E1-0089-2026-7-ERODE CITY MUNICIPAL CORPORATION

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and laying of the following size of PVC pipe including cutting threading and jointing with specials including cost of pipe and specials and including labour for cutting threading jointing etc., complete as per standard specification

a) 32 mm dia PVC pipe 15Kg/cm2

b) 32mm dia PVC TEE

c) 32mm dia PVC Elbow

d) 25mm dia PVC Pipe Medium 15Kg/Cm2

e)25mm dia PVC Elbow

f) PVC Screw Down Tap Heavy Type 15mm dia

g) 32mm GM Gate Value

h) 75mm dia PVC pipe

i) 75mm dia PVC elbow

j) 110mm dia PVC pipe

k) 110mm dia PVC elbow

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with “P” or “S” trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn,teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

Supply and run of 2 of 1.5sq.mm. PVC insulated SC unsheathed FRLS copper conduct or of 1100V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 1.5sq.mm copper wire with painting of suitable colour

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 2.5 sq mm copper wire with painting of suitable colour.

Supply and fixing of 4Feet LED 20W Fitting with LED 20W tube (LowerEnd) complete with TW round blockson wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting (SD 442)