REPAIIR AND PAINTING OF STEEL FURNITURE UNDER GE NARANGI

Amount

REPAIRS TO ALMIRAH STEEL LARGE/ MEDIUM (FD-67M,350,351, 1031 & 1032)

Replacement of existing unserviceable handle by providing new Mild Steel chromium plated handle of standard size including nuts and washers of Almirah large/medium steel best quality as approved all as specified and directed.

S&F new 75mm 6 lever lock with brass levers & stainless steel keys in duplicate fixed with suitable screws, welding as required for Almirah large/Medium steel including removing the existing unserviceable lock.

S&F new steel cleats for supporting shelves in Almirah large/ medium steel including removing the existing unserviceable cleats complete all as directed.

Removing unserviceable legs and S&F new leg of Almirah large steel made of 1mm/19 Gauge thick CRCA sheet bend to shape duly painted with one coat of red oxide primer and fix with Gas welding as shown on drg complete all as directed.

All as per item No 1.04 here-in-above but leg of Almirah medium steel.

Removing unserviceable 3 way locking device from Alimarh large steel and fixing new locking device all as specified.

All as per item No 1.06 here-in-above but of Almirah medium steel.

M&L for welding of thickness not exceeding 6mm and length not exceeding 2.5cm for foot rest of almirah large steel by gas welding wherever required complete all as specified and directed.

Preparation of old painted surfaces of Almirah large steel internally and externally including shelves (Top & bottom) by No 50 sand paper and wire brush and applying putty on the patch and rubbing with sand paper No 150 to make surface even thereafter applying one coat of red oxide primer and applying a coats of synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing.

All as per item No 1.09 here-in-above but for Almirah medium steel.

REPAIRS TO BED HARD TOP STEEL (FD/MAP/E6/08(R)

Removing the old welding spots from broken welding joints and re-welding in the same place as required. Thereafter preparation of old surface by sand paper No 50 and wire brush and apply one coat of synthetic enamel paint in Black colour over a coat of red oxide primer complete all as specified and directed.

Removing the existing unserviceable /broken ply wood top and supply and fixing new 12 mm thick BWR plywood top ISI marked alongwith 06 in Nos Countersunk screws and washers on three stiffeners all as shown on Drg and as specified and directed.

Removing the existing unserviceable shoe and S&F new PVC shoe in leg of Bed Hard as per existing pattern.

REPAIRS BOOK CASE STEEL (FD-1028)

Removing unserviceable glass from shutters & Supplying and fixing new sheet glass of 5mm thick, plain, ordinary glazing quality conforming to the requirement of IS – 1761 of size 870 X 380 mm all as shown on drawing complete all as specified and as directed.

Removing unserviceable handle & Supplying and fixing new chromium plated handle 100 mm long as per existing pattern complete all as specified and as directed.

Removing unserviceable lock & Supplying and fixing new locks with duplicate keys all as per existing complete all as specified and as directed.

Preparing the existing steel surfaces by scrapping with sand paper and spray painting with one coat of synthetic enamel paint including removing the unserviceable rubber shoes and supply and fixing new of same size rubber shoes all as specified and directed.

REPAIRS TO CHAIR VERANDAH (FD-359 & 256)

Removing the existing unserviceable/ plastic cane, re-canning of chairs verandah with 4 mm wide 0.5mm thick plastic cane complete all as specified and shown on drg.

Preparing the existing steel surfaces and spray panting with one coat of white synthetic enamel paint and providing new plastic shoes for chair verandah & including taking down old shoes complete all as specified and shown on Drg.

REPAIRS TO CHAIR VERANDAH (FD/MAP-II/06)

S & F new PVC seat made of PPCP material 4mm thick (Make : AMKO/SWASTIC/HARMONY) of Chair Verandah MAP including taking down the old worn out /broken seat all as specified as shown on drg and directed by Engr-in-Charge.

S & F new PVC Back made of PPCP material 4mm thick (Make : AMKO/SWASTIC/HARMONY) of Chair Verandah MAP including taking down the old worn out /broken Back all as specified as shown on drg and directed by Engr-in-Charge.

Preparing the existing steel surfaces and spray panting with one coat of white synthetic enamel paint and providing new plastic shoes for chair verandah & including taking down old shoes complete all as specified and shown on Drg.

REPAIRS TO CHARPOY GI PIPE PLYWOOD TOP (FD-220)

Removing the existing unserviceable ply wood from GI charpoy and supply & fix 12mm thick plywood, BWR grade, ISI marked alongwith two angle iron stiffeners 900x25x3mm with 08 Nos Nut Bolt complete all as specified and directed.

