Development of Fisheries Harbour at Harnai Tal. Dapoli Dist. Ratnagiri.

Amount

Providing Infrastructural Post Harvesting Facilities to Fishermen at Fisheries Harbour Harnai, Tal-Dapoli, Dist-Ratnagiri

Item No : 1 Supplying and laying trap stones upto 20 kilogram for for Filter / Core layer including conveying with all the leads, lifts, laying in required lines, level, slope as per drawing including necessary equipments and machinery as directed by, excetra complete in tidal conditions. - Breakwate, Quay, Revetment and Sloping Hard

Item No : 2 Supplying and laying trap stone weighing 50 to 100 kilogram for Breakwate, Quay, Revetment and Sloping Hard Core / Sub armour / Armour layer including conveying with all the leads, lifts, laying in required lines, level, slope as per drawing including necessary equipments and machinery as directed by, excetra complete in tidal conditions - Breakwate, Quay, Revetment and Sloping Hard

Item No: 3 Providing and laying trap stones weighing 100 to 200 kilogram for Core / Sub armour / Armour layer including conveying with all the leads, lifts, laying in required lines, level, slope as per drawing including necessary equipments and machinery as directed by, excetra complete in tidal conditions. - Breakwater

Item No: 4 Providing and laying trap stones weighing 300 to 500 kilogram for Sub armour / Apron / Armour layer including conveying with all the leads, lifts, laying in required lines, level, slope as per drawing including necessary equipments and machinery as directed by, excetra complete in tidal conditions. - Breakwater

Item No: 5 Providing and laying trap stones weighing 500 to 1000 kilogram for Apron / Armour layer including conveying with all the leads, lifts, laying in required lines, level, slope as per drawing including necessary equipments and machinery as directed by, excetra complete in tidal conditions - Breakwater

Item No: 6 Providing and laying trap stones weighing above 1000 kilogram for Apron / Armour layer including conveying with all the leads, lifts, laying in required lines, level, slope as per drawing including necessary equipments and machinery as directed by, excetra complete in tidal conditions. - Breakwater

Item No: 7 Providing and laying precast tetrapods / blocks of plain cement concrete of M-30 grade, weighing 2000 kilogram each of required shape for armour layer including necessary steel formwork/mould including applying form releasing agent including vibration, curing, conveying and placing them in correct profile as per drawing including all labours, materials, equipments, machinery such as crane of adequate capacity and boom length, with all lead and lift, excetra complete in tidal conditions. - Breakwater

Item No: 8 Providing and laying precast tetrapods / blocks of plain cement concrete of M-30 grade, weighing 4000 kilogram each of required shape for armour layer including necessary steel formwork/mould including applying form releasing agent including vibration, curing, conveying and placing them in correct profile as per drawing including all labours, materials, equipments, machinery such as crane of adequate capacity and boom length, with all lead and lift, excetra complete in tidal conditions. - Breakwater

Item No: 9 Providing and laying precast tetrapods / blocks of plain cement concrete of M-30 grade, weighing 6000 kilogram each of required shape for armour layer including necessary steel formwork/mould including applying form releasing agent including vibration, curing, conveying and placing them in correct profile as per drawing including all labours, materials, equipments, machinery such as crane of adequate capacity and boom length, with all lead and lift, excetra complete in tidal conditions. - Breakwater

Item No: 10 Providing and laying precast tetrapods/blocks of plain cement concrete of M-30 grade,weighing 8000 kilogram each of required shape for armour layer including necessary steel formwork/mould including applying form releasing agent including vibration curing conveying and placing them in correct profile as per drawing including all labours materials equipments machinery such as crane of adequate capacity and boom length with all lead and lifts in tidal condition. - Breakwater

Item No: 11 Providing and laying of reinforced cement concrete in M-30 grade approach slab including reinforcement and formwork complete with fully automatic micro processor Programmable Logic Control with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer / concrete batch mix plant (pan mixer) as per drawings and technical specifications excetra complete with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) (using ARTIFICIAL SAND). - Breakwater

Item No: 12 Providing and laying cast in situ / ready mix M-40 reinforced cement concrete for 600 milimetre diameter bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement, compaction of concrete and withdrawal of steel shell with fully automatic micro processor based Programmable Logic Control with Supervisory Control and Data Acquisition enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) excetra complete.with fine agreegates of required specifications natural sand /VSI quality artificial sand finely washed. (using ARTIFICIAL SAND). (Depth 0 metre to 5 metre) - Quay

12A) Depth 0 to 5m

12B) Depth 5 to 10m

12C) Depth 10 to 15m

Item No: 13 Empty boring for 525 milimetre to 600 milimetre diameter bored reinforced cement concrete cast in situ piles including withdrawal of shell, removal of earth to a distance of 50 metre, excetra complete.

Item No: 14 Chiselling through pile shells in hard strata like boulders, soft and hard rocks Beyond 550 milimetre and upto and inclusive of 750 milimetre diameter including removing and stacking the loose materials, excetra complete and disposing of the unserviceable materials outside, excetra complete. - Quay

Item No: 15 Providing bentonite slurry process for various diameter of piles. - Quay

Item No: 16 Chipping and dressing of the reinforced cement concrete piles upto 0.6 metre including cleaning reinforcement and removal of dismentled materials,upto a distance of 50 metre beyond the building, area excetra for providing pile caps. - Quay

Item No: 17 Carrying out load test for 1.5 times the proposed safe working load on the pile in driven position above 550 milimetre and upto 650 milimetre diameter including construction of test cap, use of accessories and instruments including providing graphs as per Indian Standard code or standard specifications and dismantling the test cap after testing and cleaning the site complete. - Quay

Item No: 18 Providing placing and driving in position 6 millimetre mild steel liner for reinforced cement concrete piles upto required depth with 12 milimetre thick mild steel cutting edge of 0.50 metre length at bottom including fabricating, cutting the mild steel sheet to required diameter and shape, welding the joints and driving with the help of required machineries including all materials, labours and lifts, excetra complete as directed by the Engineer in-charge. - Upto 3.00 metre deep liner. - Quay

Item No: 19 Providing placing and driving in position 6 millimetre mild steel liner for reinforced cement concrete piles upto required depth with 12 milimetre thick mild steel cutting edge of 0.50 metre length at bottom including fabricating, cutting the mild steel sheet to required diameter and shape, welding the joints and driving with the help of required machineries including all materials, labours and lifts, excetra complete as directed by the Engineer in-charge. - From 3.00 metre to 9.50 metre deep liner. - Quay

Item No: 20 Providing and laying cast in situ / Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks,laying / pumping, compaction and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (using ARTIFICIAL SAND). - Quay

Item No: 21 Providing and laying cast in situ / Ready Mix cement concrete M-40 of trap/ granite / quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks,aying/pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, excetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc (using ARTIFICIAL SAND). - Quay

Item No: 22 Providing and fixing in position high corrosion resistant marine / corrosion resistant steel bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, excetra as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed. Includes 10% Tidal Conditions - Quay

Item No: 23 Providing expansion joints in reinforced cement concrete framed structure (at floor level) with premoulded filler 25 milimetre thick and 3 milimetre thick aluminium plate as required, bitumen poured filler and fixing teak wood battens on rear faces, excetra complete as directed. - Quay

Item No: 24 Providing vent holes 100 milimetre diameter galvanised iron pipe in the slab and wearing course with iron grill at the top and galvanised iron pipe at bottom as per drawing, excetra complete. - Quay

Item No: 25 Providing and laying cement concrete wearing coat M-30 grade with batch mix type / concrete mixer with Supervisory Control and Data Acquisition including reinforcement as per drawing and technical specifications excetra complete with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) (using ARTIFICIAL SAND). - Quay

Item No: 26 Providing and fixing stainless steel bollard of steel pipe 1.00 metre long of 250 milimetre inner diameter and circular top plate of 350 milimetre diameter with 5 milimetre thickness on deck of jetty in cement concrete including necessary fixtures and fastening, excetra complete. (Stainless steel of grade S-304) - Quay, Retaining Wall

Item No: 27 Providing and fixing stainless steel mooring ring in cement concrete on deck of jetty consist of 32 milimetre thick steel bar, 225 milimetre inner diameter, steel ring with 75 milimetre inner diameter steel hook of 32 milimetre diameter as per approved drawing, excetra complete. (Stainless steel of grade S-304) - Quay, Retaining Wall

Item No: 28 Providing and fixing fenders made from used tyres including fixing by stainless steel chain links of 8mm diameter and anchor bolts of 16 milimetre diameter, excetra complete as per drawing and as directed under tidal range. - Quay, Retaining Wall

Item No: 29 Supplying and spreading geofabric filter layer of geotextile of polypropylene multifilament woven to the line, level and grade with pore size less than 0.075 milimetre and permeability greater than 9.0 litre / square metre / second confirming specification IS:1969 and ASTM standard including conveying to the site, joining and stitching with proper overlap and laying at excavated surface in tidal condition as directed by Engineer- in- Charge, excetra complete - Quay, Revetment, Sloping Hard

Item No: 30 Supplying and laying trap stone weighing 20 to 50 kilogram for Core / Sub armour layer including conveying with all the leads, lifts, laying in required lines, level, slope as per drawing including necessary equipments and machinery as directed by, excetra complete in tidal conditions. - Quay, Sloping Hard

Item No: 31 Excavation / Dredging in soft strata such as wet soils, slush, sand or silt by mechanical means including use of centrifugal pump for removal of water or by any other approved method, stacking / dispossing off the removed stuff as directed with a lead of 1.00 km lead and all lifts etc. complete. (in tidal condition) - Dredging

Item No: 32 Removing carefully submarine rock (Boulder) below low tide by means of machinery Pocklain or rock breaker and conveying materials above high tide level and desposing off the stuff for protection of the shore as directed with all leads and lifts etc. complete under tidal condition. - Dredging

Item No: 33 Providing earth work in embankment with approved materals obtained from departmental land upto lead of 50 metres including all lifts, laying in layers of 20 centimetre to 30 centimetre thickness, breaking clods, dressing to the required lines, curves, grade and section, watering and compaction with vibratory roller to achive not less than 97 percent of standard proctor density, excetra complete. (Material obtained from departmental Land) Dredginng Material - Reclamation

Item No: 34 Providing earth work in embankment with approved materials obtained from other sources upto lead of 50 metres including all lifts, laying in layers of 20 centimetre to 30 centimetre thickness, breaking clods, dressing to the required lines, curves, grade and section, watering and compaction with vibratory roller with V-Sat attachment to achive not less than 97 percent of standard proctor density, excetra complete. (Material obtained from Other sources) - Reclamation

Item No: 35 Spreading hard murum/ soft murrum/ gravel or kankar for side width complete - Reclamation

Item No: 36 Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. - Reclamation

Item No: 37 Providing and laying in situ / ready mix M-30 cement concrete of trap / granite / quartzite / gneiss metal for cast in citu reinforced cement concrete solid piers, columns, excetra including provision of "V" shaped false joints to form suitable panels on the faces of approved design with compacting by vibrating and curing complete, including plywood / steel formwork, centering (excluding dewatering by means of pump) and including bailling out water and including finishing in cement mortar 1:3, curing complete.(With Concrete Mixer) With fine agreegates of required specifications (Natural sand / VSI sand finely washed excetra). (using ARTIFICIAL SAND). - Revetment

Item No: 38 Providing and fixing in position high corrosion resistant marine / corrosion resistant steel bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, excetra as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed. - Revetment , Retaining Wall, Sloping Hard

Item No: 39 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. - (Lift upto 1.5 metre) By Mechanical Means includes 10% for Tidal Condition- Retaining Wall

Item No: 40 Excavation for foundation in earth, soil of all types, sand, graval and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. By Mechanical Means includes 10% for Tidal Condition - Retaining Wall

Item No: 41 Providing dry trap/ granite/ quartzite/ gneiss rubble stone soiling 15 centimetre to 20 centimetre thick including hand packing and compacting, excetra complete. - Retaining Wall

Item No: 42 Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for bed blocks, foundation blocks and such other items including bailling out water, plywood / steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing, excetra complete. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, excetra (Wooden centering will not be allowed.)with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (using ARTIFICIAL SAND). . - Retaining Wall

Item No: 43 Providing and laying in situ / ready mix M-30 plain cement concrete of trap / granite / quartzite / gneiss metal for cast in citu piers, abutment, returns, wings, excetra including provision of "V" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood / steel form work, centering (excluding dewatering by means of pump) and including bailling out water and curing finishing in cement mortar 1:3 excetra complete, as directed by engineer in charge. (With Concrete Mixer) With fine agreegates of required specifications (Natural sand / VSI sand finely washed excetra) (using ARTIFICIAL SAND). - Retaining Wall

Item No: 44 Providing and laying in situ / ready mix M-30 cement concrete of trap / granite / quartzite / gneiss metal for cast in citu reinforced cement concrete solid piers, columns, excetra including provision of "V" shaped false joints to form suitable panels on the faces of approved design with compacting by vibrating and curing complete, including plywood / steel formwork, centering (excluding dewatering by means of pump) and including bailling out water and including finishing in cement mortar 1:3, curing complete.(With Concrete Mixer) With fine agreegates of required specifications (Natural sand / VSI sand finely washed excetra). (using ARTIFICIAL SAND). - Retaining Wall

Item No: 45 Providing and laying weep holes of 100 milimetre diameter asbestos cement / polyvinyl chloride pipes as per drawing for abutment, returns, return walls, excetra complete. - Retaining Wall

Item No: 46 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. - (Lift upto 1.5 metre) By Mechanical Means - Sloping Hard, Beach Landing

Item No: 47 Excavation for foundation in earth, soil of all types, sand, graval and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. By Mechanical Means - Beach Landing

Item No: 48 Supplying, filling, spreading and leveling gravels of size range 5 milimetre to 10 milimetre, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads and lifts, all complete as per direction of Engineer-incharge. - Sloping Hard

Item No: 49 Compacting the sub grade/gravel/oversize metal (200 milimetre loose) layers for all width with Vibratory roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. - Sloping Hard

Item No: 50 Providing and laying of reinforced cement concrete in M-30 grade approach slab / Rigid Pavement including formwork complete with fully automatic micro processor based Programmable Logic Control with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer / concrete batch mix plant (pan mixer) as per drawings and technical specifications excetra complete with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc) excluding reinforcement ) (using ARTIFICIAL SAND). - Sloping Hard

Item No: 51 Providing and filling in the foundation with sand of approved quality including watering, compacting, excetra complete. - Beach Landing

Item No : 52 Empty boring for 425 milimetre to 500 milimetre diameter bored reinforced cement concrete cast in situ piles including withdrawal of shell, removal of earth to a distance of 50 metre, excetra complete. Auction Hall, Admin Building, Radio Communication Center

Item No : 53 Providing placing and driving in position 6 millimetre mild steel liner for reinforced cement concrete piles upto required depth with 12 milimetre thick mild steel cutting edge of 0.50 metre length at bottom including fabricating, cutting the mild steel sheet to required diameter and shape, welding the joints and driving with the help of required machineries including all materials, labours and lifts, excetra complete as directed by the Engineer in-charge. - Upto 3.00 metre deep liner.Auction Hall, Admin Building, Radio Communication Center

Item No : 54 Providing placing and driving in position 6 millimetre mild steel liner for reinforced cement concrete piles upto required depth with 12 milimetre thick mild steel cutting edge of 0.50 metre length at bottom including fabricating, cutting the mild steel sheet to required diameter and shape, welding the joints and driving with the help of required machineries including all materials, labours and lifts, excetra complete as directed by the Engineer in-charge. - From 3.00 metre to 9.50 metre deep liner. Auction Hall, Admin Building, Radio Communication Center

Item No : 55 Providing and laying cast in situ / ready mix M-30 reinforced cement concrete for 450 milimetre diameter each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement, compaction of concrete and withdrawal of steel shell with fully automatic micro processor based Programmable Logic Control with Supervisory Control and Data Acquisition enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) excetra complete.with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) (using ARTIFICIAL SAND).Auction Hall, Admin Building, Radio Communication Center

Item No : 56 Chipping and dressing of the reinforced cement concrete piles upto 0.6 metre including cleaning reinforcement and removal of dismentled materials,upto a distance of 50 metre beyond the building, area excetra for providing pile caps.Auction Hall, Admin Building, Radio Communication Center

Item No : 57 Carrying out load test for 1.5 times the proposed safe working load on the pile in driven position above 400 milimetre and upto 550 milimetre diameter including construction of test cap, use of accessories and instruments including providing graphs as per Indian Standard code or standard specifications and dismantling the test cap after testing and cleaning the site complete.Auction Hall, Admin Building, Radio Communication Center

Item No : 58 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. - (Lift upto 1.5 metre) By Mechanical Means

Item No : 59 Excavation for foundation in earth, soil of all types, sand, graval and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. By Mechanical Means

Item No : 60 Providing dry trap/ granite/ quartzite/ gneiss rubble stone soiling 15 centimetre to 20 centimetre thick including hand packing and compacting, excetra complete.

Item No : 61 Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for bed blocks, foundation blocks and such other items including bailling out water, plywood / steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing, excetra complete. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, excetra (Wooden centering will not be allowed.)with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (using ARTIFICIAL SAND).

Item No : 62 Providing and laying cast in situ / Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks,laying/pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, excetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand /Crushed sand VSI Grade finely washed etc) (using ARTIFICIAL SAND).- Auction Halls

Item No : 63 Providing and filling in the foundation with sand of approved quality including watering, compacting, excetra complete.

Item No : 64 Filling in plinth and floors with approved excavated materials in 15 centimetre to 20 centimetre layers including watering and compacting, excetra complete.

Item No : 65 Providing and laying in situ M-25 cement concrete of trap / granite / quartzite / gneiss metal with 15 percent plum of trap stones for retaining walls and jetty, excetra including necessary formwork, compacting, curing, bailing out water manually in tidal range, excetra complete.

Item No : 66 Providing and laying Cast in situ / Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions, excetra including bailling out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel), excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. with fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (using ARTIFICIAL SAND).

Item No : 67 Providing and laying cast in situ / Ready Mix cement conrete M-30 of trap metal for reinforced cement concrete columns as per detailed designs and drawing or as directed, including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, excetra complete. (Excluding reinforcement). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With natural sand/V.S.I. quality Artificial Sand (using ARTIFICIAL SAND).

Item No : 68 Providing and laying cast in situ / Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (using ARTIFICIAL SAND).

Item No : 69 Providing and laying cast in situ / Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks,laying/pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, excetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand /Crushed sand VSI Grade finely washed etc) (using ARTIFICIAL SAND).- Other than Auction Halls

Item No: 72 Providing and fixing in position high corrosion resistant marine / corrosion resistant steel bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, excetra as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed.

Item No : 71 Providing latrite stone masonry in cement mortar 1:6 in Foundation and plinth including racking out joints where plastering is to be done watering and scaffolding complete.

Item No : 72 Providing latrite stone masonry in cement mortar 1:6 in superstructure including racking out joints where plastering is to be done watering and scaffolding complete.

Item No : 73 Providing internal cement plaster 12 milimetre thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing, excetra complete. (using ARTIFICIAL SAND).

Item No : 74 Providing internal cement plaster 20 milimetre thick in single coat in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing, excetra complete. (using ARTIFICIAL SAND).

Item No : 75 Providing sand faced plaster externally in cement mortar using approved screened sand in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at one killogramme per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment of 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days, scaffolding, excetra complete. (using ARTIFICIAL SAND).

Item No : 76 Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth approved make excetra complete.

Item No : 77 Providing and laying polished Shahabad stone Flooring 25 milimetre to 30 milimetre thick and of required width wide in plain / diamond pattern on a bed of 1:6 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning, excetra complete. (using ARTIFICIAL SAND).

Item No : 78 Providing and laying machine cut machine polished Kotah stone flooring 25 milimetre to 30 milimetre thick in required width in plain / diamond pattern on bed of 1:6 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning, excetra complete. (using ARTIFICIAL SAND).

Item No : 79 Providing and laying machine cut machine polished Kotah stone slabs 20 milimetre to 25 milimetre thick for treads and risers of steps and staircases with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning, excetra complete. (using ARTIFICIAL SAND).

Item No : 80 Providing and laying matt finish ceramic tiles of having sizes 30 centimetre X 30 centimetre and confirming to Indian Standard 15622 : 2006 (Group DII-A) and 7 milimetre to 8 milimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white / colour cement slurry, cleaning, curing, excetra complete. (using ARTIFICIAL SAND).

Item No : 81 Providing and laying ceramic tiles of having sizes 30 centimetre X 30 centimetre and confirming to corrosponding Indian standared for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white / colour cement slurry, cleanding, curing, excetra complete. (using ARTIFICIAL SAND).

Item No : 82 Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 milimetre to 605 milimetre X 590 milimetre to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to Indian Standard 15622-2006 (Group BIa) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. (using ARTIFICIAL SAND).

Item No : 83 Providing and laying vitrified mirror / glossy finish tiles having size 590 milimetre to 605 milimetre X 590 milimetre to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to Indian Standard 15622-2006 (Group BIa) of approved make, shade and pattern for dado and skirting in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. (using ARTIFICIAL SAND).

Item No : 84 Providing and fixing frame with / without ventilator of size as specified with non teak wood for doors and windows including chamfering, rounding, rebating holdfast of size 300 milimetre X 40 milimetre X 5 milimetre with oil painting, excetra complete.

Item No : 85 Providing and fixing M-40 grade thick vibrated pull cast or similar type concrete frame with chamfer confirming to Indian Standard : 6524-1983 having 6 milimetre diameter bars three numbers and stirrups at 250 milimetre center to center and fixing in wall with six numbers of holdfast of 12 milimetre diameter bars 500 milimetre long including primer and oil painting, excetra complete. - Frame size 60 milimetre X 125 milimetre.

Item No : 86 Providing and fixing solid core flush door shutter commercial in single leaf 32 milimetre thick without ventilator commercial type of exterior grade as per detailed drawings, with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting three coats, excetra complete.

Item No : 87 Providing and fixing fibreglass reinforced polyster door shutter 35 milimetre thick as per Indian Standard : 14856 (2000) (reaffirmed-2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, excetra complete.

Item No : 88 Providing and fixing in position (as per Indian Standard : 1868/1982) aluminium sliding window of two tracks with rectangular pipe having overall dimentsions 63.50 milimetre X 38.10 milimetre X 1.02 milimetre at weight 0.547 kilogram per running metre and window frame bottom track section 61.85 milimetre X 31.75 milimetre X 1.20 milimetre at weight 0.695 kilogram per running metre. Top and side track section 61.85 milimetre X 31.75 milimetre X 1.30 milimetre at weight 0.659 kilogram per running metre. The shutter should be of bearing bottom 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre. Interlocking secion 40 milimetre X 18 milimetre X 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre as per detailed drawing and as directed by Engineer in-charge with all necessary aluminium sections, fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass with all required screws and nuts, excetra complete. - With colour anodising with box.

Item No : 89 Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineer in-charge with all necessary aluminium sections including necessary fixtures and fastening such as 5 milimetre thick clear float glass, excetra complete. - Colour anodized.

Item No : 90 Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 milimetre X 38 milimetre X 1.22 milimetre box type, 5 milimetre thick sheet glass louvers of approved quality, excetra complete.

Item No : 91 Providing and fixing aluminium grill 5.13 kilogram per square metre decorative of various sizes as per detailed drawing and specification, excetra complete.

Item No : 92 Providing and applying priming coat on concrete / masonary / asbestos cement / plastered surfaces including scaffolding if necessary, preparing the surface by throughly cleaning oil, grease, dirt and other foreign matters and sand papering as required, excetra comlpete.

Item No : 93 Providing and applying washable oil bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces (excluding the primer coat), excetra complete.

Item No : 94 Providing and applying one coat of seal cement primer of approved manufacture and shade including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding, excetra complete.

Item No : 95 Providing and applying two coats of waterproof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surfaces, watering for two days, excetra complete.

Item No : 96 Providing and applying priming coat over new wood and wood based surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matters, sand papering and knotting, scaffolding, excetra complete.

Item No : 97 Providing and applying two coats of synthetic enamel paint of approved colour to new / old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat), excetra complete.

Item No : 98 Providing and fixing polyvinyl chloride Rain water pipes of 110 milimetre outer and having wall thikness of 2.2 milimetre to 2.7 milimetre confirming to Indian standared 13592-1992 including proper rain water receiving recess with polyvinyl chloride plug, bends, necessary fittings, such as offset shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 milimetre to 40 milimetre from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on cement concrete or masonry blocks, including necessary scaffolding andpolyvinyl chloride maintenance for three years for any leakages or dislocations of pipes. All the fittings and additional two piece socket clips shall be got approved from engineer in charge etc. complete.

Item No : 99 Providing and fixing 15 milimetre diameter screw down bib / stop tap of brass including necessary socket union nut complete.

Item No : 100 Providing and fixing screw down for 20 milimetre diameter wheeled stop tap of brass including necessary sockets / union nut complete.

Item No : 101 Providing and fixing screw down 32 milimetre diameter wheeled stop tap of brass including necessary sockets / union nut complete.

Item No : 102 Providing and fixing Indian Standard : 1729-2002 grade 100 milimetre diameter cast iron soil pipes with lugs including plug bend necessary fittings such as bends, tees, single junction, double junction, slotted vent, offsets on wall or into the ground including filling joints with cement mortar 1:2 proportion fixing on wall by means of galvanised mild steel bracket of 30 X 5 milimetre plate and 8 milimetre square rod with galvanised iron clamp with washer as per design, drawing and as directed to keep pipe 50 milimetre away from wall including necessary scaffolding and painting the exposed faces with one coat of red lead oil paint and two coats of white oil paint including removing the existing pipe if necessary and conveying and stacking in PWD Chowky or as directed by Engineer-in- Charge.

Item No : 103 Providing and fixing European type white glazed earthenware water closet pan with unplasticized poly vinyl chloride seat and lid with chromium plated brass hinges and rubber buffers including unplasticized poly vinyl chloride vent pipe up to the outside face of wall, 10 litre enameled low level flushing cistern with fittings, pipe, stop tap, brackets for fixing cistern, 32 milimetre diameter unplasticized poly vinyl chloride flush pipe with fittings and clamps, 20 milimetre diameter unplasticized poly vinyl chloride overflow pipe, mosquito proof couplings, galvanised iron chain and pulley, with water jet and fitting including cutting and making good to the walls and floors, testing, excetra complete.(prior approval of sample and brand by Ex. Engineer is necessary before use)

Item No : 104 Providing and fixing white glazed earthenware wash hand basin of 63 centimetre X 45 centimetre size including Bib cock stop tap brass heavy 15 milimetre, brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including polyvinyl chloride waste pipe and trap upto the outside face of the wall.

Item No : 105 Providing and fixing 10 centimetre poly vinyl chloride nahani trap with grating, excetra complete.

Item No : 106 Providing and fixing hume pipe septic tank 900 milimetre diameter with vent pipe and cap including excavation and laying.

Item No : 107 Providing and constructing brick masonry inspection chamber 90 centimetre X 45 centimetre X 90 centimetre including 1:4:8 cement concrete foundation, 1:2:4 cement concrete channels, half round glazed stoneware pipes, brick masonary, plastering from inside and cast iron lid cover 75 kilogram with frame fixed in cement concrete, excetra complete. (using ARTIFICIAL SAND).

Item No : 108 Provoding and fixing high density polyethylen container one piece moulded water tank made out of high density polyethylen and built corrugated inclusive of delivery upto destination housing, fixing of accessaries such as inlet, outlet, overflow pipe inclusive of all Taxes - Capacity between 1000 litres to 20000 litres.

Item No : 109 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar 1:3 admixed with approved water proofing compound and finally top finishing with average 20 milimetre thick layers of same mortar added with jute fiber at one kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 milimetre X 300 milimetre, making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test, excetra complete. (using ARTIFICIAL SAND).

Item No : 110 Providing water proof bedding for flooring of bath and water closet 25 milimetre thick in cement mortar 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs. 500/- including ponding test, excetra complete. (using ARTIFICIAL SAND).

Item No : 111 Providing waterproof plaster in water closet and bath 20 milimetre thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of one kilogram per bag of cement of approved make and manufacturer and curing and filling joints of nahani trap and any outlet properly, excetra complete. (using ARTIFICIAL SAND).

Item No : 112 Providing and fixing mild steel grill railing 20 kilogram per square metre with Ghana teak wood hand rail of size 75 milimetre X 60 milimetre and sill of 75 milimetre X 25 milimetre and newel posts for staircases, including fabricating, fixtures, erecting, painting the grill work painting with one coat of anticorrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish.

Item No : 113 Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of reinforced cement concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / burnt brick masonry and or tying by binding wire, excetra complete.

Item No: 114 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 milimetre with lock plate of 3.15 milimetre thickness reinforced with 35 milimetre X 35 milimetre X 5 milimetre angle section fitted with sliding bolts and handles for both sides, deep mild steel channel section of depth and thickness not less than 65 milimetre and 3.15 milimetre respectively with hold fast arrangements, mild steel bracket plate 300 milimetre X 300 milimetre X 3.15 milimetre minimum size and shape with square bar, suspension shaft of minimum 32 milimetre diametre, hood cover of mild steel sheet not less than 0.9 milimetre thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer, excetra complete. (Indian Standard : 6248-1979) - with mechanical gear

Item No : 115 Providing and fixing 450 milimetre X 550 milimetre size superior type belgium mirror with 16 milimetre diameter nickel plated towel rod, excetra complete.

Item No : 116 Providing and fixing chromium plated towel rod 16 milimetre diameter and 75 centimetre in length including all accessories complete.

Item No : 117 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates excetra as per detailed desings and drawings or as directed including cuting, fabricating, hoisting, erecting, fixing in position, making rivetted / bolted / welded connection and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade, excetra complete.

Item No : 118 Providing structural steel work in single stanchions composed of rolled steel joists, channel, excetra with caps, bases, mild steel plates, angle brackets, cleats, gusset plates, anchor bolts, excetra as per detailed desings and drawings or as directed including cutting, fabrication, hoisting, erecting, fixing in position, making rivetted / bolted / welded connection and one coat of anticorosive paint and over it two coats of oil painting of approved quality and shade, excetra complete.

Item No : 119 Providing and fixing of colour coated zincalume (R) AZ 150 (Minimum 150 grams per square metre total on each sides) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 milimetre base metal thickness (BMT) (0.5 milimetre TCT), Hi-strength steel with minium 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55 percent aluminium, 43.4 percent zinc, 1.6 percent silicon) with COLORBOND (R) steel quality super durable polyster paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nominal 950-1050 milimetre effective cover width and nominal 25-30 milimetre deep ribs with subtle square fluting in the five pan at nominal 180-250 milimetre center to centre. The end rib shall be designed for anti capilary groove and return leg. The feed material should have coil manufacturer's product details marked at regular interval. Including fasteners with minium fatened with minium 25 um zinc-tin alloy coated, hex head, self-drilling screw, excetra complete. (Weight of profile 4.52 kilogram per square metre).

Item No : 120 Providing and fixing stainless steel sink 600 milimetre X 510 milimetre X 200 milimetre of approved make including coupling, outlet pipe, elbo and other necessary fitting, finishing excetra complete.

Item No : 121 Providing expansion joints in reinforced cement concrete framed structure (interior column) with plain premoulded filler 25 milimetre thick including fixing teak wood battens on both faces and finishing as directed, excetra complete.

Item No : 122 Providing soak pit of size 120 centimetre X 120 centimetre X 120 centimetre including excavating and filling with brick bats.

Item No : 123 Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed. By Mechanical Means.

Item No : 124 Laying and spreading availabale soil in the sub-grade on a prepared surface, pulverising, mixing the spread soil in place with rotavator with 3 percent slaked lime having minimum content of 70 percent of CaO, grading with motor grader and compacting with the road roller at optimum moisture content to the desired density to form a layer of improved sub grade

Item No : 125 Construction of granular sub-base by providing close graded material, mixing in a mechanical mix plant at optimum moisture content, carraige of mixed material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401. - Plant Mix Method and grading - I material.

Item No :126 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification inciuding spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening / binding material to fill the interstices of coarse aggregate, watering and compacting with Vibratory roller to the required density. - By Mechanical Means - Grading I Using Screening type-A (13.2 milimetre Aggregate)

Item No : 127 Providing and applying tack coat on the prepared surface, heating by flames in boiler and spraying bitumen with sprayer. On concrete surface treated with primer, at the rate of 3.25 killogram per 10 square metre. (Using VG-30 bulk bitumen)

Item No : 128 Proving and laying bituminous macadam using crushed aggregates of grading-I premixed with bituminous binder, transported to site with vehicle tracking system, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 80 / 100 milimetre compacted thickness with 3.3 percent specified Bitumen (Asphalt Grade 60/70). - Using 80 tonnes per hour Batch mix type hot mix plant with Supervisory Control and Data Acquisition, Sensor Paver,vibratory roller. (Using VG-30 bulk bitumen)

Item No : 129 Providing and laying open graded premix surfacing of 20 milimetre thickness composed of 13.2 milimetre to 5.6 milimetre aggregates premixed with bituminous binder transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and seal coat. For Bitumen of specified grade - Using Batch mix type hot mix plant with SCADA, paver and vibratory roller (over black topped surface) (VG-30 bulk bitumen rates are considered to arrive at rates).

Item No : 130 Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foundations including necessary form work, compacting and curring, excetra complete. (with reversible drum type mixer with Supervisory Control and Data Acquisition with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc) (using ARTIFICIAL SAND).

Item No : 131 Providing and laying Cast in situ / Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions, excetra including bailling out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel), excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. with fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (using ARTIFICIAL SAND).

Item No : 132 Providing and laying in situ / ready mix M-20 cement concrete of trap/granite / quartzite /gneiss metal for approach slab / rigid pavement including compacting, finishing, curing excetra complete. (excluding reinforcement) (with reversible drum type mixer/concrete batch mix plant (pan mixer) with Supervisory Control and Data Aquisition with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ),cement 6.40 bags/cumt) (using ARTIFICIAL SAND).

Item No : 133 Providing and fixing in position high corrosion resistant marine / corrosion resistant steel bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, excetra as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed.

Item No : 134 Providing and laying Cast in situ / Ready Mix cement concrete M-15 of trap / granite / quartzite / gneiss metal for bed blocks, foundation blocks and such other items including bailling out water, plywood / steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing, excetra complete. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, excetra (Wooden centering will not be allowed.) with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (using ARTIFICIAL SAND).

Item No : 135 Providing and laying weep holes of 100 milimetre diameter asbestos cement / polyvinyl chloride pipes as per drawing for abutment, returns, return walls, excetra complete.

Item No : 136 Construction of dry lean cement concrete sub-base over a prepared sub-grade with coarse and fine aggregate (V.S.I. grade finely washed crushed sand) conforming to Indian Standard : 383, the size of coarse aggregate not exceeding 25 milimetre, cement content not to be less than 150 kilogram per cubic metre, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant / weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor / by suitable means as approved by Engineer in-charge, compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required, excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete.

Item No : 137 Providing and laying in situ M-40 grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (V.S.I. grade finely washed crushed sand) conforming to Indian Standard : 383, using fine and coarse aggregates combined gradation as per Table 600-3 of Ministry of Road Transport and Highways specification 2013, mixed in a batching and mixing plant / non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver, compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer in-charge and curing by curing compound / by providing cement vata in cement mortar 1:8 at 0.6 metre X 0.6 metre center to centre, admeasuring 80 milimetre at bottom and 40 milimetre at top with depth of 75 milimetre and maintaining the same throughout curing period or by any other method approved by Engineer in-charge, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete.

Item No : 138 Providing and laying 125 micron low density polyethylene sheet confirming to Indian Standard : 3395 - 1997 below concrete pavement including all materials and labour complete.

Item No : 139 Providing and fixing factory made hydraulically pressed mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80 milimetre thick in M-40 grade of approved size and shape for City streets, small / medium market roads, low volume roads, utility cuts on arterial roads, excetra as specified and as per Indian Standard : 15658 - 2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of V.S.I. crushed sand of 50 milimetre thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator, excetra complete.

Item No : 140 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification inciuding spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening / binding material to fill the interstices of coarse aggregate, watering and compacting with Vibratory roller to the required density. - By Mechanical Means - Grading I Using Screening type-A (13.2 milimetre Aggregate)

Item No : 141 Providing dry trap/ granite/ quartzite/ gneiss rubble stone soiling 15 centimetre to 20 centimetre thick including hand packing and compacting, excetra complete.

Item No : 142 Providing & laying Cast in situ / Ready Mix C.C. M-20 of trap / granite / quartzite / gneiss metal for bed blocks, foundation blocks & such other items including bailling out water, plywood / steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven & honeycombed surface & curing, etc. complete. The C.M. 1:3 plaster is considered for rendering uneven & honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, etc. (Wooden centering will not be allowed.)with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade ) (using ARTIFICIAL SAND).

Item No : 143 Providing latrite stone masonry in cement mortar 1:6 in superstructure including racking out joints where plastering is to be done watering and scaffolding complete.

Item No : 144 Providing sand faced plaster externally in cement mortar using approved screened sand in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at one killogramme per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment of 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days, scaffolding, excetra complete. (using ARTIFICIAL SAND).

Item No : 145 Providing and applying one coat of seal cement primer of approved manufacture and shade including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding, excetra complete.

Item No : 146 Providing and applying two coats of waterproof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surfaces, watering for two days, excetra complete.

Item No : 147 Providing and casting in situ / ready mix plain cement concrete M-20 grade of trap metal for coping to head walls / parapet including centering, form work, compaction and curing excetra complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with Supervisory Control and Data Aquisition with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) (using ARTIFICIAL SAND).

Item No : 148 Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on mild steel angles 50 milimetre X 50 milimetre X 6 milimetre at 2.5 metres, center to center including excavating pits for foundation, fixing post in cement concrete 1:4:8 of size 45 centimetre X 45 centimetre X 45 centimetre fastening the wire and painting the mild steel Angles with one coat of red lead primer and two coats of painting, excetra complete. (using ARTIFICIAL SAND).

Item No : 149 Providing and fixing mild steel grill gate with angle iron frame 65 milimetre X 65 milimetre X 10 milimetre with iron bars at 150 milimetre center to center and diagonal flats as per the detailed drawing including hinges, pivot blocks locking arrangement, welding riveting and oil painting of three coats of approved shade. Weight of gate 35 kilogram per square meter.

Over Head Tank

Item No : 150 Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 meters centre to centre distance for ESR having Capacity upto 500 Cum. and not more than 6 m c/c distance for ESRs having capacity above 500 cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 meters, all labour and material charges including lower- ing, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as Stainless Steel ladder, C. I. manhole frame and covers water level indicatiors, lightening conductor, G. I. pipe railing around walk way and top slab, providing spiral staircase from ground level to roof level,M.S.grill gate of 2 mtr.height with locking arrangement of approved design. B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of Acrylic emulsion with silicon additives Paint to the structure including roof slab, food grade epoxy painting to internal surface & anti termite treatment for underground parts of the structure. and giving satisfactory water tightness test as per I.S. code, The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-incharge.

Item No : 151 GSR: Designing (aesthetically), and constructing RCC ground service reservoirs / RCC sumps in M-300 mix. of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion. to inside face of the container, including food grade epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye-pass arrangement consisting of C.I./ M.S. D/F. pipes, specials and valves of given diameters, providing and fixing accessories such as Stainless Steel ladder inside and outside, C.I. Manhole frame and cover, water top slab, B.B. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code and providing three coats of Acrylic emulsion with Silicon additives Paint to all expose surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications. Antitermite treatment shall be given for under ground portion of the structure

Item No : 152 Rising Main: HDPE Pipes (8.0 kg/sqcm); 160 mm dia. Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint /compression fitting joint or flanged joint excluding coupler/ specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.As per IS:4984-2016, the pipes upto 110 mm dia.should be supplied in coil form only.

Item No : 153 Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/ butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. HDPE Pipes (8.0 kg/sqcm); 160 mm dia.

Item No : 154 Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.

Item No : 155 Distribution System: HDPE Pipes (8.0 kg/sqcm); 110 mm dia. Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint /compression fitting joint or flanged joint excluding coupler/ specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.As per IS:4984-2016, the pipes upto 110 mm dia.should be supplied in coil form only.

Item No : 156 Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/ butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. HDPE Pipes (8.0 kg/sqcm); 110 mm dia.

Item No : 157 Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.

Item No : 158 Distribution System: HDPE Pipes (8.0 kg/sqcm); 75 mm dia. Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint /compression fitting joint or flanged joint excluding coupler/ specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.As per IS:4984-2016, the pipes upto 75 mm dia.should be supplied in coil form only.

Item No : 159 Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/ butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. HDPE Pipes (8.0 kg/sqcm); 75 mm dia.

Item No : 160 Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.For dia 75mm

Item No : 161 Supplying and erecting submersible pumpset of 3.75 KW/5 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 300 to 850 LPM discharge at 33 to 10 m head & (max. efficiency at 33 m head & 600 lpm) discharge & delivery pipe of Size-75 mm diameter with a necessary H type clamps as per specification no. WP-SMP

Item No : 162 Preparing and Providing of detailed designs, drawings and documents for Water Supply System up to Ground Service Reservoir including locating the source of water, through discussions with the local bodies and getting the necessary permissions and giving satisfactory trials of water supply sytems. Payment to the contractor will be based on the then prevailing PWD SSR.

Item No. 163 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M

Item No. 164 Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc )

Item No. 165 Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete.

Item No. 166 Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Item No. 167 Providing and constructing Ductile Iron circular manhole 45 cm dia. At top 90 cm at bottom up to 1.80 meter to 2.70 meter depth including excavation, laying 1:4:8 cement concrete bedding 15 cm thick burnt brick mansonry with 1:1 cement mortar plaster 25 mm thick inside and outside 20 mm (1:3) ductile iron heavy type cover with ring 125 kg in weight. High strength. More life and Durability, Good Antiskid Grip, Suitable to heavy theatric loading, Light weight casting after cost benefits for Transportation Refilling etc. as per requirement. with prior approval of concerned Superitending Engineer.

Item No. 168 Providing ISI standard R.C.C. pipes in standard lengths of class NP2 and diameter 300mm suitable for either collar joints or rubber ring joints, excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect, inspection charges, transport to departmental stores/site, unloading and stacking etc. complete as per IS-458/1988 Note : One collar should be supplied with each full length plain ended RCC pipe, cost including in rates below. One rubber ring should be supplied with each full length of socketed pipe, cost included in rates below.

Item No. 169 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent).

Item No. 170 Designing (aesthetically), providing, and constructing and giving satisfactory trials of modernised Sewage Treatment Plant consisting of receiving chamber, screen chamber, grit chamber, measuring flume, distribution chamber with primary and secondary treatment,without digester etc. as detailed below, administration block of suitable size including allied units for waste disposal with all civil and mechanical works involved, etc. complete (Turn key job).

Item No. 171 Navigational Channel Marking Buoy: Navigational Channel Marking Buoy, manufactured from UV stabilized Virgin Polyethylene, specially designed to withstand the Harsh Marine Environment. The color pigment added to the material during moulding process, foam filled with highly buoyant closed cell polyurethane with top marks and lights as per IALA recommendations

Item No. 172 Electric Power Supply and Distribution including Electric Substation, General lighting and Fire Extingusher

PART- B:-TESTING CHARGES AND ROYALTY CHARGES.

Item No.173 Taking laboratory testing of concrete cubes and verious materials used during construction in District Vigilance & Quality Control Laboratory or as per approved Laboratory etc complete

Crushing Value / Compressive Strength, Water Absorption, Specific Gravity Test for Stone / Rubble

Standard Consistancy, Fineness, Specific Gravity, Setting Time (Initial and Final), Compressive Strength, Soundness Test for Cement

Compressive Strength of Cement Concrete Cube

Sieve Analysis Test for Metal below 40 milimetre

Water Absorption, Specific Gravity, Impact Value, Crushing Value Test for Metal below 40 milimetre

Fineness Modulus (Sieve Analysis), Silt and Clay Content Test for Sand

Fineness Modulus (Sieve Analysis), Silt and Clay Content Test for Artificial Sand

Concrete Mix Design (with all tests on basic materials) for Grade M-30

Tensile Strength, Percent Elongation, Yield Stress, Weight per Metre, Bend / Rebend Test, Proof Stress (Steel Bar upto 16 milimetre)

Tensile Strength, Percent Elongation, Yield Stress, Weight per Metre, Bend / Rebend Test, Proof Stress (Steel Bar above 16 milimetre)

Concrete Mix Design (with all tests on basic materials) for Grade M-20

Liquid Limit & Plastic Limit for Plinth Filling

Compressive Strength of Cement Mortar

Water Absorption, Modulus of Rupture Test for Ceramic / Vitrified Tiles

Density, Moisture Content for Wood

Thickness, Mass per Running Metre of Aluminium Section

Concrete Mix Design (with all tests on basic materials) for Grade M-25

Granular Sub-Base Mix Design

Compaction Test (Proctor Density) for Earth Work

Flekiness Index / Elongation Index Test for Metal below 40 milimetre

Sieve Analysis Test for Metal 40 milimetre and above (Crusher Broken)

Water Absorption, Specific Gravity, Impact Value, Crushing Value Test for Metal 40 milimetre and above (Crusher Broken)

Flekiness Index / Elongation Index Test for Metal 40 milimetre and above (Crusher Broken)

Sieve Analysis Test for Hard Murrm

Liquid Limit and Plastic Limit for Hard Murum

Penetration, Softening Point, Flash and Fire Point, Specific Gravity for Asphalt VG-30 (Grade 60/70)

Viscosity Test for Asphalt VG-30 (Grade 60/70)

Ductility / Elastic Recovery for Asphalt VG-30 (Grade 60/70)

Sieve Analysis Test for Mix Material / Crushed Metal

Water Absorption, Specific Gravity, Impact Value, Crushing Value Test for Mix Material / Crushed Metal

Flekiness Index / Elongation Index Test for Mix Material / Crushed Metal

Extraction Test for Mix Material (OGC)

Bituminous Macadam Job Mix Design with all tests on aggreagte (excluding bitumen)

Water Absorption, Specific Gravity, Impact Value, Crushing Value Test for Metal 40 milimetre and above (Hand Broken)

Sieve Analysis Test for Metal 40 milimetre and above (Hand Broken)

Concrete Mix Design (with all tests on basic materials) for Grade M-40

Compressive Strength, Water Absorption Test for Paving Blocks - 80 milimetre thick, 400 Kilogram per Square Centimetre Strength

Liquid Limit and Plastic Limit for Earth Work using earth from Departmental Land

Compaction Test (Proctor Density) for Earth Work using earth from Departmental Land

Liquid Limit and Plastic Limit for Earth Work

Compaction Test (Proctor Density) for Earth Work

Item no. 174 Royalty Charges.

Soling stone

Quarry Spaul

Sand for filling

Hard murum

Metal 40 mm & above (HB)

Earth

EMJAY CONSTRUCTIONS