Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.3 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING LOWEST BIDDER | |
| 2 | L2₹9.4 L+₹1.0 L (12.3%)Rejected-Finance | L2 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER |
Tender Value
₹12.3 L
EMD Value
₹24,580
Closing Date
2 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE KHADKI
Headquarters CWE Khadki, Military Engineer Services, Range Hills Road, Khadki, Pune-411003
PROVN OF SENTRY POST AND TOILET BLOCK AT GATE NO 2 OF TRG BN-I AND PROVN OF PARADE CONTROLLER AND COMMUNICATOR CABIN AT BEG AND CENTRE IN PARADE GROUND UNDER GE CENTRAL KHADKI.
2023_MES_630709_1
CWE/KKE/TOKEN-62 OF 2023-24
Open Tender
Civil Works
Item Rate
120 days
BEG AND CENTRE area
AS PER TENDER
6 documents required · 6 mandatory
₹500
GE CENTRAL KHADKI
₹24,580
Yes
27 Feb 2024
1 Dec 2023
8 Jan 2024
1 Dec 2023
2 Jan 2024
18 Dec 2023
2 Dec 2023 - 9 Dec 2023
Amount
Surface excavation n.exc 30 cm deep and avg 15 cm deep and getting out of any type of soil complete all as specified and as directed by the Engineer-in-Charge.
Excavation in trenches nexc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/loose soil for laying cables, erection of poles complete all as specified and directed by Engr-in-Charge
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth, for foundation, laying of pipes, cables,erection of poles,laying cables etc or for shafts, wells, cessfills, manhole etc 10 Sqm on plan and getting out in hard / dense soil complete all as specified and directed by Engr-in-Charge.
Returning, filling in, including spreading, levelling, waterting and wall ramming in layers not exc 25cm complete all as specified and as directed by the Engineer-in-Charge.
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.
M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M & L for plain cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in foundation, filling & mass concrete complete all as specified and directed.
M&L mild steel TMT bars10mm dia and over, cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
All as per item No 8 above but 5mm dia and over upto and including 10mm dia in stirupps, spacers and binders.
M&L for formwork to sides of concrete foundations, bases of columns, sides and soffits (if any) of foundation and plinth beams, and similar work complete all as specified and as directed.
M&L for formwork to sides of piler post, struts, and columns and similar works complete all as specified.
M&L for formwork to sides of soffits of lintel / lintel band for flat and rough finished surface of concrete.
M&L for formwork to soffits of suspended slab, such as roof slab, for surface of concfrete.
M & L for RCC Design mix M-25 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, coping beam, band etc; basement slabs, under-reamed piles and mass concrete and finishing complete all as specified and as directed.
M&L for RCC M-25 using 20mm graded stone aggregate, design mix in columns. Pillers, piers post and struts complete all as specified and directed.
M&L for RCC M-25 using 20mm graded stone aggregate, design mix in roof slabs, supported on walls, beams and columns complete all as specified and directed.
M & L for pre cast cement concrete block masonry using type C1, (1:3:6), using 20 mm graded stone aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed.
M&L for rendering 5mm thick in CM 1:3 to fair faces of concrete surfaces in ceiling of roof slab and chajjas finished even & fair.
M & L for rendering 15 mm thick on fair faces of brick wall/PCC block masonry wall in CM(1:4) mixed with and including integral liquid water proofing compound finished even and smooth without using extra cement complete all as specified and as directed.
M & L for rendering 10 mm thick on fair faces of brick wall / PCC block masonry wall in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered surfaces of ceiling and applying three coat white wash.
M&L for preparation of new plastered surfaces of wall and applying two coat of oild bound distemper over a coat of alkali resistant primer all as specified and directed.
M & L for preparation of newly plastered surface and applying two coats of cement based paint over a coat of primer on wall etc complete all as specified and directed
M & L for hard core of broken stone aggregates of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L 75mm thick Plain Cement concrete (1:3:6) Type C-2 (using 20mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement and providing necessary joints where necessary complete all as as specified and as directed by Engr-in-Charge.
M & L for 100 mm thick plain cement concrete (1:3:6), type D2, using 20 mm graded stone aggregate under floors, as in sub base of floors complete all as specified and as directed.
M & L for 25 mm thick PCC 1:2:4 type B-1 using 20mm crushed stone aggregate as in leveling course complete.
