REPAIR AND MAINT OF STREET LIGHTS AND CONNECTED ITEMS UNDER ZONE-III AREA UNDER GE(S) JAIPUR

Amount

M&L for testing disconneting and taking down the U/S street light fitting from pole or wall and repair the same (of any type, capacity & make) by replacement of spare parts & making the fitting functional and refixing after repairs all as specified and directed by Engineer-in-Charge. Note : (i) Major (excludes oiling/geasing/cleaning/connection etc) Spare parts/accessories required to be replaced shall be measured and paid seperately as "Supply only" under the relevent items.

M&L for disconneting and taking down U/S High Mast light fitting from the (Highmast post) steel tower and repair the same(of any type, capacity & make) by replacement of spare parts & making the fitting functional and refixing after repairs all as specified and directed by Engineer-in-Charge. Note : Spare parts/accessories required to be replace shall be measured and paid seperately as "Supply only" under the relevent items.

S&F in replacement of 1100 Volts grade heavy duty cable with inner sheathing of PVC tape and overall PVC sheathed in service connection three core stranded aluminum conductor of size 4.0 sqmm, ISI marked, drawn through steel pole from junction box to street light fitting or for OH connections complete all as specified and directed.

S&F in replacement of New Generation Energy Saving 150 W LED flood light powder coated PDC aluminium body with toughened glass vision having wide operating voltage range & lumen efficacy>105 lm/w.Surge protection upto 10 KV PF>0.95 temp 5700 K to 6500 K IP 66 complete.Make:- Syska Cat Part No: SSK-BLE-150W or equivelent cat part in other makes as per Appendix 'B'.

same as item no 4 but of 250 Watt complete. Make:-Syska Cat Part No: SSK-BLE-250W or equivelent cat part in other makes as per Appendix 'B'.

S&F in replacement of 60 W LED street light fitting with lens optics on LEDs, IP 66 protected luminaire fixture made from pressure die cast aluminum housing & heat resistance toughned glass cover with one number of 60 W driver, having wide operating voltage range, surge protection 10 KV as directed by Engineer-in-charge including taking out old U/S street light fitting of any type/size complete. Make:- C&S Cat Part No: LSTP60CDLM or equivelent cat part in other makes as per Appendix 'B'. Note for item No 6 to 8: Reducer including cutting, welding etc if required at site for installing LED fiitings shall be deemed to be included in quoted rates.

same as item no 6 but of 70 Watt complete. Make:- C&S Cat Part No: LTEF70WHPLED or equivelent cat part in other makes as per Appendix 'B'.

same as item no 6 but of 100 Watt complete..Make:- C&S Cat Part No: LTEF100WHPLED or equivelent cat part in other makes as per Appendix 'B'.

Supply only in replacement of LED Driver with surge protector suitable for 45 to 60 watt LED fitting complete all as specified and directed by Engr-in-charge complete.. Note for item No 9 to 13 :-Driver & surge protector shall be of same make or suitable for LED fitting as available at site for repair under item 1.0 here in before.

Same as item no 9 but of 70-80 Watt complete.

Same as item no 9 but of 90-100 Watt complete.

Same as item no 9 but of 150 Watt complete.

Same as item no 9 but of 250 Watt complete.

S&F in replacement of polycarbonate unbreakable junction box size 260 x 210 x 116 mm suitable for pole mounted outdoor type IP 65 insulated complete with FI clamp & nut, bolts, washers and including resin type terminal block heavy duty suitable for ring lugs with phase seperators between R, Y, B, N terminals and one MCB SP 6 amp 10 KA, all duly mounted on din cannel, cable glands for cable entry incl GI double clamp made out of 25x4 mm GI strip complete all as specified and directed. Make : Hensel Cat Part No K9350 or equivelent cat part in other makes as per Appendix 'B'.

Supply,lay,connect and commission XLPE insulated LT underground cable of size 16 sqmm 4 core screened PVC bedded galvanised steel strip armoured heavy duty with multi stranded aluminium conductor 1100 volts grade (ISI) marked laid in trenches, ducts, pipes or fixed on pole etc including taking out existing cable.

same as item no 15 but of 25 Sqmm 4 core complete.

Labour only for repair of U/S timer switch assembly of any type/rating & accessores/ spares including reconnecting and testing complete. Note : - Supply only accessories/ spare parts as equired shall be measured & paid separatley under respective items of Sch `A`

Supply only following accessories/ spares parts :-

(a ) Contactors 4 pole 63 Amp

(b) Contactors 4 pole 40 Amp

(c)Timer Switch Electronic digital type

Excavtion in trenches n.exc 1.5 meter wide and n. exc 1.5 meter in depth for foundation etc or for laying of cable etc and getting out in soft/loose soil.

M&L sand cushioning to PVC underground cable with screened and washed sand and punning to provide a required cover.

M&L bricks for protection cover to underground cable (with old size sub class 'B' bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjaccent brick not exceeding 10 mm as directed by Engineer-in -charge.

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25 cm depth.

Removing of excavated material (soil) to a distance n.exc 50 meter and depositing where directed at a level n.exc 1.5 meter above the starting point.

M&L for cutting the existing cable from loop and making end termination with aluminium lugs without jointing kit with cable glands suitable for LT U/G cable of following sizes:

a) 2x6 to 2x16 sqmm .

b) 4x10 to 25x4 sqmm .

Same as item No. 24.02 but with including end termination jointing kit

M&L for PCC (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in coping/pedestal of poles including providing necessary formwork for fair finished exposed concrete surfaces including demolition of old coping complete all as specified and directed.

M&L taking down/dismentling of existing PCC poles of 9 mtere long lof size 102X172mm at top and 102X279 at bottom, class 10 complete all as directed by Engr-in-charge

Supply and fix steel tubular poles of 9 mtr length with cast iron base plate,finial taper plug, bolts nuts and screws specified type 410 SP-31 including finish with one primer coat and 2 coats of aluminium paint after preparation of surface and back & white straps 5x30 cm alternatively all around upto 1.5 m above GL, writting of MES pole nos etc including taking down old U/S steel Pole complete all as specified and directed

M & L for painting to surfaces of existing Steel tubular pole 9.0/11.0 mtr long with attached accessories (cross arms, clamps, GI protection pipe etc) with one coat of aluminium paint after preparation of surfaces including painting to poles with two coats black & white paints in straps 5 x 30cm alternatively all round the poles from the bottom and writing the no of pole as per direction complete all as specified & directed.

M&L for Trimming of tree branches up to 3.0 m alround the conductor (2/3/5 conductor) in vicinity of electric supply pole/street light pole/solar modules & depositing at places n exc 50m all as directed by Engineer-in-Charge.

Material & Labour for boring under road/drain by manual/machine method for inserting GI tubing up to 50 mm dia for cable protection all as specified and directed.

Supply and lay tube GI pipe light grade of 40 mm bore in trenches/ road crossings/ floor etc. with all fittings for protection of cable complete all as specified & directed.

Material & labour for fixing at poles GI bracket swan neck type of Size 40 to 50 mm bore light grade complete with clamps channel and angle iron including complete fitting and fixture including taking out old rusted bracket all as specified and directed.

SHREE BHAGWATI ENTERPRISES

LAKSHMI ASSOCIATES

M/s Prakash Enterprises

Shree Karni Electrovision

JAGDAMBA CONSTRUCTION COMPANY

S.R.Enterprises