REPAIR/REPLACEMENT OF INTERNAL ELECTRIFICATION INCLUDING CONNECTED ITEMS FOR OTM/MD ACCN AT AMRITSAR CANTT

Amount

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, sockets, lamp holders, brackets, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls etc. as per existing finishes by plastering, repairs and white / colour wash etc. complete all as specified and directed.

M & L point wiring for one light point / fan point / bell point with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated FRLS 1.50 sqmm size copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed, are as follows :-Make RR Kabel/Polycab/Havells (a) One light/one fan/one bell point controlled by one, one way switch.

All as per Srl item No 2 above but for One light point controlled by two Nos of two way switch.

All as per Srl item No 2 above but for One socket outlet 5 pin 5 Amp controlled by one, one way switch on same board.

All as per Srl item No 2 above but for One socket outlet 5 pin 5 Amp controlled by one, one way switch on indipendent board.

All as per item No. 2 hereinbefore but wiring with using cable 2.50 sqmm size copper wire (FRLS) and earth wire of PVC insulated (Green colour) 1.50 Sqmm size copper wire for one 6 pin socket outlet, 16 Amperes on independent board.

M & L Point wiring complete with 1.5 Sq mm (nominal area)FRLS PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 25 mm dia and 1.5 mm wall thickness and conduit fittings including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wire to common earth and connecting to earth dolly and Metal Flush box, cover plate with frame of suitable size for fixing modular switches/sockets/fan regulator etc complete all as specified for the following (Note : Cost of Metal boxes and modular accessories like cover plates etc will be measured and paid separtely) Make of wire RR Kabel/Polycab/Havells (a) Fan point/ exhaust fan point / one light point / bell/ buzzer controlled by one switch/ bell push.

All as per Srl item No 7 above but for One light point controlled by two Nos of two way switch.

All as per Srl item No 7 above but for One socket outet point 5 amps on the same board.

All as per Srl item No 7 above but for One socket outet point 5 amps on the independent board.

All as Ser item 7 here in before but with 2.5 sq mm wire and earth wire of 1.5 sq mm for 3 Pin 15 Amp modular type socket outlet.

M & L point wiring for one light point / fan point / bell point with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core multi-stranded) copper conductor cable (FRLS) drawn into and including PVC casing capping/PVC Conduit of suitable size with its all necessary fittings and accessories on wooden / stone / brick masonry wall surface and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size smulti standard copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed. (a) One light/one fan/one bell point controlled by one, one way switch.

All as per Srl item No 12 above but for One socket outlet 5 pin 5 Amp controlled by one, one way switch on same board.

All as per Srl item No 12 above but for One socket outlet 5 pin 5 Amp controlled by one, one way switch on indipendent board.

All as per item No.12 hereinbefore but wiring with using cable 2.50 sqmm size copper wire (FRLS) and earth wire of PVC insulated (Green colour) 1.50 Sqmm size copper wire for one 6 pin socket outlet, 16 Amperes on independent board.

Supply and fixing of switch piano flush button single pole one-way 5 Ampere complete all as specified and directed. Make Anchor/Havells/Cona

Supply and fixing of switch piano flush button single pole two-ways 5 Ampere complete all as specified and directed.Make Anchor/Havells/Cona

Supply and fixing of socket outlet 5 Ampere, 2 and 3 pins (TOTAL 05 PINS), flush type 250 volts AC complete all as specified and directed. Make Anchor/Havells/Cona

Supply and fixing of switch piano flush button single pole one-way 15 Ampere complete all as specified and directed. Make Anchor/Havells/Cona

Supply and fixing of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and directed.Make Anchor/Havells/Cona

Fixing only Modular switch 6 Amp 1 way 1 module size complete all as specified and as directed by Engr-in-Charge.

Fixing only Modular socket shuttered 6 Amp 2/3 pin 2 module size complete all as specified and as directed by Engr-in-Charge.

Fixing only Modular socket 16 Amp multipurpose type 2 module size complete all as specified and as directed by Engr-in-Charge.

Fixing only Modular Fan regulator step type 120 watts 2 Module size complete all as specified and as directed by Engr-in-Charge.

Fixing only Modular Switch board box 2/3 module complete all as specified and as directed by Engr-in-Charge.

Fixing only Modular Switch board box 4/6 module complete all as specified and as directed by Engr-in-Charge.

