in floors at as specified and directed of following sizes complete all as specified and directed :-

(a) 15 mm bore pipe

(b) 20mm bore pipe

Demolition of brick work built in cement mortar complete all as specified and directed.

Material and labour for brick work using sub class ‘B’ bricks, straight or corved on plan exc. 6 mean radius in CM 1:6, complete all as specified and directed.

Material and labour for brick work using sub class ‘B’ bricks, straight or corved on plan exc. 6 mean radius in CM 1:6 but except bricks complete all as specified and directed.

Material and labour for brick work using sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Dismantling brick tiles or terraling single layer as in roofing complete all as specified and directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and dispose from site exc 500 mtr complete all as specified and directed.

Material and labour for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate as roof padding ,haunching, sub base floor incl water proof compound complete all as specified and directed.

Material and labour for company approved applicator for preparation of roof surface & applying evenly a tack coat of industrial bitumen primer 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150mm complete all as specified and directed.

Material and labour for 40 mm thick brick tiles laid over and including 25 mm screed bead in CM 1:4 and joints grouted flush in CM 1:3 mixed with 5% of crued oil by weight of cement, complete all as specified and directed.

Material and labour for 40 mm thick brick tiles laid over and including 25 mm screed bed in CM 1:4 but exept brick tiles and joints grouted flush in CM 1:3 mixed with 5% of crude oil by weight of cement, complete all as specified and directed.

Supply and fixing PVC (SWR) bend 110 mm with access door complete all as specified and directed.

Supply and fixing stack clamp out of 50mmx5mm flat iron and 16mm dia round iron stay including bolts and nuts and securing end of stay to wall or roof 100mm all as spicefied and directed.

Supply and fixing in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors and wall complete all as specified and directed.

Material and labour for 110mm bore of pipe PCC 1:4:8 type D-2 concrete bed to drain pipes including packing under and hauching against the sides of pipes after they are laid complete all as specified and as directed.

Supply and fixing 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed.

Material and labour for PVC(SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75/100mm complete all as specified and directed.

Material and labour for 110mm bore PVC Gully Trap setting / jointed with solvent cement complete all as specified and directed. .

Supply and fixing PVC(SWR) vent cowl 110mm dia complete all as specified and directed.

Supply and fixing 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed

Supply and fixing in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply and fixing 75mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed.

M & L for rolled mild steel work angle iron as in door frame/ cooler stand and other similar work confirming to Fe-290 or Fe-330 including complete all as specified and directed.

Material and labour for 1.25 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, complete all as specified and directed

Repair to steel window / gate including necessary welding, reivting, easing drilling and replacement of unserviceable hanging device, and makiing them in serviceable condition complete all as specified and directed.

Demolition of cement concrete (unreinforeced) in ground floors and pavings n. exc 15cm thickness (below or above ground level).

Material and labour for PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75 mm thick as in plinth protection finished fair & even in alternative bays n. exc 2M in length and joints filled with butmen mastic 1:3 (1 Bitumen : 3 Sand) complete all as specified and directed.

Material and labour for 100mm thick cement concrete Type D-2 1:4:8 using 40mm graded stone aggregate as in sub base complete all as specified as directed.

Material and labour for glazed and coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantiling of stone slab and tiles of any discription or thickness in floors / aprons etc complete all as specified and directed.

Material and labour for repair to RCC Chajjas, roof projection edges ,hanging part of chajjas, edges of chajjas, RCC parapets, under the roof / floor slabs with PCC 1:2:4 (using 12.5mm crushed graded agg) incl necessary renforcement 8mm to 12mm TMT bars , form work , MS wire mesh for bounding the concrete on ground required and plaster work in CM 1:3 & periodical services to match with the existing surfaces finishing at any height of buildings etc completed all as specified and directed by Engr-in-Charge.

Material and labour for demolition of cement concrete as in sunken floor of bath,wc and kitchen of any description and any position not otherwise specifically provided complete

Material and labour for 15mm thick cement screed in CM 1:3 admixed with liquid water proofing compound @ 200ml per bag of cement complete all as specified and directed.

Material and labour for cement concrete in foundation above filling and mass concrete type F2 1:7:12 (40mm graded agg) as in sunken floor complete all as specified and directed.

Excavation in trenches in soft/loose soil not exc 1.5 m wide and not exceeding 1.5 mtr in depth for foundation etc shaft, cesspits, manholes etc not exc. 10 sqm on plan and getting out complete all as specified & directed.

