REPAIR/MAINT AND PAINTING OF VARIOUS TYPES OF STEEL FURNITURE UNDER GE BRICHGUNJ, SRI VIJAYA PURAM

ALMIRAH STEEL LARGE WITH SHELF (FD-1031, FD-67,FD-339 &351)

Taking down/out old unserviceable handle and Supply and fixing new chromium plate handle 100 mm long complete all as specified and as shown on drg .

Taking down/out old unserviceable lock and Supply and fixing new brass lock godrej pattern 6 lever complete all as specified and as shown on drg .

Taking down old shelves MS clamp incl removal of denting for the deshaped portion, welding etc as required and refixing in the same position complete all as specified and as shown on drg .

Taking down/out old lock cover and Supply and fixing new lock cover made of 16 gauge 1mm MS sheet complete all as specified and as shown on drg . Make of MS Sheet -Tata/Surya/Jindal/Prakash,

Repair to door like replacement of hings make easing as directed by Engr-in-charge.

Taking down /out old worn out legs and Supply and fixing of legs made of 18 gauge of MS sheet complete all as specified and as shown on drg .Make of MS Sheet - Tata/Surya/Jindal/Prakash,

Taking down/out old unserviceable shelves and Supply and fixing new shelves made of MS plain sheet 1mm thick complete all as specified and as shown on drg .Make of MS Sheet -Tata/Surya/Jindal/Prakash,

Removal of denting for the deshaped portion of almirah large steel , cleaning of rusted surfaces with & including parts/ item repaired/replaced under item No 1.03 to 1.07 above including preparation of patches by applying putty etc and applying two coats of paint AD grey/Olive green/off white synthetic enamel paint on the internal and external surfaces by spray gun over a coat of red oxide primer complete all as specified and as shown on drg.Make of Paint - Asian/Burger/Nerocle

ALMIRAH STEEL MEDIUM WITH SHELF (FD-1032 , 243 & FD-350)

Taking down/out old unserviceable handle and Supply and fixing new chromium plate handle 100 mm long complete all as specified and as shown on drg

Taking down/out old unserviceable lock and Supply and fixing new brass lock godrej pattern 6 lever complete all as specified and as shown on drg .

Taking down old shelves MS clamp incl removal of denting for the deshaped portion, welding etc as required and refixing in the same position complete all as specified and as shown on drg

Taking down/out old lock cover and Supply and fixing new lock cover made of 16 gauge 1mm MS sheet complete all as specified and as shown on drg . Make of MS Sheet -Tata/Surya/Jindal/Prakash,

Repair to door like replacement of hings make easing as directed by Engr-in-charge.

Taking down /out old worn out legs and Supply and fixing of legs made of 18 gauge of MS sheet complete all as specified and as shown on drg .Make of MS Sheet - Tata/Surya/Jindal/Prakash,

Taking down/out old unserviceable shelves and Supply and fixing new shelves made of MS plain sheet 1mm thick complete all as specified and as shown on drg .Make of MS Sheet -Tata/Surya/Jindal/Prakash,

Removal of denting for the deshaped portion of almirah steel medium steel , cleaning of rusted surfaces with & including parts/ item repaired/replaced under item No 2.03 to 2.07 above including preparation of patches by applying putty etc and applying two coats of paint AD grey/Olive green/off white synthetic enamel paint on the internal and external surfaces by spray gun over a coat of red oxide primer complete all as specified and as shown on drg.Make of Paint - Asian/Burger/Nerocle

LOCKER BED SIDE STEEL (FD-257/1029)

Taking down old conduit pipe and Supply and fixing new chromium conduit pipe 20mm dia of shape and size complete all as specified and as shown on drg .

Taking down/out old unserviceable handle and Supply and fixing new chromium plate handle 75 mm long complete all as specified and as shown on drg

Taking down/out old unserviceable lock and Supply and fixing of brass lock godrej pattern 6 lever complete all as specified and as shown on drg .Make of Lock - Lico/RIna/Hettich

Taking down old unserviceable hasp & staple and Supply and fixing new MS hasp and staple ,100mm size complete all as specified and as shown on drg .

Taking down /out old worn out legs and Supply and fixing of legs made of 18 gauge of MS sheet complete all as specified and as shown on drg .Make of MS Sheet - Tata/Surya/Jindal/Prakash

Removal of denting for the deshaped portion of almirah large steel , cleaning of rusted surfaces with & including parts/ item repaired/replaced under item No 3.01 to 3.05 above including preparation of patches by applying putty etc and applying two coats of paint AD grey/Olive green/off white synthetic enamel paint on the internal and external surfaces by spray gun over a coat of red oxide primer complete all as specified and as shown on drg.Make of Paint - Asian/Burger/Nerocle

TABLE OFFICE OFFER'S STEEL/TABLE OFFICE CLK STEEL (FD-1003 & FD-1004)

Taking out old unserviceable top and supply and fixing new top of size 1370x760 made of 18/19 thick rubber wood best quality duly covered with 6mm thick rubber wood beading all around top duly french polished with the reqd gloss steel screw to frame of complete all as specified and as shown on drgs.Make of Board - Century/greenply/Action Tessa

All as per srl item 4.01 above but of size 1680x870mm.

Taking out old unserviceable lock and supply and fixing new brass lock 6 lever, Godrej pattern, after removing the dents of drawers and cup board to make it functional complete all as specified and as shown on drgs.Make of Lock - Lico/RIna/Hettich/Link

Taking out old unserviceable leg and supply and fixing new leg made of 1.5mm thick MS square pipe with size & shape as exists complete all as specified and as shown on drgs.Make of MS pipe - Tata/Surya/Jindal/Prakash,

Taking out old unserviceable centre stifiner made of 1.5mm thick MS square pipe with size & shape as exists complete all as specified and as shown on drgs.Make of MS pipe - Tata/Surya/Jindal/Prakash,

All as per srl item No 4.05 above but side stiffner

Taking down/out old U/S drawer and Supply and fixing new drawer made of 16 gauge 1mm MS sheet with including steelness steel channle complete all as specified and as shown on drg . Make of MS Sheet - Tata/Surya/Jindal/Prakash,

Removal of denting of deshaped portion, de-rusting, cleaning of rusted surfaces including preparation of patches with & including to the parts/items repaired/replaced under item No.4.04 to 4.07 above by applying putty etc and applying two coats of synthetic enamel paint over a coat of red oxide, AD grey/Olive green by spray gun complete all as spceified and as shown on drg.Make of Paint - Asian/Nerocale/Burger

Taking down old unserviceable hard rubber shoe and supply and fixing new hard rubber shoe inside of leg with size & shape as exists complete all as specified and as shown on drgs.

CHAIR CB STEEL WITH ARMS AND W/O ARMS (FD-75M & TP)

M&L welding (Gas/Elect) in repair of tubular leg, with fine finishing and standard workman ship and duly painted with two coat of Olive Green paint over a coat of red oxide primer all as specified and directed by Engineer-in- Charge.

Taking out U/S seat stiffner and S&F new seat stiffner made of 25x6 mm flat iron and 450 to 500mm long including required two holes for screw before 40mm at each end compelete all as specified on drawing as directed by Engineer-in-Charge .

Taking out U/S stiffener and S&F new stiffiner of mild steel round bars 10mm dia and 450 mm long welded between the legs withfine finishing and standard workman ship and duly painted with two coat of Olive Green paint over a coat of red oxide primer all as specified and directed by Engineer-in- Charge.

Same as item No 5.03 but 500 mm long .

Taking out U/S seat and back fram chair CB steel and S&F new seat and back fram made of shisham wood well seasoned free from knots and cracks with permissible moisture contents as per shape and size duly black polished up to required finish. Weaving shall be done with platic cane not less than 0.35mm thick as shown on drg.

Taking down u/s plastic cap from tubular pipe and S&F new plastic cap of approved quality .

Taking down old unserviceable arms rest and S&F new arm rest made of teak wood duly black polish compelte all as directed by Engr -in-charge.

CHAIR WRITING OFFRS (FD/E6/MAP/12)

Taking out U/S arms and S/F new arm rest made of black internal with shin of chair writing with size and shape exists complete all as specified as shown on drg.

Taking down old us hard rubber shoes and S&F new Hard rubber shoes compelete all as specified and shown on drg.

Taking out unservicable cloth and cushion from seat chair writing map and supply and fixing new cushion made out of 50mm thick foam of 40mm density including cutting and stiching finally covering the entire foam with tapersty cloth shade and colour complete all as directed by Engr-in -charge. (Colour of tapestry colth approvd by BSO/GE)

CHAIR VERANDAH (FD-259, 333 & 256)

M&L for cutting U/S cane and welding (Gas /Elect) of frame, 10 mm round bar , legs where as required to make its actual shape and size all as directed by Engineer-in-Charge.

Taking out old U/S rusted legs of chair varandah and S&F new legs made of Conduit pipe 19mm dia 1.6mm thick and 1.35 Mtr duly painted with two coat of enamel paint (white ) over a coat of red oxide primer all as specified and directed by Engr-in-Charge.

M&L cutting and removing U/S cane and preparation of old steel surfaces with sand paper and painting with two coat of synthetic enamel paint (White) Make : Berger/Asian/Shalimar.

Taking out old U/S rubber shoe and S&F new hard rubber shoe of 20 mm dia all as spcified and shown on drg.

Cutting/taking out old unserviceable cane from chair varandah and supplying recanning of chair with white plastic cane 4 mm wide canning as per the Godrej pattern complete all as specified and as shown on drg. make of cane/ :- Shah/Premier brand

TABLE COMPUTER (FD/MAP/II/03)

Taking out U/S top and S/F new top made of 18 mm thick pre lamnated particel board extior grade both side same colour with including pvc beading all around of top all as specified and as shown on drg.

Taking out U/S drawer and S/F new drawer made of 18 mm thick pre lamnated particel board extiror grade both side same colour with including steelness steel channle and all around pvc beading duly completed and all as specified and as shown on drg.

Taking out U/S Key board and S/F Key board tray (450 x 480) made of 18 mm thick pre lamnated particel board extiror grade with pvc beading of around with including steelness steel channel duly completed and all as specified and as shown on drg.

Taking out U/S bottom shelf and S/F bottom shelf made of 18 mm thick pre lamnated particel board extiror grade with oval pvc beading duly completed and all as specified and as shown on drg.

Taking out U/S vertical board and S/F vertical board made of 18 mm thick pre lamnated particel board extiror grade with oval pvc beading duly completed and all as specified and as shown on drg.

Taking out U/S Mouse tray and S/F mouse tray made of 18 mm thick pre lamnated particel board extiror grade with oval pvc beading of around with including steelness steel channel duly completed and all as specified and as shown on drg.

CHAIR COMPUTER (FD/E6/MAP/01)

Taking out U/S up and down lever and S/F new adustable lever with size and shape exists complete all as specified as shown on drg.

Taking out U/S coaster wheel and S/F coaster wheel of twin of computer chair with size and shape exists complete all as specified as shown on drg.

Taking out U/S hand rest and S/F new hand rest of twin of revolving chair with size and shape exists complete all as specified as shown on drg.

Taking out unservicable cloth and cushion from seat chair computer and supply and fixing new cushion made out of 50mm thick foam of 40mm density including cutting and stiching finally covering the entire foam with tapersty cloth shade and colour complete all as directed by Engr-in -charge. (Colour of tapestry colth approvd by BSO/GE)

Taking out unservicable cloth and cushion from back chair computer and supply and fixing new cushion made out of 50mm thick foam of 40mm density including cutting and stiching finally covering the entire foam with tapersty cloth shade and colour complete all as directed by Engr-in -charge. (Colour of tapestry colth approvd by BSO/GE) NOTE - (i) Tapesty cloth used shall not be less than Rs. 250.00 per meter.

TABLE BED SIDE (FD/E6/MAP/15®)

Taking out U/S top and S/F Top made of 18 mm thick pre lamnated MDF board side teak colour with alround pvc beading of table Top with all as specified and as shown on drg.

Taking out U/S drawer and S/F drawer made of 18 mm thick pre lamnated MDF board both side teak colour with including steelness steel channle and all as specified and as shown on drg.

Taking out U/S legs and S/F legs of size and shape exists all as complete shown on Drg.

Taking out U/S shutter and S/F shutter made of 18 mm thick pre lamnated MDF board both side teak colour with alround pvc beading of shutter and all as specified and as shown on drg.

Taking down U/S handle and S/F new handle stellness steel shape exists all as complete as specified as showm on Drg.

Takni out U/S rubber shoe and SF rubber shoe size and shape exists all as shown on drg.

TEAPOY VARANDAH (MAP) ( FD/E6/MAP/17)

Taking out U/S top and S/F top made of 18 mm thick pre laminated MDF board both side teak colour with PVC all around PVC beading of top, size and shape as exists and all as complete as shown on drg.

Preparation of surface and two coat of enamal black paint over a coat of red oxide primer complete all as secified and shown on drg.

Takni out U/S rubber shoe and S/F new hard rubber shoe size and shape exists all as shown on drg.

CHAIR VERANDAH (MAP) (FD/MAP-II/06)

M&L welding (Gas/Elect) in repair of leg and stiffiner with fine finishing and and standard workman ship and duly painted with two coat of white paint over a coat of red oxide primer all as specified and directed by Engineer-in- Charge.

Provn of stiffiner for the chair varandah of center seat of chair varandah made of conduit pipe 19mm dia, 1.6mm thick and 35mm long welded of center both side seat and back of chair varadah all as specified and directed by Engr-in-Charge.

Taking out U/S PVC seat and back from chair Varandha and S&F new PVC seat and back of Chair varandha as per shape and size as per drg. Make of PVC - Cello/Amco/Supreme

Preparation of steel surface with & including parts/ items repaired/replaced above item No 7.01 to 7.02 above and applying two coats of synthetic enamel white paint over a coat of red oxide primer complete all as specified and as shown on drgs.Make of Paint - Asian/Nerocale/Burger

Taking out old U/S rubber shoe and S&F new hard rubber shoe of 20 mm dia all as spcified and shown on drg.

TABLE CENTRE GLASS TOP (FD-375)

Supply and fixing in repair of Glass top of size 1200x600x8mm duly mitired all around including removing of old glass all as specified as dryg all as directed. Make of Glass - Modi Guard / Atul / Saint Globin

Taking out U/S rubber shoe and S/F new hard rubber shoe size and shape exists all as shown on drg.

CHAIR REVOLVING (TP)

Taking out U/S up and down lever and S/F adustable lever with size and shape exists complete all as specified as shown on drg.

Taking out U/S coaster wheel and S/Fcoaster wheel of twin ofrevolving chair with size and shape exists complete all as specified as shown on drg.

Taking out U/S hand rest and S/F hand rest of twin of revolving chair with size and shape exists complete all as specified as shown on drg.

Taking out U/S seat back and S/F seat back of revolving chair with size and shape exists complete all as specified as shown on drg.

Taking out U/S seat and S/F seat of revolving chair with size and shape exists complete all as specified as shown on drg. NOTE - (i) Tapesty cloth used shall not be less than Rs. 500.00 per meter.

RACK STEEL 6 TIER FD-106M & FD-1038

Taking out old unserviceable shelves and Supply and fixing new shelves made of 20 gauge MS sheet exists and applying two coats of syntetic enamel paint white over a coat of red oxide primer with size and shape as exists complete all as specified and as shown on drgs.

Taking down old unserviceable leg and supply and fixing new leg made of angle iron with size and shape as complete all as specified and as shown on drgs.

Removal of denting of deshaped portion, derusting and cleaning of rusted surfaces by Sand paper with & including parts/items repaired/replaced under item No 6(a) to 6(b) above and applying two coats of white synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drgs.

STOOL STEEL 305X305X510 MM (FD-81(M), FD-1026)

M&L denting of deshaped portion, derusting, cleaning of rusted surfaces including preparation of patches by applying putty etc and a coat of red oxide primer wherever required and applying two coats of olive green synthetic enamel paint by spray gun on internal & external surfaces complete all as specified and directed by Engineer-in-charge

Taking out old rusted legs and S&F new legs made of 16 gauge MS sheet complete as per drg and as directed.

Taking out old rusted stiffeners and S&F new stiffeners made of 16 gauge MS sheet complete as per drg and as directed.

Taking out old unserviceable top rail and S&F new top rail made of 16 gauge MS sheet size and shape as per drg.

Taking out old unserviceable top and S&F new top 16 gauge MS sheet size and shape as per drg.

Rack Shoe Steel (FD/E6/MAP/02)

Preparation of surface and two coat of enamal black paint over a coat of red oxide primer complete all as secified and shown on drg.

Taking out old unserviceable legs and S&F new legs made of 19mm dia 18 gauge MS Pipe complete as per dg and as directed

Taking out old unserviceable shelves of size 300mm x 700mm and S&F of new shelves made out of 25mm dia 18 gauge MS Pipe frame and 3mm dia MS Rods duly welded complete as per drg and as directed.

Charpoy IP HARD TOP (FD/MAP-II/01)

Taking down U/S ply top and S/F new ply top made of 12 mm thick comercial BWR ply Make Green ply/century/Kit ply all as shown on Drg.

Taking out U/S rubber shoe and S/F new hard rubber shoe size and shape exists all as shown on drg.

Preparation of surface with sand paper after scrubbing and applying two coats of brown/black/off white/gray colour synthetic enamal paint over a coat of red oxide primer on steel surface of bed hard to match by spray gun paint with the existing complete all as specificed and as shown on drgs.Make of Paint - Asian/Nerocale/Burger

Chapoy MS PIPE ORs (FD-77)

Taking down U/S ply top and S/F new ply top made of 12 mm thick comercial BWR ply Make Green ply/century/Kit ply all as shown on Drg.

Taking out U/S rubber shoe and S/F new hard rubber shoe size and shape exists all as shown on drg.

Preparation of surface with sand paper after scrubbing and applying two coats of brown/black/off white/gray colour synthetic enamal paint over a coat of red oxide primer on steel surface of bed hard to match by spray gun paint with the existing complete all as specificed and as shown on drgs.Make of Paint - Asian/Nerocale/Burger

BED HARD STEEL OFFRs FD/E6/MAP/08 ( R)

Taking down U/S ply top and S/F ply top made of 12 mm thick commercial BWR ply with fixing suitable nut and bolts all as shown on drg. Make of ply - Green ply/century/Kit ply

Taknig out U/S head board and S/F new head board made of 18 mm thick pre laminated MDF board booth side teak colour with fixed screwd size and shape exists all as shown on drg.Make of Board - Century/greenply/Action Tessa

Takni out U/S foot board and S/F new foot board made of 18 mm thick pre laminated MDF board both side teak colour with fixed screwd size and shape exists all as shown on drg. Make of Board - Century/greenply/Action Tessa

Takni out U/S rubber shoe and S/F new rubber shoe size and shape exists all as shown on drg.

Preparation of surface with sand paper after scrubbing and applying two coats of brown/black/off white/gray colour synthetic enamal paint over a coat of red oxide primer on steel surface of bed hard to match by spray gun paint with the existing complete all as specificed and as shown on drgs. Make of Paint - Asian/Nerocale/Burger

CHARPOY GI PIPE PLYTOP (FD-220)

Removing of unservicable charpoy top and S&F of plywood 12mm thick BWR grade ISI marks of size 1980x900mm with nut and bolts fix 75mm long, all as per direction.

S&F 3 Nos of flat iron stiffiner of size 900x25x5mm thickness including welding and fixing . The siffiner shall be painted with two coats of black enamal paint. Make of paint- Asian/Burger/Shalimer

S&F of Long rail made of 32mm dia of GI pipe of length 1980mm medium grade ISI marked duly threading both side ends. Make of pipe- Bansal/Jindal/Tata

S&F of Short rail of length 900mm made out of long rail obtained from Sr no 21.03 above duly cutting and threading of both ends.

Leg of length 440mm made out of long rail /short rail obtained from sr no 21.03 and 21.04 above duly cutting and threading one ends and bottom ends fixing of iron plat.

Taking out old unserviceable check nut and supply and fixing new check nuts all as specified and as shown on drgs.

Taking out old unserviceable elbow and supply and fixing new GI elbow 3 way 32mm ISI marks all as specified and as shown on drgs.

TABLE DINING ORs (FD-165)

Taking out old unserviceable top and supply and fixing new top made of 19 thick plywood BWR duly cover with 22mm gauge aluminium sheet of alround of top with fixed steel screw to frame of complete all as specified and as shown on drgs.Make of ply- Century/greenply/Action Tessa

M&L welding (Gas/Elect) in repair of leg, and stiffiner with fine finishing and and standard workman ship and duly painted with two coat of black paint over a coat of red oxide primer all as specified and directed.

Preparation of surface and two coat of enamal black paint over a coat of red oxide primer complete all as secified and shown on drg.

Takni out U/S rubber shoe and S/F new hard rubber shoe size and shape exists all as shown on drg.

Removing Dents and Bends and welding wherever required Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray. Preparation of surfaces after applying putty to cover uneven surfaces, apply a coat of red oxide primer and spray painting with two coats of synthetic enamel paint . Colour :- as directed by Engg-in-Charge .Make for paint:- Asian/Berger/Nerolac Note :- as a whole shall be measured as single unit.

(a) Alimirah steel large with Shelves (FD-351)

(b) Almirah steel medium with shelves (FD-350)

(c) Locker Bed side steel (FD-257, FD-1029, CE/SK/619)

(d) Book Case Steel (FD-1028)

(e) Rack Steel Adjustable(FD-69, FD-129, FD-1003 &FD-1023, )

Please Enable Macros to View BoQ information