Fixing only Modular Switch board box 8 module complete all as specified and as directed by Engr-in-Charge.

Supply and fix Modular Switch board box 10/12 module complete all as specified and as directed by Engr-in-Charge. Note Ser item No 21 to 28 will be issued under Sch'B'.Free for fixing only

Supply and fix cover plate 2/3 modular complete all as specified and as directed by Engr-in-Charge.

Supply and fix cover plate 6 modular complete all as specified and as directed by Engr-in-Charge.

Supply and fix cover plate 8 modular complete all as specified and as directed by Engr-in-Charge.

Supply and fix cover plate 10/12 modular complete all as specified and as directed by Engr-in-Charge. Note for item No 29 to 32 : The contractor shall incorporate cover plate to accommodate modular switches suitable of same make.

Supply and Fixing Modular switch 6 Amp 2 way 1 module size complete all as specified and as directed by Engr-in-Charge. Make Havells/Indo Asian/Polycab

Supply and Fixing Modular switch 16 Amp 1 way with indicator 1 module size complete all as specified and as directed by Engr-in-Charge. Make Havells/Indo Asian/Polycab

Supply and Fixing Ceiling rose, surface bakelite 3 terminal, 240 volts, 5 Amps with back plate of 3 mm thick bakelite, laminated hylem sheet of appropriate size ,complete ,all as specified. Make Anchor/Plaza/SSK

S & F lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings complete all as specified and directed. Make Anchor/Plaza/SSK

Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts single pole fixed over and including pressed steel sunk box of size 175 X 100 mm duly covered with 3 mm thick bakelite sheet complete all as specified and directed. Make Anchor/Plaza/SSK

S&F bell push, flush type, single pole 5 amps complete all as specified and directed. Make Anchor/Plaza/SSK

Supply and Fixing metal enclosure (plug & socket type DB) complete including single pole and neutral enclosure with two pin, earth plug and socket complete with one SP MCB C Curve type of capacity 20 Amp, 10 KA all as specified and directed. Make Schneider/Legrand/Hager

S & F MCB single pole, 240 volts, 6 to 32 Amper, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed. Make Schneider/Legrand/Hager

S & F MCB double pole, 240 volts, 40 to 63 Amper, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed.Make Schneider/Legrand/Hager

S & F MCB TPN higher rating, 240 volts, 100 Amper, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directedMake Schneider/Legrand/Hager

S & F sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 4 ways with 200 ampere rated bus bar, 240 volts fixed sunk / flush to the wall with IP-43 and IK-09 protection complete all as specified and directed.Make Schneider/Legrand/Hager

S & F sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 8 ways with 200 ampere rated bus bar, 240 volts fixed sunk / flush to the wall with IP-43 and IK-09 protection complete all as specified and directed.Make Schneider/Legrand/Hager

S&F Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 12 way with IP-43 and IK-09 protection, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s etc complete all as specified. Make (Note : cost of removing old wooden box and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate) Make Schneider/Legrand/Hager

S&F MCCB Incomer distribution board double door vertical type made out of CRCA MS sheet surface with insulated material like polyester or with epoxy powder coating surface mounting TPN 4 way, 415 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB and IP 43 - IK 09 protection with and incl 100 amp 36 kA 4 pole MCCB with thermal - magnetic setting and Icu = Ics = 100% including Suitable type MCB with blank plate including taking down old MCCB all as specified and directed complete all as specified. . (Note : The cost of removing old wooden/steel box etc and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate) Make Schneider/Legrand/Hager

M & L for sub main wiring with 1100 volt grade two single core FRLS Wire PVC insulated and unsheathed cable with stranded copper conductor 6 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 4 sqmm multi - stranded copper conductor as earth wire in green colour complete all as specified and directed. Including taking down old unserviceable sub main wiring .NOTE: 2 single core 6 sqmm and one 4 sqmm cable and PVC conduit shall be measured as one RM. Make RR Kabel/Polycab/Havells

M & L for sub main wiring with 1100 volt grade two single core FRLS Wire PVC insulated and unsheathed cable with stranded copper conductor 10 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 6 sqmm multi - stranded copper conductor as earth wire in green colour complete all as specified and directed Including taking down old unserviceable sub main wiring. NOTE: 2 single core 10 sqmm and one 6 sqmm cable and PVC conduit shall be measured as one RM. Make RR Kabel/Polycab/Havells

