Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.7 LAccepted-AOC | L1 | Accepted-AOC Approved by Accepting officer | |
| 2 | L2₹7.1 L+₹10,642 (1.52%)Rejected-Finance NEAR SVN UNIVERSITY NARSINGHPUR ROAD SIRONJA SAUGOR MP 470228 | SAUGOR | SAGAR | MP | 470228 | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹7.7 L+₹72,206 (10.3%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹8.5 L+₹1.5 L (22.1%)Rejected-Finance | L4 | Rejected-Finance Not Lowest Bidder |
| Sl No | Description | Qty | Unit | M/s DS Khekde L3 | M/S JAINENDRA KUMAR JAIN L2 | SUNIL KUMAR KORPAL L4 | m/s mahendra kumar khare contractor L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling of asbestos cement sheet (corrugated or semi corrugated) in roofing including ridges etc complete all as specified and directed by Engineer-in-Charge. | 840 | SQM | 10 ₹8,400 | 4 ₹3,360 Lowest | 5 ₹4,200 | 5 ₹4,200 |
| 2.00 | Material and labour for 6mm thick asbestos cement corrugated or semi corrugated sheet in roofs walls etc fixed with 'L' or 'J' type hook bolt complete all as specified and directed by Engineer-in-Charge. | 50 | SQM | 330 ₹16,500 | 440 ₹22,000 | 200 ₹10,000 Lowest | 330 ₹16,500 |
| 3.00 | Material and labour for asbestos cement two piece adjustable serrated ridge corrugated or semi corrugated sheets fixed with 'L' or ‘J’ type hooks & bolts complete all as specified and directed by Engineer-in-Charge.. | 10 | RM | 360 ₹3,600 | 30 ₹300 Lowest | 100 ₹1,000 | 200 ₹2,000 |
| 4.00 | S & F Pre- painted galvatume aluminum zinc coating GI based corrugated/manglore pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.. | 690 | SQM | 650 ₹4,48,500 | 656 ₹4,52,640 | 800 ₹5,52,000 | 600 ₹4,14,000 Lowest |
| 5.00 | S & F Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. | 90 | SQM | 550 ₹49,500 | 556 ₹50,040 | 500 ₹45,000 Lowest | 650 ₹58,500 |
| 6.00 | Dismantling timber scantlings 40 Sqcm and over in any position framed / unframed works as in purlin or rafter truss etc complete all as specified and directed by Engineer-in-Charge. | 0.5 | Cum | 200 ₹100 | 300 ₹150 | 150 ₹75 Lowest | 1,000 ₹500 |
| 7.00 | S & F Rolled sections Fe 410 -W (GdeE- 250) qualityA as in main and cross beams,columns, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed by Engineer-in-Charge. | 200 | Kg | 85 ₹17,000 | 70 ₹14,000 Lowest | 90 ₹18,000 | 80 ₹16,000 |
| 8.00 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 incl a coat f red oxide primer complete all as specified and directed by Engineer-in-Charge. | 400 | Kg | 86 ₹34,400 | 70 ₹28,000 Lowest | 90 ₹36,000 | 80 ₹32,000 |
| 9.00 | S & F plates,(plain or cheqered) channels,square cut or notched ( ordinary and counter sunk) forming holes,with riveted, bolted or welded attachment complete all as specified and directed by Engineer-in-Charge. | 80 | Kg | 82 ₹6,560 | 70 ₹5,600 Lowest | 90 ₹7,200 | 105 ₹8,400 |
| 10.00 | Material and labour for preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer on surfaces over 10cm width or girth ccomplete all as specified and directed by Engineer-in-Charge.. | 150 | Sqm | 40 ₹6,000 | 35 ₹5,250 | 30 ₹4,500 Lowest | 35 ₹5,250 |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
4 Aug 2025, 6:00 pmClosed
Madan Lal Beniwal, IDSE, AEE Civil
AGE I DHANA PIN 470228, DIST SAGAR, MP
REPAIR TO AC SHEET AND GI SHEET, FALSE CEILING AND ROOFING CONNECTED ITEMS TO CERTAIN BLDGS OF NCO ACADEMY AT DHANA MIL STATION
2025_MES_718162_1
8300/DH/16/E8
Open Tender
Civil Works
Item Rate
180 days
AGE (I) DHANA
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Assistant Garrison Engineer (I) Dhana
₹20,000
Yes
10 Oct 2025
7 Jul 2025
6 Aug 2025
7 Jul 2025
4 Aug 2025
21 Jul 2025
Amount
Dismantling of asbestos cement sheet (corrugated or semi corrugated) in roofing including ridges etc complete all as specified and directed by Engineer-in-Charge.
Material and labour for 6mm thick asbestos cement corrugated or semi corrugated sheet in roofs walls etc fixed with 'L' or 'J' type hook bolt complete all as specified and directed by Engineer-in-Charge.
Material and labour for asbestos cement two piece adjustable serrated ridge corrugated or semi corrugated sheets fixed with 'L' or ‘J’ type hooks & bolts complete all as specified and directed by Engineer-in-Charge..
S & F Pre- painted galvatume aluminum zinc coating GI based corrugated/manglore pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge..
S & F Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
Dismantling timber scantlings 40 Sqcm and over in any position framed / unframed works as in purlin or rafter truss etc complete all as specified and directed by Engineer-in-Charge.
S & F Rolled sections Fe 410 -W (GdeE- 250) qualityA as in main and cross beams,columns, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed by Engineer-in-Charge.
S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 incl a coat f red oxide primer complete all as specified and directed by Engineer-in-Charge.
S & F plates,(plain or cheqered) channels,square cut or notched ( ordinary and counter sunk) forming holes,with riveted, bolted or welded attachment complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer on surfaces over 10cm width or girth ccomplete all as specified and directed by Engineer-in-Charge..
Demolition of brick / stone masonry built in cement mortar, complete all as specified and directed by Engineer-in-Charge..
M&L for brick work with Subclass 'B' bricks in cement mortar 1:6, straight or curved on plan exceeding 6m mean radius, complete all as specified and directed by Engineer-in-Charge.
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water , etc complete all as specified and directed by Engineer-in-Charge.
Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces using integral water proofing compound 3% by weight of cement and finishing the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.. Note:- WPC shall be measured and paid saperately.
Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge.
M&L for applying two coats of White wash on new wall surfacecomplete all as specified and directed by Engineer-in-Charge.
M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying two coat of cement base paint on surfaces of walls complete all as specified and directed by Engineer-in-Charge.
Material and labour for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Gl frame work for seamless ceiling comprising of Gl erimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to re/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre, to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed by Engineer-in-Charge.
Exposed metal frame ceiling with calcium silicate board of iliceous and calcareous material reinforced with cellulose ibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed by Engineer-in-Charge.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including snap grid frame work complete all as specified and directed by Engineer-in-Charge.
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in square n/exc 0.5 Sqm each pane all as spd & directed including hacking out of glass complete all as specified and directed by Engineer-in-Charge.
3mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm each including hacking out of glass complete all as specified and directed by Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips complete all as specified and directed by Engineer-in-Charge.
NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 29750 /- ]
M/S JAINENDRA KUMAR JAIN (BID ID -3373359)
M/s DS Khekde (BID ID -3373298)
SUNIL KUMAR KORPAL (BID ID -3382283)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .