GE/863/EWS-T-79 OF 2025-26 REPAIR AND REPLACEMENT OF CERTAIN B

Amount

Dismantling floor hearth and wall tiles including cement mortar bedding (but not backing) and removing from site complete all as directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm gradded stone aggreggate as in levelling course of flooring complete all as specified and directed.

M&L for Vitrified tiles Light shade of 10mm thick (square/Rectangular), polished area of each tiles n.exc 0.36 Sqm as in floor etc sat and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick cement screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

All as per Item No 3 above but as in skirting/dados over and including 10mm thick rendering in CM 1:4 complete all as directed.

M&L for nonskid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors , set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

Dismantling fibre sheet in roof covering all as specified.

S&F 2mm thick fibre glass reinforced translucent plain/corrugated sheeting with two corrugations side lap fixed with screw complete all as specified.

Dismantling wall and ceiling boards of any description or any thickness including cover fillets complete all as directed.

S&F powder coated GI snap grid of size 605 X 605mm frame work for false ceiling including hangers 2mm dia G.I. (upto 1200mm length) adjusting level fixed to steel member/purlins hangers or roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long whereever required or tie on structural steel complete all as specified and directed.

S&F Exposed metal frame ceiling with 8mm thick decorative laminated calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid (frame work for ceiling shall be measured and paid seprately) complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and directed

S&F Hollow PVC Wall Lining consisting of 5mm thick Wood Grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and directed

Hacking out old broken glass (any thickness size quality or description) from Wdn or steel frames glazed with putty or fixed with beads, complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares area not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Taking down shutter of any description exc 2 sqm each

S&F 2nd class hard wood 35 mm thick plain, framed, panelled shutters(any no of panels) with panels of timber flat on both sides (feather edge) or of veneered partical boaed medium density, wood pertical board with commercial face veneers; supply and fix two chowkats complete all as specified.

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 100mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed.

S&F 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as spd and directed.

Dismentaling water tanks and removing to store exc 250 and n.exc 500 ltrs complete all as specified and directed.

Dismantaling water tanks and removing to store exc 500 but n. exc 1000 ltrs complete all as specified and directed.

S & F 500 ltr capcity rotational moulded polyethylne water storage tanks(cylindrical vertical with closed top) duly provided with necessay fittings/fixtures for connecting inlet, outlet, washout and overflow pipes, noisted incl ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule 20 mm bore and fixed in position complete all as specified and directed.

All as per item No 24 above but 1000ltr capacity complete all as directed.

S&F in repair 2000 Ltrs capacity, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I, including 20mm ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20 mm bore steel tube and dismantling existing water tank and removing complete all as specified.

S&F in repairs ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore pipe complete all as specified.

S&F in repairs ball brass valves, high pressure, with polythene float and fly nut complete screwed for 15mm bore pipe complete all as specified.

S&F in repairs 19/20 mm dia curtain rails mild steel chromium plated with fixing brackets, stops, roller etc, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

S&F rolled mild steel Fe -290(Gde E-165) for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as specified.

S&F Mild steel work as in compound girders and stanchions, latticegirders, aerial masts, staging for water tanks and like including caps bases, splices etc built up from two or more beam or channel sections or angles with plates or pipe section including all lattice bars, stiffeners, gusset plates etc..(Fe-410-W(Gde E-250)Quality-A) complete all as specified.

M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling plain or corrugated steel sheeting (Roof covering) of any description or any gauge or thickness complete all as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering with self tapping screws complete all as sepcified and as directed

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering with self tapping screwsas in ridge complete all as sepcified and as directed

Taking up or down 15 mm bore GI tubing and connection including cleaning for refixing or removal complete all as specified and as directed.

Taking up or down 20 mm bore GI tubing and connection including cleaning for refixing or removal complete all as specified and as directed.

Refixing old steel tubing and connection 15 mm bore in new or old position in wall, ceiling and floor etc complete all as directed.

Refixing old steel tubing and connection 20 mm bore in new or old position in wall, ceiling and floor etc complete all as directed.

S&F 15mm medium grade GI steel tubing including all fittings and fixed complete to wall ,ceiling and laid in floor etc all as directed.

S&F 20mm medium grade GI steel tubing including all fittings and fixed complete to wall ,ceiling and laid in floor etc all as directed.

S&F in repairs 15 mm dia stop cock of cast copper alloy but fancy type chromium plated screwed down high presser with crutch or butter fly handle on both ends for iron pipe or for union fixed complete all as directed.

S&F in repairs 15 mm bore bib taps, cast copper alloy, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S&F in repairs 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms), Complete all as specified and directed

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in replacement brass CP mixer tap 15 mm bore, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot or cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover and jet spray cp, flush pipe incl all joints complete

S & F in repairs Chromium plated health faucet (hand spray) with 1mtr long PVC flexiable pipe 15mm bore and fixed to in position etc complete all as specified and directed.

S&F in repair vitreous china squatting pan `Orissa’ pattern, size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with ‘P’ or ‘S’ trap including provision of lime concrete bedding complete all specified and directed.

Supply only 10 ltr capacity PVC valve less symphonic action type flushing cistern, white ,with inlet ball valve, float and handle including bracket and 32 mm dia HDPE flush pipe and connected to squat pattern /pedestal pattern water closet (Flush shall be fixed at suitable height for smooth functioning ) complete all specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern, white ,with inlet ball valve, float and handle including bracket and 32 mm dia HDPE flush pipe and connected to squat pattern /pedestal pattern water closet (Flush shall be fixed at suitable height for smooth functioning ) complete all specified and directed.

S&F in repairs sinks with drainage board made of stainless steel of 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl 40 mm PVC waste pipe (Minimum weight 32mm45gms/40mm-60 gms)&40mm PTMT coupling complete all as specified.

S&F in repair PVC connection 15mm bore with PTMT nuts and 450mm long complete all specified and directed.

S&F in repair vitreous china wash hand basin, white flat back size 550x400mm complete including necessary cutting for and pinning in ends of brackets ) including brackets and 750mm long PVC waste pipe 32mm bore & waste coupling 32mm dia of PTMT (half or full threaded) complete all as specified and directed.

S&F in repair aluminum (extuded section) body door closer hydraulically regulated designation No 3 universal type, suitable fo door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg. Complete all as specified and as diected.

Taking down chowkhats with shutters (without taking off shutters from the frame) and removing from site area exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed.

S&FAnodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodiesed aluminium door shutters, aluminium section weighing 0.55 Kg/m incl. necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each doors, hinges, anodiesed aluminium snap beading screw etc. complete all as specified.

S&F 4 mm thick Aluminium composite Panel for door including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. complete all as specified

S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in squares area not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Taking down cement plastering at any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed.

M&L for 15mm thick rendering in CM (1:4) on external surfaces of brick work or concrete surface finished fair and even , complete all as specified and directed.

M&L for 10mm thick rendering in CM (1:6) on internal surfaces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over 2 mm thick wall care putty on walls, complete all as specified and directed.

M&L for complete removal of existing treatment from internal walls surface by "Electrically Operated Dry Wall Sanding Machine", making the surface smooth by removing undulation (Nails, Screws if any to be removed properly before sanding) and prepare the surface to receive new finish complete all as specified and directed.

M&L for 2 to 3mm thick Birla/ JK or similar type of interior wall putty to wall surface by using "Electrically Operated Airless Wall Putty Spray Machine" smoothen the surface using sand paper etc (Note: Cracks of walls to be filled with its crack fill paste make Berger or equivalent) complete all as specified and directed.

M&L for applying one coat of H.S Seat-O-Prime XP advanced acrylic primer Make Berger or equivalent over putty surface using "Electrically Operated Spray Machine" complete all as specified and directed.

M&L for two coats of acrylic emulsion paint over primered surface of wall using "Electrically Operated Spray Machine" all as specified and as directed

Schedule of Credit

Pankaj Builders (BID ID -3521125)

chankaya solutions (BID ID -3514247)