Maintenance- Repairs- Replacement of Civil items for various projects executed under Srinagar Smart City Limited for a period of 2 years

Providing and Applying Cold Plastic Paint two component rolled on surfacing material solvent free, high build two pack seamless, tough anti skid material, in single application which has property lof attaining 2 m average thickness in any colour as approved by the employer, based on glass and colour retaining acralic cross linking resin system for Cycle track and similar applications including cost for hiring of air compressor for cleaning surfce to be painted, surface cleaning, primer of approived brand, and cost fo all material labour etc on bitumen or conrete surface. Work shall be carried out as per IRC 35-2015 and as per directions of Engineer-In-charge. the finished surface shall be levelled, uniform and shall be free form streaks and holes

MS Steel Bollards in built up tubular (round) 1.2 m height, 0.2m Outer dia 5mm thick with bottom plate of 0.3mx0.3m, 3mm thick top cover 0,2m dia including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. Embedded with 1:3:6 mix complete job

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Pre-casting & Placing in position 300 mm dia Bollards 1200 mm high of required shape embeded 150 mm in cement concrete 1: 3: 6 (1 cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size) including dismantling of existing bollard(if required) and necessary excavation of size 450x450x450mm deep for the same in bitumen/concrete pavement at specified spacing.

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Rough chisel dressed

Flooring with Cobble stone of approx. Size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of Engineer-in-charge.

Pre-casting & Placing in position 150 mm dia Bollards 1200 mm high of required shape including providing M.S. Pipe Sleeve 75 mm dia 450 mm long in the Bollard and M.S. pipe 40mm dia and 450mm long with 150x150x6 mm M.S. plate welded at bottom and embeded 150 mm in cement concrete 1: 3: 6 (1 cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size) including dismantling of existing bollard(if required) and necessary excavation of size 450x450x450mm deep for the same in bitumen/concrete pavement at specified spacing.

Reuse of Devri

Repair of Devri Kerb

Repair of wood(in seaters) including additional members for support,nails,screws, lbour etc all complete job

Repairs of Cobble Stone including removing the loose cobble stone, removal of mortar, cleaning the cobble stone, disposal of unserviceable material to the dumping site, stacking of serviceable material & re-fixing of Cobble stone (available) in required pattern laid on 25 mm average thick cement mortar 1:3 (1 cement : 3 course sand) and jointed with grey cement slurry, complete in all respect. The rate shall include cost of all required materials, labour, plants, tools, tackles & all carriages required for the job.

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)

Second class deodar wood

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

French spirit polishing, one or more coats on old work

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class deodar wood

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Laying old cement concrete paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in- charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in- charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement :3coarse sand: 6 graded stone aggregate 20 mm nominal size)

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.

Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material upto a lead of 1 kilometer, as per direction of Engineer-in-charge.

Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge 40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.

Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications an

d directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.5% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. .

Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.

Providing and applying tack coat using hot straight run bitumen of grade – VG-30, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. 16.38.1 On W.B.M. @ 0.75 Kg/sqm. 16.38.2 On bitumen surface @ 0.50 Kg/sqm.

Dismantling wooden ballies/planks in posts and struts including stacking within 50 meters lead (all wood work) complete job

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. First Class deodar wood

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Budloo/Fir wood

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete Second class Deodar Second Class

Painting with oil type wood preservative of approved brand and manufacture on old work (one or more coats)

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead.

Repairs of Devri Tiles including taking out existing loose Devri Tiles/Devri Flooring removal of mortar, cleaning the tiles/devri, disposal of unserviceable material to the dumping site, stacking of serviceable material & re-fixing the same (available Devri tile of all sizes up to 75 mm thickness) laid on 25 mm average thick cement mortar 1:3 (1 cement : 3 course sand) and jointed with grey cement slurry at or near ground level in position to the required line, level and curvature including curing. The rate shall include cost of all materials, labour, plants, tools, tackles & all carriages required for the job.

Repairs of Brick work including taking out existing loose bricks, removal of mortar, cleaning the brick, disposal of unserviceable material to the dumping site, stacking of serviceable material & re-fixing the same (available bricks), re-fixed in cement mortar 1:6 (1 cement : 6 course sand) in position to the required line, level and curvature including curing. The rate shall include cost of all required materials, labour, plants, tools, tackles & all carriages required for the job.

Wooden planking, tongued and grooved in flooring including fixing with iron screws complete (25-40) mm thick Second class deodar wood

Repairs of following types of Railings including re-fixing the loose parts / fittings / fixtures, with available material, complete job. The rate shall include cost of all required materials, labour, plants, tools, tackles & all carriages required for the job. (Payment to be made per Sqm. of area of railing repaired)Wooden Railings (Quality of wood as per the approvel of Engineer-In-Charge)

Repairs of following types of Railings including re-fixing the loose parts / fittings / fixtures, with available material, complete job. The rate shall include cost of all required materials, labour, plants, tools, tackles & all carriages required for the job. (Payment to be made per Sqm. of area of railing repaired)Steel Railings

Repairs of wooden seating benches including re-fixing the loose parts / fittings / fixtures (available wooden parts, MS angles, tees, rectangular tubes, hollow section, flats) with screws / welding etc. complete job. The rate shall include cost of all required materials, labour, plants, tools, tackles & all carriages required for the job

Varnishing with varnish of approved brand and manufacture:Two or more coats of glue sizing with spar varnish on an under coat of flatting varnish

Steel reinforcement with Thermo-Mechanically Treated bars of grade Fe-500D or more for R.C.C. works including straightening, cutting, bending, placing in position and binding all complete for all levels. The rate shall include cost of all materials, labour, plants, tools, tackles & all carriages required for the job.

Providing and Laying Maharaji Bricks (size: 9"X4"X1.5") of class designation 7.5 at all levels including curing in lime surkhi 1:4 (1 lime : 4 surkhi) With grooves and pointing etc. complete in all respects to the satisfaction of the Engineer-in-Charge. The rate shall include cost of all materials, labour, plants, tools, tackles & all carriages required for the job.

Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality. Circular shape 560mm internal diameter

Providing and laying rough chisel dressed 25 mm thick Devri tiles of any size in cement mortar 1: 4 (1 cement : 4 coarse sand) at all levels including curing, complete as per direction of Engineer-in-Charge. The rate shall include cost of all materials, labour, plants, tools, tackles & all carriages required for the job.

Providing and fixing 20mm thick wooden planks in ceiling (frame work for base to be paid for separately) with M.S. screws complete – Budloo / Fir wood

Dismantling tile work / paver blocks of any thickness in floors laid in cement mortar including stacking serviceable material within 50 meters lead and disposal of unserviceable material to the dumping site as per directions of the Engineer-in-Charge. The rate shall include cost of all labour, tools, tackles & all carriages required for the job.

40mm thick fine dressed Red Sand Stone flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand) with joints finished flush and curing complete job in all respect, of following specifications. The rate shall include cost of all materials, labour, plants, tools, tackles & all carriages required for the job.

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications. The rate shall include cost of all materials, labour, plants, tools, tackles & all carriages required for the job. (a) Two or more coats applied @ 1.25 litre/10 sqm over and including one coat of special primer applied @ 0.75 litre /10 sqm

Providing and laying matt finished vitrified tile of specified size having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge.400x400x10 mm

(c) Painting steel work with two or more coats applied @ 0.90 litre/10 sqm over an under coat of primer applied @ 0.80 litre/10 sqm of approved brand and manufacture.

Polishing on wood work with ready mixed wax polish of approved brand and manufacture on New work

Providing and Placing in position Stainless Steel Bollard (SS 306) 125 mm dia. Bollards 1200 mm high including necessary arrangements for fixing of chain and fixed with 150x150x6 mm M.S. plate welded at bottom and embedded 150 mm in cement concrete 1: 3: 6 (1 cement : 3 coarse sand:6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing.

Providing, Laying and fixing of light class PVC pipes 150mm dia

Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.

Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required the following

Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5

Repairs of Pot holes in bituminous carriageways by way of removal of all loose and defective material by cutting the pot holes in rectangular patches and making good the same by replacement with suitable material including supply of extra quantities of material i.e. crushed aggregate, moorum screening, bajri and labour required. The rate shall include cost of all materials, labour, plants, tools, tackles & all carriages required for the job.

Rectangular manhole 120x90 cm with circularcover 560 mm dia of grade HD - 20

Circular manhole 140 cm dia with circular cover 600 mm dia of grade EHD - 35

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing of carbon Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10mm x 60 mm including all carriages upto site etc complete job.

(b) Painting wood work with two or more coats applied @ 0.90 litre/10 sqm over an under coat of primer applied @ 0.75 litre/10 sqm of approved brand and manufacture

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead: Thickness 25 mm to 50 mm (Sqm) Complete job.

Labour charges for refixing wooden planks with T&G Joint in flooring along screws etc. complete job.

Carpenter 1st class

Carpenter 2nd class

Bhisti / Mazdoor

Balck Smith First class with all necessary welding tools, generatror etc (whenever applicable)

Balck Smith Second class

Mason first class

Gardner with all necessary tools, machinery etc

Providing of materials for repairs.

Screws of all designs and sizes

Nails of various sizes (galvanised)

Wood glue

Hardware fitting like Hold fasts, tower bolts, Hinges etc

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be conside

red excluding fixing accessories such as nuts, bolts, fasteners etc.).