Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.2 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹25.7 L+₹21,412.83 (0.84%)Rejected-Finance B 39 UPPER GROUND FATEH NAGAR NEW DELHI 110018 | WEST | DELHI | 110018 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹28.3 L+₹2.8 L (11.0%)Rejected-Finance | L3 | Rejected-Finance Being L1 | |
| 4 | L4₹33.5 L+₹8.1 L (31.6%)Rejected-Finance NEAR AVON PUBLIC SCHOOL DABHANW POST DANDI NAINI PRAYAGRAJ 211008 | PRAYAGRAJ | PRAYAGRAJ | UTTAR PRADESH | 211008 | L4 | Rejected-Finance Being L1 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
12 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST PRAYAGRAJ
GE WEST PRAYAGRAJ PIN-211001
REPAIR / MAINT WORK OF VARIOUS TYPE OF PUMP , MOTORS , CHLORONOME PLANTS , PLENARY MAINTENANCE OF DOZING PUMP, STARTER, PANEL BOARD AND CONNECTED WORKS AT COD CHHEOKI UNDER GE WEST PRAYAGRAJ
2024_MES_666490_1
8757/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
NEW CANTT PRAYAGRAJ
As per tender Documents
8 documents required · 8 mandatory
₹500
GE WEST PRAYAGRAJ
₹70,000
Yes
29 Oct 2024
18 Jul 2024
20 Sept 2024
18 Jul 2024
12 Sept 2024
1 Aug 2024
Amount
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth as in soft/ loose soil including forming of bottom surface to required level or slope for laying of CI/ GI pipe complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm each complete all as specified and directed.
Removing of surplus excavated material (soil) to a distance n.exc 50m and deposited where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
M&L for cutting of road metal surface for passing of pipe lines and making good the road surface with 150mm thick layer of compacted stone aggregate and existing thickness bituminous macadam or PCC 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified and directed. NOTE: (i) Excavation and earth work shall be measured and paid separately under relevant item. (ii) Proper compaction shall be done to avoid any settlement.
Taking up old rusted/ worn out/ corroded cast iron / ductile iron pipe 80mm bore including all fitting with spigot and socket ends and lead joints including burning but joints and recovering lead complete all as specified and directed. NOTE: Excavation and earth work shall be measured and paid separately under relevant item.
Taking up old rusted/ worn out/ corroded cast iron / ductile iron pipe 100mm bore including all fitting with spigot and socket ends and lead joints including burning but joints and recovering lead complete all as specified and directed. NOTE: Excavation and earth work shall be measured and paid separately under relevant item.
Taking up old rusted/ worn out/ corroded cast iron / ductile iron pipe 150mm bore including all fitting with spigot and socket ends and lead joints including burning but joints and recovering lead complete all as specified and directed. NOTE: Excavation and earth work shall be measured and paid separately under relevant item.
Supply and laying for cast iron pipe 80mm bore Class 'LA' with spigot and socket ends centrifugally cast, in any length, suitable for lead joints, laid in trenches complete all as specified and directed.
Laying only for cast iron pipe 80mm bore with spigot and socket ends centrifugally cast, in any length, laid in trenches including cleaning and removal of all blockages by using splitted bamboo/ steel rod effectively before fixing complete all as specified and directed. NOTE: Old serviceable cast iron/DI pipe retrieved from taking down of respective item shall be used.
Supply and laying for cast iron pipe 100 mm bore Class 'LA' with spigot and socket ends centrifugally cast, in any length, suitable for lead joints, laid in trenches complete all as specified and directed.
Laying only for cast iron pipe 100 mm bore with spigot and socket ends centrifugally cast, in any length, laid in trenches including cleaning and removal of all blockages by using splitted bamboo/ steel rod effectively before fixing complete all as specified and directed. NOTE: Old serviceable cast iron/DI pipe retrieved from taking down of respective item shall be used.
Supply and laying for ductile iron pipe 100mm bore Class 'K-9' with spigot and socket ends centrifugally cast, suitable for tyton type joints, in any length, laid in trenches complete all as specified and directed.
