Renovation of Boundary Wall With Gate and Construction of Toilet Block for Agriculture in the Campus of RINPAS, Ranchi For the Year-2021-22

Amount

Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Dismantling R.C.C.work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Earthwork in excavation in foundation trenches in Hard soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.

Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement compacted volume).

Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing designation 75 B brick work in C.M.(1 :6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level:1:2:4(1cement:2 coarse sand(zone-iii):4graded stone aggregate 20mm nominalncluding slaking of lime, screening, mixing dry and wet on water tight platform, placing in position and ramming till compaction is achieved, curing, side shuttering, taxes and royalty all complete, as per building specification and direction of E/l.

Providing and laying in position cement specified grade of reinforced cement concrete excluding the cost of centering,shuttering ,finishing and reinforcement-All work upto plinth level 1:1½:3(1cement:1½ coarse sand(zone-iii):3graded stone aggregate 20mm nominal

Reinforced cement concrete work in wall(any thickness) including attached plasters,butteresses,plinth and string courses,fillets,columns,pillars,piers,abutments,posts,and struts etc above plinth level upto floor five level,exccluding the cost of centering,shuttering,finishing and reinforcement with 1:1.5:3(1cement:1.5coarse sand(zone III):3 grade stone aggregate 20mm nominal size)

Reinforced cement concrete work in beams,suspended floors,roofs having slope up to15 landing,balconies,shelves,chajjas,lintels,bands,plain window sills,staircase and spiral stair case above plinth level up to floor five level,excluding the cost of centering,shuttering,finishing and reinforcement,with 1:1.5:3(1cement:1.5coarse sand(zone III):3 grade stone aggregate 20mm nominal size)

Centering and shuttering including structting,propping etc and removal of foundations,footings,bases of columns,etc for mass concrete

Centering and shuttering including structting,propping etc and removal of foundations,footings,bases of columns,etc for mass concreteLintels,beams,plinth beams,girders,bressumers and cantilevers,

Centering and shuttering including structting,propping etc and removal of foundations,footings,bases of columns,etc for mass concreteColumns,pillars,piers,Abutments,posts and struts

Providing tor steel reinforcement of10MM,12MM&16MM DIA . dia. bars as per approved . design and drawing with cutting ,bending and binding with annealed wire with cost of wire removal of rust,placingthe rods in position(excluding carriage of bars to work site) all complete as per building specification and direction of E/I(TMT Fe 500)(only valid for Tata(Tiscon),SAIL,JSPL,Electrosteel steels Ltd Bokaro and Vizag(RINL)

(b) 10mm .(TMT Fe 500)(only valid for Tata(Tiscon),SAIL,JSPL,Electrosteel steels Ltd Bokaro and Vizag(RINL)

(c) 12mm .TMT Fe 500(only valid for Tata(Tiscon),SAIL,JSPL,Electrosteel steels Ltd Bokaro and Vizag(RINL)

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/l.

Supplying of M.S .Angle 50x50x6mm approved make with royalty,carriage and all taxes all complete job as per specification and direction of E/I.

Labour for fabricating, erecting, hoisting and fixing in position structural steel work in R.S. joist, channel, Angle, Tee, flat, plate, latice member, built up compound section in column, girder, staircase or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding (machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/l.

Providing and fixing concertina coil fencing with required dia 600mmdia 10metre openable length(total length 90m)(having 50nos,round per 6 metre length) up to 3 m height of wall with existing angle irn ‘Y’ shaped palced 2.4m or 3.00m apart and with 9 horizontal R.B.T.stud tied with G.I.staples and G.I.clips t retain horizontal including necessary bolts or G.I.barbed wire tied to angle iron all complete as per direction of Enginner-in-charge withreinforcedd barbed tape(R.B.T)/spring core(2.5mm thick) wir f high tensile strength of 165kg/sqmm with tape (0.52mm thick) and weight 43.478gm/metre (cost of M.S.angle,C.C.blocks shall be paid separately)

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification)

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direcition of E/l.

steel work welded in built up sections/framed work,including cutting hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in gratings,frames,guard bar,ladder,railings,brackets ,gatesa and similar works.

Extra for earthwork in hard soil as per specification and direction of E/l (vide classification of soil item-B)

Providing designation 125 mm thick reinforced designation 75 A brick work in C.M (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials , scafolding, raking out joints to 15 mm depth, curing, taxes and royalty ( but excluding the cost of reinforcement) all complete as per building specification and direction of E/l.

Providing and laying in position cement concrete of specified grade1:3:6(1cement:3 coarse sand(zone-iii):6graded stone aggregate 40mm nominal

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4(1cement :2coarse sand(zone-iii):4 graded stone aggregate

Centering and shuttering including structting,propping etc and removal of Suspended floors,roofs,landings,balconies and access platform

Centering and shuttering including structting,propping etc and removal of Weather shade,chajjas,coorbels etc.including edges

Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.

Supplying fitting and fixing M.S.Grill made of 20x6mm M.S.flat as per approved design and drawing properly fabricated with joints continous fillet welded and finished smooth carriage of grill to work site,hoisting as per building specification and direction of E/I(where materials to not supplied by the deptt)

Supplying, fitting and fixing fully glazed steel door, windows or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100x16x3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15x10x10 cm size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/l.

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 19 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l.

Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/l.

Providing 150mm. wide brick drain in cement mortar (1:6) with av. 125 mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. ~ cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l.

Making plinth protection 50mm thick of cement concrete 1:3:6(1cement:3 coarse sand(zone-iii):6graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size ,well rammed and consolidated and grouted with fine sand,including necessary excavation,levelling &dressing &finishing the top smooth.

Providing fixing pressed steel door frame conferming to IS:4351 manufactured from commercial mild steel sheet of 1.25mm thickness including hinges,jamb,lock jamb,bead and if required angle threshold of mild steel angle section 50x25mm or base tiles of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards,lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as direction of E/I. Profile-B

Providing and fixing Ist quality conforming to IS:15622 of (Thickness to be specifed by the manufacturer) of approved make in all colours shades except burgundy,bottle green,black of any size as approved by Engineer-in-charge in skirting,risers of steps and dados over 12mm thick bed of c ement mortar 1:3(1cement:3COARSE SAND) AND JOINTING WITH GREY CEMENT SLURRY @ 3.3KG PER SQM INCLUDING POINTING IN WHITE KCEMENT MIXED WITH PIGMENT OF MATCHING KSHADE COMPLETE. job as per direction of E/I

Providing and laying rectified glazed ceramic wall tiles300x300mm (thickness to be specified by the manufacturer) of Ist quality conforming to IS:15622 of approved make in colours such as white,Ivory,Grey,Fume,Red Brown ,laid on 20mm thick bed of cement mortar 1:4(1cement:4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.

110mm diameter

Providing and fixing PVC pipe fitting including all complete job.

coupler-110 mm dia

Band110 mm dia

shoe110mm dia

clip 110mm dia

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade of: New work (two or more coats applied @ 1.43ltr/10sqmm over and including base coat of water proofing cement paint applied @ 2.20kg/10sqm)

Providing and applying white cement based birla putty of average thickness 1mm of approved brand and manufacturer,over the plastered wall suface to prrepare the surface even and smooth complete.job as per direction of E/I.

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

sand lead 8K.M.

chips lead 22K.M.

Brick lead 8K.M(1K+7P)

local sand lead 3K.M

Stone Metal 20 km lead

Providing and fixing male ended 15 mm dia brass bib cock of approved quality ( wt not less than 350 gms ) with extra socket all complete as per specification and direction of E/l .

Providing and fixing 15mm size C.Pbrass pillar cock(weight not less than 350gms)C.I.body brass spindle pillar cock of approved quality as per specification and direction of E/I

C.I.body brass spindle

Providing and fixing Gun metal full way valve of approved qualtiy, all complete as per specification and direction of E/l

25mm dia

(a) 32 mm dia wt not less than 700 gms

Cutting chajja or concrete for laying G.I pipe and restoring the same with R.C.C (1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of E/l.

Making holes in walls for laying G.I pipes and restoring the same after pipe laying as per specification and direction of E/l

(a) 125 mm thick wall.

(b) 250 mm thick wall.

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/l. (b) Mirrors of 6mm thick plate glass bevelled edge mirror including C.P brass revolving fittings, 3 mm plywood board and C P hinges to fix with mirror

(1)600x450 mm size

(2) C.P brass shop dish container medium quality with screw and hinges etc.

Towel Rail 24"

Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., "p" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.

(a) 580mm longwith 12.5 lit. low level P.V.C. cistern

Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.

(b)10/12.5lit. low level P.V.C. cistern

Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthenware urinal of "Hindustan" " Parry" or any other approved I.S.S. make with all fittings with C.I. or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15 mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grms. , 15 mm P.V.C. alkathene pipe 450 mm long with brass coupling at both ends and doing plumber joints including painting of exposed part with 2 coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/l.

(A) Flat back or standing corner ( 600 mm x 350 mm )

Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l.

Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/l.

(a) For classification of soil item- A

Labour for laying fitting and fixing NP2 R.C.C.spun pipe with colars in lines,level and grade and providing approved jointing materials and joints properly filled to make them leak proof including providing sight rails,bonning rod,night guard ,Red light and barrier etc all complete as per specification and direction of E/I.

150mm dia R.C.C.spun pipe

Supply of NP2 R.C.C. spun pipe with collar as per I.S.s.458-1971 grade including all taxes and duties all complete job.150mm dia

Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar ( 1:6 ) including 12 mm cement plaster ( 1:4 ) with punning on inside and cement plaster (1:6 ) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 Kg.) in foundation and refilling all complete as per specification and direction of E/l.

Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion. Single Tee with door

Single Tee with out door

75mm dia

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)

15mm nominal outer dia pipes

20mm dianominal outer dia pipes

Providing and placing on terrace(at all floor levels) polyethylene water storage tank ISI 12701 marketed with cover and suitable locking arrangement and making necessary holes for inlet ,outlet and overflow pipes but without fillings and the base supported for tank.

Providing and fixingPTMT Grating of appoved quality and colour

C.P.Gratings circular type-100 mm dia

C.P.Gratings circular type-125 mm dia

Making soak pit 2.5m diameter 3.0metre deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100mm diameter,1.8m long complete as per standard design .with F.P..S.Bricks.

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l.

Wiring for light/fan point/exhaust fan point/call bell Point with 1.5 sq.mm FRPVC insulated copper Conductor single core cable in surface/recessed PVC conduct with conduit With pino type switch phenolic laminated sheet Suitable size PVC/G.I Box etc. as required.

group C

Wiring for light / Power plug with 2×4 sq mm FRPVC in insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 nos 4 sqmm. FR PVC insulated copper conductor single core cable for loop earthing as required .

Wiring for circuit/submain wiring along with wiring with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.

2x1.5sqmm+1x1.5sqmm earth wire for circuit.

2x2.5sqmm+1x2.5sqmm earth wire for 5 Amp socket)

S/F piano type switch/socket-Supplying and fixing following pianotype switch/socket on the existing switch box/cover including connections etc as requried.

5/6 amps,one way switch

3pin 5/6 amps,socket outlet

S/F Suitable size G.I.Box on surface/Recess with suitable size ofr phenolic laminated sheet cover in front including providing 3pin 5/6 Amp socket outlet and 5/6 amp. Piano type switch connection as painting etc. as req.

S/F Suitable size G.I./PVC Box on surface/Recess with suitable size ofr phenolic laminated sheet cover in front including providing 6 pin 15/16 Amp socket outlet and 15/16 amp. Piano type switch connection as painting etc. as req.

S/F Brass batton / Angle Holder including connection etc as reqd

S/F the following way SP & N sheet steel M.C.B. D.B. 240 V on surface/recess complete with tinned copper busbar neutral bus bar earth plate dinbar hinged front acrylic cover from MCB knob datachable gland plate inter connection phosphatied and powder painted including earthing etc as required ( without MCB/RCCB/Insolator)

2 way,single door

S/F”B” series SPMCB: supplying and fixing 6 amps to 32amps rating,240 volts ,10KA,"B" curve, ,miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections ,testing and commissioning etc as required.

6/32 amps,single pole."B" series

Supplying and faixing Following rating,double pole 240 Volts isolator in the existing MCD DB complete with connection testing and commissioning etc as reqd

S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230 V 50Hz,single phase supply etc.complete as required.

20/22 W LED Tube light

Supply of metal Exaust Fan 12"(300mm) including all complete job as per direction of E/I.

Supply and fixing 15/16 watt LED Bulb including all complete job as per direction of E/I.(make-philips/Bajaj/Wipro)

Add 12 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

Ms Gokul Construction