Renovation of Main Building Ground Floor, First Floor Water Proof Treatment, Barrack and Boundary Wall in the Campus of Chief Justice Residence, Ranchi High Court Pool For the Year 2023-24

Amount

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I.

Providing two coats of oil bound distemper of approved shade and make over old surface including washing cleaning and papering the walls, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. On this, 1st coat of melamine polish is applied with spray gunusing melamine clear polish and melamine thinner in requiredproportion. This 1st coat is allowed to dry for 24 hrs then this drysurface is again fine wet rubbed smooth, which is further allowedto dry for 12 hrs. The final melamine polish is applied withcompressor pressure spray gun using melamine clear polishand melamine thinner mixed in required proportion complete asper direction of Engineer-in-Charge. (Final coat to be done in 1or 2 layers without gap of time.)

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Water proofing for Old and New Roof Slab Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible material applied with brush, roller or spray for water proofing coating as per manufacturer specifications with following steps:- (a)surface preparation :-Providing and cleaning of concrete surface to remove dust, oil, grease including removal of existing loose paint/ coating, and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete, Ponding test to be done after plugging all outlets and to be checked from soffit to Identify seepage, leakage. On identification of seepage, cement grouting to be done with non shrink expanding admixture of Sika India Pvt.Ltd. /MYK Schomberg Dr Fixit/Fosroc on equivallent. Providing and reparing of all corners and joints such as those between the parapet wall and the roof slab etc shall be chamfered with 150mm X 150 mm fillet of mortar (Cement: sand 1:4) admixed with acrylic polymer of Sika/ Fosroc/MYK Schomberg/Dr Fixit or equivalent. Before chamfering a prime coat shall be given with the slurry of acrylic polymer, Repairing surface irregularities, damaged concretein base slab, dead cracks if any, with an acrylic polymer modified repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete. RK (b)1st Coat-Apply 1st coat of two component acrylic modified, ready to use, flexible cementitious material on surface saturated dry roof and of application, 45 gsm of Fibre glass cloth to lay when the first layer is EDULE OF ATES GOVER Inside wall of Parapet wall upto 600 mm by brush or roller. After 1st coat CHEDULERATES GO /Still green. 1st coat should be applied @1.50 kg/Sqmt/coat. For the SCHEDE OF RATES(C) 2nd Coat :-To apply the 2nd coat of two component acrylic modified, purpose of measurement the entire treated surface will be measured.CHEDULE OF T ready to use, flexible cementitious material right angle to the 1st coat Sqmt/coat. For the purpose of measurement the entire treated surface AND SCHULE OF RAT over the glass fibre laid surface. 2nd coat should be applied @0.7 kg/ will be measured. After three days of drying the 2nd coat, the rain water outlets to be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectification to be done as per satisfaction of E/C The waterproof coating to be LE OF RA GOVERM SALE OF RES GOVERN JOULE OF FATES GOVERN ANDHEDULE OFTE HEDULE CATES GOVE CHEDULE RATES GOV SCHEDULT OF RATES OC SCHEDU OF RATES G AND SCHEDULE RA O SCHELE OF RATES NO SCHELLE OF RATED AND SOBOULE OF RA HAND SC LE OF RA KHAND SHED OF HANDCHEDULE OF HAND SCHEDULE OF OHA SCHEDULE KHO SCHEDULE JHARKHAND SCHED protected from damage before screed over it. Water proofing Brand:- Sika Topseal 109hl / Fosroc Brushbond RFX/ Dr Fixit Pidiffin 2K/MYK Product Performance Chemical Base Part A

Covering of treated surface with PCC :- Providing 50mm thick cement concrete M-20 (1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with approved quality of stone chips of 20mm to 6mm size graded and cleaned sand of F.M. to 3 including screening, shuttering and mixing cement concrete in mixer with admixture in integral water proofing and placing in position, skirting curing, taxes and roaylty all complete as per building specification and directions of E/I. Panels that has been left should be casted next day. There should be 6mm gap between Panels Brand-Sika-plastocrate plus, MYK proof WP 10, Fosroc-Conplast X 4211C, Dr. Fixit Pidproof LW+ or equivalent.

Providing and filling of 6mm thick Groove between 25mm PCC Panels with Polysulphide Sealant (Poring Grade) as per drawings and technical specifications and direction of E/I. (with 18% GST) Brand - Sika-Polysulphide, Forsoc-thioflex 600, Dr. Fixit Pidiseal PS (42P, MYK Seal PS or Equivalent.

Providing 250mm wide brick drain in cement mortar (1:6) with as. 150mm clear depth and 250mm apron including cost of earthwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, leaving 10mm gap for thermal expansion, Single socketed pipes

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Coupler - 110mm

Bend - 110mm

Shoe - 110mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete - 110 mm

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shapewherever required.

Providing and applying plaster of paris putty of 2 mm thickness overplastered surface to prepare the surface even and smooth complete.

Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm)

Finishing walls with Acrylic Smooth exterior paint of required shade :

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer- in-Charge. 80mm thick Cement concrete paver block of M-30 gradewith approved colour, design & pattern.

Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25 mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50X25 mm, fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete.

Providing two coats of snowcem of approved shade and make over old surface including washing cleaning and preparing the walls, scaffolding , curing and taxes all complete as per building specification and direction of E/I.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.

Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350 gms.) with extra socket all complete as per specification and direction of E/I.

Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and direction of E/I.

BRASS STOP COCK - 20mm dia

Providing and fixing N.P/C.P. brass/P.V.C. porcelain shower rose of 15mm inlet etc. all complete as per specification and direction of E/I.

125mm dia C.P. shower

Providing and fixing Gun metal full way valve of approved quality all complete as per specification and direction of E/I.

15mm dia and weight not less than 300 gms.

20mm dia and weight not less than 400 gms.

Making holes in walls for laying G.I. pipe and restoring the same after pipe laying as per specification and direction of E/I.

250 mm thick wall

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I.

600 x 125mm glass shelf complete

Mirrors of 6mm thick glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror

600mm x 450mm size

C.P. brass towel rail 20mm x 600mm with bracket container

C.P. brass dish container medium quality with screw and hinges etc.

Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and dirction of E/I. - 580mm long - With 10 liter low level PVC cistern

Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm PVC waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink without drain board - 610x460 mm bowl depth 200 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc.

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

Polythene water storage tank of mark (e.g sintex/sinter/himgiri/gangotietc) with cover and locking system

Providing and fixing PTMT grating of approved quality and colour. C.P. Gratings

Circular type - 125 mm dia

25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : Second class teak wood

Caraige of materials

Bricks Lead = 8km (7p+1k)

Sand lead = 8 km

Local Sand - 3 Km

Stone metal lead = 20 km

Stone Chips - 22 Km

Pavor Block - 22 Km

Providing & Fixing Water proofing Sheet on terrace of Main Building - Analysis Attached

surface Preparation Removing all dust latience etc and filling of pot holes with a polymar modified modified mortar

Applying primer of Bulkwark LM as a prime coat with a coverage of 250gm of diluted BULWARK LM

Applying glass fiber net of 45 GSM when the coating is wet

Applying 2 coats of BULWARK LM perpendicular to each other on the Glass Fiber

Applying 120 gsm of Geotextile polypropylene mess

Laying of IPS flooring mix with Glass Fibers at a consumption of 900 gms to get a slope of 50mm

BULWARK GUARD AC. 2 component elastomeric coating

Providing and applying Thermo Polyolofin Membrane of BULWARK MAKE of 1.5mm thick fully bonded with Synthetic Resin and joint will be treated with Poly urethane sealant.

Vertical termination of membrane will be done with the help of nail dipped with epoxy to get a better bonding with the surface in the aluminium strip

Supplying & Fixing Wallpaper best quality with all required material nd labour all complete job

Providing & Supplying FABER Ceiling Mount Mesh Filter Decorative Kitchen Chimney, FABER (Hood Curvy Plus BK TC 90), Product id: 5116877-20601562489, Material of Blower Body : Aluminium Material of Blower Blade : Stainless Steel 304, Material of Exhaust pipe : pvc, Shape : Decorative, Filter Type : Mesh Filter, Control Panel Type : Push Button, Mount Type : Ceiling Mount, Wattage of LED( in Watt) : 5, Finishing : Polished,

Providing & Supplying KANENT Wood Chair Already Assembled KANENT (RM-53), Product id: 5116877-63925708425, Length : 450 centimeter, Width : 450 centimeter, Height : 850 centimeter, Chair Features : Carving, Furniture Assembly : Already Assembled Material : Wood

Providing & Supplying neelkraft Iron Black Vertical Garden Stands, Set of 4 neelkraft (VERTCAL GARDEN 4 SET), Product id: 5116877-59257213307, Rod Size 5 centimeter, Thickness of Frame 5 inch, Stand With Wheels No, Warranty - 1 year, Set of Stands - 4 Weight of Stand - 200 kilogram

Providing & Supplying NIDHI PLAY SYSTEM Swings for Preschool - seat mede up ofVirgin Polyethylene and frame material CRC pipe of 25 mmdia. with wall thickness of 20 gauge NIDHI PLAY SYSTEM (NPS-SW-07), Product id: 5116877-64724939210, Swing seat made up of Virgingrade polyethylene plastic : Virgin Polyethylene, Warranty periods : 1 – Year, Test reports in respect of tobe furnished to buyer ondemand: NO, OEM of off ered product is ISO9001:2015 certifi ed : YES, OEM of off ered product is - ISO14001 : 2015 certifi ed : YES

Providing & Supplying THE JASMINE PEARL Stainless Steel Grade 202 galvanized ShelfRack With 5-Shelf (including top shelf) THE JASMINE PEARL (tjp Stainless Steel Shelf Rack), Product id: 5116877-7140555392, Confi guration : With 5-Shelf (including top shelf), Shape of support structure : Rectangular hollow type Ground clearance (mm) : 75 mm, Mode of supply : Assembled Ready To Use, Shelf material : Stainless Steel Grade 202 galvanized Shelf material thickness : 0.8 mm, Support structure material : Stainless Steel Grade 202 galvanized

Providing & Supplying Star Homz 75cm X 45cm Decorative Coir Mats, Star Homz (Decorative Mat (50) 75cm X 45cm), Product id: 5116877- 15373102496, Designation : BC2, Mass : 5400 gm per sq mtr for BC2 Pile height : 25mm for BC2, Colour and design of mats : Stenciled, length X width (cm X cm) : 75cm X 45cm

Providing & Supplying Unbranded Iron POULTRY CAGE, Warranty 1 year NA (POULTRY CAGE), Product id: 5116877-75809164201, Features : GI wire mesh is welded or bolted with Iron angle Warranty : 1 year, Number of tiered - 2, Frame size(Height) - 6 millimeter, Frame size(Length) - 6 millimeter, Material - Iron Frame size(Bredth), 6 millimeter, Frame Material - MS Iron angle

Providing & Supplying Unbranded--NORTH EASTERN HANDICRAFTS ANDHANDLOOMS DEVELOPMENT CORPORATION LIMITED WaterHycinth Rectangle Natural Fibers, Grass, Leaf and Fabric-Handicraft, Unbranded, Manufactured by: NORTH EASTERN HANDICRAFTS ANDHANDLOOMS DEVELOPMENT CORPORATION LIMITED, (HCFC2036), Product id: 5116877-23873287748, Color Beige, Material - Water Hycinth, Installation Type - Free-Standing, Wall Mounted,Floor Standing, Weight 400 gram , Shape - Rectangle Item Description, Decorative Coasters and Table accessories Features, Embossing,Engraving,Carving,Inlay,Ornamentation Work,Paintings,Gem/ Precious Stones Studded,Hand Printed,Hand Painted,HandEmbroidery,Others

Providing & Supplying TRIBESINDIA Wood Rectangular Wood Craft, Length 26 centimeter TRIBESINDIAR (1TMTUTYRJ02041), Product id: 5116877-63772320169, Material Wood, Design Type Wooden Hanger, No. of Hook in Hanger/Holder 8, Does it comply with Make In India - Yes, Height 13 centimeter, Length-26 centimeter, Width 1 centimeter

Providing & Supplying MITHILAsmita--MITHILASMITA ART & CRAFT PRIVATE LIMITED Printed Silk Square Handmade Cushion Covers MITHILAsmitaUR Unregistered Brand Manufactured by: MITHILASMITA ART & CRAFT PRIVATE LIMITED (MIASCC00001), Product id: 5116877-61263280283, Material - Silk, Width (Inch) 14 Length (inch) - 14, Set of - 1

Providing & Supplying Unbranded 2 Seater Sofa With Leather Fabric Cover NA (Unbranded Two Seater Sofa), Product id: 5116877- 66306679154, Backrest Cushion Material - Foam, Density of Cushion of Backrest Material (Kg/Cubic M) - 26, Covering Material for Seat and Backrest - Leather Fabric

Providing & Supplying SYMPHONY Synthetic Honeycomb pads Stand / Trolley Mounted with castor wheels Plastic Body Desert Cooler SYMPHONYR (Movicool DD L125), Product id: 5116877-38574051709, Sump Tank Capacity (minimum) 100 Liters for 5000 nominal capacity, Body Material of the Plastic Body Cooleras per clause 5.1 of IS 3315 latest, Thickness of Body of the Plastic Body Cooler (mm) - 2 millimeter, Drain Plug material - Plastic / Rubber

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

M/S MANOJ KUMAR PANDEY