GENP-35/2021-22 MAINTENANCE AND REPAIR TO CIVIL WORKS IN SMQS AT OLD PINTO PARK AF STN PALAM UNDER GE (AF) PALAM, DELHI CANTT-10

Amount

M&L for preparing old plastered or unplastered surfaces on walls including brooming down or steel wire brushing, scraping down smoke, soots etc and applying one coat of white wash complete all as specified and directed

All as per item No. 1 above but on ceilings.

M&L for preparing old plastered or unplastered surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coast of white wash complete all as specified and directed

All as per item No.3 above but on ceilings.

M&L for preparing old plastered or unplastered surfaces on walls including brooming down or steel wire brushing, scraping down smoke, soots etc and applying one coat of distemper oil emulsion white or tinted complete all as specified and directed

M&L for complete removal of existing treatment including preparing surfaces on walls and applying two coats of distemper oil emulsion white or tinted over a coat of primer over 2mm thick wall care putty finishing surfaces of walls even and smooth complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel and iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down chowkhat or frame with shutters (without taking off shutters from the frames) n exc. 1.5 sqm each .

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete.

S&F factory made PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing.

S&f for factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

S&F for butt hinges, stainless steel, ISI Marked 100mm size complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 150 mm long complete all as specified.

S&F for extruded aluminium alloy handles, fabricated type, 100 mm size complete all as specified.

S&F in repairs for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

M&L in repair rubber beading of 50mmx15mm size for fixing as in door cills and similar situation including necessary drilling/cutting etc complete all as specified and as directed..

S&F in repair 20mm dia fancy type PVC coated best quality drapery rods for curtains fixed to walls with brackets & end knobs as required complete all as specified

Hacking out old broken glass (any thickness size, quality or description) from wooden or steel or aluminium frames glazed with putty or fixed with wooden/Aluminium beads complete all as specified and directed

S&F for 3mm thick plain sheet glass and glazing, with oil putty or wooden beads in square not exceeding 0.50 Sqm in each pane.

All as per item No.20 above but 4mm thick.

S&F for 3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane.

Demolition of stone slab and tiles of any description or thickness in foor, aprons etc complete all as specified and as directed.

S&F for 16 to 18mm thick marble slabs (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble laid over 15mm thick screed bed in CM 1:4.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and directed.

M&L for joint free anti skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile exceeding 0.11sqm but n.exc. 0.18sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces laid over & including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

All as per item No.26 above but in skirtings laid over 10mm thick plaster in CM 1:4.

M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n.exc. 0.11sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces laid over & including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for joint free coloured glazed ceramic tiles in vertical surfaces 300x200x7mm/ 450x300x7mm thick set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified

M&L for 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceilings including finishing even and smooth without using extra cement complete all as specified.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6 on walls including finishing even and smooth without using extra cement complete all as specified.

M&L for preparing plastered or unplastered new surfaces on ceilings and applying three coats of white wash complete.

M&L for preparing plastered or unplastered new surfaces on walls and applying two coats of distemper oil emulsion over one coat of alkalic resistent primer complete all as specified .

Dismantling water tanks exc 250 & n exc 500 litres capacity .

S&F for 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), Three layers,hoisted and fixed in position complete all as specified.

S&F in repair ball brass valves, 20 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed.

S&F in reparis for bib taps 15mm bore, cast copper alloy with crutch or butte fly handle, chromium plated, fancy type, screwed down, screws for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs for stop valves, 15mm bore, chromium plated, fancy type, screwed down, high pressure with cruth or butterfly handle, screwd both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated shower roses 125mm with or without swivel joints including fixing to steel pipe or union 15 mm bore all as specified.

S&F in repair PVC flushing cistern of 10 ltrs capacity valveless, syphonic action type, low level, white with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore and connection to pipes etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC waste pipe 32mm dia, suitable for couplings 32mm & 40mm dia and 600mm long complete all as specified and directed

M&L for cleaning and removing all scale and dirt etc from tanks and from mouth of ciculating pipes etc capacity of tank exc 250 and n.exc 500 ltrs capacity complete all as specified and directed.

H.B. Traders

SHEELSONS ENTERPRISES

Baljeet Builders & Interior Decorators

A N BUILDERS

Commercial Traders

a.k constructions