Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.3 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹8.9 L+₹48,880 (5.78%)Rejected-Finance M S RRK PROJECTS D 306 ADG P CHENNAI 11 3RD CROSS SIR MV LAYOUT VIDHYARANYAPURA POST BANGALORE 560097 | BENGALURU URBAN | KARNATAKA | 560097 | L2 | Rejected-Finance BEING NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹19,300
Closing Date
10 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I AF CHIMNEY HILLS BANGALORE
Asst Garrison Engineer I AF Chimney Hills Chikkbanavara Post Bangalore, PIN- 560 090
PROVISION OF MINOR WORK NO 09 AND MAINT AND REPAIR TO EXTERNAL ELECTRIC SUPPLY NETWORK AND CONNECTED WORK AT 58SU AF STN CHIMNEY HILLS
2022_MES_552870_1
8559/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
AGE I AF CHIMNEY HILLS BANGALORE
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
AGE I AF CHIMNEY HILLS BANGALORE
₹19,300
Yes
12 Jan 2023
19 Sept 2022
12 Oct 2022
19 Sept 2022
10 Oct 2022
26 Sept 2022
19 Sept 2022 - 24 Sept 2022
Amount
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard/dense soil.
M&L for cement concrete type B2 1:2:4 (40 mm graded aggregate) in post holes.
M&L for framed work such as grills, gratings, gates etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tank and similar works including fixing to channel section using MS bearing hinges to frame confirming to Fe-290 grade-E-165.
S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250) quality A.
M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over red oxide.
Supply and lay LT under ground cable XLPE insulated armoured 1100V grade with multistranded aluminium conductor confirming to relevant IS in trenches, ducts, through pipes fixed to wall etc all as directed including cable gland, terminal socket and connecting up of size 300 sqmm 3.5 core including dismantling of old U/S cable.
All as per item ser No 6 above but of size 185 sqmm 3.5 core
All as per item ser No 6 above but of size 120 sqmm 3.5 core
All as per item ser No 6 above but of size 70 sqmm 3.5 core
All as per item ser No 6 above but of size 50 sqmm 3.5 core
All as per item ser No 6 above but of size 25 sqmm 4 core
All as per item ser No 6 above but of size 16 sqmm 4 core
All as per item ser No 6 above but of size 10 sqmm 2 core
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in hard/dense soil for laying/repair of cable.
Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm thick.
Removing excavated materials to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.
Supply and lay brunt bricks class 'B' of size 230 mm x115 mm x70 mm in trenches for protection of UG cable.
M&L for Vegitable Riddled soil cushioning in trenches spreading and consolidation 8cm thick before laying the cable & 15 cm of sand after laying the cable complete all as specified .
Supply and fix Straight hot shrink cable joint kit for LT ug cable of size 50/35 sqmm 3.5 core including excavation,refilling of earth work at undergruond cable fault position and making good surface at the fault position complete all as specified and as directed.
Supply and fix Straight hot shrink cable joint kit for LT UG cable of size 95/70 sqmm 3.5 core including excavation,refilling of earth work at undergruond cable fault position and making good surface at the fault position complete all as specified and as directed.
Supply and fix Straight hot shrink cable joint kit for LT UG cable of size 16/10 sqmm 4 core including excavation,refilling of earth workat undergruond cable fault position and making good surface at the fault position complete all as specified and as directed.
supply and fix Straight hot shrink cable joint kit for LT UG cable of size 185/150 sqmm 3.5 core including excavation,refilling of earth work at undergruond cable fault position and making good surface at the fault position complete all as specified and as directed.
Supply and lay GI tubing light grade, 80mm dia in trenches for road crossing/laid in floors etc
All as per item ser No 23 above but 50mm dia
All as per item ser No 23 above but 25mm dia
Supply and fix Silicon rubber insulating tape with 25 mm width ,Weather and corrosion resistant all as specified and directed by engineer in charge .
Supply and fix Industrial First aid box ,Stainless steel body with all emergency medicines combines all as specified and direcetd by engineer in charge.
Supply and fix Electric shock treatment chart of dimensions 50 CM X 75 CM ,With Wooden Frame ,Hindi or english and kannad combined all as specified and directed by engineer in chrges
Material and labour one coat of grey/half white colour synthetic enamel paint after preparation of surfaces of existing LT panels/control switch boxes over 10 cm in width or girth complete all as specified and directed
S/F in repair current transformer coil ratio up to 800/5 Amps Class-1 insulation. Make:GEC/MEI/Crompton
Supply and fix phase LED indicator lamp with toggle switches including taking down of fused indicator lamp.
Supply and fix 0-500 volts Voltmeter including taking down unserviceable voltmeter as directed. Make: AE/MECO
Supply and fix Ammeter 0-400 Amp including taking down unserviceable ammeter .Make: AE/MECO
Servicing, commissioning and testing of LT panel including replacement of burnt out lugs, scraping the bus bar chamber with ewary paper, cleaning the bus bar panel with CTC, remove the burnt out electrical wiring and replacement of bolt, nuts, washer and new wiring for metering eqpt, phase sequence RYB with bus bar insulation tapes, heating with blower, reconnecting, testing and commissioning. Note:- (i)Cost of Lugs,Nuts, bolts, washers, insulation tapes, wiring & other connecting items shall be included in unit rate. (ii)Taking down old MCCB and refixing the same will be included above quoted rate .
Supply and install in repair MCCB, 4 pole, 415 v, adjustable type, 400 Amp, 50 HZ, 36 KA including spreader links on both sides complete all as specified and directed
All as per item no.36 above but fixed type, 25 to 100 A and 16 KA
All as per item no.36 above but fixed type, 125 A and 16 KA
All as per item no.36 above but adjustable type, 200 A and 36 KA
All as per item no.36 above but adjustable type, 250 A and 36 KA
M&L earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground earth pit not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below normal ground level, connected to galvanized iron strip 32x6mm as a earthing lead by means of bolts, nuts, checks nuts, washers etc made of galvanized of steel, earth strip including and protected by galvanized iron pipe(light grade) 40 mm dia from plate to Panel Board, galvanized iron pipe light grade 20mm dia bore and funnel watering including test point necessary excavation ,earth work, concrete pit M-10, CI cover, frame and funnel,Charchol dust,Salt all as specified in plate No 3 of SSR-1991(part-1) complete all as specified and as directed.
M&L earthing complete with copper plate 60×60cm ×3.15mm thick electrode buried directly in ground earth pit not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below normal ground level, connected to and 20×3mm copper strip as a earthing lea by means of bolts, nuts, checks nuts, washers etc made copper strip, earth strip including and protected by galvanized iron pipe(light grade) 40 mm dia from plate to Panel Board, galvanized iron pipe light grade 20mm dia bore and funnel watering including test point necessary excavation ,earth work, concrete pit M-10, CI cover, frame and funnel,Charchol dust ,salt all as specified in plate No 3 of SSR-1991(part-1) complete all as specified and as directed.
Supply and lay Elastomer sheathed flat twin core cable,aluminium conductor ,4 Sqmm all as per directed by engineer in charge .
Taking down unserviceable Aluminium cable lug 120/150/185 sqmm and supply with fixing the same all as directed.
Taking down unserviceable Aluminium cable lug 50/70/95 sqmm and supply with fixing the same all as directed.
Taking down unserviceable Aluminium cable lug 16/25/35 sqmm and supply with fixing the same all as directed.
RRK PROJECTS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .