PROVIDING INSTALLING AND TESTING OF MHC PUMP SET AT ITI NIARI BLOCK DHAR DISTT PATHANKOT UNDER DEPOSIT WORK

Amount

ESTATE WATER SUPPLY MACHINERY

WATER WORK GALGHAT Providing & testing of Multistage Horizontal Centrifugal (MHC) Pump set make KSB/Mathur/ Plat/ Kirloskar/ Cromption/ or equivalent make with C.I Impeller capable of delivering 93000 LPH discharge 145 mtr head, slow speed (1440-1485 RPM) with suitable IE3 electric motor rating consisting of Cotrol Pannel (Volt meter, Ampere meter,ELCB, Single Phase Preventer) steel base plate for pump and motor, panel board and Electrical cable copper 19/16mm/35mm including labour work(odd job) and dismentling old pump set complete in all respect.

BOOSTING STATION BASSA Providing & testing of Multistage Horizontal Centrifugal (MHC) Pump set make KSB/Mathure/ Plat/ Kirloskar/ Cromption or equivalent make with C.I impeller capable of delivering 69000 LPH discharge 136 mtr head, slow speed (1480-1485 RPM) with suitable IE3 electric motor rating consisting of Control Pannel (Volt meter, Ampere meter, ELCB, Single Phase Preventer) steel base plate for pump and motor, panel board and Electrical cable copper 19/16mm/35mm including labour work (odd job) and dismentaling old pump set complete in all respect.

PUMPING MACHINERY (FOR GALGHAT) Providing & Installing testing & Commissioing of one no Electrically driven submersible pumping set of required make cable of delivering 150 LPM against head of 35 mtr along with electric panel board consisting of electric appliance gsp such as automatic starter, Main switch, volt meter, Ampere meter, ELCB, shunt capacitor, Single phase preventer indicating lamps, MVB/MCCB's etc including MS column pipe of suitable size 10m (3 3m length each with flanges screwed and welded on both sides rubber gasket nuts and bolts submersible cable (of reputed make) complete in all respect.

Rate of Motor with pump

Panel Board

Submersible Cable size 2.05 mm2

Column Pipe (G.I) 50mm i/d

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge).

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. (a) Size 0.6 m. x 0.6 m.