Facelifting works such as painting, distempering, etc. at Area Hospital of Pathakhera Area

Amount

Item code 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Item code 15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar.

Item code 6.34.2 - (6.4.2 - 6.1.2) Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 Coarse sand).

Based on item code 6.34.2 Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor two level in : Cement mortar 1:6 (1 cement : 6 Coarse sand).

Item code 13.1.2 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand).

Item code 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Item code 13.85.3 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.

Item code 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Item code 13.108.1 Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specification. One or more coats on old work.

Item code 13.87.2 White washing with lime to give an even shade : Old work (one or more coats).

Item code 13.99.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.

Item code 13.112.2 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Old work (one or more coats applied @ 0.83 ltr/10 sqm).

Item code 21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Item code 13.16.1 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand).

Item code 11.3.1 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate.

Providing and applying water-proofing wall putty of average thickness 1 mm, for exterior walls (including chhajjas), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth and water-proof complete.

Providing and fixing mirror finish C.P. brass/ stainless steel wall-mounted hand faucet/ health faucet/ hand jet of approved quality conforming to IS specifications, including the following: 1) Mirror finish C.P. brass two-way bib cock of approved quality conforming to IS specifications : 15 mm nominal bore; 2) Mirror finish metallic flexible tube upto 1.2 mtr long of approved quality conforming to IS specifications : 15 mm nominal bore; 3) Mirror finish wall hook of approved quality; and 4) Other required accessories, as required.

Total impact of GST for the purpose of CTC

JMD AND SONS

MOHAMMAD FASEEUDDEEN ANSARI

OM SAINATH AUTO PARTS

NIRBHAY KUMAR SINGH