Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.5 LAccepted-AOC S O TSERING ANGCHOK R O THANG PA NULL NURLA LEH LADAKH U T PIN 194106 | LEH | LEH | LADAKH | 194106 | L1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | L2₹18.3 L+₹77,320.45 (4.41%)Rejected-Finance LEH 194101 | LEH | LEH | LADAKH | 194101 | L2 | Rejected-Finance Higher side quoted amount | |
| 3 | L3₹18.3 L+₹80,469.55 (4.59%)Rejected-Finance | L3 | Rejected-Finance Higher side quoted amount | |
| 4 | L4₹18.4 L+₹86,337.65 (4.93%)Rejected-Finance SHAMSHU COMPLEX FORT ROAD LEH LADAKH 194101 | LEH | LEH | LADAKH | 194101 | L4 | Rejected-Finance Higher side quoted amount | |
| 5 | L5₹18.7 L+₹1.2 L (6.81%)Rejected-Finance BASGO LEH 194 101 U T LADAKH INDIA | LEH LADAKH | LADAKH | 194101 | L5 | Rejected-Finance Higher side quoted amount |
Tender Value
Refer Docs
EMD Value
₹31,600
Closing Date
18 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
CWE Khumbathang
PROVN OF COOK HOUSE AND ALLIED FACILITIES AT NURLA MIL STN UNDER AGE (I) NIMU.
2023_MES_615851_1
80051/50/E8
Open Tender
Civil Works
Item Rate
180 days
AGE(I) NIMU
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) Nimu
₹31,600
18 Oct 2023
26 Aug 2023
19 Sept 2023
26 Aug 2023
18 Sept 2023
11 Sept 2023
Amount
Surface excavation n exc 30 cm deep and everaging 15 cm deep and getting out in hard and dense soil.complete all as specified and directed by Engr-in charge.
Excavating over areas, n exc 1.5 m deep and getting out at hard / dense soil.complete all as specified and directed by Engr-in charge.
Extra over item No 2 for Each addittional 1.5 m depth or part thereof in depth beyound the first 1.5 m depth. complete all as specified and directed by Engr-in charge.
Excavation in trenches not exceeding 1.5m wide and n exc 1.5m in depth for foundations, laying of pipes etc and not exceeding 10 Sqm on plan for manhole, laying of cable etc and not exceeding 1.5 meter in depth and getting out in hard/dense soil, complete. complete all as specified and directed by Engr-in charge.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm.complete all as specified and directed by Engr-in charge.
Removing excavated material (soils) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point. Complete all as specified and directed by Engr-in charge.
M&L Cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) as in foundation filling and mass concrete. complete all as specified and directed by Engr-in charge.
M&L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate) block masonry with solid block exc 10cm in width and set as in wall etc in CM 1:6.
M & L hard core of broken stone and boulders gauge n exc 63mm deposited spread and level in layers n exc 15cm thick watered and rammed to a true surface.
M & L 75mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base.
M&L machine cut kotastone slab flooring 20-25mm thick over and incl 15mm thick cement screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shed of the slab incl rubbing and polishing complete all as specified and directed by Engr-in charge.
M & L Makrana white Marble tiles 30cmx20cm x 20mm thick machine cut, over and incl 15 mm thick screed bed in CM 1:4 jointed and pointed with grey cement slurry including cutting and polishing types. Complete all as specified and directed by Engr-in charge.
M&L Granite (of Any Type) Tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing type , incl15mm thick sreed bedding layer in CM 1:4 complite all as specified and as directed by Engr-in-charge.
TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips. Complete all as specified and directed by Engr-in charge.
All as per item No 08 here-in-before but of 6 and incl 10mm dia in stirrups, spacers and binders. Complete all as specified and directed by Engr-in charge.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.
Form work to sides of roof beams band and similar and soffits of girder, lintle, cantilever shelves including supports flat rough surface of concrete complete all as spd and directed.
Formwork to sides of column, posts for square and rectangular rough finished surface.
M & L RCC Nominal mix type B-1, 1:2:4 (20mm graded crushed stone agg) as in foundations, indl rafts, footing foundation beams, plinth beams bases for columns, etc: basement slabs, under reamed piles and mass concrete.
M & L RCC Nominal mix type B-1, 1:2:4 (20mm graded crushed stone agg) as in Beams, cantilevers, bressummers, lintels over 1.5m span.
M & L RCC Nominal mix type B-1, 1:2:4 (20mm graded crushed stone agg) as in columns, pillars, posts.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beams, tee, angle, channel or flat sections) including distance piece, cleats etc. conforming to Fe 410 W (Gde- E- 250) quality A. Complete all as specified and directed by Engr-in charge.
S&F Mild steel screw bolts (machine made) with hexagonal or squareheads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long and dia of neck 5 mm but not exceeding 10mm, complete, all as specified and directed by Engineer-in-Charge.
M&L applying two coats of synthetic enamel painting to new surfaces steel based over a coat of red oxide primer exc. 10cm width/girth including preparation of surfaces including filling with filler where reqd all as specified and directed.
S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws as spd and directed.
All as per item No 26 here-in-before but plain steel sheet.
S&F glazed ceramic coloured tiles 300x200x 6 to 7mm thick as in vertical surface such as skirting, dado, etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles incl 10mm thick plastering in CM 1:3. Complete all as specified and directed by Engr-in charge.
M&L for Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement. Complete all as specified and directed by Engr-in charge.
M & L preparation of new plastered surfaces and applying three coats of white wash on walls. Complete all as specified and directed by Engr-in charge.
M&L for Rendering 15mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:4) with WPC and finished even and smooth without using extra cement (Note : WPC will be measured and paid separately). Complete all as specified and directed by Engr-in charge.
Supply only WPC. Complete all as specified and directed by Engr-in charge.
M&L preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer all as specified. Complete all as specified and directed by Engr-in charge.
S & F Mild steel hold fasts, wall ties and similar small articles conforming to Fe 290-0 or E 165. Complete all as specified and directed by Engr-in charge.
M&L 2nd class Hardwood Plain, solid, straight chowkats and framed rabeted on the solid, rounded or chamfered, put together with glue pinned at jounts, supplied and fixed. Complete all as specified and directed by Engr-in charge.
M & L 2nd class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle. Complete all as specified and directed by Engr-in charge. board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats.
S & F Mild steel 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed. Complete all as specified and directed by Engr-in charge.
S & F extruded aluminium alloy handles, 150mm size, fabricated type, anodised. Complete all as specified and directed by Engr-in charge.
S & F Aluminium alloy, anodised, sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed. Complete all as specified and directed by Engr-in charge.
S & F Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm size of extruded sections and fixed. Complete all as specified and directed by Engr-in charge.
S&F 2nd class hardwood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. Complete all as specified and directed by Engr-in charge.
S & F Butt hinges, medium weight, cold rolled mild steel 75 mm long (ISI Mark), fixed. Complete all as specified and directed by Engr-in charge.
S & F extruded aluminium alloy handles, 100mm size, fabricated type, anodised. Complete all as specified and directed by Engr-in charge.
S & F Aluminium anodised, barrel tower bolt of extruded section and fixed, 100mm size of extruded sections and fixed. Complete all as specified and directed by Engr-in charge.
S & F 3mm thk sheet glass, ordinary quality and glazing with oil putty /wooden beading in squares n exc 0.5 sq. m in each pane. Complete all as specified and directed by Engr-in charge.
M & L Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire stapples all as specified and directed by Engr-in-charge.
M&L applying two coats of synthetic enamel painting to new surfaces wooden based over a coat of pink primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where reqd all as specified and directed
M&L for PCC type C-2 (1:3:6) (40 mm graded stone agg) 75 mm thick as in plinth protection. Complete all as specified and directed by Engr-in charge.
S&F 1000 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) hoisted and fixed in position. Complete all as specified and directed by Engr-in charge.
S & F 25mm dia nipple suitable for water tank. Complete all as specified and directed by Engr-in charge.
S & F 25mm bore Unions brass to connect iron to polyethylene and fixed. Complete all as specified and directed by Engr-in charge.
M &L 15mm bore 3-layer PP-R P o l y p r o p y l e n e random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. Complete all as specified and directed by Engr-in charge.
All as per item No 46 here but 20mm bore.
S & F 25mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. Complete all as specified and directed by Engr-in charge.
M & L 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. Complete all as specified and directed by Engr-in charge.
M & L 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal. Complete all as specified and directed by Engr-in charge.
S&F sinks made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in charge.
S & F 40mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed.Complete all as specified and directed by Engr-in charge.
S & 15mm Bib taps, cast copper alloy CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. Complete all as specified and directed by Engr-in charge.
Returning, filling under floor excavated soil including spreading, leveling watering and well ramming in layers not exceeding 25cm thick. Complete all as specified and directed by Engr-in charge.
PVC (SWR) vent cowl of 110 mm bore. Complete all as specified and directed by Engr-in charge.
M&L for stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, bulit in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge.
M&L for stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, laid dry as directed , complete all as specified and directed by Engr-in-Charge.
Use & waste form work to soffits of suspended slabs, such as roof slabs, landings and similar work not exceeding 200 mm thick with rough finished flat surfaces of concrete, complete all as specified and directed by Engr-in-Charge.
M&L RCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate ) as in slabs supported on walls, beams and columns in floors, roofs, complete all as specified and directed by Engr-in-Charge.
M & L Cement concrete 1:4:8 type D2 (40 mm graded crushed stone aggregate ) in foundations, filling and mass concrete. Complete all as specified and directed by Engr-in charge.
Precast reinforced cement concrete, type B-1,1:2:4 (using 20mm graded crushed stone aggreagate)as in manhole cover set in cement mortor 1:4 , complete all as specified and directed by Engr-in-Charge.
M & L for cement concrete type D-2 1:4:8 (using 40mm aggregate) Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in for 110 mm bore pipe. Complete all as specified and directed by Engr-in charge.
PVC (SWR) bends any radius of 110mm bore
M&L for laying broken brick bat 63mm nominal size in bottom of soakage complete all as specified and directed by Engr-in-Charge.
M&L for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc all as directed for following :- (a) One light point/one fan point controlled by one switch
(b) One 3 pin 5 amps socket outlet independent with cables 1.5 sqmm size
(c) One 3 pin 5 Amp socket outlet on same board.
All same as per item No 2 above but with conductor of size 4 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor Cable.
S&F Switch Socket Combination 2 in 1, 3 pin, 6 and 16 amp flush type Universal complete all as specified and directed.
S&F socket 2 in 1,3 pin 5/6 Amp flush type complete all as specified.
S&F switch piano flush type 5/6 Amp, single pole, one way complete all as specified and directed.
S&F switch Socket Combination 2 in 1, 3 pin, 6 amp flush type Universal complete all as specified and directed.
M&L for ceiling rose surface Bakelite 65x50mm two to three terminal complete all as specified and as directed by Engr-in-Charge.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm. Complete all as specified and directed by Engr-in charge.
S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Complete all as specified and directed by Engr-in charge.
S&F basic all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 20 watt, 4 feet long, with all accessories complete all as per specified and as directed by Engr-in-Charge.
S&F sheet metal powder coated versatile single door SPN distribution board, 12 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz . Complete all as specified and directed by Engr-in charge.
M&L for MCB SPN 63 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards. Complete all as specified and directed by Engr-in charge.
S&F in repairs to MCB SP 6-32 Amp with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.
Supply and fixing 1100 Volts grade heavy duty cable PVC flat aluminimum conductor of size 16 Sq mm twin core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, flat or circular. Complete all as specified and directed by Engr-in charge.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.
Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engineer - in - Charge.
Material and labour for un reinforced pre cast concrete cable cover class LV type I, flat size 250 mm x 150 mm x 40 mm.
Sand cushioning to under ground cable complete all as specified in clause 19.75 of SSR Part - I.
Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6.3) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result Complete all as specified and directed by Engr-in charge.
Supply and installation of Solar water heating System,Flat Plate Collector (FPC) type With heat exchanger of 200 LPD Non-Pressure Solar water heater Inner Tank SS 304 with 1 no electric heating coil complete all as specified and directed. Make- V-Guard,
Supply and fix PPR Gate Valves (Brass Insert) of 25 mm bore. Complete all as specified and directed by Engr-in charge.
M & L for Insulation of M S Pipe with PUF slab 30 mm thick with and including applying bituminuous compound and GI cladding with 26 gauge GI sheet complete of size 25mm.complete all as specified and directed.
Supply and Fixing structural steel works as in stairs (Framed) including stringers,treades,landing.balusters,hand rails etc.including cleats ,brackets etc and similar work conforming to and similar work coforming to Fe 410-0 or Fe 310-0.Complete all as specified and directed by Engr-in charge.
M/S TSERING ANGCHOK
Takshos Enterprises
M/S INDUS HIMALAYAN EXPLORERS
M/S SONAM NAMGIAL
M/S LOBZANG NORBOO
TSEWANG DORJAY
CHHIRPON BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .