Carrying out works at 33/11 kv Substation Sector-25, Indira Nagar, for making it as Adarsh Upkendra (Ideal Sub-station) under the jurisdiction of EE, EUDD-INDIRA NAGAR, LESA Trans Gomti, Lucknow Against E-Tender No 01/2020-21

Amount

Work of GASKET REPLACEMENT AND CENTRIFUGING OF TRANSFOMER OIL WORK AND OTHER ASSOCIATED WORKS of 10 MVA T/F No-2 at 33/11kV S/S Sector-25.

Opening of Jumpers form 10MVA T/F, replacement of Damage lead and again lugging each jumpers for LV & HV Side connecting, bolting and tightening of jumper with new “L” pieces and proper clamping of cables. (All clamps, nuts and bolts and "L" pieces etc. shall be provided by the contractor.)

Opening of L.V. side and HV bushing connection of 10MVA T/F No-2 and replacement of damaged bushing. Drain out transformer oil from main tank to empty oil tank.

Replacement of Gaskets of HV, LV, Neutral side bushing, radiators air releasing plug, OTI, WTI, MOG with new gaskets, their fixing after proper cleaning. (There should be no leakage of oil after replacement.)

Replacement of gaskets of Main Top Cover & radiators with new gaskets, their fixing after proper cleaning. (There should be no leakage of oil after replacement.)

Filling of oil in above transformer after Centrifuging and treatment of Transformer Oil. BDV of oil should be Min 40 kv after centrifuging.

Painting of 10 mva transformer with one coat of red oxide primer and two coats of ISI marked LVS gray paint.

Lighting arrangement with wiring in switch yard, control room and in porch area. Street LED light of 110 wt on already existing pole. Painting of 6 Nos. street light pole with one coat of Redoxide and two coats of Aluminium Paint.

Wall painting of SDO office, control room and area of control room entrance with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint “Luxol” or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work.

Providing and fixing of earth mat for VCB in control room.

Supply and fixing of standard quality of water cooling machine 20 Litre & RO machine including cost of all material, labour and proper compelition of work including plumbing, electric work etc. RO and water cooling machine should be duly ISI marked.

Refilling of fire safty cylinder of 9Kg. in active condition in the control room.

Supply of fire safety buckets including sand.

Supply and fixing of approved quality exhaust fan (Crompton, Bajaj, or equivalent make) including all cost of all materials, labour, T&P etc. for proper completion of the work. Above work also includes making of hole of diameter 24 inch in wall for fixing of exaust fans.

Replacement of old/damage wooden doors along with door colour with putty and painting of standard make.

Repairing and painting of channel gates of control room (size-6.5*7sqf) and SDO office (size-6.5*7sqf)

SHARDA ENTERPRISES

A. A. ENGINEERING CO.