Removing the existing unserviceable / broken long rail 32mm dia and supplying and fixing new long rail for charpoy GI Pipe medium grade .

Preparing short rail from broken long rail obtained from Sl item No 6.02 above and fixing for charpoy GI pipe complete all as specified and shown on drawing including removing the existing broken/ unserviceable short rail .

Preparing leg of GI Charpoy made from old long/short rail obtained from item No 6.02 & 6.03 above and welding 3mm thick base plate to the bottom of the leg and preparing MNF clamp holes as per existing all as specified

Supply and fixing GI 3 way elbow 32mm bore,ISI marked, length not less than 65mm in each way including dismantling of old GI elbow.

Supply and fixing GI check nut, 5mm thick suitable for 32mm GI pipe (ISI Marked) including dismantling of unserviceable check nut.

CHAIR CB STEEL WITH ARMS (FD-75M)

Removing the existing unserviceable/ broken seat for chair CB steel with arms and supply and fix new Seat of size 450 x 390 mm complete with frame made out of 50 X 50 mm 1st class hard wood members & canned with 2 mm wide plastic cane of oval shaped & 4 mm wide plastic cane for borders in Godrej pattern complete all as specified and shown on drg including french polishing to wooden surfaces all as directed.

All as per item No 7.01 above but for back of chair CB steel with Arms.

Removing the existing unserviceable/ broken Arm rest for chair CB steel with arms and supply and fix new Arm rest of size 420 X 50 X 20mm 1st class hard wood made to complete all as specified & shown on drg including french polishing to exposed surfaces all as directed. (Each Arm rest measured separately)

S&F MS plate of size 50mm X 20mm X 4 mm thick duly welded on two seat pipe for support to seat of chair CB steel all as specified and directed.

Preparation of steel surfaces of chair tubular steel with arms and applying one coat of synthetic enamel paint of approved colour complete all as directed

CHARPOY HARD TOP (FD/MAP-II/01 )

Removing the old welding spots from broken welding joints and re-welding in the same place as required & denting and straightening of MS Pipes thereafter preparation of old surface by sand paper No 50 and wire brush and apply one coat of synthetic enamel paint in Black colour over a coat of red oxide primer complete all as specified and directed.

Removing the existing unserviceable /broken ply wood top and supply and fixing new 12 mm thick BWR plywood top ISI marked alongwith countersunk screws bolted on the stiffeners 06 in Nos all as shown on Drg and as specified and directed .

REPAIRS TO CHAIR WRITING OFFICERS (FD/E6/MAP/12)

Removing the existing unserviceable PVC arm rest and Supply and Fix in repairs new PVC armrest of best quality one No in one piece arm rest of size 24cmx 6.4cmx 3.3cm shall be made out of polyurethane 76-85 shore ‘A’ Hardness and reinforced with MS insert scratch and weather resistant.

Removing unserviceable Seat of chair writing and Supply and Fix new Seat 75mm thick polyurethane foam(PU) moulded with density 50-55kg per cubic metre thick and hardness duly covered with tapestry cloth not less than 250/- per RM all as specified and directed.

Removing unserviceable back of chair writing and Supply and Fix new back 75 mm thick (PU) polyurethane foam moulded with density 50-55kg per cubic metre thick and hardness duly covered with tapestry cloth not less than 250/- per RM all as per drg and as specified.

Removing unserviceable shoe of chair writing and S&F new shoe of chair all as specified and directed

LOCKERS STEEL BED SIDE ( FD-1029)

Removing the existing unserviceable handle of locker bedside & S&F new 100 mm long aluminium Handle complete all as specified & shown on drg.

Removing the existing unserviceable hasp & staples & S&F new mild steel 100 mm long hasp & staples all as specified & shown on drg for locker bedside.

Preparation of old painted surfaces of locker steel internally and externally including shelves (Top & bottom) by No 50 sand paper and wire brush and applying putty on the patch and rubbing with sand paper No 150 to make surface even and applying a coat synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing.

S&F new legs of locker steel made of 1.6 mm thick MS sheet bend to shape duly painted with one coat of Red oxide primer and two coats of spray paint and fix with Gas welding as shown on drg including removing of unserviceable legs complete all as directed.

Removing unserviceable conduit pipe and supplying and fixing new chromium plated 20mm dia conduit pipe of 1.6mm thick wall thickness

Removing unserviceable hinges and Supplying and fixing new hinges to shutters by riveting or gas welding as per existing

TABLE COMPUTER (FD/E6/MAP/03)

Removing the existing TOP of table computer 3'x2' and S&F new top of same size 18 mm thick prelaminated MDF board exterior grade both side decorative with standard PVC edging around and all as shown on drg.

Removing the existing any kind of unserviceable MDF Board Shelf and S&F new shelf of size 450x300mm made out of 18 mm thick Both side prelaminated MDF board exterior grade both side decorative as per existing with standard PVC edging around and all as shown on drg.

Removing unserviceable existing keyboard tray of table computer and Supply and Fix new key board tray of size 480mmx300mm duly covered with PVC edging and one set of telescopic channel of size 300mm as per drg and as specified.

Removing unserviceable drawers of table computer and S&F new drawer of size as following:- (a) Front made of pre-laminated MDF Board Ext Gde of size 230x130mm (b) Sides made of pre-laminated MDF Board Ext Gde 300mmx90mm (c) Telescopic channels two in nos 300mm long (d) Bottom made of computer pre-laminated MDF Board Ext Gde 300mmx175 (d) Drawer End of size 140mmx90mm pre-laminated MDF Board Ext Gde

M&L for welding of thickness not exceeding 6mm and length not exceeding 2.5cm on frame of table computer by gas welding wherever required complete all as specified and directed.

TABLE DINING ORS STEEL (FD-165M)

Cleanliness/Preparation of surface and painting of complete lower M.S frame and applying synthetic enamelled paint (two coats) black colour .

Removal of unserviceable Top of table and supply and fixing new top of size 1800x600x18mm made out of MDF board (Exterior grade) covered from all side with Aluminium sheet 22 gauge thick covered all-round, top fixed with steel screw of required size complete all as directed.

Removal of unserviceable PVC shoe and S&F new PVC shoe suitable for MS pipe 25mm square complete all as directed.

TABLE OFFICE OFFICER/ CLERK/ TYPIST STEEL (FD-84/1004/1003)

Removing the existing unserviceable/ broken top of steel table office offrs and S&F new table top of 1370 X 760 mm of 18 mm thick prelaminated MDF board exterior grade with both side decorative with 6mm thick half round teakwood edging around all as specified on drg.

Removing the existing unserviceable/ damaged drawers of table office offrs steel/ table clk steel and S&F new drawers made of 1 mm thick MS sheet bend to shape as including necessary welding shown on drg.

Removing the existing unserviceable lock and supply and fix new brass lock of harrison/Link/Godrej 65mm 6lever with duplicate keys

Preparation of old painted surfaces of tables internally and externally including shelves (Top & bottom) by No 50 sand paper and wire brush. Applying putty on the patch and rubbing with sand paper No 150 to make surface even applying one coat of synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing.

TABLE (900x600) STEELWITHOUT/WITH DRAWER (FD-1007/1008)

Removing the existing unserviceable/ broken top of steel table and S&F new table top of 900 X 600 mm of 18 mm thick prelaminated MDF board exterior grade both side decorative with standard PVC edging around and all as shown on drg.

Removing the existing unserviceable/ damaged drawer of table 900x600 and S&F new drawers made of 1 mm thick MS sheet bend to shape as including necessary welding shown on drg.

Removing the existing unserviceable lock and supply and fix new lock of harrison/Link/Godrej 65mm 6 lever with duplicate keys

Preparing steel surface of table and applying one coat of synthetic enamel paint by spray painting complete all as specified & shown on drawing.

Table Bed side (FD/E6/MAP/15R)

Removing the existing unserviceable top & supply & fix 18 mm thick pre-laminated MDF Board exterior grade of size 450mmx450mm with 6 mm thick teakwood edging all round complete all as shown on drgs.

Preparing old painted steel surfaces of frame & apply one coat of black synthetic enamel paint including removing the unserviceable rubber shoes and supply and fixing new of same size rubber shoes all as specified and directed.

Removing unserviceable Telescopic channel and supply and fix new telescopic channel 300mm long in any large or small drawers of table bed side all as specified and directed.

Repairs to Trestle store room Iron (FD-86M)

M&L for welding of thickness not exceeding 6mm and length not exceeding 2.5cm on frame of Trestle store room Iron by arc welding wherever required complete all as specified and directed.

Preparation of old painted surfaces of trestle No 50 sand paper and wire brush. Applying putty on the patch and rubbing with sand paper No 150 to make surface even and applying a coat of synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing.

KIRAN REED INDUSTRIES

RK STEEL FABRICATORs

bharat refrigeration and electric co.

VENUS TRADING CORPORATION