REPAIR TO HARDSTANDING, COMPOUND WALL , STEEL GATES, JOINERY, STEEL COLLAPSIBLE GATES, FALSE CEILING , ROOF SHEETS, GLASS PANES AND OTHER MAINTENANCE WORKS IN DAD COLONY SECTOR 35-B AND PCDA BUILDING SECTOR 09 UNDER GE CHANDIGARH

Amount

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.

Taking down and re-fixing of shutter in same opening of any description size but exc 1 sqm and n.exc 2 complete all as specified and directed.

Taking down and re-fixing of shutter in same opening of any description size exc 2 Sqm but not exc 4 Sqm complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutter from frame) not exc 1.5 Sqm each with mongry complete all as specified and as directed

Taking down chowkhats with shutters (without taking off shutter from frame)exc 1.5 Sqm but exc 4 sqm each with mongry complete all as specified and as directed

Taking down steel window/ventilator with shutters (without taking off shutter from frame) not exc 1.5 Sqm each complete all as specified and as directed

Taking down steel or window/ventilator with shutters (without taking off shutter from frame) exc 1.5 Sqm but not exc 4 sqm each with mongry complete all as specified and as directed

Petty Repair only to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after welding making serviceable all as specified

Petty repair only to existing steel door /steel mumty door by welding hinges or removing the steel door shutters from the frame and re-fixing after ,welding making serviceable all as specified

Demolition of brick work built in cement mortar incl all corners/arches pillar etc cleaning and stacking of serviceable bricks for reuse and removal of unserviceable material complete all as specified and directed.

Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified and directed.

Brick work with sub class 'B' bricks (EXCEPT BRICKS), straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified and directed.

Taking down cement plaster from wall's/ceiling including raking out joints hacking for key scrubbing down with water and dispose off debries out side MoD land complete all as specified and directed

M&L for 15mm thick cement plaster in CM 1:4 over concrete/brick surfaces and finishing the surface even and smooth (without using extra cement) etc. complete all as specified and directed.

M&L for 15mm thick cement plaster in CM (1:6) on faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. complete all as specified and directed.

M&L for 10 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc complete all as specified and directed.

Material and Labour for preparation of new plastered /concrete /unplastered surfaces and applying two coats of oil bound distemper over and including coat of primer of chalk whitening on walls complete all as specified and directed.

All as per item No 17 here-in-before but on ceilings.

Material and Labour for preparation of new plastered /concrete /unplastered surfaces and applying two coats of weather guard exterior acrylic emulsion paint (Ist quality) any tint, at over coat of primer on walls complete all as specified and directed.

M&L for preparation of old decorated brick/concrete/ plastered or unplastered surfaces by brooming or by steel wire brushing, scrapping down snow soot,moulds, moss and efflorescent salts and treading oil and greasy spots, of walls including corinces pillars etc filling the all holes / patches with wall care putty to make surface smooth wherever required and applying two coats of oil bound distemper , at any height (Upto 6th floor) all as specified and directed.

M&L for preparation of old decorated brick/concrete/ plastered or unplastered surfaces by brooming or by steel wire brushing, scrapping down snow soot,moulds, moss and efflorescent salts and treading oil and greasy spots, of walls including corinces pillars etc filling the all holes / patches with wall care putty to make surface smooth wherever required and applying one coat of oil bound distemper , at any height (Upto 6th floor) all as specified and directed.

All as per item No 21 above but on ceilings.

M&L for preparing old plastered or unplastered surfaces of wall by washing rubbing down and stopping of painted surfaces of any description filling the all holes / patches with wall care putty to make surface smooth wherever required and applying one coats of weather guard exterior acrylic emulsion paint (Ist quality) (Apex) any tint at any height (Upto 6th floor) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing of debris out side MoD land complete all as specified and directed

M&L 25 mm thick Plain cement concrete 1:2:4 Type B1 (20mm graded aggregate) as in flooring, surfaces finished even and fair complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed

M&L for 75 mm thick cement concrete type C2 1:4:8 (40mm graded aggregate) as in flooring sub base complete all as specified and directed.

M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and as directed.

S&F 38 mm Plastic dividing strips, 1.5mm thick and inserted in position to confirm the design complete all as specified.

Providing, cement concrete PCC 1:2:4 type B-1 (using 20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs stone, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

S & F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, and fixing in the frame at site as per specification and drawings.

Supply and fix 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 35mm thick glazed and Skelton shutter of IInd class hard wood ( except mango ) open rebated and prepared to receive glass, gauge etc (with out shash bars) divided into square plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part-I (2009) section 8-24(a) and fitted to chowkhat complete all as specified.

Supply and fix 30mm thick flush shutters, solid core construction, with block board core and plywood face one face is covered with decorative face veneer with lippling/frame to match including cupboard partitions/shelves etc complete all as specified and directed.

S&F Factory made single oxtruded WPC (Wood polymer composite) solid decorativ type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (suspension grade ), calcium carbonate and natueral fibers (wood power/rice husk/wheat) and non toxic additives (maximum toxicity index of 12 for 100grms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900N (Edge), minimum compressive strength 50N/mm2 modulus of flame of class A category with property of being termite/borer proof, water/mosisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both face of required size with nessary full body threaded star headed counter sunk S.S screws, all as per direction of Engr-in-charge.

S&F as in repair framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-277R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh including one shop coat of red oxide/ zinc chrome primer, including 04 nos cutting holes into or through brick walls in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:3 type B-1 complete all as specified.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per drawing No TD-276R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh including one shop coat of red oxide/zinc chrome primer, including 04 nos Cutting holes into or through brick walls in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:3 type B-1 complete all as specified.

S & F Collapsible steel gates, top hung consisting of channel pickets, pivoted flat bars for top and bottom track runners 50x50x6 mm , roller wheel 65 mm dia,02 nos end channels fixed in wall,vertical channel 20x6 mm ,06 nos crossing or lacing 500mm hight of lacing, spacers riveted hight 150 mm ,02 nos locking key , 02 steel handles etc., as specified, erected in position and securing runners with hold fasts and brackets, complete all including taking out old collapsible steel gates complet all as specified and directed.

Taking down and re-fixing Collapsible steel gates not exc 6 sqm after repair of gate change of necessary part/ items in gate ,like top hung consisting of channel pickets, flat bars for top and bottom track runners 50x50x6 mm , roller wheel 65 mm , end channels fixed in wall,vertical channel 20x6 mm , , locking key , steel handles etc., as specified, erected in position and securing runners with hold fasts, brackets and other repair for smooth functioning, complet all as specified and directed.

S&F in repair Steel rolling shutters of 1.25 mm thickness laths without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push & pull or manual type including taking out old Steel rolling shutters complete all as specified and directed.

S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S&F Ball bearing for rolling shutter complete all as specified and directed.

S&F Stainless steel wire cloth.0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed withstainless steel wire staples complete all as specified and directed.

S&F in repair Stainless steel wire cloth.0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed withstainless steel wire staples complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handle fabricated type anodized complete all as specified and as directed.

S&F 150 mm long aluminium anodised extruded section tower bolts with plate, staple & bolt and fixed to shutter complete all as specified and as directed.

S&F 300mm Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and complete all as specified and as directed.

S&F 140 mm Floor Door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring, fixed complete all as specified and directed.

S&F M.S.helical spring 300mm longe including roller & roller plate complete all as specified and directed.

S&F for butt hinges, medium weight, cold rolled of stainless steel of size 100 mm.

S&F in repair door closer (Aluminium die cast body) hydraulically regulated,designation No. 2,universal type, suitablefor door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane all broken glass removed out off MoD land,complete.all as specified and as directed.

S&F Factory made single oxtruded WPC (Wood polymer composite) solid decorativ type flush door shutter of size 18mm thick comprising of virgin polymer of K value 58-60 (suspension grade ), calcium carbonate and natueral fibers (wood power/rice husk/wheat) and non toxic additives (maximum toxicity index of 12 for 100grms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900N (Edge), minimum compressive strength 50N/mm2 modulus of flame of class A category with property of being termite/borer proof, water/mosisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both face of required size with nessary full body threaded star headed counter sunk S.S screws, all as per direction of Engr-in-charge.

M&L powder coated american aluminium handle 200mm long for aluminium door omplete all as specified and directed.

M&L 0.80 mm thick PVC edge binding tape arouond the 18 -20 mm thich PVC shetter edge, complete all as specified and directed.

S&F in repair 30 mm width of flaps Continuous (piano) hinges,steel, bright finish or electrogalvanised fixed to door complete all as specified and directed

S&F in repair 100 mm Brass handles, cast type, polished bright finish handle for cabinet shutter

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, bright finished complete all as specified and directed

S&F in repair 100 mm Hasp and staple, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F in repair 50 mm long magnatic catcher of brassalloy body superior quality and fixed with screw complete all as specified

S&F in repair stainless steel plain basket, cutlery pan basket ,grain trolly, plate basket,cup soucer,partition, or any other basket of any description/pattern as approved by GE fixed with sliding channel revolving wheels , fixed to wood based frame work , complete all as specified and directed

S&F in repair stainless steel auto close (dadu) hinges suitable for PVC moulded shutter fixed in position with staianless steel screw complete all as specified and directed

S&F in repair telescopic channel/slider to fiacilitate drawer slide on stleel ball bearing 400-500 mm long and fixed in position with stainless steel screws , ISI marked , suitable for cupboard drawers , complete all as specified and directed .

Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings, complete all as specified

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

S&F Steel tubular section of any size and shape including special shaped washer fixing in any position ,gate ,fram, etc.complete using ERW or induction butt welded tubes conforming to required IS grade St.-240 complete all as specified.

S&F MS Framed work as in doors or gates and other required of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (including) of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with Fe 290 (Gde-E-165) complete all as specified.

S&F Powder coated 4 mm thick Mild Steel Box (45cmx30cmx20cm) for water meter with openable shutter, holes for GI Tubing and locking arrangements including taking down of old meter box and making good the dirturbed portion with cement mortar 1:4 complete all as specified and directed

M&L for preparation of new wooden surface, of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint ( Ist quality) over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for PVC hollow wall panelling 7 to 8mm thick any colour/design approved by engr-in-charge, inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves and screws as required at site including Dismantling of walls and ceiling boards/wall paneling or insulation board any thickness, including cover fillets complete all as specified and directed.

Demolition of stone slabs and tiles/paver blocks of any description or thickness in floors,aprons etc laid ,bedded and pointed in any mortar.

M&L for 16-18 mm thick Machine cut kota stone slab flooring size 55cmX55cm over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick screed bed in CM 1:6 complete all as specified.

M&L for 16-18 mm thick Machine cut kota stone slab as in riser of steps, skirting, dado and pillar laid over 10mm thick rendering in CM 1:4. cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing including complete all as specified.

M&L for Green Marble work 16 to 18 mm thick (table rubbed and Pre polished) in steps (Treads/Riser/Skirting), jambs, pillars, window cills, cooking platforms and like over 15mm thick screed bed/back coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including Bull nose Rounding to edges of stone slabs, such as in steps, cooking platform, and other similar works complete all as specified

M&L for 16-18 mm thick granite machine cut stone slab (table rubbed polished) as in cooking platform , jamb, cill, step , riser, counter basin oval shape & tble top setted and jointed with cement slurry and bedded over & including 15mm thick bedding layer of cement sand mortar (1:4), & pointed with white/ coloured cement including grinding, rounded and chamfered edges and granite polishing etc complete all as specified and as directed.

M&L Machine Pressed Precast concrete Interlocking paver Block with grey cement and pigment any Shape and Size confirming to IS-15658-2006 of 60mm thick M-35 grade on 20 mm thick sand cushion and filling of joints with dry cement and sand mortar 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L out door/parking tiles heavy duty for light traffic Non skid,anti scratch,heavy grip ,vitreous/semi vitreous coloured ,unique designs tiles 8 to 10 mm thick area of each tile of size 300 mm x 300 mm, in floors parking/outdoortiles etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick square/ rectangular) area of each tile of size 300 mm x 300 mm mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for Glazed ceramic coloured /printed tiles of size 450mmx 300mmx7mm thick as in skirting/dado setting & jointed with neat cement slurry over & including 10mm thick rendering of cement sand mortar (1:4) and pointed with coloured cement to match with surface of tiles complete all as specified and as directed.

M&L for coloured vitrified tiles 8 mm to 9 mm thick (square ,rectangular) area of each tile exceeding 0.18sqm but not exc 0.36 Sqm laid as in floors, set and jointed with cement slurry over & including 15mm thick bedding of layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed.

M&L machine pressed factory made chequered tiles of required size, shape & colour 22 to 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry with grey cement and pigment complete all as specified and directed.

Taking down to 15mm bore steel tubing and connections removal from site complete all as specfied and as directed.

S & F 15mm bore steel water tubing medium grade, galvanized with all fittings and fixture fixed & concealed in wall/ceiling or laid in floors complete all as specified and as directed.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F for tubes 20 mm, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including in short lengths standard clamps and screws fixed on rawal plugs Complete.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on Brick wall complete all as specified

S&F in repairs drapery rods/curtain rods Stainless steel pipe (fancy type) 22 to 25 mm in dia with end SS brackets & knobs ,funnels fixed with rawl plug and screws, complete all as specified and as directed.

Supplying and fixing in existing position the new vitreous chinaware wash down water closet (padestal pattern) light colour/white With plastic seat cover including P’ or ‘S’ trap, plastic seat cover white and connection to out going pipe & to flushing pipe, anti-syphonage pipe etc as directed by Engr-in-Charge including taking out of old EWC complete all as specified and directed

S&F in repairs Vitreous China Squatting pan 'orissa pattern size 580x440 white with integral foot rests with `P' or `S' trap, front or back inlet(excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including cement concrete complete including making good to floor.

S&F in repairs vitreous china wash down water closet pan including connection to drain or out going pipes single piece complete all as specified and directed. Make: Jaquar (Cat Part No.SLS-WHT-6851S300PP), Cera (Cat Part No.A-1014108),Hindware (Cat Part No.92562-S-22) or equivalent

S&F in repairs Vitreous China wash Basin (flat back or angle back type) , of size 550x400mm including brackets, waste coupling PTMT, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified.

S &F for vitreous china white wash basin with pedestal type flat back of size 550mmx400mm coloured including MS brackets, cutting for and pinning in ends of brackets, including PVC waste pipe as in repairs complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as spd and directed by Engr-in-charge.

S&F in repair Health Faucet hand shower with 8mm dia 1mtr long flexible tube wall hook complete all as specified and directed. CAT No ALD-CHR-573 of Jaquar or equivalent of Hindware, Cera, Somany

S&F spray jet chromium plated including suitable lengthof PVC connection pipe , fixed in repair complete all as specified and as directed.

S&F for stop valve (concealed type) cast copper alloy fancy type chromium plated with long shank and cup screwed down, and fixed with 15mm bore iron pipe as in repair complete all as specified and as directed.

S&F in repair single lever centre hole basin mixer without popup waste system wround spout with 375 mm long braided hoses complete all as specified and directed. make:CAT FLR 5167B of of Jaquar or equivalent of Hindware, Cera, Somany

S&F Wall Mixer 3‐In‐1 System With Provision for Both Hand Shower and Overhead Shower Complete With 115Mm Long Bend Pipe, Connecting Legs & Wall Flange (Without Hand Shower & Overhead Shower) complete all as specified and directed. Make : Jaquar (Cat part No FLR-5267N) or equivalent of Hindware, Cera, Somany

S&F in repair, overhead shower 150mm x 150mm square shape single flow (ABS body chrome plated with gray face plate ) incl shower arm 190mm long with rubit cleaning system complete all as spd and directed. CAT No OHS-CHR-35495 + SHA-483 of Jaquar or equivalent of Hindware, Cera, Somany

S & F in repairs cast copper alloy chromium plated towel rack with lower hanger (Stainless steel) with hooks complete all as specified and directed. Make : Jaquar (Cat part No AHS-1581H) or equivalent of Hindware, Cera

S&F Towel Ring chromium plated complete all as spd and directed. CAT NO ACN - 1121N of Jaquar or equivalent of Hindware, Cera, Somany complete all as spd and directed.

S & F in repairs toilet papper holder chromium plated with fixing to wall complete all as specified and directed. Make : Jaquar (Cat part No 1151N).or equivalent of Hindware, Cera, Somany

S&F Soap Dish Holder chromium plated complete all as spd and directed. CAT NO ACN - 1131N of Jaquar or equivalent of Hindware, Cera, Somany complete all as spd and directed.

S&F Soap Dispenser with metallic bolt complete all as spd and directed. CAT NO CAN - 1137N of Jaquar or equivalent of Hindware, Cera, Somany complete all as spd and directed.

S&F tumberl holder complete all as spd and directed. CAT NO CAN-CHR-1141N oof Jaquar or equivalent of Hindware, Cera, Somany complete all as spd and directed.

S&F 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15 mm bore iron pipe as in repair complete all as specified and as directed.

S&F for 15mm bore bib taps, cast copper alloy with CP long body, fancy type, screwed down, screwed for iron pipes or for brass ferrule and fixed in repair complete all as specified and as directed.

S & F in repairs 15 mm dia bore bib taps cast copper alloy chromium plated, brass ferrule, quarter turn complete all as specified and directed. Make : Jaquar (Cat part No FLR-5047N) or equivalent of Hindware, Cera, Somany

S&F for Angle valve/stop valve cast copper alloy chromium plated, with crutch or butter fly handle screwed down, and fixed with 15mm bore iron pipe as in repair complete all as specified and as directed.

S&F in repairs 15 mm dia bore stop/angle valve with high pressure, screwed both ends for iron pipes or for union complete all as specified and directed. Make : Jaquar (Cat part No FLR-5053N) or equivalent of Hindware, Cera, Somany .

S&F 10 litre capacity PVC Valveless syphonic actiontype flushing cistern low level white with inlet ball valve float and handle incl bracket as fixed in repair complete all as specified and as directed.

Dismantling of cast iron pipe / reinforced concrete/PVC drain pipes/PVC (SWR) pipe etc, 100/75/50mm, jointed in cement mortar and taking out of trenches and wall, if required complete all as specified and directed.

S&F for 110mm dia PVC (SWR) pipes single socketed pressure rating not less than 4 Kg/SQ Cm, ISI Marked with rubber ring joints, laid in trenches /fixed to wall/floor complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed,pressure rating not less than 4 Kg/SQ Cm, ISI Marked in any length with rubber ring joints, laid in trenches /fixed to wall/floor complete all as specified and directed.

S&F for floor frap 75 mm PVC as in repair, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm PVC (SWR) ISI Mark bends any radius complete all as specified and directed

S&F 75 mm PVC (SWR) ISI Mark bends any radius complete all as specified and directed

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 5 mm thick sheet glass pane tinted/plain/Figured glass type, with 5 micron thick black film ordinary quality and ruber, cleting, silicone,glazing with oil putty etc in each pane complete all as specified and directed.

S&F aluminium powder coated (min thickness of powder coating 50 micron) frame for door , windows, ventilators and weight of aluminium section not les than 0.55 kg/Rm with one or more rebates including joining cleat/aluminium beading for fixing etc complete all as specified.

S&F aluminium powder coated (min thickness of powder coating 50 micron) work for aluminium door shutters, weight of aluminium section not les than 0.55 kg/Rm aluminium section including necessary joining cleats/aluminium beading, glazing clips clips, ruber neoprene gasket packing in each complete all as specified

S&F aluminium powder coated (min thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars,including (double shutter) glazing bars and without glazing bars weight of aluminium section not les than 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) complete all as specified

S&F Stainless steel work such as Frames , grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred doors;ladders; framed balusters; walk ways; railingswork on forming to grade 304 complete all as specified and directed.

S&F in repair for providing precast conc. Jallies 35mm thick any sizes and any design type B-O 1:3:6 using 12.5mm graded stone agg and set in cement mortar 1:4(sizes and design required at site) complete all as specified and directed

S&F in repairs Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any of standard rails straining bolts including, securing or tying at crossings with and provision of galvanised mild steel wire stap-les or steel pins incl dismantling of old existing barbed wire in any position complete all as spd and directed.

S&F PVC HDPE tree guard hexagonal plastic green wire mesh reverse twist for fencing any size and shape wire diameter 2.0 mm to 4.0 mm (Approved by GE) including line wires, any mesh, size and type to any of standards , rails , staining bolts, etc including provision of bindings wire complete all as specified and directed.

S&F powder coated american aluminium tower bolt 200mm long complete all as specified and as directed.

S&F powder coated aluminium tower bolt 100mm long complete all as specified and as directed.

S&F powder coated aluminium handle 125mm long for aluminium door complete all as specified and as directed.

DHIMAN AND SONS (BID ID -3119573)

OJHA ENTERPRISES (BID ID -3118498)