Excavating over areas in soft/loose soil, n exc 1.5 m deep and getting out complete all as specified & directed.

Excavating over areas in soft/loose soil, depth exc 1.5 m but not exc 3 m and getting out complete all as specified & directed.

Excavating over areas in soft/loose soil, depth exc 3 m but not exc 4.5m and getting out complete all as specified & directed.

Excavating over areas in soft/loose soil, depth exc 4.5 m but not exc 6m and getting out complete all as specified & directed.

Excavating over areas in soft/loose soil, depth exc 6 m but not exc 7.5 m and getting out complete all as specified & directed.

Excavating over areas in soft/loose soil, depth exc 7.5 m but not exc 9 m and getting out complete all as specified & directed.

Excavating over areas in soft/loose soil, depth exc 9 m but not exc 10.5 m and getting out complete all as specified & directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete. complete all as specified and directed

Material and labour for broken brick bats for filling as absorption etc complete all as specified and directed

Material and labour for RCC (1:2:4) nominal Mix using 20mm graded stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

Material and labour for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs , landings, balconies, canopies, deck slab and in shelves and the like complete all as specified and directed.

Material and labour for MS TMT bars 10mm dia and over, cut to lenth, bent to shape required incl cranking bending spirally for hooping for columns hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Material and labour for MS TMT bars 6 to 8 mm and over dia and cut to lenth, bent to shape required incl cranking bending spirally for hooping for columns hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Mild steel TMT bars 5 mm and over upto and including 10 mm dia in stirrups,spaces and binders cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9 mm dia complete all as specified and directed.

Use & waste for form work to soffits of suspended slab such as roof slab, floor slab , landing and similar work; not exc 200 mm thick horizontal or sloping, finished fair and even complete all as specified and directed.

Material and labour for Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontalor sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 150 mm dia of pipe.complete all as specified and as directed

Material and labour for Precast cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs of manholes, gully traps etc set in cement mortar (1:4) complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed

Material and labour for PCC 1:2:4 Type B1 using 20 mm graded aggregate as in surface channels and drains & coping, edging rounded or chamfered type etc complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate ) bed to pipes including packing under and hauching against the sides of pipes and tested for bore 150 mm pipes complete all as specified and directed.

Material and labour for PCC 1:2:4 Type B-0 (using 12.5 mm stone crushed agg.) as in coping etc in any description complete all as specified and directed.

Supply and fixing 150mm dia salt glazed stone ware drain pipe laid in trenches and jointed in cement mortar complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers n exc 25 cm thick complete all as specified and directed

Removing Excavated soils to distance exceeding 250 M but not exceeding 500M and depositing where directed complete all as specified and directed.

Material and labour for Vitrified tiles,dark shade 9-10mm thick (Square) polished, area of each tiles n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured pigment to match the shade of tile over and incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Material and labour for Vitrified tiles,dark shade 9-10mm thick (Square) for skirting,vertical surface polished, size of each tiles of size 600x600mm sqm in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured pigment to match the shade of tile over and incl 10mm thick rendering in CM 1:3 complete all as specified and directed.

Supply and fixing PVC wall panelling hollow multichambered section average thickness 7-8mm fixed inclusive of moulding and end caps fixed with PVC sleeves and screws as required at site complete including dismatling of old/decayed/broken panelling complete all as specified and directed.Note:- Colour/Shade will be decided by GE

Material and labour for wall care putty of 1mm thickness over plastered/Unplastered surface to prepare the surface even and smooth complete all as specified and directed. Note-Entire splashes in floor shall be cleaned immediately after completion of periodical services.

Material and labour for applying one coats of oil bound distemper by spray machine incl preparation of old surface by washing, rubbing down and stopping of distempered and painted surfaces on walls through electrical operated grinder etc, incl necessary minor repair of wall by putty complete all as specified and directed.

Supply and fixing powder coated aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed.( Min. thickness of powder coating 50 micron)

Supply and fixing aluminium powder coated shutter(for doors) wighing 0.55 kg/m including necessary jointing cleats,glazing clips, rubber beading with neoprene packing anodized handle 2 no in each, locking arrangement(mortised) and aluminuium anodised tower bolt 200 mm long aluminium snap beading screws complete all as specified.

Supply and fixing aluminium powder coated shutter(for window and ventilator) side hung type without sash, aluminium section wighing 0.55 kg/m including necessary jointing cleats,glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long (1 no.) hinges type B-21 100mm long( 2 no) suitable handle (1 no) complete all as specified and directed.

Supply and fixing aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples complete all as specified and directed

Supply and fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer scomplete all as specified and directed

Supply and fixing GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed Note uptoheight 5.50 m including all scaffolding work.

Supply and fixing in repair door closer hydraulically regulated, (Alminiumextruded section body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed

Supply and fixing Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and directed

Supply and fixing curtain rod 25mm bore of 1mm wall thickness made off stainless steel fancy type decorativewith decorative ball type side brackets and knobs including taking down old any type curtain rod complete all as specified and directed.

Material and labour for Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil all as specified and directed.

Material and labour for hard core of broken STONE BOULDERS of guage n.exc 63mm deposited spread and levelled in layer n.exc 15cm thick watered and well rammed to true surfaces complete all as specified and directed.

Material and labour for providing 100 mm thick Plain Cement Concrete Type B2 1:2:4 (using 20 mm graded stone aggregate) in as in floor, finished even and fair without using extra cement complete all as specified and directed

Material and labour for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade' A' all as specified and directed.

Material and labour for applying two coats of cement base paints over one coat of primer on walls etc, incl preparing new surfaces of walls by brooming down or by steel wire brushing complete all as specified and directed.

Material and labour for Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:3 complete all as specified and directed.

Material and labour for Brick work with sub class 'B' bricks in one brick thick honey comb walling ,built in cement mortar 1:3 complete all as specified and directed.

Taking down aluminium/copper point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed

Material and labour for Point wiring in replacement with 1.5 Sqmm (Nominal Area) 1100 Volt Insulated, FRLS unsheathed multi stranded flexible copper conductor cable in old PVC concealed conduit not less than 20 mm dia 1.5 mm thick for one light / fan point controlled by one switch (including cutting chases and making good the distributed surface ) and fixing new 3 mm thick hylem sheet top cover, sheet screws and 1.6 mm thick GI sunken boxes included 1.5 sqmm stranded copper conductor with green PVC insulation earth contunity conductor connected to comman earth dolly etc. complete all as specified and directed for the following:- NOTE : The cost of sunken boxes and bakelite sheet is included in the quoted rate)

One light / bell piont/ Fan point/ Exhaust fan point controlled by one 5 Amp switch one way.

One light point controlled by two Nos of two way switch

All as per Srl item No 135 above but with 2.5 Sq mm size cable for One 3 Pin Socket Outlet 5A on the Indepedant board complete all as specified

All as per Srl item No 135 above but with 2.5 Sq mm size cable for One 3 Pin Socket Outlet 5A on the same board with other switches complete all as specified

All a per item No 135 above but with 4.0 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 4.0 Sq mm copper solid conductor connecting to common earth dolly complete.

Supply and fixing in replacement switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed.

Supply and Fixing in replacement socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed

Supply and Fixing of switch piano flush button single pole two way 6 ampere complete all as specified and as directed

Supply and Fixing in replacement switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed.

Supply and Fixing in replacement switch type regulator 5 step 230 volts AC complete all as specified and as directed.

Supply and fixing in replacement ceiling rose 65/50 mm two to three terminals complete all as specified.

Supply and fix in replacement MCB 40 Amps single pole with neutral, AC 230 Volts complete all As specified and directed.

Supply and fix in replacement MCBs single pole (SP) 5 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

Supply and fixing in replacement Sheet metal enclosure for DB's when MCB's to be used single door factory made flush fixed complete with 200 Amps rated busbar 240 Volts single phase 8 ways complete all as specified and directed

Supply and fix in replacement for sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit medium grade of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) and including non metallic medium grade rigid PVC conduit, including cutting chases in brick wall, and making good to match the existing specifications complete all as specified and directed. Note :- (i) Rates are deemed to be included cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core (FRLS) PVC insulated copper conductor cable, one run of 6.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Supply and fix in replacement for sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.0 Sqmm drawing into and including PVC non metallic rigid conduit medium grade of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) and including non metallic medium grade rigid PVC conduit, including cutting chases in brick wall, and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper conductor cable, one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Material and labour for replacement of lamp holder insulated body with 9 Watt LED Bulb, back plate batten/angle type for batten fitting fixed on bakelite sheet 100mmx100mm 230V AC cool day light 6500K having maximum height 1020mm heavy duty complete all as specified.

Supply and fix exhaust fan, steel body single phase 230V of size 300 mm sweep with blades, frame and louvers all as specified and directed.

Supply and fix exhaust fan, PVC body single phase 230V of size 220 mm sweep with blades, frame and louvers all as specified and directed.

Supply and fixing in replacement of LED T-8 tube light fitting with sinle side connection LED tube rod 18/20 W, 4 Feet made of CRCA sheet steel box type including bipin holder and connection with PVC insulated twin core 23/0.0076 ywisted copper cable from ceiling rode to light fitting complete all as specified and directed.

Supply & fix LED Street Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens.

Supply and fixing of security light mounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat of size 40 x 6 mm and nuts and bolts and painting with aluminium paint,all as direced by Engr in Charge

Supply and fixing in replacement of single pole and neutral sheet metal enclosures with two pin & earth plug and socket complete with one singlr pole MCB of 20 amps complete all as specified and as directed.

Supply and fixing geyser 25 ltrs capacity after connecting electric and water connection and screwig nut and bolts to fixed on wall and make surface good complete all as specified and as directed

Supply, laying in trenches or wall including GI protection pipe and testing in replacement of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and as directed.

Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PART 1 , with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switche, DBs) including testing on completion complete all as specified and directed.

Removal of surplus excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified.

Supply,laying & fixing in replacement double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. all as specified and directed by Engr in Charge of size 63mm outer dia and 50 mm inner dia.

Supply and lay on wall/ floor etc GI pipe medium grade of dia 32 mm for protection of cable all as specified and directed.

Taking down ceiling fan/geyser/exhaust fan in situ and refixing after servicing, repairing and painting to ceiling fan scrating old paint and preparation of surface for painting with one coat of white / grey enmeled paint and including cable from ceiling rose to fan complete all as specified and as directed.

Taking down old meter and refixing them in new meter panel and make necessary connection to bus bar and MCB DPs in meter panel, complete, all as specified and as directed.

Supply and fixing in replacement of bell push 6 amps one way 230 volts AC complete, all as specified and as directed.

Supply and fixing in replacement of bell ding dong AC 230 volts complete all as specified and as directed.

Supply and fixing in replacement PVC connection of size 600 mm length 50 mm dia all as specified and as directed.

S & F in repairs, installation, commissioning and testing Polycarbonate CPRI approved Meter Panel. The Panel shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES which should be UV resistance in accordance with IEC 61439-1, clause 10.2.4:Meter Panel type Wall Mounted type on Mounting Structure RAL 7016 Mini. Size 900 x 750 x 170mm . The Meter Panel should be anti-acid, anti corrosive & Fully Transparent Door for meter Vision. Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262. The manufacturer of panel shall submit a copy of his CPRI TEST REPORT IN POLYCARBONATE only also share panel assemble by OEM, channel partner or sister concerned assembly will not accepted. DEGREE OF INGRESS PROTECTION IP 65 IN ACCORDANCE WITH IEC 60529. The gasket should be internally embedded made of polyurethane and Enclousure make approved in MES. The manufacturer of panel SHALL submit a copy of TYPE TEST REPORT of a board made out of Polycarbonate thermoplastic panel in accordance with IEC 60439-1. The CPRI report shall have mention of following tests performed and passed out satisfactorily Temperature Rise, Dielectric Properties, Short circuit withstand current – Rated peak, short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits and submit the copy of type test reports for Polycarbonate Thermoplastic Board only. Test Reports submitted of other material of construction like MS, SS will not be applicable. Each Board shall have individual routine test report of the manufacturer.

Item no 169 contd.. The panel should pass glow wire test 960°C in accordance with 60695-2-11 flame retardant and self-extinguishing. One Main Incomer MCCB 100A FP 16KA Thermal /Magnetic Release with spreader link. MCCB/MCB Nob Operated by Flip Cover. Indicator Provided on each phase. Provision Six Nos Single Phase Sub-Meters. TPN Copper Bus Bar Provided 100Amp with color coding. Output supply by MCB DP 32Amp 6 Nos. Meter Enclosures & Enclosures Accessories as per RAL 7035. Ten Nos Terminal Blocks Provided for output Supply.

Supply & fixing in replacement of Square/Round recess mounted down light, 15 watt (min) 4000K including separate replaceable electronic driver ceiling cut out dia as per existing shape/size round shaped polycarbonate fixture complete all as specified and directed.

Santokh Singh and Associates (BID ID -3292527)

Chander Mohan Arora Contractor (BID ID -3292599)

M/s Vijay Construction Co. (BID ID -3292513)