Installation of panel board for existing 90 HP motor at Kootuhole, cubicle repair work in 300 HP HTR and Installation of 12.5 HP motor and pipeline for borewell near Maitrihal in Madikeri CMC limits

Installation of panel board for existing 90 HP motor at Kootuhole, cubicle repair work in 300 HP HTR and Installation of 12.5 HP motor and pipeline for borewell near Maitrihal in Madikeri CMC limits

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Labour charges for Erection, Electrification and commissioning of Pumpsets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well ca...

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x6 ...

Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tool...

Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tool...

Providing, laying and jointing HDPE pipes of specified grade and

conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including settingout, shoring, strutting, barricading, caution lights,...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of ilding, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement ncluding cost of all materials, machinery, labour, cleaning, traightening, cutting, bending, hooking, laping/welding joints, tying ...

Fabricating, supplying and erection of 9 Mtr long hot dip Galvanized Conical hot dip pole with with BSEN10025 grade S355JO steel plate for shaft, IS 2062 for base plate wit hdoor opening arrangeme...

Supply of LED flood light luminaries with pressure diecast aluminium housing

body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuse rwith Injection moulded pol...

Fixing halogen/metal halide/SVL/IL/LED flood light fitting over existing pole/wall ceiling including cla mps, bolts, nuts and wiring using suitable capacity wires

Suppling and Fixing miniature circuit breakers on existing MCB distribution boared using necessary fixing materials and C Type curve indicator ON/OFF energy cross 3 with short circuit breaking capacit...

Providing 1.1 KV XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG cable as per IS - 1554 (Part I) or IS - 7098 Part I Armouring strip thickness and resistivity as per IS 3...

Laying of cable in existing trench/ GI pipe/ stone ware/ RCC hume pipe using wooden/ Aluminum rollers as directed by the departmental staff 2.5 to 25 sqmm

Foundation works 5%

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and fixing No 20/5A Current Transformer (CT) Coil (HT CT Coil) at 300 HP HTR cubical, Kootuhole. The work including testing of CT by authorised authority and fixing and testing by CESCOM a...

Providing and fixing Potential Transformer (PT) Coil (HT CT Coil) at 300 HP HTR cubical, Kootuhole. The work including testing of PT by authorised authority and fixing and testing by CESCOM authorit...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in cluding ater thinnable priming coat with cement primer after th...

Painting Steel work with Deluxe Multi Surface Paint to give an even

shade. Two coat applied @ 0.90L/10 m² over an under coat of primer

applied @ 0.80 L/10 m² of approved brand and manu...

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work excavation by manual means for drains, canals, waste weir, draft, pproach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of ilding, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement ncluding cost of all materials, machinery, labour, cleaning, traightening, cutting, bending, hooking, laping/welding joints, tying ...

Earth retaining structures 10%

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Manufacturing, providing, trasporting, rolling, lowering, laying,

jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) con...

Providing, fabricating and fixing at site various diameter MS MJ ends to suit CI / DI pipe as per the sketch . The cost is inclusive of all materials i.e, rubber 'O' rings, flanges, bolts and nuts, c...