SPECIAL REPAIR TO HANGAR DOORS, BIRD PROOFING AND CERTAIN MISC WORKS IN VARIOUS HANGARS AT AF STATION TAMBARAM

Amount

Excavating in post holes (or similar holes) each not exc 0.5cu m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation and getting out in soft/loose soil all as specified and directed.

M&L for plain cement concrete1:4:8 type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 internally and finished even and smooth without using extra cement complete all as specified and directed.

Dismantling RCC fencing posts or struts of any section embedded in concrete, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

S&F for Joist, channel, angle,MS Flat or tee sections, fixed independently, without connecting plates, etc. cut to ordinary lengths as in fencing posts complete etc as in chain link fencing posts and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc for securing wire mesh etc, and similar work conforming to Fe-290 Gde E-165 all as specified and as directed

S&F for MS round bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia for strenthening of fencing as directed.

S&F for mild steel screw bolts (machine made), diameter of shank 11 to 15 mm, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exc 15 mm long all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc, including provision of binding wire all as specified and directed.

Supply only chain link MS galvanised fencing with 3 to 4 mm dia wire, size of mesh 50 x 50 mm, made up to mattress or cages, all as specified and as directed

S&F in repairs galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings andstraining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, as directed (each line wire to be measured)

M&L preparation of newly plastered surfaces and applying two coats of cement base paint complete all as specified and as directed

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed

Returning filling in including spreading, leveling, watering and well ramming in layers n.exc 25cm thick complete all as specified and as directed

Removing excavated material n exc 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed

M&L Plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate), 25mm thickness as in levelling course of floors etc complete all as specified and as diretced

M&L Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed

M&L glazed ceramic tiles in vertical surface 300x 450x 7mm/ 350X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thick all as specified and directed.

Taking down PVC chowkats/Frames of area not exc 1.5 Sqm with shutter (without taking off shutters from the frame) each all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made outof 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification &drawing) complete all as specified and directed

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face fiixing in frame at site as per specification & drawing complete all as specified and directed

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane for ventilator shutters complete all as specified and as directed

S&F Aluminium anodised,125mm long barrel tower bolts of extruded section and fixed.

S&F Extruded aluminium alloy handles,150mm long fabricated type, anodised complete all as specified and as directed

S&F 100 mm long stainless steel butt hinges for PVC doors

S &F vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap 32mm dia polyethylene fush pipe etc compete all as specified including provn of lime concrete bedding fixed in repairs all as specified and directed.

S&F in repairs Wash down water closet (Pedestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device, flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for high/low level cistern etc compete all as specified and as directed

S&F in repairs PVC valveless, syphonic action type of 10 liter capacity, flushing cistern,low level, white, with inlet, ball valve, float and handle including brackets and PVC connections of 15mm size with PTMT nuts of length 600mm etc, complete all as specified and as directed

M&L PTMT min weight 260gm Bottle trap half or full threaded bore of discharge pipe 32mm fixed in repairs all as specified and directed.

S&F for angular stop cock 15 mm bore chromium plated with crtuch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union fixed as in repairs all as specified and directed.

S&F for 15 mm bore pillar tap chromium plated long neck with aerator fancy type with crutch handle screwed down high pressure with long screwed shanks and fly nuts srewed for iron pipes or for brass ferrule fixed in repairs all as specified and directed.

S&F 600x450 bevelled edged looking mirror 6mm thick with Design wooden frame work fitted with 6mm thick commerical ply or AC sheet backing to mirror fixed as in repair.

Supply and Fix in repairs Health faucet ABS body 15mm dia pipe with 1.25metre long PVC tube with wall hook, Chromium Plated all as specified and directed.

Supply and fixed soap dish size 160x160x90mm, matt finished chromium plated all as specified and directed by engr in charge

S&F towel rail 600mm long with flanges, chromium plated all as specified and directed

S&F for angular two way stop cock 15 mm bore chromium plated with crtuch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union fixed as in repairs all as specified and directed.

S&F Stop valves 15 mm bore fancy type, CP with long shank & cup (concelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed.

S&F in repairs counter type any shape vitreous china wash basin of size 595-690mm including cutting for and pinning in ends of brackets or errecting stand white 32mm dia polyethylene waste pipe,PVC connections 15 mm size with PTMT nuts of length 300mm,32mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed etc including brackets complete all as specified and as directed

S & F 15mm long body Bib taps cast copper alloy, fancy type, screwed down, screwed for iron pipe or for brass ferrule for fancy type chromium plated fixed in repair.

S&F in repairs Vitreous China urinals, half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed

S&F Urinal spreader of CP any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed

S&F for PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed

Taking down cement or cement lime plaster, on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.all as specified and directed.

M&L Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

M&L Rendering 5mm thick in CM 1:3 on as in ceiling of fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

M&L Preparation of new surfaces of walls and applying three coats of white wash on walls complete all as specified and as directed

M&L Preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed

M&L preparation of new surfaces of external walls and applying one coat of primer and two coats of cement based paint complete all as specified and directed

Taking down GI steel tubing and connections, 15mm bore including cleaning for refixing or removal to store

Taking down GI steel tubing and connections, 25 or 32mm bore including cleaning for refixing or removal to store

Taking down GI steel tubing and connections, 40mm bore including cleaning for refixing or removal to store

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls all as specified and as directed

S&F 16 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls , ceiling fixed complete all as specified and as directed

All as per Sl.item No. 59 above but outer diameter of the pipe is 25 mm

All as per Sl.item No. 59 above but outer diameter of the pipe is 40 mm

Taking down rain water pipes, waste/soil pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc including cleaning or refixing or removal to store all as specified and as directed

S&F in repairs PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F in reairs PVC (SWR) bends with access door any radius 110mm bore complete all as specified and as directed

S&F in reairs PVC (SWR) bends with access door any radius 75mm bore complete all as specified and as directed

S&F in repairs PVC (SWR) branch piece,110mm bore single (single Y) equal or unequal with access door complete all as specified and as directed

S&F in repairs PVC (SWR) branch piece,75mm bore single (single Y) equal or unequal with access door complete all as specified and as directed

S& F in repairs PVC (SWR) junction single,(Single T) 110mm bore with access door equal or unequal complete all as specified and as directed

S& F in repairs PVC (SWR) junction single,(Single T) 75mm bore with access door equal or unequal complete all as specified and as directed

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed

S&F in repairs PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed

S&F in repairs rotational moulded polyethylene water storage tanks 1000 lit capacity three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed

S&F in repairs 25mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed compete all as specified and as directed

S&F in repairs 25mm bore Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed

Demolition of brick work built in CM including all quoins arches pillers etc all as specified and as directed

M&L Half Brickwork with fly ash bricks, straight or curved on plan exc 6m meanradius, built in old size bricks CM 1:4 complete all as specified and as directed

M&L RCC type B1,1:2:4 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F formwork to soffits of suspended slabs (flat/curved) such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) fair finished complete all as specified and directed

M&L Screed bed or bedding layer of mortar in CM 1:6, 20mm thick for laying floor finishes

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms countersunk wash bashin tops etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

M&L Rounding to edges of granite stone / kota stone etc. slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed

Demolition of cement concrete floors and pavings exc 15 cm thickness (below or above ground level) complete all as specified and as directed

M&L Plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate),with WPC 25mm thickness as in floor finishes like 1st layer of sunken floor treatment and the like etc complete all as specified and as diretced

M&L Rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete of floor/wall surfaces with WPC as in 1st layer of sunken floor of toilet complete all as specified and as directed

M&L bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5kg. per sqm per coat complete all as specified and as directed

S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface including primer by forced application complete all as specified and as directed

Supply only Liquid water proofing compound

M&L Plain cement concrete type E2, 1:5:10 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, internal dia of pipe 150mm including necessary excavation if required complete all as specified and as directed

M & L for Reinforced concrete pipes 150mm dia, class NP3, laid & jointed complete laid in trenches and jointed as speciied

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested;in cement concrete 1:3:6, Type C2 (using 40mm graded stone aggregate) for 150mm dia pipes complete all as specified and as directed

M&L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching for 150mm dia as required and as directed

S&F SFRC cover of size 750mmX750mmX25mm thick with edge protection MS flat 25mmX3mm of load bearing capacity 5 to 7 MT including handle, bar etc complete all as specified and as directed

S&F SFRC cover of size 900mmX900mmX25mm thick with edge protection MS flat 25mmX3mm of load bearing capacity 5 to 7 MT including handle, bar etc complete all as specified and as directed

