Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Responsive |
| 2 | Accepted-Technical | Accepted-Technical Responsive |
| 3 | Rejected-Technical | Rejected-Technical Non Respensive |
Tender Value
₹2.9 Cr
EMD Value
₹5.9 L
Closing Date
18 May 2026, 4:30 pmClosed
Office of S.E Pmgsy Circle Srinagar
Office of S.E Pmgsy Circle Srinagar, Engineering Complex Rajbagh
Refer to BOQ
2026_KSRRD_147554_1
02/SE/PMGSY/S/E-TENDERING-OF 2026-27 Dated 09-05-2026
Open Tender
CIVIL
Percentage
60 days
Kulgam
Refer to e-NIT/SBD
17 documents required · 17 mandatory
₹5,500
Accounts Officer, Pmgsy Kashmir
₹5.9 L
Office of S.E Pmgsy Circle Srinagar
22 May 2026
9 May 2026
19 May 2026
9 May 2026
18 May 2026
12 May 2026
11 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Part (A) Construction of embankment | - | - | - | - |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,
wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: | 1,710 | cum | 225.21 | ₹3,85,109.1 |
| 3 | Open timbering in trenches including strutting and shoring complete (measurements to be taken of the lace area timbered): | 70 | sqm | 128.41 | ₹8,988.6 |
| 4 | P/L of stone soling beneath concrete strip
(available at site) | 80.4 | cum | 438.4 | ₹35,247.7 |
| 5 | Providing and Laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in (1:4:8 (1 Cement:4 Coarse sand: 8 graded stone Aggregate 40mm nominal size) | 53.6 | cum | 4,561.95 | ₹2,44,520.33 |
| 6 | Providing and laying in position machine batched and machine mixed design mix grade M25 cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately.
(foundation) | 461.78 | cum | 7,032.97 | ₹32,47,648.8 |
| 7 | Providing and laying in position machine batched and machine mixed design mix grade M25 cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately.
(above plinth level upto floor v) | 798.37 | cum | 8,252.56 | ₹65,88,615.52 |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Foundation etc for concrete | 210 | sqm | 251.07 | ₹52,725.56 |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc., etc. for mass concrete. | 2,565.13 | sqm | 551.47 | ₹14,14,586.03 |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level c)Thermo-Mechanically Treated bars of grade Fe-500D or more | 92,202.14 | kg | 108.02 | ₹99,59,933.12 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 16.86 MB
sbd.pdf
Tender Documents • 1.12 MB
drawingrwall.pdf
Additional Documents • 0.78 MB
BOQ_230259.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .