Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.9 LAccepted-AOC C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹49.9 L+₹4.0 L (8.69%)Rejected-Finance RM 01 RIDHISIDHI I SRI GANGANAGAR 335001 RAJ | SRI GANGANAGAR | SRI GANGANAGAR | RAJASTHAN | 335001 | L2 | Rejected-Finance Highest bid quoted other then L1 |
Tender Value
Refer Docs
EMD Value
₹95,600
Closing Date
4 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Sri Ganganagar
Garrison Engineer Sri Ganganagar, Military Engineer services , Sri GanganagarCantt Rajasthan-335001
ADDN/ALTN OF BLDG NO P-1479 AND PROVN OF TOILET AT REAR GATE LOCATION AT MIL STN SRI GANGANAGAR
2023_MES_624905_2
GE SGNR/TOK-58 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
Sri Ganganagar(Raj)
D Class a(i) and b(i) and for un-enlisted, refer NIT para 8.
7 documents required · 7 mandatory
₹500
GE Sri Ganganagar
₹95,600
Yes
14 Mar 2024
13 Nov 2023
6 Dec 2023
13 Nov 2023
4 Dec 2023
20 Nov 2023
Amount
Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.50 Mtr in depth for foundation, etc., not exceeding 10 Sqm on plan in soft /loose soil; & getting out in any type of soil complete all as specified and directed by Engineer - in - Charge.
M&L for PCC as in foundation filling and mass concrete type D-2 1:4:8 (40mm graded stone aggregate) complete all as specified and directed by Engineer - in - Charge.
Returning, filling in, including spreading, leveling, watering and well ramming in soft/loose soil in layer not exceeding 25 cm thick complete all as specified and directed by Engineer - in - Charge.
Removing excavated material (Soil) n exc 50 m and depositing where directed at a level n exc 1.5m above starting point complete all as specified and directed by Engineer - in - Charge.
Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work in flat for fair finished surface complete all as specified and directed by Engineer - in - Charge.
Form work to column for fair finished surface of concrete complete all as specified and directed by Engineer - in - Charge.
Form work to sides and soffits of floor and roof Beam etc complete all as specified and directed by Engineer - in - Charge.
Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) complete all as specified and directed by Engineer - in - Charge.
Form work to edges of concrete of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) complete all as specified and directed by Engineer - in - Charge.
M&L for RCC Design mix M-30 (using 20mm graded aggregate ) as in foundation including raft, footings, foundation beams, plinth beam and the like complete all as specified and directed by Engineer - in - Charge.
M&L for RCC Design mix M-30 (using 20mm graded aggregate ) as in Column complete all as specified and directed by Engineer - in - Charge.
M&L for RCC Design mix M-30 (using 20mm graded aggregate ) as in lintel beam and roof beam complete all as specified and directed by Engineer - in - Charge.
M&L for RCC Design mix M-30 (using 20mm graded aggregate ) as in slabs suppotred on walls, beams and columns complete all as specified and directed by Engineer - in - Charge.
M&L for RCC Design mix M-30 (using 20mm graded aggregate ) as in chajjas and similar work complete all as specified and directed by Engineer - in - Charge.
S & F for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed by Engineer - in - Charge.
S&F for TMT bars 5mm dia. and over up to and including 10 mm dia. in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia complete all as specified and directed by Engineer - in - Charge.
Providing and applying APP based polymeric membrance minimum 3mm thick reinforced with polyster non wove fabric (wt n.less than 150gm/sqm) land on primed surface by forced application keep overlap margin for minimum 100mm heat both the overlaps and use round tipped trowel to seal overlap excess compound shold be smoothened and pressed into seam using hot trowel including and Applying evenly a tack coat of Industrial bitumen 85/25 at the rate of 1.2 Kg per sq.m. including cleaning surfaces with wire brush / coir brush to freee from all loose materials like dust, dirt ect and make wattah / coving of 75x75 mm with PCC 1:2:4 type B1 at all horizontal and vertical joints to avoid right angle turning complete all as specified and directed by Engr-in- charge.
M&L brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engineer - in - Charge.
M & L brick work with sub class 'B' ' Bricks straight or curved on plan to any radius in half brick thick wallsbuilt in cement mortar 1:6 complete all as specified and directed by Engineer - in - Charge.
M&L 15mm thick rendering in CM 1:6 to brick / concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.
M&L 15mm thick, rendering in cement mortar CM 1:4 to brick/concrete wall surfaces in two layers first layer 10mm thick and second layer 5mm thick with WPC 3% by wt of cement finished even & smooth without using extra cement complete all as specified and directed by Engineer - in - Charge. (Note : Rate of WPC included in this item, no extra will be paid.)
M&L 5 mm thick rendering in CM 1:3 on fair faces of concrete surfaces as on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.
M&L Hardcore of broken stone or boulders, gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer - in - Charge. (Broken stone or boulders)
M&L 25 mm thick cement concrete flooring type B-0, 1:2:4 (12.5 mm graded stone aggregate) finish even and fair complete all as specified and directed by Engineer - in - Charge.
M&L for 75mm thick Cement concrete type C-2 , 1:3:6 (40 mm graded aggregate) as in plinth protection laid in bay n.exc 2.5m length complete all as specified and directed by Engineer - in - Charge.
M&L machine cut Kota stone slab flooring 20-25 mm thick over 20 mm thick screed base in cement 1:4, laid and jointed with grey cement slurry mixed with pigments to match the shade of the slabs including rubbing, rounding of edges (moulding of edges) and polishing complete all as specified and directed by Engineer - in - Charge.
All as per above item No 30 but in vertical surfaces like dados or skirting over 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.
S & F factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer - in - Charge.
S & F factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed by Engineer - in - Charge.
M&L for mild steel work as in frame work/guard bar for door and window and as similar work including cutting tops to shape, drilling holes, notching for wire etc conforming to Fe-290 grade E-165 complete all as specified and directed .
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engineer - in - Charge.
S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm each pane of any size complete all as specified and directed by Engineer - in - Charge.
S & F pressed steel door frames with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., size of frame 105x60mm complete all as specified and directed by Engineer - in - Charge.
M&L Cement concrete 1:2:4 type B–0(12.5 mm graded stone aggregate) filling of pressed steel frame and hold fast blocks etc complete all as specified and directed by Engineer - in - Charge.
M & L for applying two coats of synthetic enamel paint (ordinary tint) over one coat of red oxide primer on new steel surface over 10 cm width or girth, not otherwise described including preparation of surface complete all as specified and directed by Engineer - in - Charge.
S & F for 35mm thick factory made IInd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer - in - Charge.
M&L for preparation of surfaces of new wooden Surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer - in - Charge.
S& F aluminium anodised barrel tower bolts of extruded section and fixed 150 mm size complete all as specified and directed by Engineer - in - Charge.
S&F 300 mm mild steel sliding door bolts, clip type, stone enameled block with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, 4 on bolt plate 2 on staple plate complete all as specified and directed by Engineer - in - Charge.
S & F aluminium handles cast type anodised, 150mm long complete all as specified and directed by Engineer - in - Charge.
S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor and overall length of cover plate 140 mm complete all as specified and directed by Engineer in charge.
S&F for 1.25mm thick Steel rolling shutters , without ball bearing , as specified including top cover , anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete ; gear operated type with bevel gear box and crank handle complete all as specified and directed by Engr-in-charge.
Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed by Engineer in charge.
M&L PCC 1:2:4 (40mm graded stone aggregate) type B2, in foundation of posts and struts complete all as specified and directed by Engineer - in - Charge.
M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 complete all as specified and directed by Engineer - in - Charge.
M&L mild steel work as in framed work i.e. Angle iron/flat iron including caps , bases, splices, all lattice bars, cutting tops to shape, drilling holes, notching for wire etc conforming to Fe-290 grade E-165 complete all as specified and directed by Engineer - in - Charge.
S&F Pre-Painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer - in - Charge.
S&F for Pre-Painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge covering to wall, fixed with self tapping screws complete all as specified and directed by Engineer - in - Charge.