S & F wall /ceiling mounting LED 18 Watt pride plus/smart line tube light fitting complete with all acessories 1x18 Watt LED , suitable for domestic application, 240 Volts, 50 Hz, and internally pre-wired with 1.5 sqmm twin twisted flexible cable copper conductor and connection complete as per or its equivalent approved make complete all as specified and directed. Make Syska/Philips/Wipro

S & F in repair wall /ceiling mounting LED 9 Watt tube light fitting complete with all acessories 1x9 Watt LED , suitable for domestic application, 240 Volts, 50 Hz, and internally pre-wired with 1.5 sqmm twin twisted flexible cable copper conductor and connection complete all as specified and directed. Make Syska/Philips/Wipro

S & F decorative Gate light fitting made up of high grade unbreakable polycarbonate material suitable for 9 watt LED lamp (B-22 base) including one Nos LED bulb 9 watt with complete acessary Make Syska/Philips/Wipro

S & F in repair electronic ballast suitable for 1 X TLD, 36 watt / 36 watt PLL, type EBP 136 TLD, 240 volts 50 / 60 Hz Make Cromton/Philips/Havells

S&F energy saving new generation 10 watt LED built up, 6000k bulk head luminaire with opal diffuser light fitting complete with all acessories and connection complete.Make Cromton/Philips/Havells

Supply and fix in replacement of security light fitting LED 25 Watt aluminum pressure dia cast housing with touched glass cover IP-66 protection Including suitable size and accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with muyltistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal including taking down old CFL security light fitting all as specified and as directed of Make Havells/Syska/Wipro

S & F fan regulator electronic step type socket size and making all necessary connections complete all as specified and directed.Make Anchor/Havells /Cona

M & L for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1, GI protection pipe light grade 15 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete all as specified and directed. Note : - (i) Earth lead and protection pipe beyond 7.5 m shall be measured and Paid separately. (ii) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt.

S&F in repair ceiling mounting fitting LED type 36 W fitted in 2x2 ceiling including PVC wire upto 1.5 mtr from ceiling rose to fitting complete all as specified and directed. Make Havells/Syska/Wipro

S & F 25 mm bore light grade galvanised iron tubing with all necessary GI fittings as in protection pipe of cable, fixed to pole or laid under floor / ground / under road crossings for protection of cable complete all as specified and directed.

Material and labour service connection PVC cable 10 Sqmm 2 Core incl GI wire and PVC conduit for fixing in wall /pole incl connection completed all specified and directed.Make Havells/Polycab/RR Kabel

S&F LED flood light fitting 50 Watt with high pressure die cast housing IP65 protection single phase supply including connection with PVC wire all as specficed and directed. Make Havells/Syska/Wipro

S&Fpost top lantern LED fitting 15 Watt including LED bulb high grade unbreakable polycarbonate suitable for including connection with PVC wire all as specifed and directe Make Havells/Philips/Wipro

S& F GI bracket light grade GI Pipe 1.2 mtr Length for fixing of street light fitting 25/45/60 Watt including connection all as specified and directed.

S&F bell push, Module type, single pole 5 amps complete all as specified and directed. Make Legrand/Polycab/Syska

S&F LED Blub 9 Watt pin type 220 Volts including connection complete all as specified and directed Make Philips/Havells/Syska

S&F Ceiling light fitting 12 Watt as per sample including connection all as specified and directed by Engr-in-Charge. Make Syska/Philips/Wipro

S&F LED Blub 9 Watt Thread type 220 Volts including connection complete all as specified and directed MakeMake Polycab/Havells/Syska

S&F flexible pipe 40 mm dia including connection complete all as specified and directed.

S&F Casing /Caping 40 mm wide including connection complete all as specified and directed.

S&F Casing /Caping 20 mm dia including connection complete all as specified and directed.

S&F Hylem sheet 7" x 4" including screw complete all as specified and directed.

S&F Hylem sheet 9" x 11" including screw complete all as specified and directed.

S&F of over voltage release 230 Volt AC UC > 280 Volt 1 module for over voltage protection all as specified and directed Make Hager M2215 or equivalent in Legrand/Schneider

Gold STAR Aircon Service Centre

Bharat Builder

P S BUILDERS