M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded coarse aggregate in flooring complete all as specified and directed
M&L Non-Skid glazed ceramic Coloured Tiles 7 to 8mm thick(squre/rectanglar) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in Floors Set and Jointed in Neat Cement Slurry and Pointed in Colour Cement to match, complete all as specified and as directed.
M&L for Glazed ceramic colour tiles in vertical surface of wall size 450x350x7mm thick with necessary border etc set and jointed neat cement slurry and pointed in coloured cement to match over including 10mm thick rendering backcoating in cement mortar 1:4 all as specified and directed.
M&L for machine cut mirror polish kota stone slab as in flooring and Stpes of the staircases 20-22mm thick over 15 MM thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners , rubbing and mirror polishing complete as specified and as directed.
S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR part-II.
S&F mild steel butt hinges, 100mm long, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11.
S&F mild steel butt hinges, 100mm long, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11.
S&F aluminium anodised 100mm long barrel tower bolts of extruded sections.
S&F brass tower bolt 150mm long with barrel of exgtruded section and rolled or cast bolts complete all as specified.
S & F aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and directed.
S & F Aluminium handles 150 mm , fabricated type, anodised , fixed with screws , complete all as specified.
S&F extruded brass handles 150mm long fabricated type.
S&F Mortice lock vertical type, size 100 mm aluminium 4 lever
S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
S&F aluminium louvered ventilators of section size 80mmx20mmx1.50mm includig 5mm thick forsted glass fixed in half portion & adjustable type lovers in another half and stainless steel wire mesh fixed type on outside frame etc complete all as directed.
S&F tubes medium grades galvanized 15mm bore with all fittings and fixed complete to walls and ceiling or laid in floors.
S&F tubes medium grades galvanized 20mm bore with all fittings and fixed complete to walls and ceiling or laid in floors.
S & F and laying in trenches/fixed to wall galvanised steel water tubing 25 mm bore, medium grade with and including all medium grade fitting complete all as specified and directed.
S & F and laying in trenches/fixed to wall galvanised steel water tubing 40 mm bore, light grade with and including all medium grade fitting complete all as specified and directed.
S & F and laying in trenches/fixed to wall galvanised steel water tubing 50 mm bore, medium grade with and including all medium grade fitting complete all as specified and directed.
S & F gun metal gate valve with iron wheel head, screwed both ends for iron pipes 50 mm bore complete all as specified and directed.
S & F gun metal gate valve with iron wheel head, screwed both ends for iron pipes 25 mm bore complete all as specified and directed.
M&L for cutting and welding of exisiting CI/GI pipe in trenches for fixing/inserting of valve, bends,double socket, Tee pieces, single branch, Y junction etc , of 80/150 mm size of pipe complete by using necessary cutting material such as gas cutter etc. all as directed by Engr-in-Charge.
S&F bib taps fancy type chromium plated 15mm bore, cast copper alloy with crutch handle, screwed down, screwed for iron pipe all as specified and directed.
S&F pillar taps fancy type, chromium plated 15mm bore, cast copper alloy with capston heads, chromium plated, screwed down for iron pipe complete all as specified and directed.
S&F stop valves, 15mm bore fancy type, chromium plated with long shank and cup concealed type, cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for iron pipes or for unions all as specified and directed.
M&L for providing 25mm (consolidagted thicknes) sand cushioning layer including compacting, watering etc for laying interlocking paver blocks of any description complete all as specified and directed.
M&L for 60mm thick machine pressed precast machine pressed interlocking paver blocks any shape and size confirming to IS-15658-2006, with using grey cement and pigments laid on sand cushion layer, using M-35 grade concrete complete all as specified and directed.
M&L for providing plain cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregates) as in cills, steps, plinth and string courses, copings, benching, haunchings etc and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
M&L for Black Marble Work 18 to 20 mm thick (table rubbed and polished ) as in steps , jambs, pillars, window- cills, , and like over 15mm thick cement screed base in CM (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with shade of slab rubbing , polishing and rounding to edges complete all as specified and directed.
S& F Anodised aluminium powder coated frame for doors ,windows,ventilators aluminium partition with one or more rebate including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. complete all as specified and directed complete all as specified and as directed.
S& F Anodised aluminium door shutters powder coated aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos each door ,hinges,anodised aluminum snap beading screws etc. complete all as specified and directed including dismantling of existing aluminium shutter frame complete all as specified and as directed.
S & F 4 mm th Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane
S&F 12 mmprelaminated particle board exterior grade both side laminated
S&F for Roof trusses (framed), trussed, rafter,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe- 290 (Gde E-165)
M&L for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying Two coats of synthetic enamel paint over one coat of red oxide primere complete all as specified.
S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.
S&F for pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.
E/M PORTION M & L for concealed point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC conduit of medium grade of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one fan point or one call bell point controlled by one, one way switch including 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer with MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc all as specified and directed.
All as per item No 66 above but 5 amps socket point independent all as specified and directed.
All as per item No 66 above but 5 amps socket point on same board as specified and directed.
All as per item No 66 above but cable of size 2.5 sqmm for one 16 amps socket (Power) point independent all as specified and directed.
S&F 5 Amp switch piano type single pole one way incl dismentling taking down unsv one all as specified and as directed.
S&F socket flush type 6 amps, 5 pin, 230v all as specified and as directed.
S&F switch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v one all as specified and as directed.
S&F lamp Holder insulated body with back plate for batten fitting one all as specified and as directed.
S&F ceiling rose surface Bakelite three terminal one all as specified and as directed.
S & F for switch 6 amps flush type one way single pole all as specified and as directed
S&F LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) Make- CG cat part No LED12WDFWB or equivalent to Wipro/ Bajaj
S&F MCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve all as specified and directed. MAKE- Cat Part No- 4085-87 to 4085-95 of Legrand or equivalent of Schneider/ABB.
S&F MCB, SPN 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve all as specified and directed.
S&F MCB, Double Pole, 6 to 32 amps, 415 Volts, 10 KA breaking cap, ‘’C” curve all as specified and directed. MAKE- Cat Part No- 4086-28 to 4086-36 of Legrand or equivalent of Schneider/ABB
S&F MCB distribution board,Double door, metal enclosure, SPN, 230 Volts, 4 way all as specified and directed. MAKE- Cat Part No- 5076 10 of Legrand or equivalent of Schneider/ABB
S&F LED building security light 25 watt, 230V with lens and toughen glass top complete PF > 0.95 with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20/25 mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener all as specified and directed. Make-Bajaj Cat Part No ENXTP 25L WH PO PC SD or equivalent in CG/Wipro/Havells
S&F LED batten fitting, 20 watt, CDL, 230 Volts, 4 feet long , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos all as specified and directed. Make-CG, Cat Part No CCS-100-20-65-HL2-DP-NWH or equivalemt in Bajaj/Havells/Philips
S&F LED batten fitting ' 2'long, 10 watt,CDL 230 Volts , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable with mounting casing box 2 nos all as specified and directed. Make-CG Cat Part No- CCS-103-10-65-HL2-DP-NWH or equivalemt in Bajaj/Philips/Havells
S&F for Exhaust fan 200 mm in sweep (Steel body) 230/240 volt AC complete with all acessories including making connection by using flexible wire of size 0.50 sqmm 3 core and making holes, grouting nut bolts in wall for exhaust fan complete all as directed.
S&L for LT UG cable 2 core 6 sqmm XLPE insulated armoured 1100 Volts grade heavy duty cable with PVC insulated stranded aluminium conductor laid in trenches incl indoor and outdoor joint all as specified and directed.
S &L for LT UG cable 2 core 10 sqmm XLPE insulated armoured 1100 Volts grade heavy duty cable with PVC insulated stranded aluminium conductor laid in trenches incl indoor and outdoor joint all as specified and directed.
Supply only HDPE Double wall corrugated pipe (DWC) confirming to IS-14930 (Part-II) of size 50/38mm including snap fit coupler as required for cable protection.
S&F for HDPE Double wall corrugated pipe (DWC) confirming to IS-14930 (Part-II) of size 50/38mm including snap fit coupler as required for cable protection.
S&F LED batten fitting, 20 watt , CDL, 230 volts, 4 feet long complete with all accdessories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 Nos all as specified and directed. Make-HPL,cat part No HLPT51820PCGCW or equivalent in Bajaj/Philips/CG/Havells
S&F LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) CFL. Make- CG cat part No LED12WDFWB or equivalent to Wipro/ Bajaj
S&F Wall mounted fan with single string of sweep 400 mm all as per direction by engineer incharge .
M & L for Earthing complete with galvanised steel earth plate electrode 60cm*60cm*6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level ,connected to galvanised earth lead wire 4.0mm dia by means of bolts ,nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.
Aishwarya Constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .