SPECIAL REPAIR TO CERTAIN BUILDINGS (OR MD ACCN) AT ITARANA ALWAR

Amount

B/R ITEMS Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars & precast concrete mosonry etc. and removal all rubbish material complete all as specified directed.

Demolition of existing roof treatment/lime concrete/ PCC padding/Screed bed over treatment of nay thickness laid over RCC roof/chhaja etc, removing complete layers of bitumen under concrete/PCC padding, sweeping the surface with wire brushes and cleaning with water to remove all loose dirt etc as preparation to receive treatment complete all as directed.

Taking down cement or cement lime plaster any description, on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish off the premises, complete all as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level and removal all rubbish material complete all as directed..

Racking out joints/pointing to random rubble or polygonal rubble masonry walls uncoursed or brought upto courses built in cement mortar complete all as specified and directed

Taking up or down steel tubing and connections including cleaning for refixing or removal complete all as specified and directed :-

15mm bore.

20mm bore.

25mm bore.

Taking down chowkhats or frames with shutters (without taking off shutters from frame)n exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as directed.

Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each complete all as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

Distmanting of wall and any type of ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

Dismantling AC sheet (corrugated, semi corrugated etc.) as in roof etc. including ridges, complete all as specified and directed.

Demolition and breaking up drain pipe of 150mm dia (salt glazed stone ware, AC or reinforced concrete) set in cement mortar including PCC bedding and haunching etc complete all as specified and directed.

Dismantling water tank of capacity exceeding 250 Ltrs but not exceeding 500 Ltrs and removal from site complete all as specified and directed .

M & L for cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection 50 mm thick laid in bays and surfaces finished even and fair, including filling the joints with bitumen mastic complete all as specified and directed

M&L providing precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chajjas, water troughs, mangers, shelves and similar articles with plain faces joint as directed and setting in CM 1:4 complete all as specified and directed.

M & L 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in levelling course of floors & roof, finished fair and even complete all as specified and directed.

M & L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as directed.

M & L for PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in kerb blocks with plain fair faces including chamferes, weathering, throating etc and setting in cement mortar 1:4 complete with joints to match all as specified and directed.

M & L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as directed.

M&L for rendering 5 mm thick in cement mortar 1:3 as in ceiling and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on other than fair face of brick masonry surface or on stone masonry surfaces finished even and smooth without using extra cement complete all as specified and directed.Using water proofing compound @ 3%by weight of cement (WPC shall be measured and paid separately).

Supply only water proofing compound complete all as specified and directed.

Supply only integral water proofing liquid, complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on fair face of brickwork masonry wall surfaces or on stone masonry surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparing newly plastered walls surfaces and applying two coats of cement base paint complete all as specified and directed.

M & L for preparing old plastered or unplastered walls surfaces and applying two coats of white wash complete all as specified and directed.

M & L for preparing old plastered or unplastered ceiling surfaces and applying two coats of white wash complete all as specified and directed.

M & L for preparing old plastered or unplastered walls surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L for complete removal of washing rubbing down and stopping of distempered and painted surfaces of old plastered surfaces of wall and applying two coats of distemper oil emulsion white or tinted over and including one coat of 2mm thick wall care putty complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion white or tinted over and including one coat of 2mm thick wall care putty complete all as specified and directed.

M & L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes complete all as specified and directed.

M & L for screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes complete all as specified and directed.

Rendering 10 mm thick plaster in cement mortar 1:4 on other than fair faces of brick work or stone surfaces of walls to receive tiles, complete all as specified and directed

Rendering 15mm thick in CM 1:4 on top of Chajjas and fair faces of roof or concrete surfaces finished even and smooth without using extra cement

M&L 350x250x7 mm/450x350x7mm thick glazed ceramic coloured tiles as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.

M & L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.

S &F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with mild steel square tube fixing in opening complete all as per specifications and drawings as applicable to item 08095 given in SSR Part – II (2010).

M & L for brick work with FLY ASH BRICKS straight or curved on plan exc 6 mean radius , built in CM 1:6 complete, all as specified & directed.

M & L for brick work with FLY ASH BRICKS straight or curved on plan to any radius , built in CM 1:4 as in half brick wall complete, all as specified & directed.

M&L 20-25mm thick machine cut Kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L 25-30mm thick machine cut Kota stone slab in single piece as in shelves and counter laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing including ball nosing of exposed edges and including dismantling old stone slabs complete all as specified and directed.

S&F steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed for following sizes:-

15mm bore.

20mm bore.

25mm bore.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floor etc ) complete all as specified and directed for following bore:- Note : Old serviceable water tubing retrieved from taking down here-in-before shall be used. The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.

15mm bore.

20mm bore.

S&F in repair 15mm bore dia bib tap cast copper alloy fancy chromium plated crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair 15 mm bore angle stop valve of copper alloy, fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair 20 mm bore dia angle stop valve of copper alloy, fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair 15 mm bore dia stop valve of copper alloy, chromium plated fancy type with long shank and cup (Concealed type), screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S & F swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms), Complete all as specified and directed.

S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S & F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors pipe including taking out old unserviceable PVC/CI Pipe, complete all as specified and directed for the following sizes:-

75mm bore.

110mm bore.

S & F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall pipe including taking out old unserviceable PVC/CI Pipe, complete all as specified and directed for the following sizes:-

75mm bore.

110mm bore.

S&F PVC (SWR) bends any radius complete all as directed for the following sizes:-

75mm bore.

110mm bore.

S&F PVC (SWR) 75mm bore bends any radius with access door complete all as directed.

S&F PVC (SWR) 110 mm bore junction single (Single T) equal or unequal with access door complete all as directed.

S & F PVC (SWR) branch piece, single (single Y) equal or unequal for 75 mm bore of pipe complete all as specified and directed.

S & F PVC (SWR) vent cowl for 110 mm bore of pipe complete all as specified and directed.

S & F PVC (SWR) floor trap, plain with grating including jointing with solvent cement dia of outlet 75 mm bore complete all as directed.

S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in repairs vitreous China squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe etc) including provision of lime concrete bedding fied in repair, making good to floor complete all as specified and directed .

S&F PVC low level flushing cistern10 litre capacity with intel ball valve float & handle, syphonic action type including brackets & flush pipe of polythylene of low or high density or PVC 32mm dia for LLFC fixed in repairs all as specified and directed .

S & F in repairs kitchen sink without drainage board made of satinless steel 1 mm thick with plug washer and waste coupling including bedding in cement mortar to dwarf wall or including and fixing cantilever brackets and connecting union pipe over all bowl size 495mm x 420mm x 160 mm / 410mm x 310 mmx 160mm including flush pipe of polyethylene of low or high density or PVC 32mm bore with long screwed shanks and fly nuts complete all as directed.

M & L for steel windows conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Wire cloth shall be measured and paid for separately).

M & L for factory made steel windows conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete without glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as directed. Note :- Wire cloth shall be measured and paid for separately.

S&F steel ventilator with top hung shutter including hinges, steel peg stay etc. and including taking down of old unserviceable ventilator complete all as specified and directed.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks galvanised stainless steel wire staples complete all as directed.

S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks galvanised stainless steel wire staples complete all as directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all specified and as directed.

S & F 3mm thick sheet glass frosted and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

S & F for frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors ladder, frame balusters, walk ways, railing frame work or water tank and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for framed work as in doors or gates angle or others covering door etc to be prepared for handing or sliding with including either hooks and hinges or steel hanging door fittings(exclusive of steel or other covering running rails and guides) and hanging also fastening and fixing complete conforming to FE-290 Gde E-195 all as specified and directed.

M&L 35mm thick factory made 2nd class glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. The shutter shall be fitted to the chowkhats as directed

S&F 35mm thick factory made IInd Class Hard wood plain framed, panelled shutter(two panel) with lock rail and panel of 9mm B.W.P. commercial ply seasoned & chemically pressure treated /12mm thick particle board veneered with commercial veneering on both faces. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.

S&F for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and directed.

M&L preparation old steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint of 1st grade quality complete all as specified and directed.

M & L for preparation of newly wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over one coat of pink primer complete all as specified and directed.

M & L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade complete all as specified and directed.

S & F 100 mm size butt hinges, extruded aluminium alloy with galavanised mild steel hinge pin, ISI marked complete all as specified and directed.

S & F mild steel butt hinges medium weight cold rolled ISI marked of size 100 mm complete all as specified and directed.

S & F mild steel barrel tower bolt, 200 mm long stove enamelled black with bright bolt & fixed complete all as specified and directed.

S & F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S&F 150mm size aluminium handle, cast type anodised complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts with hasp & staples type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, 04 on bolt plate and 02 on staple plate and fix complete all as specified and directed.

S&F 140mm long floor door stopper of aluminium alloy body and tongue, annodised, with hard drawn steel spring fixed in floor complete all as directed.

S&F 150mm size mild steel pressed , oval type, bow handles, stove enamelled black anodised complete all as specified and directed .

M & L for cutting holes into stone masonry walls n exc half brick built in cement mortar or in cement lime mortar for inserting holdfasts and making good disturbed surface portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 exc. half brick but not exc one brick as required complete all as directed.

M&L screed bed or bedding layer of mortar over PCC padding , 15 mm thick, in cement mortar 1:4, mixed with water proofing compound 2% by wt of cement on top of chajjas, parapet and over roof slabs finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

M & L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M & L for TMT bars 6mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

S & F for mild steel cupboard shutter with frame, Godrej Pattern, made out of 22 guage mild steel sheet including chromium plated MS handle with proper locking arrangment (brass mortice lock, vertical type, size 65mm, 4 Lever with escutcheon plates & two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 06 Nos 12mm dia bolt 150mm long grouted in brick wall/concrete including making good the distrubed sufaces as original complete all as directed. Note : The measurment shall be taken of from elevation and not girthwise.

M & L for MS flat iron 25x3mm for hold fast bands, including welding to angle iron/door/ window frames etc., complete all as specified and directed.

S & F in repair for powder coated mild steel drapery rod of 20 mm inner dia (in lengths as directed) of approved colour with and including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug and steel screws on walls/beam, including PVC curtain rings of matching colour @ 10 cm C/C complete all as specified and directed.

S&F rotational moulded polythylene water tanks triple layers (Cylindrical vertical with closed top) of any capacity and fixed in same position capacity of tank in 500 Ltrs and including all necessary fittings complete all as specified and directed.

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

M&L for laying 60mm thickness machine pressed precast concrete glazed coloured interlocking paver block with any shape and size confirming to IS 15658-2006 M-35 grade grey cement and pigment over and including 25mm thick sand cushioning complete all as specified & directed.

M&L for preparation of new plastered surfaces and applying two coats of water based anti fungal exterior emulsion paint over a coat of 2 mm thick white wall care putty complete all as specified and directed.

M & L for 6mm thick non asbestos cement plain building board, fixed to steel frame work in ceiling including two coats of white wash, complete all as specified and directed. Note :- Steel frame work shall e measured & paid separately.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with 'L' or 'J ' type or cranked hook bolts, complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in padding and levelling course on roof laid to average thickness 50mm thick and finished even and smooth without using extra cement complete all as specified & directed.

Supply and fix APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.5 Kg/Sqm of make super thermolay manufactured by STP Ltd or ‘Hyper Plas’ (Polyster) manufactured by M/S IWL Ltd or ‘Shaliplas’ (polyester) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt (weighing not less than 150 gm/Sqm), with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd} at the rate of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions, complete all as specified and as directed. Note :- (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 30/40 confirming to IS-73, [email protected] Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.40 Kg/Sqm. (ii) Polymeric membrane shall be taken to a height of 60cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimeny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen. (v) Exposed surfaces of APP membrane shall be applied with one coat of bituminous aluminium paint @ 150 ml/Sqm. (vi) Above aspects are deemed to be included in quoted rate.

S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as per specifications and drawings as applicable to item 08113 given in SSR Part – II (2010). Note :- PVC fillets & PVC strips shall be measured and paid for separately."

M & L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame all as per specifications and drawings as applicable to item 08117 given in SSR Part – II (2010).

S&F Rough cast wired glass 6.4 mm thick exc 0.5 sqm but n exc 0.75 Sqm and glazing with oil putty in square all as specified and directed

S & F 0.71mm thick plain, aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) completed all as specified and directed.

S&F brass chromium plated shower rose fancy type 150mm x 150mm size with or without swivel joint including fixing with 15mm GI steel pipe or union complete all as specified and directed.

S&F Vitreous china bowl/ half stall pattern urinal flat back, size of 465 X 355 X 265 mm white with grating and union for discharge pipe including, waste pipe and PVC connection, bedding urinal against wall in cement mortar 1:2 securing urinal to, plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S & F in repairs white Vitreous china wash down water closet pan (pedestal pattern) with superior quality water jet including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including flush pipe and fixing bolts (excluding flushing cistern) etc complete all as specified and directed.

S & F in repairs vitreous china wash basin, light colour, flat back, size 550 x 445 mm including one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed complete including cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. Make :-Cascade NXT Poupler, Cat Pat No C0431 of Parryware or equivalent of Hindware.

S & F in repair for 15 mm bore pillar cock with aerator, half turn, cast copper alloy chromium plated with capstan head screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed fly nuts, screwed for iron pipe and fixed complete all as specified and directed. Make :- Cat Part No G-3003A1 of Parryware or equivalent Make of Jaquar.

S&F in repair 15mm dia bib tap cast copper alloy fancy type half turn with wall flange chromium plated with capstan head screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make :- Cat Part No G-3004A1 of Parryware or equivalent to Jaquar.

S & F in repairs 15 mm dia bore fancy type basin mixer without popup waste system but including plain waste 32mm size with aerator complete, cast copper alloy with chromium plated screwed down high pressure with long screwed shanks & fly nuts, screwed for iron pipes complete all as directed. Make :- Cat Part No G-3414A1 of Parryware or equivalent to Jaquar.

S & F in repair 15 mm bore dia angle stop valve, fancy type, chromium plated with long shank and cup (concealed type) half turn, cast copper alloy screwed down high pressure with capstan head screwed both ends for iron pipe or for union complete all as specified and directed. Make :- Cat Part No G-3453A1 of Parryware or equivalent to Jaquar.

S & F in repair CP Towel rack 600mm fixed to walls with chromium plated, brass screws complete all as directed. Make :- Cat Part No CA-601 of CERA or equivalent to Jaquar.

S & F in repair CP Over head rain shower 230mm dia (9') complete all as directed. Make :- Cat part No CG 410 of Cera or equivalent to Jaquar.

S & F in repairs chromium plated toilet paper holder with cover fixed to walls with chromium plated CP brass screws complete all as specified and directed. Make :- Cat Part NoT6405 of Parryware or equivalent of Jaquar

M&L 15 to 20 mm thick granite slab (ant type) in one peice machine cut, bedded screed bed 15mm thick in CM 1:6 and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including citting and polishing including rounding/bull nozing the edges complete all as specified and directed. Note : Single piece of grantie will be laid at top of kitchen and wash hand basin plateform.

M & L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed.

M&L for reinforced concrete pipes 150 mm bore class NP2 laid and jointed with collars and rings of suitable dia conforming to IA of IS 5382 : 1967 and joint finally packed with cement sand mortar 1:1 complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, Manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in soft/ loose soil, complete, all as specified & directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick,complete, all as specified & directed.

Removal of excavated surplus spoil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point,complete, all as specified and directed .

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppy and fixing in the frame at site complete all as per specifications and drawings as applicable to item 08080 given in SSR Part – II.

E/M ITEMS Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including teak wood battens/PVC casing caping and making good disturbed surfaces of walls, floors & ceiling etc.including dismentling of fittings to match with existing surfaces, complete all as specified and directed.

M & L for point wiring complete with 1.5 Sqmm single core unsheathed stranded copper conductor cable of 1100 volts grade PVC insulated and unsheathed FRLS cable enclosed in and including PVC casing and capping not less than 20mm width with MS sheet metal sunken switch/terminal box 1.2mm thick and phenolic laminated sheet cover 3.0mm thick and brass screws with cup washers with all necessary wall cutting and making good distrubted surface as directed, including all necessay wall cutting and making good disturbed surface including 1.5 Sq.mm solid copper conductor with green PVC FRLS insulated unsheathed earth continuity conductor to common earth & connecting to earth dolly for the following :-

One light point controlled by one, one way switch

One fan point controlled by one switch and regulator.

One bell/buzzer point controlled by bell push.

One light point controlled by one, two way switch

One 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

One 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

M & L for point wiring complete for 15 Amps switch socket combination on independent board with with 2.50 Sqmm single core unsheathed stranded copper conductor cable of 1100 volts grade PVC insulated and unsheathed FRLS cable enclosed in and including PVC casing and capping not less than 20mm width with MS sheet metal sunken switch/terminal box 1.2mm thick and phenolic laminated sheet cover 3.0mm thick and brass screws with cup washers with all necessary wall cutting and making good distrubted surface as directed, including all necessay wall cutting and making good disturbed surface including 2.50 Sq.mm solid copper conductor with green PVC FRLS insulated unsheathed earth continuity conductor cable to common earth & connecting to earth dolly.

S & F switch piano flush type 5/6 Amps single pole one way 230 volts complete all as specified and directed.

S & F switch piano flush type 5 Amps single pole two way 230 volts complete all as specified and directed.

S & F switch piano flush type 15 Amps single pole one way 230 volts complete all as specified and directed.

S & F, socket outlet 3 pin(with 2 pin outlet also), 5/6 Amp flush type, 240 volts all as specified & directed.

S&F socket outlet two-in-one, 3 pin, 5 Amp and 15 Amp, flush type , 240 Volt complete all as specified & directed.

S&F Bell push flush type 5 Amps siingle pole one way 240 volts complete all as specified and directed by Engineer-in-Charge.

S & F for electric bell/buzzer, AC 230 volts, single pole, ISI marked, complete all as specified and directed.

S & F ceiling rose surface bakelite 65x50mm with two or three terminal complete all as specified and directed.

Taking down and refixing serviceable flood light and connecting up with necessary wiring of 3 core flexible copper wire, complete all as specified and directed.

S&F decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 16W to 20W with LED tube of model E-LITE LED pride and connecting up with the fitting from ceiling rose/connector using copper flexible cord of size 1.5sqmm, 3 core of suitable length complete all as specified and directed. Make :- Havelles Cat Part No LHEXBHP71N1W018 or equivalent of Philips/Cromption Greaves/Bajaj/Wipro/GE.

S&F LED 16 Watt ultra slim edge 2x2 feet lit panel in aluminium casing recess mounted square fixtures in white finish suitable for low ceiling height, 2 in 1 3K, 4K, 6K with and including LED prewired and connecting up dismantling of old unsv recessed mounted light, complete all as specified and directed. Make :- Havelles Cat Part No LHEBLPPNUZ1W018 or equivalent as specified in Appendix 'D'.

S & F for lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fixing Adore LED lamps of 9/10 Watt and including taking down old u/s CFL lamp complete all as specified and directed. Make - Cat Part No LHLDERHEML8X010 of make Havells or equivalent model of make Philips/Cromptom/ Greaves/Wipro/Bajaj

Supply & Fixing of stepped type electronic fan regulator flush type and connecting up , ISI marked , 240 Volts complete all as specified and directed.

S & F sheet metal enclosure double door DB SPN 8 way, 240 volts protection class IP-43 made out of CRCA mild steel sheet surface with epoxy powder coated surface confirming to IS-13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity all as specified and directed.

S & F sheet metal enclosure double door type suitable for fixing MCCB 125 Amps TPN with 200 amps rated bus bar vertical DB 4 ways TPN including incoming MCCB 125 Amps 415 Volts completed all as specified and directed.

S & F sheet metal enclosure single door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar, 2 way, 240 Volts complete all as specified and directed.

S & F MCB SPN 32 Amps, 240 volts, B-curve, rupturing capacity 10KA conforming to IEC-60898, Part-I, complete, all as specified & directed.

S & F MCB SP 6 to 32 Amps, 240 volts, B-curve, rupturing capacity 10KA conforming to IEC-60898, Part-I complete, all as specified & directed.

S&F MCB 63 Amps, 240 Volts, single pole & neutral complete all as specified and directed.

S & F for submain wiring with 2 single core PVC insulated & PVC unsheathed FRLS cable 1100 Volt grade with 06 Sqmm copper multistranded conductor drawn through and including PVC conduit/casing-caping fixed on surface to wall/ ceiling by means of MS screws and saddles including one run of 6 Sqmm single core multistranded copper conductor 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth and connecting to earth dolly and including taking down old u/s sub main wiring complete all as specified and directed. Note: - Two runs of main cable, one run of earth continuity conductor and one run of conduit/casing-caping will be measured and paid as one length only.

Supply/Laying / fixing, jointing, testing and commissioning in replacement of 3.5 core 50Sqmm LT under ground cable 1100 volts grade XLPE insulated & PVC sheathed cable heavy duty armoured, with multistranded aluminium conductor laid in trenches/ ducts/ pipes/fixed on walls/poles complete all as specified and directed. NOTE :- (a) Excavation & earth work, shall be measured and paid for seprately under respective items catered in B/R part of the BOQ (b) GI pipe for laying of cable, sand cushioning, cable protection cover shall be measured and paid for seprately under respective items of the BOQ (c) Road cutting involved during excavation for laying of cables etc shall be made good as per existing road. Nothing extra shall be admissible on this account. Quoted rates of the item shall be inclusive of the above provisions.

S & F second class hardwood rectangular block open recessed of size 30cm x 25cm x 5 cm depth with 3 mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug (4 Nos) complete all as directed.

Supply and fixing LED type street DRACO Series , light luminaire 20 Watt 230 V, 50 Hz and including all necessary fitting accessories and LED complete all as specified and directed. Make:- Cat Part No LTESS20WLED of make C & S or equivalent model of make Crompton/ Greaves/Wipro

Supply / Lying, jointing and testing XLPE insulated armoured heavy duty LT under ground cable with aluminium stranded conductor, 1100 volts grade cross sectional area 16 Sqmm 2 core laid in trenches/ ducts/ through pipes, under floors or roads/along poles etc complete all as specified and directed. Note :- Sand cushioning, Cable protection, GI protection pipe, Clamps, Jointing kits and Excavation & Earth work shall be measured & paid for separately.

M & L for brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) with width equal to the length of brick laid dry and flat abutting each other with gaps between adjacent bricks n exc 10mm over UG cable for protection complete all as directed.

M&L for dry sand and punning for cushioning to under ground cable complete all as specified and directed. Note : For the purpose of payment only punned thickness shall be measured.

Supply and fixing cubical metallic box of size 0.80 mtr x 0.60 mtr x 0.30 mtr depth and made out of 2 mm thick CRCA MS steel sheet, front openable double door type with locking arrangement with and including 3 mm thick plain sheet clear glass of suitable size fixed to facilite meter reading, all internal and external steel surfaces painted with two coats of synthetic enamel paint over a coat of red oxide primer, internal wiring with PVC insulated single core multistranded copper conductor FRLS cable IS - 694 marked of adequate size but not less than 6 Sqmm with proper ferrule and cable gland, box shall be fixed on wall with 'Anchor' type fastner type bolts and nuts (set of 6 bolts of 12 mm dia 200 mm long with nuts and washers ) grounted into the wall properly to hold the box, writing MES/Qtr No for each energy meter with thick white synthetic enamel paint, neoprene rubber gasket shall be provided for proper sealing, including box shall have arrangement for fixing electic energy meter - 04 Nos, MCB DB SPN 2 way - 4 Nos, MCB DB SPN 4 way - 01 No, complete all as directed. Note :- (i) Existing electric meters - 04 Nos will be taking down carefully and refixing the same inside the new meter box carefully including necessary electric connections and sealing the electric meter and MCB DB SPN 4 Way - 01 No and MCB DB SPN 2 Way - 4 Nos shall be measured and paid for separately under relevent items of this BOQ. (ii) Cubical box shall be fix inside (Concelled) the existing wall by necessary cutting/grouting the wall and make good the disturbed surfaces by applying the cement plaster and white wash to match with the adjacent surface of wall.

S&F wall mounted Fan 450mm sweep with high performance acrylic blades, 55W (1300RPM) 240VAC including fitting and necessary connections complete all as specified and directed.

S & F sheet metal enclosure single door type suitable for fixing MCB's SPN with 200 Amps rated bus bar 4 ways 240 Volts completed all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600x 600 x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M deep below normal ground level and connected to galvanised iron earth wire 4mm dia by means of bolts, nuts, checknuts and washers of GI or steel all as shown in electrical plate No 3 of SSR Part-I 2009 and connection to main switch board / Test point /panel /equipment all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, returning, filling in and removal of surplus soil to a distance n exc 50 M, Charcoal and Salt in alternate layer 15cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20mm dia for watering and 15 mm dia 3 M long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25mm x 3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1 40mm thick precast RCC pit cover1:2:4 type B1 shall be provided on CI frame etc complete, all as specified & directed.

M/S SHEODAYAL GUPTA

M/S JINDAL ENTERPRISES

SHIVA CONSTRUCTION COMPANY

S AND A ENGINEERS CONSTRUCTION CO