Supply and laying for cast iron pipe 150 mm bore Class 'LA' with spigot and socket ends centrifugally cast, in any length, suitable for lead joints, laid in trenches complete all as specified and directed.
Laying only for cast iron pipe 150 mm bore with spigot and socket ends centrifugally cast, in any length, laid in trenches including cleaning and removal of all blockages by using splitted bamboo/ steel rod effectively before fixing complete all as specified and directed. NOTE: Old serviceable cast iron/DI pipe retrieved from taking down of respective item shall be used.
Supply and laying for ductile iron pipe 150 mm bore Class 'K-9' with spigot and socket ends centrifugally cast, suitable for tyton type joints, in any length, laid in trenches complete all as specified and directed.
M&L for run lead joints for cast iron spigot and socketed pipes and filling of 80mm bore pipe joint complete all as specified and directed.
M&L for run lead joints for cast iron spigot and socketed pipes and filling of 100mm bore pipe joint complete all as specified and directed.
M&L for run lead joints for cast iron spigot and socketed pipes and filling of 150mm bore pipe joint complete all as specified and directed.
M&L for rubber gasket joints (Tyton joints) for cast iron spigot and socketed pipes and filling of 80 mm bore pipe joint complete all as specified and directed.
M&L for rubber gasket joints (Tyton joints) for cast iron spigot and socketed pipes and filling of 100 mm bore pipe joint complete all as specified and directed.
M&L for rubber gasket joints (Tyton joints) for cast iron spigot and socketed pipes and filling of 150 mm bore pipe joint complete all as specified and directed.
M&L for clamp joint with rubber or fibre board gasket including nut and bolts for straight end joint to flanged pipes and fittings of 80mm bore pipe joint complete all as specified and directed.
M&L for clamp joint with rubber or fibre board gasket including nut and bolts for straight end joint to flanged pipes and fittings of 100mm bore pipe joint complete all as specified and directed.
M&L for clamp joint with rubber or fibre board gasket including nut and bolts for straight end joint to flanged pipes and fittings of 150mm bore pipe joint complete all as specified and directed.
S&F CI fittings like bends, (any type, radius and angle), tapers any type (straight bend, increasing, decreasing or double socket etc), Tee pieces, single branch, 'Y' junction, double branch, cross (all socket or socket and spigot), collars, caps and plugs etc. suitable for pipe up to 150mm bore complete all as specified and directed.
Supply and fixing of 80 mm bore sluice valve, heavy duty both ends flanged class PN-I with high tensile brass spindle cast iron head operated wheel and cap top, nuts and bolts, washers including 3mm thick rubber gasket joint including taking down old unserviceable valve complete all as specified and directed.
Supply and fixing of 100 mm bore sluice valve, heavy duty both ends flanged class PN-I with high tensile brass spindle cast iron head operated wheel and cap top, nuts and bolts, washers including 3mm thick rubber gasket joint including taking down old unserviceable valve complete all as specified and directed.
Supply and fixing of 150 mm bore sluice valve, heavy duty both ends flanged class PN-I with high tensile brass spindle cast iron head operated wheel and cap top, nuts and bolts, washers including 3mm thick rubber gasket joint including taking down old unserviceable valve complete all as specified and directed.
S&F 200 mm bore sluice valve, heavy duty both ends flanged class PN-I with high tensile brass spindle cast iron head operated wheel and cap top, nuts and bolts, washers including 3mm thick rubber gasket joint including taking down old unserviceable valve complete all as specified and directed.
Taking out of 100 mm bore sluice valve for repair, refacing, regrinding, repacking stuffing box of sluice valve spindle including taking apart and reassembling including replacement of gland packing, nut, bolts etc. and refixing the same complete all as specified and directed.
Taking out of 150 mm bore sluice valve for repair, refacing, regrinding, repacking stuffing box of sluice valve spindle including taking apart and reassembling including replacement of gland packing, nut, bolts etc. and refixing the same complete all as specified and directed.
Taking out of 200 mm bore sluice valve for repair, refacing, regrinding, repacking stuffing box of sluice valve spindle including taking apart and reassembling including replacement of gland packing, nut, bolts etc. and refixing the same complete all as specified and directed.
S&F in replacement 100mm bore cast iron non returning valve, heavy duty both ends flanged, with nuts, bolts and washers including 3mm thick rubber gasket joint complete all as specified and directed.
S&F in replacement 150mm bore cast iron non returning valve, heavy duty both ends flanged, with nuts, bolts and washers including 3mm thick rubber gasket joint complete all as specified and directed.
S&F in replacement 150mm bore S G iron body Wafer type check valves/ non returning valve,, with nuts, bolts and washers including 3mm thick rubber gasket joint complete all as specified and directed.
S&F in replacement 100mm bore butterfly valve IS:13095 (wafer type), gear operated, ISI marked, heavy duty both ends flanged, including nuts, bolts and washers including 3mm thick rubber gasket joint complete all as specified and directed.
S&F in replacement 150mm bore butterfly valve IS:13095 (wafer type), gear operated, ISI marked, heavy duty both ends flanged, including nuts, bolts and washers including 3mm thick rubber gasket joint complete all as specified and directed.
M&L for detecting of actual leakage joint of CI/DI pipe line and repairing the same by burning of lead joint, repair the joint with making fresh run lead joint with retrieved lead including new lead, if required and testing including excavation up to one cum, returning filling in for 80mm bore pipe complete all as specified and directed.
M&L for detecting of actual leakage joint of CI/DI pipe line and repairing the same by burning of lead joint, repair the joint with making fresh run lead joint with retrieved lead including new lead, if required and testing including excavation up to one cum, returning filling in for 100mm bore pipe complete all as specified and directed.
M&L for detecting of actual leakage joint of CI/DI pipe line and repairing the same by burning of lead joint, repair the joint with making fresh run lead joint with retrieved lead including new lead, if required and testing including excavation up to one cum, returning filling in for 150mm bore pipe complete all as specified and directed. NOTE FOR SRL ITEM NO. 38.00 39.00 & 40.00: Contractor shall execute the work immediately as and when complaint received. Contractor will be responsible for any damage on account of delay in execution of work.
Construction of brick masonry valve pit chamber of size 1050x1050x1050mm (internal dimensions) including PCC, brick work and 3mm thick MS sheet cover, MS frame of angle iron size 40x40x6mm around valve pit, locking arrangement with pad lock of size 50mm dia brass 6 levers with duplicate keys (make:- Godrej) and painting all steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer including dismantling of existing damaged chamber complete all as specified and directed.
Construction of brick masonry valve pit chamber of size 900x900x900mm (internal dimensions) including PCC, brick work and 3mm thick MS sheet cover, MS frame of angle iron size 40x40x6mm around valve pit, locking arrangement with pad lock of size 50mm dia brass 6 levers with duplicate keys (make:- Godrej) and painting all steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer including dismantling of existing damaged chamber complete all as specified and directed.
M&L for repair to existing valve pit chamber of size 1050x1050mm comprising of desludging and cleaning, repair to chamber with cement mortar 1:4, repair to MS cover with necessary welding or changing of hinges etc. for smooth functioning complete all as specified and directed.
M&L for repair to existing valve pit chamber of size 600x600mm comprising of desludging and cleaning, repair to chamber with cement mortar 1:4, repair to MS cover with necessary welding or changing of hinges etc. for smooth functioning complete all as specified and directed.
Supply and laying of 15 mm bore galvanised steel water tubes 'medium grade' with all fittings laid in trenches or fixed to wall and ceilings or laid in floors including taking up or down old rusted/ worn out existing GI steel water tubing and connections complete all as specified and directed.
Supply and laying of 20 mm bore galvanised steel water tubes 'medium grade' with all fittings laid in trenches or fixed to wall and ceilings or laid in floors including taking up or down old rusted/ worn out existing GI steel water tubing and connections complete all as specified and directed.
Supply and laying of 25 mm bore galvanised steel water tubes 'medium grade' with all fittings laid in trenches or fixed to wall and ceilings or laid in floors including taking up or down old rusted/ worn out existing GI steel water tubing and connections complete all as specified and directed.
Supply and laying of 40 mm bore galvanised steel water tubes 'medium grade' with all fittings laid in trenches or fixed to wall and ceilings or laid in floors including taking up or down old rusted/ worn out existing GI steel water tubing and connections complete all as specified and directed.
Supply and laying of 50 mm bore galvanised steel water tubes 'medium grade' with all fittings laid in trenches or fixed to wall and ceilings or laid in floors including taking up or down old rusted/ worn out existing GI steel water tubing and connections complete all as specified and directed.
Supply and laying of 80 mm bore galvanised steel water tubes 'medium grade' with all fittings laid in trenches or fixed to wall and ceilings or laid in floors including taking up or down old rusted/ worn out existing GI steel water tubing and connections complete all as specified and directed.
S&F in repair 15mm bore stop valve cast copper alloy bright finished body, screwed down, high pressure with crutch handle, opening fully way screwed both ends externally threaded for iron pipe or for union complete all as specified and directed. NOTE: Weight of one stop valve shall not less than 400 gms.
S&F in repair 20mm bore stop valve cast copper alloy bright finished body, screwed down, high pressure with crutch handle, opening fully way screwed both ends externally threaded for iron pipe or for union complete all as specified and directed. NOTE: Weight of one stop valve shall not less than 500 gms.
S&F in repair 25mm bore stop valve cast copper alloy bright finished body, screwed down, high pressure with crutch handle, opening fully way screwed both ends externally threaded for iron pipe or for union complete all as specified and directed. NOTE: Weight of one stop valve shall not less than 600 gms.
S&F 40mm bore gun metal, globe or gate valves, with iron wheel heads, screwed both ends for iron pipes and fixed complete all as specified and directed.
S&F 50mm bore gun metal, globe or gate valves, with iron wheel heads, screwed both ends for iron pipes and fixed complete all as specified and directed.
M&L for cutting of cast iron pipes in position for insertion of new tees, branches, etc. and reducing to required length of 100mm bore of pipe complete all as specified and directed.
M&L for cutting of cast iron pipes in position for insertion of new tees, branches, etc. and reducing to required length of 150mm bore of pipe complete all as specified and directed.
M&L drilling and tapping cast iron water mains (in position) for branch connection of 20mm bore CI/GI pipe including and provn of suitable size MS clamp with nuts, bolts and washers and welded with one GI socket complete all as specified and directed.
Supply and testing Chlorine testing kit with Reagent Bottle,Colour Comparator, Test Jar complete Make: Tolexo/REMCO/Koundal complete all as specified and directed
M&L for testing of water samples including collection of samples in bottles/containers and depositing to testing agency i.e. CGWB, UP Pollution Control Board or any approved Govt. lab in same day and submitting results complete all as specified for following parameters:- (a) Turbidity, (b) Ph value, (c) Total hardness, (d) Iron, (e) Chloride, (f) Residual Free Chloride, (g) Fluoride, (h) Dissolved Solids, (j) Calcium, (k) Mercury, (l) Arsenic, (m) Lead, (n) Pesticides, (o) Alkalinity, (p) Nitrate, (q) Total collifarm, (r) e- Collifarm.
S&F in replacement horizontal type Submersible pump, 3 HP capacity, single phase 230 Volts from water fountain including connection complete all as specified and directed.
S&F in replacement horizontal type Submersible pump, 1.5 HP capacity, single phase 415 Volts from water fountain including connection complete all as specified and directed.
M&L for cleaning and disinfecting of over head tanks of capacity 45000 litres to 100000 litres located at Estate and depot area Allahabad complete all as specified and directed comprising with the following operations:- (i) In the first step, dewatering of OH tank shall be carried out with portable submersible pump with flow rate not less than 30000 litres/hr. (ii) In the second step, removal of left over dirty water and sludge shall be carried out with suitable sludge removal pump. (iii) In the third step, cleaning of internal walls, floors, ceiling of OH tank by high pressure water jet is to be done. High pressure machine should develop pressure 80-120 bar. It should be ensured that no dirt, algae or mass shall remain on surface of tank. (iv) In the fourth step, removal of remaining sludge shall be carried out with industrial vacuum cleaner. (v) In the fifth step, OH tank shall be sterilized by spraying anti bacterial agent (Tanclean or equivalent as approved) using high pressure machine. Dose of this agent must be as per OCED guidelines 423 adopted on 17 Dec 2001 (i.e. 1 litre of concentrated agent mixed with 40 litres of water to produce mixture. 1 litre of this mixture is to be used to disinfect 10000 litres capacity tank and higher capacity tanks in proportion). (vi) In the last step, treatment of inside tank by exploring UV radiation to kill further suspended or floating bacteria. This is to be done by glowing UV lamp inside tank as per NSF standard 55-1991 (i.e. 16000 µW-sec/cm² or in other words 3-5 minutes according to capacity of tank). Notes: (a) The work should be got executed through reputed specialized water tank cleaning agency and shall be approved in writing by GE before commencement of this work . (b) After completion of work a certificate regarding bacteria free should be submitted to Deptt. (c) Coloured photographic evidence of stage wise cleaning of OHT shall be submitted in duplicate to the Deptt. (d) Date of Cleaning, date of expiry and capacity of tank will be written on OHT with Paint with 5cm high letters or figures (Block, Roman) complete. (e) The cost of above requirement is deemed to be inclusive in contractor's quoted rates and no any extra payment shall be admissible on this account.
M&L for detecting of actual leakage of water main pipe line as per complaint received from deptt on daily complaint basis and repairing the same including necessary fittings as required and testing including excavation up to one cum, returning filling in for 50mm bore GI pipe complete all as specified and directed.
M&L for detecting of actual leakage of water main pipe line as per complaint received from deptt on daily complaint basis and repairing the same including necessary fittings as required and testing including excavation up to one cum, returning filling in for 40mm bore GI pipe complete all as specified and directed.
M&L for detecting of actual leakage of water main pipe line as per complaint received from deptt on daily complaint basis and repairing the same including necessary fittings as required and testing including excavation up to one cum, returning filling in for 25 / 20 mm bore GI pipe complete all as specified and directed. NOTE FOR SRL ITEM NO. 64.00, 65.00 & 66.00 : Contractor shall execute the work immediately as and when complaint received. Contractor will be responsible for any damage on account of delay in execution of work. Necessary fitting as required shall be paid as supply only under respective item.
Supply only GI union 20 mm dia complete all as specified and directed
Supply only GI union 25 mm dia
Supply only GI union 40 mm dia
Supply only GI union 50 mm dia
Supply only GI long screw with socket or check nut 20 mm dia
Supply only GI long screw with socket or check nut 25 mm dia
Supply only GI long screw with socket or check nut 40 mm dia
Supply only GI socket 20 mm dia
Supply only GI socket 25 mm dia
Supply only GI socket 40 mm dia
Supply only GI socket 50 mm dia
Supply only GI elbow 20 mm dia
Supply only GI elbow 25 mm dia
Supply only GI elbow 40 mm dia
Supply only GI elbow 50 mm dia
Supply only GI CI bib tap 20 mm dia
Supply only GI CI gate valve 25 mm dia
Supply only GI reducer 20x25 mm dia
Supply only GI reducer 40x25 mm dia
Supply only GI reducer 80x65 mm dia
Supply only GI flange 80 mm dia with nut bolts
Supply only GI Nipple 80 mm dia
Supply only rubber gland
Taking out and lowering Submersible pump set after repair and rewinding including MS Column pipe not more than 13 Nos. of 3 RM each of 100 mm dia including replacement of rubber packing, nuts, bolts, washers and cable connection complete all as specified and directed.
Taking out and lowering Submersible pump set after repair and rewinding including MS Column pipe not more than 13 Nos. of 3 RM each of 150 mm dia including replacement of rubber packing, nuts, bolts, washers and cable connection complete all as specified and directed.
M&L in replacement of MS column pipe, 100mm bore and 5.4 mm thick, each 3 RM long including lowering, making threads and provn of MS Flange, cutting of Slot 3 Nos. in each flange, welding of flanges complete all as specified and directed.
M&L in replacement of MS column pipe, 150mm bore and 7.1 mm thick, each 3 RM long including lowering, making threads and provn of MS Flange, cutting of Slot 3 Nos. in each flange, welding of flanges complete all as specified and directed.
Taking out submersible pump set from column pipe of 40 HP capacity including disconnection of all electrical connections with all fittings for repair and transportation from site to workshop situated at local city for necessary repair/rewinding by cutting the burnt winding coils and cleaning the slots with non greasy materials and rewinding with PVC insulated copper wire as per existing size with insulating material complete reassembling the motor and back after repair and lowering and refixing of pump set with MS column pipe of 150 mm bore in bore well, including provision of replacement of all minor parts like rubber packing, nuts, bolts etc and reconnecting all electrical connection and including replacement of 16 Sqmm 3 core PVC insulated flat submersible cable and testing complete all as specified and directed.
Taking out submersible pump set from column pipe of 35/33 HP capacity including disconnection of all electrical connections with all fittings for repair and transportation from site to workshop situated at local city for necessary repair/rewinding by cutting the burnt winding coils and cleaning the slots with non greasy materials and rewinding with PVC insulated copper wire as per existing size with insulating material complete reassembling the motor and back after repair and lowering and refixing of pump set with MS column pipe of 150 mm bore in bore well, including provision of replacement of all minor parts like rubber packing, nuts, bolts etc and reconnecting all electrical connection and including replacement of 10 Sqmm 3 core PVC insulated flat submersible cable and testing complete all as specified and directed.
Taking out submersible pump set from column pipe of 20/25 HP capacity including disconnection of all electrical connections with all fittings for repair and transportation from site to workshop situated at local city for necessary repair/rewinding by cutting the burnt winding coils and cleaning the slots with non greasy materials and rewinding with PVC insulated copper wire as per existing size with insulating material complete reassembling the motor and back after repair and lowering and refixing of pump set with MS column pipe of 150 mm bore in bore well, including provision of replacement of all minor parts like rubber packing, nuts, bolts etc and reconnecting all electrical connection and including replacement of 10 Sqmm 3 core PVC insulated flat submersible cable and testing complete all as specified and directed.
M&L for MS flanged reducer suitable for 150x100mm bore pipe including jointing with rubber gasket, MS nuts, bolts and washers complete all as specified and directed.
Supply, jointing and testing of flat submersible flat cable PVC insulated PVC sheathed copper conductor of 16 sqmm 3 core complete all as specified and directed.
Repair and maintenance of LT panel/ star delta panel at water supply installation including provision of necessary PVC insulated copper wire, lugs, bushes, insulating material including necessary re-wiring with suitable size copper conductor complete all as specified and directed. NOTE: Spare parts of shall be measured and paid separately under respective item of schedule.
Supply only 4 pole power contactor Type-ML of rating 63/70 Amp for star delta stator/ LT panel complete all as specified and directed.
Supply only 3 pole power contactor Type-ML of rating 45/50 Amp for star delta starter/ LT panel complete all as specified and directed.
Supply only 2 pole power contactor Type-ML of rating 32 Amp for star delta starter/ LT panel complete all as specified and directed.
Supply only star delta timer ET-100 complete all as specified and directed.
Supply only Over Load Relay of capacity 28-50 Amp complete all as specified and directed.
Supply only Over Load Relay of capacity 45-75 Amp complete all as specified and directed.
Supply only Starter/stop push button complete all as specified and directed.
Supply only Single Phasing preventer VSP-3 complete all as specified and directed. Make: Minilec or equivalent as approved.
Supply only indicator LED type R, Y, B complete all as specified and directed.
Supply only timer ETS-D-1 complete all as specified and directed. Make : Minilec or as approved by GE
S & F in replacement of MCCB, 4 pole, 415 volts, 50 Hz, rated current 160 Amp, breaking capacity 25 KA, with thermal and magnetic release complete all as specified and directed.
S & F in replacement of MCCB, 4 pole, 415 volts, 50 Hz, rated current 200 Amp, breaking capacity 35/36 KA, with thermal and magnetic release complete all as specified and directed.
Supply transporting filling in TTCA (Chlorine) 95% granuals in 45 Kg container complete all as specified and directed.
Comprehensive monthly maintenance of Chlorine dosing plants installed at various installations ( Total Number of Pump Houses -4 ) of AGE MES Chheoki comprising of the following:- (a) Checking of all parts for functional aspects of dosing plants such as checking of valve, checking of gauge etc and making the plant functional for operation also by arresting any kind of leakage/ blockage of plants any time any location under AGE MES Chheoki area, the work will be done by skilled mechanic and other minor parts not specifically maintained shall also be replaced where required for proper functioning along with safety equipment complete all as specified and directed.
Disconnecting and taking out the UNSV 120 Watts agitator motor 960 RPM single phase 230 volts complete and rewinding with copper enemelled wire of suitable gauge, replacement of bearing ,brackets and tolerance rings suitable for agitator including refixing complete all as specified and directed.
S&F in replacement of gun metal gate valve 15 mm size ISI marked with iron wheel head, screwed both end for iron pipe complete all as specified and directed
Supply only spacer of 1/2 HP capacity chemical dosing pump complete all as specified and directed.
Supply only piston of 1/2 HP capacity chemical dosing pump complete all as specified and directed.
Supply only gear plate of 1/2 HP capacity chemical dosing pump complete all as specified and directed.
Supply only diafram of 1/2 HP capacity chemical dosing pump complete all as specified and directed.
Dismantling and taking out defective unserviceable butterfly valve and replacement with new butterfly valve 65 mm bore including jointing with MS nuts, bolts packing, minor adjustment complete all as specified and directed.
Dismantling and taking out defective unserviceable butterfly valve and replacement with new butterfly valve 80 mm bore including jointing with MS nuts, bolts packing, minor adjustment complete all as specified and directed.
Supply & fixing 1/2" hypo pump outlet NRV complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.
Supply & fixing 1/2" hypo pump inlet NRV complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.
Supply & fixing 1/2" NRV between hypo pump outlet and main line complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.
Supply & fixing digital timer XT-246, 220 volt AC complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.
Supply & fixing CPVC MTA 1/2" complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.
Supply & fixing CPVC FTA 1/2" complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.
Supply & fixing CPVC union complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.
Supply & fixing drain valve complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.
Supply & fixing flow guard gold complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.
Supply & fixing PVC dosing pipe 10mm dia complete all as specified and directed. Make: Vardhman or equivalent as approved.
Supply, installation, testing and commissioning in replacement of indoor type cubical panel board suitable for 3 phase, 4 wire, 415V, 50 Hz and CPRI approved manufacturer factory fabricated with CRCA sheet not less than 3 mm thick having modern fabrication process powder coating in approved shade having thickness not less than 100 microns provided with suitable gasket to make it dust and vermin proof and general constructions conforming to IS : 8623/93. The LT panel shall be front and back operable and duly compartmentalized for each control gears. The panel should have suitable size of aluminium Bus -bar three phase 4 wire system having current carrying capacity 400 Amps of the incomer MCCB. The panel should have the following incoming and out going controls duly fixed with the panel by means of suitable link plates complete all as specified and directed . Note:- PCC platform of suitable size for mounting the LT Panel is deemed to be included in the quoted rate.
(i) MCCB 4, pole 35 KA with adjustable thermal setting, 415V, 160 Amp - 01 No. (ii) MCCB 4, pole 35 KA with adjustable thermal setting, 415V, 100 Amp - 01 No (iii) Star delta starter comprising suitable size of 3 pole contactors for 40 HP submersible pump with thermal over load relay complete - 01 No (iv) Motor protection relay for single phase, over load, over voltage (v) Digital Volt meter 0-500 volts (vi) Ammeter 0-500 amps with suitable size of Cts (vii) All connections to be done through suitable size PVC insulated copper cables (viii) LED RYB indicator - 01 Set (ix) MCB' TP 32 Amps 10 KA - 01 No (X) MCB SPN 32 Amps 10 KA - 01 No (xi) Single phase preventer - 01 No
Schedule of Credit (MINUS) Rs. 229960.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum
ABHISHEK ENTERPRISES (BID ID -3077864)
Ambrish Builders (BID ID -3094420)
NEXT POWER ENTERPRISES (BID ID -3094064)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .