Construction of Four Lane From Morgaon Road to Nira Road to Phaltan Road on 24.00 m D P Road under Baramati Muncipal Carporation . Tal.Baramati Dist.Pune

Amount

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 milimetre, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 milimetre in thickness.

Excavation for roadway in earth soil of all sorts, sand, gravel or soft murum including dressing section to the required grade camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed.

Providing earth work in embankment with approved materials obtained from other sources upto lead of 50 metre including all lifts, laying in layers of 20 centimetre to 30 centimetre thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97% of standard proctor density etc. complete (Material obtained from Other sources).

Construction of granular sub-base by Plant Mix Method by providing close graded Material, mixing in a mechanical mix plant at Optimum Moisture Content, carriage of mixed Material to work site,spreading in uniform layers with Motor Grader/ Paver on prepared surface and compacting with vibratory power roller to achieve the desired density complete as per clause 401.For Grading I Material.

Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.Laying By Grader/Paver.

Providing and applying primer coat with bitumen emulsion on prepared surface of Granular Base including clearing of road surface and spraying primer at the rate of 0.60 kilogram/Square Metre using mechanical means.

Providing and applying tack coat on the prepared surface heating by flames in boiler and spraying bitumen with sprayer on dry/hungry Black Top surface at 3.00 kilogram per 10 Square Metre using VG-30 grade bulk bitumen.

Providing and laying Bituminious Macadam using crushed aggregate of Grading 1, premixed with bituminious binder, transported at site with Vehicle Tracking System, laid over a previously prepared surface, finished to the required grade, level, alignment and rolling to achieve the desired density for 80/100 milimetre compacted thickness with using Drum Mix type hot mix plant with Superwisery Control and Data Acquisition, having complying essential features of hot mix plant as per IRC-27:2009 specified conditions and attachments such as electronic load sensor based belt conveyers, automatic synchronization of bitumen and aggregate fedder, built in dust controller system and Programmable Logic Controller for Drum Mix plant, Sensor Paver and Vibratory Roller excluding prime/Tack coat complete with VG-30 grade Bitumen of dose 3.30 percent.

Providing and laying bituminous concrete using crushed aggregates of Grading-1, premixed with bituminous binder at 5.20 percent by weight of total mix and filler, transported to site with Vehicle Tracking System, laid over a previously prepared surface, finished to the required grade, level, alignment and rolling to achieve the desired compaction for 50 milimetre compacted thickness with VG-30 Bitumen, excluding prime/tack coat. Using Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory Roller with Stone Dust filler.

Supplying hard murum at the road site including conveying and stacking complete.

Spreading the hard murum for side width complete.

Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering complete.

Providing and laying of hot applied thermoplastic compound 2.50 milimetre thick including reflectorizing glass beads at 250 grams per square metre area, thickness of 2.50 milimetre is exclusive of surface applied glass beads as per Indian Road Congress:35. The finished surface to be level, uniform and free from streaks and holes complete.

Providing and laying cement concrete pipe of Indian Standard 458:2003 non pressure-2 class of 450 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete.

Providing and laying cement concrete pipe of Indian Standard 458:2003 non pressure-3 class of 900 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete.

Providing second class Burnt Brick masonry with conventional /Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls /in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering complete.

Providing internal cement plaster 12 millimeter thick in single coat in cement mortar 1:5 with neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete.

Providing and fixing Precast divider of M-20 Grade as per approved detaild design and drawing in Position etc. complete

Supplying and Fixing of Molded Shank Raised Pavement Markers/ Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kilogram tested in accordance to ASTM D 4280 Type H and complying to specifications of Category A of MORTH Circular Number RW/NH/33023/10-97 – DO III Dated 11-06-1997. The height, width and length shall not exceed 50 milimetre, 100 milimetre and 102 +/- 2 milimetre and with minimum reflective area of 13 square centimetre on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 milimetre and height not less than 30+/- 2 milimetre) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.

Providing and fixing Mandatory/Regulatory sign boards in cIndian Road Congressular shape of 900 milimetre diameter made out of 2 milimetre aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per Indian Road Congress:67-2012 Table No 8.3 Supported with back support frame 25 milimetre x 25 milimetre x 3 milimetre, duly painted on back side with grey stove enamel paint and supported on one numberof mild steel angle iron post of size 65 milimetre x 65 milimetre x 6 milimetre, 3.45 metrelong, duly painted with with flat oil paint having alternate black and white bands of 25 centimetre width including Galvanised Iron fixtures etc. fixing the boards in Mix-25 grade concrete block of size 60 centimetre x 60 centimetre x 75 centimetre including transportation etc. complete. Class C ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 900 milimetre made out of 2 milimetre aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per Indian Road Congress:67-2012 Table No 8.3 Supported with back support frame 25 milimetre x 25 milimetre x 3 milimetre, duly painted on back side with grey stove enamel paint and supported on one numberof mild steel angle iron post of size 65 milimetre x 65 milimetre x 6 milimetre, 3.45 metrelong, duly painted with with flat oil paint having alternate black and white bands of 25 centimetre width including Galvanised Iron fixtures etc. fixing the boards in Mix-25 grade concrete block of size 60 centimetre x 60 centimetre x 75 centimetre including transportation etc. complete. ClassC ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

Providing and fixing Road Junction/ Information sign boards of size 1.80 x 0.90 metre Prepared on16 guage Mild Steel sheet on frame of Mild Steel angle of size 35 x 35 x 5 milimetre with cross bracing of size 35x35x5 milimetre including painting with one coat of zinc cromate stoving primer and two coats each of green/white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border/ letters/ numeral/arrows, coated with non pealable crystal clear protective transperent coat retaining percent reflection including two angle iron post of size 65 x 65 x 6 milimetre of 3.65 metre long inflated at bottom, drilled on top and painted in white and black bands of 30 centimetre with 4 numbers high strength galvanised iron bolts and nuts of size 10 milimetre diameter and 20 milimetre long. Sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre x 60 centimetre x 75 centimetre size as directed by Engineer-in- charge etc. complete.

Providing and fixing cautionary/ warning sign board of size 60 centimetre having shape of equilateral triangle with apex point upwards. prepared on 16 gauge Mild Steel sheet including painting with one coat of zinc cromate stoving primer and two coats each of white back ground, red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol/ letters/ numerals/ border/ arrow, coated with non pealable crystal clear protective transparent coat retaining percent reflection including one number ofMild Steel Angle iron post of size 50 x 50 x 5 milimetre of 3.65 metre long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 centimetre fixing board and post with 2 numbers high strength galvanised iron bolts and nuts of size 10 milimetre diameter and 20 milimetre long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre x 60 centimetre x 75 centimetre size etc.complete. 60 centimetre equilateral triangleMild Steel sheet with Engineering grade,

Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete by Manual Means.

Excavation for foundation in hard murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete.

Providing and filling Sand in Foundation Trenches as per Drawing and Technical Specification

Providing soling using 80 milimetre size trap metal in 15 centimetre layer including filling voids with crushed sand/ grit, ramming, watering etc. complete.

Providing and laying in situ /ready mix controlled grade of Mix-15 of trap/ granite/ quartzite/ gneiss metal for RCC works in cut off walls/ curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine aggregates of required specifications (V.S.I. Sand finely washed etc.), excluding reinforcement.

Providing and laying in situ / ready mix / ready mix Mix-15 cement concrete of trap metal in foundation including necessary centering, formwork, bailing out water, compacting,curing etc. complete, with ordinary concrete mixer, with V.S.I. Sand.

Providing and laying in situ/ ready mix Mix-30 controlled reinforced cement concrete of trap metal for raft slab including "V" haunches, formwork, scaffolding, compaction by vibrating, finishing curing etc. complete, reinforced cement concrete Grade with reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. with fine agreegates of required specifications (VSI sand finely washed etc.)

