SPL REPAIR/ REPLACEMENT OF OLD ALUMINIUM/ COPPER WIRING AND ALLIED WORKS IN SARABHAI BLOCK AND CONNECTED OFFICES AT VARIOUS LOCATION UNDER GE (MCTE) MHOW

Amount

Taking down carefully copper/ alluminium point wiring (light, fan, sockets or power) complete including all fitings and fixtures such as switches, sockets, ceiling roses, pendents, regulators, light fittings etc, removing matrials to store for taking credit and making good disturbed surfaces complete all as specified and directed.

Taking down carefully copper/ aluminium sub-main wiring any type and making good the disturbed surface of walls and floors complete all as specified and directed.

Taking down existing ceiling fan/ exhaust fan/ Wall fan of any size and re-fixing the same after B/R work including overhualing/ servicing, winding of the fan, replacement of defective parts, painting of the complete fan with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter and providing three core flexible copper cable for connection from ceiling rose/ connector complete all as specified and directed.

Taking down carefully TPN DB/ SPN DBs/ sheet metal earth plug socket any size and any type including MCBs any type and making good the disturbed surface of walls and floors complete all as specified and directed.

Taking down carefully light fitting any type for refixing OR taken in schedule of credit complete all as specified and directed.

Taking down existing old unserviceble LT UG/ service cable of any descrition and size complete all as specified and directed.

M & L for Point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC surface conduit/ casing caping of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular GI sheet metal/ PVC flush box, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the following:- Note:- Make of modular GI flush box/ PVC box should be same with switch/ socket and type of wiring will be executed as per site requirement and direction by Engr-in-Charge.

One light/ fan/ bell controlled by one, one way switch 5/6 Amps complete all as specified and directed.

One 3 pin, 5/6 Amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch, complete all as specified and directed.

One 3 pin, 5/6 Amps socket outlet point on same board controlled by one, one way 5/6 Amps switch, complete all as specified and directed.

Point wiring with 2.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit/ surface/ casing caping of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 2.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 Amps socket out-let point on an independent board including modular flush box, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size and making good disturbed surface of walls and floors etc. complete all as specified and directed Note:- Make of modular GI Flush box/ PVC box should be same with switch/ socket and type of wiring concealed/ surface/casing caping will be executed as per site requirement and direction by Engr-in-Charge.

S&F of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V, complete all as specified and directed.

S&F modular switch 1 way 6 A, 1 module complete all as specified and directed.

S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S&F switch modular type 16 A, 1 module complete all as specified and directed.

S&F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

S & F bell push flush type, 5 Amp complete all as specified and directed.

S&F Buzzer Ding Dong AC 230 Volts Single pole complete all as specified and directed.

S&F lamp holder insulated body with back plate for batten fittings complete all as directed.

Supply and fix LED bulb of 7 watt, Of base B-22, Cat Part No LHLDBWHB4L8R007, lm 700, col tamp 6500 K suitable for fixing in lamp holder, complete all as specified and directed.

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

M&L for single pole and earth encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with one single pole MCB SP 20 Amps for inserting the same in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S&F Inverter LED batten 20 watt with squre profile and polycarbonate channel. Lithium lon battery with charging time 8 hourse -10 hourse and back up time upto 4-10 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories complete all as specified and directed.

S & F for Energy saving new generation environmental friendly long life versatile LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting and necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts, complete all as specified and directed.

S & F in repairs for LED luminaire 2 x 2 ft (size 600 x 600mm) square LED panel 35/36 watts, 220 volts, AC recessed/surface mounted type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed.

Supply and Fix in repairs flush mounting factory made Vertical FP DB, IP-43 Protection -IK 09 with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of space for 125 to 160 Amps MCCB as incomer and SP/ SPN/ TP MCBs as out going, 6 way (Optium 1+18 Module) complete all as specified and directed.

S&F MCCB 4 pole, 415 volts, in the existing panel/ location and connection with using aluminum lugs complete all as specified and directed for 160 Amps Adjustable type with breaking capacity 36 KA complete all as directed by Engineer- in-charge.

S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall, complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curveminiature circuit breaker (MCB) of 4P 63 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.

S&F MCB DB SPN 8 way double door with 200 Amps rated bus bar, 230 volts, 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall, complete all as specified and directed.

S&F MCB DB SPN 12 way double door with 200 Amps rated bus bar, 230 volts, 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as directed by Engineer- in-charge.

S&F MCB DB SPN 4 way double door with 200 Amps rated bus bar, 230 volts, 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as directed by Engineer- in-charge.

S&F 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 Amps and current carrying capacity in the MCB DB complete with connection by using suitable size of alluminium/ copper lugs, testing and commissioning complete all as specified and directed

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp, in the MCB DB Complete with connection by using suitable size of alluminium/ copper lugs, testing and commissioning complete all as specified and directed

M & L for sub main wiring with 04 runs of 10 Sqmm main wire along with 02 run of 10 Sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed/ surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same complete all as specified and directed. Note:- four runs of main copper conductor, two run of earth wire and one run of PVC conduit shall be measured as one unit length. Note:- Type of wiring (i.e concealed/ surface) will be executed as per site requirement and direction by Engr-in-Charge

M & L for sub main wiring with 02 runs of 6 Sqmm main wire along with 01 run of 06 Sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed/ surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same complete all as specified and directed. Note:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. Note:- Type of wiring (i.e concealed/ surface) will be executed as per site requirement and direction by Engr-in-Charge

All as per item No.33 here in above but with 2 runs of 4 Sqmm main wire along with 01 runs of 4 Sqmm earth wire.

S&F Ceiling fans complete with blades, down rods 15mm/ 12mm upto two mtr, electronic regulator and remote with battery and complete accessories, 230 V, 50Hz, 1200mm sweep and rated power 26W (+ 10%) and rate speed 350 RPM (+ 10%) Min air delivery 210 CFM with service value shall not be less than 8.46 BEE as per BIS. Five star rated with brushless direct current motor (BLDC), painting to match with existing surfaces including writing the MES number with synthetic enamel paint complete all as specified and directed. Note:- Rate of Electronic regulator and remote with battery shall be included in the quoted rate.

M & L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 Sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

Supply, laying and testing and commisioning cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core laid in pipes, trenches/ ducts, on poles and making good of excavated area to match with existing surface/ floor complete all as specified and directed.

Supply, laying and testing and commisioning cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 3.5 core laid in pipes, trenches/ ducts, on poles complete all as specified and directed.

Supply, laying and testing and commisioning cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core laid in pipes, trenches/ ducts, on poles complete all as specified and directed.

Supply laying and jointing GI pipe 'light grade' 50mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep in hard/dense soil and getting out complete all as specified and directed by Engr-in-Charge.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed.

Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed.

M&L for filling approved fine river sand in trenches as cable cushion to the full width of excavated trench, under and over cable complete all as specified and as directed. (Note : Punned thickness of sand shall be measured)

M&L for bricks slightly over burnt (kiln burnt), modular bricks, best quality, locally available, laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection all as specified and as directed.

M/s DKS Electricals (BID ID -3282137)

Manu Enterprises (BID ID -3282029)

Vinayak Trading House (BID ID -3281920)

MODI CORPORATION (BID ID -3281093)

Mighty Steel Sales Crop (BID ID -3282238)

m/s bansal construction (BID ID -3281884)

S.S. Engineers (BID ID -3281480)

ENVIRO TECH SERVICES (BID ID -3281149)

Sameer Auto Engineers (BID ID -3282412)

Ms Kailash Chandra Babulal (BID ID -3281965)

AGARWAL BUILDERS (BID ID -3282109)

sanjay traders (BID ID -3282149)