REPAIR / REPLACEMENT OF OVER HEAD PVC SERVICE TANK, UNSV OLD INLET AND OUTLET PIPE AND ALLIED WORKS IN OTM AND MD ACCN AT GE (WEST) JABALPUR

Amount

Mechanized cleaning and disinfection of Water Storage Tank : 1. Mechanized Dewatering of water storage tank. 2.Removal of sluge laying on the bottom ofwater storage tank through special sludge pumps. 3.Cleaning of internal walls of water storage tank through High Pressure rotary Jets 4.Vaccum cleaning of the floor of water storage tank through industrial vaccum cleaners. 5.Spray of H2 O2 inside the tanks as an antibecterial agent. 6. UV radiation of the tank. 7.Spray of bleaching powder in prescribed quantity after final cleaning of the tank. 8.All inlet & out let pipe line should be found no leakage , if any found that should be change at site by the contractor Note :- 1. writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed 2. Cleaning agency daily take the site from engr auth for claening of PVC tank of different area/Colony and site clear before evening Supply 3. Daily feed back given to Engr Authority by cleaning agency 4. Any tank/ pipe leakage, float valve overflow complaint found by user after tank cleaning, contractor should rectified the defect using serviceable material to satisfaction of users 5. one day before intimation to users for cleaning of tank

(a) Exc 250 and but not exc 500 ltr capacity

(b) 500 ltr capacity

(c)1000 ltr capacity

(d) 2000 ltr capacity

(e) 5000 ltr capacity

Dismantling water tanks capacity Not exc 250 Ltr and removing from site complete all as specified and as directed.

Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from site complete all as specified and as directed.

Dismantling water tanks capacity exc 500 Ltr and n exc 1000 Ltr and removing from site complete all as specified and as directed.

Dismantling water tanks capacity exc 1000 Ltr and n exc 2000 Ltr and removing from site complete all as specified and as directed.

Dismantling water tanks capacity exc 2000 Ltr and n exc 5000 Ltr and removing from site complete all as specified and as directed.

Supplying , fixing & Hoisting and fixing in position and connecting, 250 litres capacity rotational moulded polyethylene water storage tank Loft type,cylindrical, vertical with closed top thred type including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and as directed.

Supplying , fixing & Hoisting and fixing in position and connecting, 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top thred type) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed.

Supplying , fixing & Hoisting and fixing in position and connecting, 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top thred type) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed.

Supplying , fixing & Hoisting and fixing in position and connecting, 2000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top thred type) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed.

Supplying , fixing & Hoisting and fixing in position and connecting, 5000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top thred type) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed.

S&F in repair of 20mm bore Float/ ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for GI pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms)

S&F in repair of 25mm bore,Float/ ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -690 Gms)

S&F in repair of 40mm bore,Float/ ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -690 Gms)

S&F in repair of 15mm bore,Float/ ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -142 Gms)

S&F, in repair, HDPE water storage tank lid black (with arrangement for locking for 500 litres capacity tank complete all as specified and directed.

S&F, in repair, HDPE water storage tank lid black (with arrangement for locking for 1000 litres capacity tank complete all as specified and directed.

S&F, in repair, HDPE water storage tank lid black (with arrangement for locking for 2000/5000 litres capacity tank complete all as specified and directed.

Taking down or taking up steel water tubing , galvanised from trenches / walls / floors including all fittings, segregatting and stacking the serviceable pipes and fittings properly at site for re-use all as specified and directed for following bore of pipe :

(a) 15mm dia

(b) 20mm dia

(c) 25mm dia

(d) 40/50mm dia

Re-laying/refixing only old serviceable steel water tubing, galvanised and connections in new or old situation / allignment including all new fittings (on Walls, floors etc, ) of pipe as recovered , including de-scaling /cleaning of pipe (internally and externally) cutting and threading of tubing ends all as specified and directed. of following size :-

(a) 15mm dia

(b) 20mm dia

(c) 25mm dia

(d) 40mm dia

S & F steel water tubing galvanised ,medium grade with all fittings and fixed complete to walls or in floors , trenches for bore of pipe following sizes: -

(a) 15mm dia

(b) 20mm dia

(c) 25mm dia

(d) 40mm dia

(e) 50mm dia

S & F in repair gate / globe valves cast copper alloy screwed both end down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed bore of following size : -

( a ) 15 mm bore.

( b ) 20 mm bore.

( c ) 25 mm bore.

(d ) 40 mm bore

(e) 50 mm bore

M&L for Demolition of reinforced cement concrete of roof tank of any description complete all as specified and as directed.

M&L for 50mm thick cement concrete (1:2:4) type B1, using 20mm graded stone aggregate laid over roof as in platforms for water tanks, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

S&F in repairs Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe 410-W (Gde-E-250) quality-complete all as specified and directed.

Supply only, integral water proofing compound complete all as specified and as directed.

S&F in repairs mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc,. Complete drilled for fixing of steel sheeting or other covering . Door etc to be prepaired for hanging or sliding with and including either hooks or steel hanging door fittings also fastening and fixing complete conforming to Fe-290 (Gde-E-165) complete all as specified and as directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S&F in repair 15mm bore, Bib cock, PTMT, any colour, high pressure, screwed for iron pipe, minimum weight 120 gms complete all as specified and as directed.

S&F In repair 15mm bore, Stop Cock, PTMT, any colour, high pressure screwed for iron pipe, minimum weight 90 gms complete all as specified and as directed.

Disconnecting, setting aside (or lowering if required) and Cleaning & removing all scale and dirt etc from HDPE water tanks of 500 litres capacity (Tanks placed on top of roof) and from mouths of circulating pipes etc including washing the tank with bleaching powder and hoisting, reconnecting and re-fixing in position including writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed.

Disconnecting, setting aside (or lowering if required) and Cleaning & removing all scale and dirt etc from HDPE water tanks of 1000 litres capacity (Tanks placed on top of roof) and from mouths of circulating pipes etc including washing the tank with bleaching powder and hoisting, reconnecting and re-fixing in position including writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete all as specified and as directed.

Disconnecting, setting aside (or lowering if required) and Cleaning & removing all scale and dirt etc from HDPE water tanks of 2000 litres capacity (Tanks placed on top of roof) and from mouths of circulating pipes etc including washing the tank with bleaching powder and hoisting, reconnecting and re-fixing in position including writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete all as specified and as directed.

S&F in replacement tank connector GI 15mm bore complete all as specified and as directed.

S&F in replacement tank connector 20 mm bore complete all as specified and as directed.

S&F in replacement tank connector 25mm bore complete all as specified and as directed.

S&F in replacement tank Connector 40mm bore complete all as specified and as directed.

S&F in replacement tank connector 50mm bore complete all as specified and directed.

S&F in repair 20mm bore bib tap cast copper alloywith crutch/buterfly handle screwed for iron pipe ccomplete all as specified and as directed.

S&F in repair socket, elbow, reducer, nipple, Tee etc of any size or type suitable for GI pipe of bore 15mm as per requirement including cutting and threading of GI tubing complete all as specified and as directed.

S&F in repair socket, elbow, reducer, nipple, Tee etc of any size or type suitable for GI pipe of bore 20mm as per requirement including cutting and threading of GI tubing complete all as specified and as directed.

S&F in repair socket, elbow, reducer, nipple, Tee etc of any size or type suitable for GI pipe of bore 25mm as per requirement including cutting and threading of GI tubing complete all as specified and as directed.

S&F in repair socket, elbow, reducer, nipple, Tee etc of any size or type suitable for GI pipe of bore 40mm as per requirement including cutting and threading of GI tubing complete all as specified and as directed.

S&F in repair socket, elbow, reducer, nipple, Tee etc of any size or type suitable for GI pipe of bore 50mm as per requirement including cutting and threading of GI tubing complete all as specified and as directed.

S&F in repair Union of any type suitable for GI pipe of bore 15mm as per requirement including cutting and threading of GI tubing complete all as specified and as directed.

S&F in repair Union of any type suitable for GI pipe of bore 20mm as per requirement including cutting and threading of GI tubing complete all as specified and as directed.

S&F in repair Union of any type suitable for GI pipe of bore 25mm as per requirement including cutting and threading of GI tubing complete all as specified and as directed.

S&F in repair Union of any type suitable for GI pipe of bore 40mm as per requirement including cutting and threading of GI tubing complete all as specified and as directed.

S&F in repair Union of any type suitable for GI pipe of bore 50mm as per requirement including cutting and threading of GI tubing complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m deep & not exceeding 1.5m wide or area not exceeding 10 Sqm on plan, in any type of soil and getting out for foundation, trenches or laying of electric cable or pipes complete all as specified and as directed.

Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

Removal of excavated materials (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

RADHEY CONSTRUCTION (BID ID -3059592)

JUPITER TRADERS (BID ID -3059836)

kiran electrical and hardware centre (BID ID -3058920)

M K ENTERPRISES (BID ID -3059859)

Sachdeva Enterprises (BID ID -3059726)