Providing and laying in situ/ ready mix Mix-30 plain cement concrete of trap/ granite/ quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of "V" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/ steel formwork centering, (excluding dewatering by means of pump) and including bailling out water and curing finishing in cement mortar 1:3 etc. complete, as directed by engineer in charge, for height upto 5 metre, with Concrete Mixer, with with fine agreegates of required specifications (VSI sand finely washed etc.) The basic rate shall be increased for height above 5.00 metre in following manners (A) Depth upto 10 metre percent extra for rate, (B) Depth upto 15 metre Add 40 percent extra for rate, C) Depth upto 20 metre Add 60 percent extra for rate, (D) Depth upto 20 metre Add 100 percent extra for rate.

Providing and laying in situ/ ready mix controlled Mix-30 cement concrete of of trap/ granite/ quartzite/ gniess metal for reinforced cement concrete caps over piers and abutments including necessary sacffolding plywood/steel formwork, compacting by vibrating, finishing in cement mortar 1:3 and curing etc complete (Excluding reinforcement), with reversible drum type mixer/ concrete batch mix plant (pan mixer), with with fine agreegates of required specifications (VSI sand finely washed etc.)

Providing and laying in situ/ ready mix Mix-30 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled concrete batch mix plant/ pan mixer and fine agreegates of required specifications (VSI sand finely washed etc.) i) Height up to 5 m, normal rate.ii) Depth 5 to 10 m, add 30 percent extra iii) Depth 10 to 15 m, add 40 percent extra iv) Depth 15 to 20 m, add 60 percent extra v) Depth 20 m and above, add 100 percent extra.

Providing and laying in situ/ ready mix, Mix-20 Reinforced Cement Concrete of trap metal for Reinforced Cement Concrete work of ballast walls and kerbs including scaffolding, compaction, formwork finishing and curing etc. complete, excluding reinforcement, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled concrete batch mix plant/ pan mixer and fine agreegates of required specifications (VSI sand finely washed etc.)

Providing, cutting, bending, hooking, tying and laying in position Thermo Mechanically Treated FE 500 steel bars for reinforcement for all Reinforced Cement Concrete works as per detailed drawings etc. complete.

Back filling behind abutment, wing wall and return wall by Granular Material as per drawings and technical specifications etc. complete.

Prividing and fixing pressure relief pipes of 100 milimetre diametre of Asbestos Cement / PolyVenylChloride as per drawing for reinforced cement concrete Raft, Galaries, Returns, Abutments, Wing walls etc. complete.

Providing tar paper bearing including laying in proper position etc. complete.

Providing expansion joints with 25 milimetre thick bituminous pad as per detailed drawings etc. complete.

Providing and laying in situ/ ready mix Mix-20 cement concrete of trap metal for wearing course 8 centimetre thick including compacting, finishing, curing and filling in joints with bitumen etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled concrete batch mix plant/ pan mixer and fine agreegates of required specifications (VSI sand finely washed etc.)

Providing and laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etc. complete.

Providing Reinforced Cement Concrete railing of cast in situ/ ready mix Reinforced Cement Concrete posts with Mix-20 cement concrete of trap metal for horizontal and vertical members as per detailed drawings including reinforcement, scaffolding, centering, formwork, compaction, finishing and curing with watering chemical compound etc. complete with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) (VSI sand finely washed etc.)

Providing vent holes 100 milimetre diameter Galvanised Iron pipe in the slab and wearing course with iron grill at the top and Galvanised Iron pipe at bottom as per drawing etc. complete.

Providing and laying Weep Holes of 100 milimetre diameter Asbestos Cement / PolyVenylChloride pipes as per drawing for abutment returns, return walls etc. complete.

Excavation for roadway in earth soil of all sorts, sand, gravel or soft murum including dressing section to the required grade camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed.

Providing rubble filling of trap stones in foundation including filling voids with sand/grit and compaction etc. complete.

Providing cast in situ / ready mix Mix-20 grade cement concrete for head walls of Cross Drainage work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with Superwisery Control and Data Acquisition, with Natural / Vertical Shaft Impact (VSI) standard Artificial Sand.

Providing and laying in situ / ready mix cement concrete of Mix-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (VSI sand finely washed etc.)

Providing and laying cement concrete pipe of Indian Standard 458:2003 non pressure-3 class of 1200 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete.

AVT INFRASTRUCTURE PRIVATE LIMITED (BID ID -6567380)