S&F SFRC cover of size 1200mmX1200mmX25mm thick with edge protection MS flat 25mmX3mm of load bearing capacity 5 to 7 MT including handle, bar etc complete all as specified and as directed

M&L for Precast cover slab 1:2:4, type B1 (using 20mm graded aggregate) in landings, cover slabs (for manholes etc.,) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4, for manholes complete all as specified and as directed

M&L PVC corner beading for wall tilling complete all as specified and as directed

Dismantling AC corrugated or semicorrugated sheets in roof covering / wall cladding

M&L 6mm thick AC corrugated sheet on roof covering fixed with L or J type hook all as specified and as directed

S&F in repair 2mm thick fibre glass reinforced transulent corrugated sheeting with two corrugate side lap fixed with 'L' or 'J' type hook fixed in roof ,wall etc all as specified and as directed

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding towall, fixed with self tapping screws all as specified and as directed

S&F for Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding towall, fixed with self tapping screws all as specified and as directed

S&F in repairs PVC based expanded metal sheet, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia in not exc 4kg or fixing with galvanised steel staples supplied and fixed at 10m height approx hanging with10mm thick plastic rope complete to wood or steel members all as specified and as directed.

All as per Sl.item No.109 here in before but except material fixing with annealed mild steel wire not less than 0.9mm fixing at 10m height approx hanging with10mm thick plastic rope complete to wood or steel members complete all as specified and directed.

Taking down steel rolling shutters pull and push type not exceeding 14 Sqm of clear opening each incl hood cover and cleaning the sides of shutters, suspension shaft and guide channels and greasing al the moving parts of rolling shutters and straining of rolling shaft, tightening and re-fixing the same incl hood cover complete all as specified and as directed

Cleaning and greasing all moving parts of hanger mild steel door shutter of area exc 20 Sqm, straightening the member if any as required for smooth functioning of hanger door all as directed .

Taking down door frames with shutter area exc 1.5 sqm but not exc 4.0 sqm all as specified and as directed

S&F for Powder coated aluminium frame for doors, windows, ventilators,partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed

S&F for Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed

S&F for Powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed

S&F for Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle all as specified and as directed

S&F in repair aluminium powder coated grills (pattern DG-104) weight of 2.00 to 3.20 Kg/Sqm for windows, ventilators, etc including jointing, cleats etc and fixed with medium screws into walls / frame work etc complete all as specified and as directed

S&F in repair mortice lock of mild steel vertical type of size 150mm 6 Lever

S&F in repairs door closer, aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80kG as directed.

S&F in pre laminated particle board 12 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination with lipping as in doors of cupboards and cabinets all as specified and as directed

Hacking out old broken glasses any thickness size, quality or description from steel/wooden frames fixed with putty or with beads all as specified and as directed

S&F 5.5 mm thick plain ordinary glass fixed in squares not exc 0.5 Sqm in each panes with wooden beading or glazing putty/alumiium partitions etc all as specified and as directed

S&F 5.5 mm thick plain ordinary glass fixed in squares exc 0.5 Sqm in each panes with wooden beading or glazing putty/alumiium partitions etc all as specified and as directed

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

S&F for Mild steel sections for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including welding etc all as specified and as directed

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulationboards/slabs/blankets, any thickness, including cover fillets, complete all as specified.

S&F for anodised aluminium snap grid frame work for false ceiling with using 25x25mmx2mm wall angle and 25x25mmx2mm T sections all as specified

S&F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F 10mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws all as specified and as directed

S&F in repairs sink with drainage board made of stainless steel sheet 0.9 mm thick ,with plug washers and waste pipe including bedding in CM to drwaf wall or incuding l fixing cantilever brackets and conecting union to pipe over all sink size 915mmx450mm bowl size 410mm x 330mm x 160mm all as specified and as directed

M & L Non skid ceramic coloured tiles area of each tile exc 0.11 sqm but nt exc 0.18 sqm in floors etc, set and jointed in neat cement slurry over & including 15mm thick screed bed of mortar 1:6 and pointed with white/ coloured cement to match incl tile spacer and grout as directed.

All as per Item No 132 above but in Skirting including 10 mm thick backing coat in CM 1:3.

Dismantling of stone slab of any description laid, bedded and pointed in any mortar

M&L for Green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms,staircase landings and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, including 15 mm thick screed bed in CM 1 :4 in floors etc complete all as specified and as directed.

M&L for Marble edge moulding to 18-20 mm thick stone of counter vanities etc incl machine polishing to edge to give high gloss finish etc complete all as specified and as directed

M&L preparation of old decorated surfaces of wood work exc. 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, sockets,ceiling rose, pendents, regulators,sockets,light fitting etc complete as ordered and removing retrived materials and making good the disturbed surface of wall, floors, ceiling etc. complete all as directed and specified.

Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes with earth dolly duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following:- (a) One light Point Controlled by one oneway switch

All as per Item No.139 above but for Sone fan point controlled by one switch all as specified and as direcetd.

All as per Item No.139 above but for one socket poit on independent board all as specified and as direcetd.

S&F modular switch flush type 5 Amps, 240V single pole one way all as specified and as direcetd.

S&F PVC ceiling rose two to three terminal plate and jumbo type all as specified and as direcetd.

S&F Modular switch socket combination 3 pin 5 Amps flush type 240V all as specified and as direcetd.

Supply and fix recess mounted 2 x 2 panel LED light fitting complete and connecting into electric circcuit and all as per Havells Cat part No PLANO2X2PLR42WLED857S or Equivelant make from list of Makes.

Supply and fix in replacement of LED 1x20 Watt batten with Microwave motion techonology for providing an energy effcient solution and with aluminium housing & integrated electronic driver complete all as per Havells Cat No.LUMILINESMART20WLED865PCWH or Equivalenet make from list of makes including testing all as directed. .

Supply and fix surface and wall mounted 10 Watt LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & intergrated electronic driver including LED lamp complete all as per Havells Cat No.ENDURALINEARNEOBS 10W LED 865SPCSS or Equivalenet make from list of makes including testing all as directed.

S&F exhaust fan made of sturdy Engineering Plastic complete with louvers 250mm sweep, copper winding,230 volts,1200 RPM including connecting wires of 3 core 0.50 sqmm from ceiling rose to fan including making holes in wall and making good etc complete all as specified and directd.

Taking down exhaust fan, ceiling rose, dismantling blades and removing fan and blades to store and refixing in same position including provn of required cable etc complete all as specified and directed.

Painting exhaust fan in situ any sweep with synthetic enamel paint including filling cavities with filler and cleaning etc complete as directed.

M&L for rewinding exhaust fan 380mm sweep with super enamelled copper widing wires of same gauge after cutting and removing old burnt winding including cleaning of rotor and varnishing, heating and providing fresh insulating materials all as specified and directed.

M&L Sub main wiring 2 x 4.0 Sqmm single core FRLS PVC insulated unsheathed cable single core multistranded copper conductor 1100 volts grade drawn through with and including suitable size of PVC conduit and conduit accessories fixed on concealed with suitable clamps/saddles including one run of 4.0 sqmm FRLS PVC insulated copper cable for continuous earth conductor connected to common earth dolly all as specified and as directed . ( Note : 3 Runs of 4sqmm wire and 1 run of PVC conduit together shall be measured as one unit length)

Supply and fixing MCB SP 06 to 32 Amps, 10KA 240 volts,50Hz all as specified and as directed

Supply and fixing MCB SPN 05 to 32 Amps 10KA 240 volts all as specified and as directed

Supply and fix in replacement of Single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 /30 Amp 240 Volts all as specified and as direcetd

S&F sheet metal enclosure with DB , 230volts, SPN 4 way with suitable bus bar and provision for MCBss/ Isolators fixed and including wooden board fixed on wall and connecting with all connections all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600X600X6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5M below normal ground level connected to GI earth lead wire 4.0mmdia by means of nuts, bolts, check nuts and washer of GI steel and connecting to testing point including provision of test point and all as shown in electrical plate No. 3 of SSR Pt I. The work shall inclusive of necessary earth work and PCC chamber 1:3:6 in type CI with 8mm CTD bar reinforcement both ways at 140 mm bents to centre complete all as specified and as directed including taking down old unserviceable earthing .

Raju Builders

M/s KM Marimuthu Achary

DELTA CONSTRUCTIONS

M R Govinda Reddy and Sons

Varsa Constructions

kvs constructions