S&F mild steel screw bolts (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal/ square nut not exceeding 5cm long complete all as specified and directed by Engineer - in - Charge.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed by Engineer - in - Charge.
M&L for 75mm thick Cement concrete type D-2 , 1:4:8 (40 mm graded aggregate) as in sub base of floor complete all as specified and directed by Engineer - in - Charge.
M&L precast machine pressed rubber moulded coloured concrete interlocking paver blocks any shape and sizeconfirming to IS 15658-2006 of 60 mm thickness, M -35 grade,set,jointed & pointed in neat cement slurry in floor/pavings/path etc with grey cement and pigment including 25mm thick sand cushioning complete all as specified and directed by Engineer - in - Charge.
M&L providing precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in block masonry with solid blocks exceeding 10 cm width and setting as in curb stone complete all as specified and directed by Engineer-in-Charge.
M&L PCC 1:3:6 (40mm graded stone aggregate) type C2, in foundation of posts and struts complete all as specified and directed by Engineer - in - Charge.
S&F 10 mm dia MS round bar for fixing of chain link fencing with post complete all as specified and directed by Engineer - in - Charge.
Supply only chain link fencing galvanised mild steel hot dipped(IS -2721) of mesh size (75mm x75mm) and any wire dia complete all as specified and directed by Engineer - in - Charge..
Fixing only of chain link fencing including above galvanised mild steel to any type of standard rails vision of binding wire complete all as specifed and directed by engineer-in-charge.
Providing and applying waterproofing work with polyester reinforced APP membrane sheet of thickness 3mm by Mechanically clean the RCC slab and wall with wire brush / coir brush to freee from all loose materials like dust, dirt ect make wattah / coving of 50x50 mm at all horizontal and vertical joints to avoid right angle turning with polymer based mortar. Apply one coat of solvent based bitumen primer on cleaned & leveled surface @ 3-5 Sqmtr / ltr per coat. Unroll after application of primer. Align the roll correctlv & re-roll it in alignment before torching. Use gas burner to heat substrate and underside to softening points. When the embossing disappers, roll forward and press fimly against substrate to bond from the lower end towards the higher end. Keep overlap margin for minimum 100mm. Heat both the overlaps and use round tipped trowel to seal overlap. Excess compound shold be smoothened and pressed into seam using hot trowel complete all as specified and directed by Engineer - in - Charge.
M&L for PCC 1:2:4 type B2(20 mm graded aggregate) as in roof kerbs or mud stops, rounded or cmamfered on edges etc complete all as specified and directed by Engineer - in - Charge.
M&L for Cement concrete tiles 25cmx25cmx22mm thick,machine pressed ; set, jointed and pointed in neat cement slurry in roof terrace, and cut and polished including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even & fair and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.
M&L two coats of Acrylic emulsion on newly pastered wall surfaces over one coat of wall care putty (1.5mm thick) over one coat of primer including preparation of surfaces complete all as specified and directed by Engineer - in - Charge.
M&L one coat of Acrylic emulsion on newly pastered ceiling surfaces over one wall care putty (1.5mm thick) over one coat of primer including preparation of surfaces complete all as specified and directed by Engineer - in - Charge.
M & L for applying two coats of Premium Acrylic Smooth exterior paint (Apex) with silicone additives on external wall surfaces including one coat of wall care putty (1.5mm thick) over one coat of primer complete all as specified and directed by Engineer - in - Charge.. Work will be carried out by mechanical means.
M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm laid in floor set and jointed in cement slurry including 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finish even & fair and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.
M&L glazed ceramic coloured tiles, (600x300)x7mm thick as on vertical surfaces like dados or skirting over 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.
S & F of Fiberways Brand or equivalent Fiber Glass Reinforced plastic (FRP) Door Frames of three legged of cross section 90mmx45mm having single rebate of 32mmx45mm having single rebate of 32mmx15mm to receive shutter of 30 mm thickness. The laminate door frame molded with fire retardant grade unsaturate polysterresinn and chopped mat.Doorframe laminate shall be 2 mm thick and shall be filled with suitable wooden black in all the three legs. The frame shall be covered with fiberglass from all sides MS stay shall be provided at the bottom to steady the frame. complete all as specified and directed by Engineer - in - Charge.
S & F of fiberways brand 30mm thick glass fiber reinforced plastic (FRP) paneled door shutter of required color and approved brand and manufacture made with fire retardent grade unsaturated polyster resin moulded to 3mm thick FRP laminated for forming hollow rails and style with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels for conforming to IS:14856-2000 complete all as specified and directed by Engineer - in - Charge.
S&F 100 mm Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 all as specified and directecd by Engr-in-charge.
S& F aluminium anodised barrel tower bolts of extruded section and fixed 200 mm size complete all as specified & directed by Engineer in charge.
S&F Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required complete all as specified and directed by Engineer - in - Charge.
S&F Aluminium window and ventilator shutters, fixed type without sash bar, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, powder coated aluminium snap beading screws, powder coated aluminium fitting such as hinges type B-21 100 mm size (2 Nos), suitable handle (2 Nos) of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed by Engineer - in - Charge.
S&F Aluminum Grill any pattern fixed with Aluminum Frame complete all as specified and directed by Engineer - in - Charge. Note- Aluminum frame shall be Measured and paid seperately
M&L 20 mm thick granite(Approved colour) table moulded and polished machine cut in jambs,pillars ,skirting/dado, sehlves etc laid over 15 mm thick cement mortar 1:3 screed set and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing polishing complete all as specified and directed by Engineer - in - Charge.
S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer - in - Charge.
S & F for stainless steel tubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed by Engineer - in - Charge.
S&F vitreous china wash down water closet pan (Pedstal pattern), white excluding fixing bolts, flushing cistern and flush pipe, including plastic water coset seat, back closed pattern with flat bottom, and cover and mild steel chromimum plated hinging device & trap and including jet spray/nozzle with pvc pipe 15mm bore dia complete all as specified and directed by Engineer - in - Charge.
S&F PVC low level flushing cistern 10 lirs capacity, valve-less, syphonic action type, white, with inlet, ball valve, float, and handle including brackets, PVC connections 15 mm size with PTMT nuts of length 450 mm ,including 32mm bore flush pipe of polyethylene of low or high density of PVC complete all as specified and directed by Engineer - in - Charge.
S&F vitreous china wash hand basin, white flat back of size 550mmx400mm including brackets, 32mm bore brass chromimum plated waste coupling & 32mm bore low density ployethylene (LDPE) flush pipe of pressure rating 6Kgf/Sq cm (1.00 M long) complete, including 15mm bore 450 mm length PVC connection with PTMT nuts complete all as specified and directed by Engineer - in - Charge.
Supply only swan neck pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure of 15 mm bore diawith or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer - in - Charge.
S&F vitreous china urinals, Full stall type flat back complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe including waste pipe and trap complete all as specified and directed by Engineer - in - Charge.
S&F Urinal spreader of PTMT any colour for fixing 15 mm dia pipe complete all as specified and directed by Engineer - in - Charge.
S & F waste couplings of stainless (half or full threaded) of 32 mm complete all as specified and directed by Engineer - in - Charge.
S&F low density polyethylene pipes (LDPE) 32 mm*800 mm long of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and directed by Engineer - in - Charge.
S & F long body bib taps with wall flange 15mm dia, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down screwed for iron pipe complete all as specified and directed by Engineer - in - Charge.
S&F Grating doom 100mm dia PTMT (minimum weight 25gms) complete all as specified and directed by Engineer - in - Charge.
S&F Angle valves, chromium plated cast screwed down, high pressure copper alloy, with crutch or butterfly handles, screwed both ends for but fancy type 15mm bore iron pipe or complete all as specified and directed by Engineer - in - Charge.
S&F steel water tubing galvanised 15mm bore, “medium grade” with all fittings and fixed to walls or in floor complete all as specified and directed by Engineer - in - Charge.
S&F steel water tubing galvanised 20mm bore, “medium grade” with all fittings fixed to wall or in floor complete all as specified and directed by Engineer - in - Charge.
S&F steel water tubing galvanised 25mm bore, “medium grade” with all fittings fixed to wall or in floor complete all as specified and directed by Engineer - in - Charge.
S&F health faucet 2 in 1 with 1.5 m tube and hook of same complete all as specified and directed by Engineer - in - Charge.
S&F rotational moulded polyethylene water storage tank 1000 ltrs capacity three layered white coloured (Cylindrical vertical with closed top) hoisted and fixed in position and including 25mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 455gms) complete all as specified and directed by Engineer - in - Charge. (Note : Water Tank shall be ISI Marked)
S & F for 20mm dia Gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer - in - Charge.
S & F for 25mm dia Gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer - in - Charge.
S&F stainless steel toilet paper holder complete all as specified and directed by Engineer - in - Charge.
S&F 5mm thick Glass Shelf Glass fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed by Engineer - in - Charge.
S&F for towel ring brass glossy finish complete all as specified and directed by Engineer - in - Charge.
S&F soap dish brass glossy finish complete all as specified and directed by Engineer - in - Charge.
S&F 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed by Engineer - in - Charge.
S&F 75mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed by Engineer - in - Charge.
S&F 100mm bore cast iron bends sand cast (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer - in - Charge.
S&F 75mm bore cast iron bends sand cast (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer - in - Charge.
M&L for CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer - in - Charge.
S&F door closure hydraulically regulated, designation No 3 universal type suitable for door shutters (Aluminum body) of any size complete all as specified and directed by Engineer - in - Charge.
M & L for Concrete bed to drain pipes including packing under , and haunching against the sides of pipes after they are laid and tested ;in cement concrete 1:3:6 type C-2 for 200mm bore dia of pipe complete all as specified and directed by Engineer - in - Charge.
S & F for 200mm bore (internal dia) RCC class NP2 pipe, grade ‘A’, laid on concrete bed to required slope, jointed and tested complete all as specified and directed by Engineer - in - Charge. (concrete bed shall be measured and paid for separately).
Material and Labour for consturction of brick masonary valve pit chamber size 60x60x60 cm (internal dimension) using sub class 'B' bricks complete including excavation & earth work, returning filling and disposal of surplus soild to distance not exceeding 50m and deposited where directed, PCC (1:3:6) type C-2 using 40 mm graded stone aggregate in foundation, coping on top in PCC (1:2:4) type B-1 using 20mm graded stone aggregate, brick work in cement mortar (1:4), inner plaster 12mm thick in cm (1:3) finished even and smooth and pointing flush externally as the work proceeds in the same mortar, MS sheet cover 3.15 mm thick mounted on angle iron frame of size 40 x 40 x 6mm with handle and locking arrangement duly painted wtih two coats of synthetic enamel paint over a coat of red oxide primer and embeded portion of MS work duly applying balck bitumenous paint before embeded complete all as specified and directed by Engineer - in - Charge
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer - in - Charge.
M&L providing precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in block masonry with solid blocks exceeding 10 cm width and setting as in kerb stone complete all as specified and directed by Engineer-in-Charge.
Supply only Water proofing compound complete all as specified and directed by Engineer-in-Charge.
Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer - in - Charge.
Dismantling and taking down fluorescent/LED tube light/wall light/ ceiling light single/bulk head / tube light / mirror light double of any wattage or size street light fittings for repair / Refixing purpose complete all as specified and directed by Engineer - in - Charge.
Fixing only LED lights fitting 1x 20/25W, 220V, LED tube light/ security light / bulk head / mirror light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer - in - Charge.
M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for modular metal flush boxes suitable length and thickness for mounting, switches, sockets,fan regulator with modular cover plate with frame and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No -115 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No -115 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No. 115 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No. 115 here in before but for call bell point complete all as specified and directed by Engineer - in - Charge.
S & F modular switch 5/6 Amps single pole one way,one module with White cover plate with frame, alongwith metal flush box 1/2 module complete all as specified and directed by Engineer - in - Charge.
S & F modular switch socket combination 5 pin, type 5/6 Amps5 in 1 flush type with White cover plate with frame, 3 module alongwith Metal flush box 3 module complete all as specified and directed by Engineer - in - Charge.
S & F modular switch socket combination 6 Pin, 5/16 Amps flush type with White cover plate with frame, 3 module alongwith Metal flush box 3 module complete all as specified and directed by Engineer - in - Charge.
S & F modular socket outlet 5 pin 5 Amps flush type with White cover plate with frame, 2 module alongwith Metal flush box 2 module complete all as specified and directed by Engineer - in - Charge.
S&F modular bell push 5 Amp, one module with White cover plate with frame, alongwith metal flush box 1/2 module complete all as specified and directed by Engineer – in - Charge.
S & F modular stepped type, fan regulator not less than 120 watt for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge
S & F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer - in - Charge.
S & F switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F switch socket combination 6 Pin, 15/16 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S&F Electronic bell AC 230 Volt single pole ding dong type complete all as specified and directed by Engineer - in - Charge.
S & F ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer - in - Charge.
Supply and fix in replacement Industrial socket metal clad plug and socket with MCBs single pole 20 Amp complte all as specified and directed by Engineer - in - Charge.
S&F in replacement round recess mounted LED edge lit slim downlight 12 watt (6500K) with opal diffuser and separate electronic driver die- cat aluminum housing fineshed in premium white powder coating efficacy 100lm/w complete all as specified and directed by Engineer - in - Charge.
S & F of T/L Fitting LED batten with aliminium housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge.
S&F security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge .
S & F Water tight bulk head fitting,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery ,glass well,and including 10 watt LED lamp all as specified and directed by Engineer - in - Charge.
S & F angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge.
S&F LED lamp 9W for angle holder complete all as specified and directed by Engineer - in - Charge.
S&F Decorative, wall mounting, made of polycorbonate suitable for 9 W LED lamp, B22 base complete all as specified and directed by Engineer - in - Charge.
S & F in repair compact & decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1X10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified and directed by Engineer - in - Charge.
S & F of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLSH stranded copper conductor drawn in and including steel dia 25mm “medium quality” conduit including 4.00 Sq mm (Nominal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and covers including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge. Note : Two runs of cable + one run for cable earth + one run of pvc conduit shall be measured as one run.
S & F sheet metal enclosure for double door BDs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 4 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.
S & F MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.
S & F MCB ‘C’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.
M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point complete all as specified and directed by Engineer - in - Charge.
Excavation in trenches not exceeding 1.5 mtr wide and not ecxceedinf 1.5 mtr depth for laying of cables including taking up or down the LT cable complete all as specified and directed by Engineer - in - Charge.
Sand cushioning with dry and clean river fine sand (for under ground cable) 8 cm before laying cable and 15 cm after laing and punned to 18 cm after laying of cable complete all as specified and directed by Engineer - in - Charge. Note :- (i) Punned thickness shall be considered for payment purpose (ii) Approved river sand free from, vegetations, grass and other deleterious substances sahll be used.
Supply and lay standard size bricks subclass B type complete all as specified and directed by Engineer - in - Charge.
Supply and lay jointing and testing and commissioning in replacement of 35 Sqmmx4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer - in - Charge.
S&F 3 pin telephone socket RJ-11 with metal flush box having holes for 20mm conduit entry for telephone connection complete all as specified and directed by Engineer - in - Charge.
S&F RJ-45 data socket for connection of data network complete all as specified and directed by Engineer - in - Charge.
S&F rigid non metaliic PVC conduit 20mm dia inclusive of all tees, bends , elbows ,reducers , bell mouth tube ends and complete with all fixing accessories such as couplers , lock nuts, saddles, pipe hooks etc complete all as specified and directed by Engineer - in - Charge.
Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engineer - in - Charge.
S&F in replacement MCB protected Socket -25Amps in renewal with plastic box and plug top vertical din rail mount type suitable to operate at 240V current rating range 25A , 50Hz 1Ph, complied IS specification 13032 & 8623 complete all as specified and directed by Engineer - in - Charge.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed by Engineer - in - Charge. (Note : The exhaust fan shall be ISI markded)
Supply and lay jointing and testing and commissioning in replacement of 10 Sqmmx2 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by engineer in charge.
M&L for galvanized steel water tubing medium grade of 25 mm bore with & including all fittings complete, laid in trenches,and connections of 25 mm bore, complete all as specified and directed by Engineer - in - Charge.
M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings complete, laid in trenches,and connections of 20mm bore, complete all as specified and directed by Engineer - in - Charge.
Supply & fixing mild steel clamps made of flat iron 40x6mm in two halves for tapping through 40 to 100mm bore GI/DI water pipe line including drilling and welding of 15-25mm GI socket and necessary rubber insertion, nut, bolts & washers complete all as specified and directed by Engineer - in - Charge.
Supply , install, test and commissioning of 'Silent type' (accoustic enclosure type) Diesel Engine driven generating set of capacity 40 KVA, 415 volts, 3 Phase 4 wire, 0.8 power factor and 1500 RPM at NTP, electric start, directly coupled and mounted on common base frame with coupling of suitable size to water cooled diesel engine of rated power output SUITABLE BHP as per IS: 10001/10002 and alternator as per IS: 13364 complete with foundation, AVM pads, control panel, fuel tank of suitable capacity with fuel lines of heavy duty MS-pipe duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and suitable battery of 12 volts as per OEM recommendation 1 No size fixed on angle iron frame with necessary meters and sound proof canopy as per latest CPCB norms and seperate bettery charging system of suitable capacity with all accessories, tool box and tools/spares as provided by the manufacturer including the following:-
(A) Prime Mover :- Vertical diesel engine of suitable capacity water cooled (radiator mounted close circuit as per BS 649 or IS 10002 direct injection type). The DG set shall be capable of running 24 Hrs on full load. Engine shall be equipped with all standard fittings as per manufacturer's recommendation and mounted on common base frame with following:- (a) RPM cum hour meter. (b) Battery charging alternator with inbuilt regulator. (c) Ignition and starting keys with push button switch. (d) Lubricating oil pressure gauge, oil and water temperature gauges. (e) Suitable battery as recommended by manufaturer/ OEM with battery leads of suitable size of copper cable. (f) Self starter motor of suitable capacity. (g) PCC foundation for generating set as per recommendation of manufacturer (h) Exhaust pipe (j) Exhaust silencer industrial type to maintain noise level. (k) Maintenance manual and part catalogue. (B) Alternator :- Alternator of rating 40 kVA, 3 phase 50 cycle, 415 volts, 4 wire AC supply 0.8 PF at NTP for running at 1500 RPM, copper winding with class 'H' insulation, self excited, self regulated, screen protected, brushless mounted on common base frame coupled with above engine. The alternator shall be confirming to BS 2613/IS-13364
"Guarantee :- The contractor shall submit test certificate & guarantee for three years from manufacturer for any manufacturing defects/service maintenance from the date of completion of work. Notes :- (i) Contractor shall bear all cost for testing of DG set including providing all T&P, transport etc. (ii) 12 Hrs testing to be carried out by IEM while commission of DG Sets and contractor will intimate the same to department and POL for testing will be provided by contractor for 12 Hrs testing. (iii) If the testing will failed than contractor will bear all the expenditures. (iv) Latest/revised BS and IS code shall be applicable for DG set. (v) The accepting officer, at his discretion, may detail his representative to witness the factory testing (routine tests as per IS) before dispatch from the manufacturer's factory. For this, the contractor shall give one month notice to the GE for consideration by AO and detailment of rep."
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and directed by Engineer - in - Charge.
Supply and lay un reinforced ISI marked pre cast concrete cable cover class LV type I flat size 250 x 150 mm x 40mm complete all as specified and directed by Engineer - in - Charge.
M&L earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required using 32X6 mm galvanised iron strip complete all as specified and as directed by Engineer-in-Charge.
Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.
KHANNA CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .