Installation of Fire Pumps with Allied Equipments in New Judicial Complex Tower of Justice at Gurugram Haryana

Amount

Providing and fixing air vessel for fire pumps as per following specifications: Diameter - 450mm Dish ends - 10mm Height - 2100mm Finishing - Two coats of Red enamel paint of first grade over one coat of primer externally and two coats of epoxy coating inside Material of Construction - M.S. Test Pressure - 15 Kg./sq.cm.

Providing and installation of Syphons 15mm

Providing laying, testing and commissioning of `C` class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding of following sizes complete as required. Ms pipe 250mm (DSR 18.7.10)

Providing laying, testing and commissioning of `C` class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding of following sizes complete as required. Ms pipe 300mm (DSR 18.7.11)

Providing, installation, testing and commissioning of Air Release Valve 25mm

Providing, installation, testing and commissioning of Ball Valve 15mm

Providing, installation, testing and commissioning of Ball Valve 25mm

Providing, installation, testing and commissioning of Pressure Gauge 0-16kg/cm2 150mm Dial

Providing, installation, testing and commissioning of Pressure Switch(DSR 18.22)

Providing, installation, testing and commissioning of Test and Drain Valve 25mm

Providing, installation, testing and commissioning of Bellow PN 1.6 250mm

Providing, installation, testing and commissioning of Bellow PN 1.6 (100mm)

Providing, installation, testing and commissioning of Bellow PN 1.6 (150mm)

Providing, installation, testing and commissioning of Non return valve of follwing sizes confirmingtoIS: 5312 complete with rubber gasket, G.I bolts, nuts,washers etc. as required.(DSR 18.14) 250mm(DSR 18.14.9)

Providing, installation, testing and commissioning of Non return valve of follwing sizes confirmingtoIS: 5312 complete with rubber gasket, G.I bolts, nuts,washers etc. as required.(DSR 18.14)100mm(DSR 18.14.5)

Providing, installation, testing and commissioning of Sluice Valve PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with thenuts, bolts, washers, gaskets and confirming to IS 780 of following sizes as required.(DSR 18.12) 250mm (DSR 18.12.8)

Providing, installation, testing and commissioning of Sluice Valve PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with thenuts, bolts, washers, gaskets and confirming to IS 780 of following sizes as required.(DSR 18.12) 300mm(DSR 18.12.9)

Providing, installation, testing and commissioning of Sluice Valve PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with thenuts, bolts, washers, gaskets and confirming to IS 780 of following sizes as required.(DSR 18.12)100mm (DSR 18.12.5)

Providing, installation, testing and commissioning osstainless steel Y-Stainer fabricated out of 1.6 mmm thick stainless steel, 304grade sheet with 3mm dia holes with stainless steel flange.(DSR 18.15) 100mm(DSR 18.15.2)

Providing, installation, testing and commissioning osstainless steel Y-Stainer fabricated out of 1.6 mmm thick stainless steel, 304grade sheet with 3mm dia holes with stainless steel flange.(DSR 18.15) 250mm(DSR 18.15.5)

Providing, installation, testing and commissioning osstainless steel Y-Stainer fabricated out of 1.6 mmm thick stainless steel, 304grade sheet with 3mm dia holes with stainless steel flange.(DSR 18.15)300mm(DSR 18.15.6)

Supply, Insallation testing and commissioning of Main Fire Panel (Single front,fixed type,1.6mm. Indoor) As per IS : 8623 Part -1 Bolted construction fabricated on imported CNC Turret punch press and bending press and high quality laser cut machines ( make AMADA , Japan ). Powder Coating - Minimum 60-80 micron of approved shade. EPDM gasket of appropriate shape and size provided at all joints , doors and covers to make panels dust and vermin proof. TPN Aluminium Electrolytic Grade busbar shall be provided ,dully supported on SMC / DMC ,busbar supports and insulated with colour coded heat shrinkable sleeve. Including 20mtr sizes of XLPE armoured aluminum conductor power cable of 1.1 KV grade , MS perforated cable trays 2O Mtr, GI strips, GI earth plates, GI wire, GI pipe, Bras compression glands and copper lugs to complete the system as required

Supplying, installation, testing and commissioning of Curtain Pump Model Kirloskar - DBxe 80/20 and equivalent, suitable for automatic operation and consisting of following : Horizontal end sunction,multistage,centrifugal pump of 2900 RPM, stage-1 coupled with 45 kW, 3Ph, 2900 RPM, IE2 efficiency motor (TEFC Sq. Cage, IP55, Class F, 415V ±10%), complete with base frame, coupling, and accessories. MOC: Casing – Cast Iron, Impeller – Bronze, Shaft – SS410, Seal – Mechanical. hortizonatal foot mounted type with class `F` insulation,confirming to IS: 325.M.S.fabricated common base plate, coupling guard, foundation bolts painted with the post office red colouretc as required.suitable cement concrete foundation duly plastered with anti vibration pads. , complete in all respects, as required : 2850lpm 60 m Head

Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects Horizontal type multistage Split Casing Pump, capacity 2850 LPM at 120 m head, Model Kirloskar - DSM 125/40 and equivalent, 2 stages, coupled with 6R1080TA, 156 BHP, radiator cooled diesel engine, 1500 RPM water cooled with radiator and confirming to relevant IS standard complete with autostarting mechanism, 24V starting system, complete with fuel tank, base frame, coupling, and accessories. MOC: Casing – Cast Iron, Impeller – Bronze, Shaft – SS410, Seal – Mechanical, exhaust pipe extended upto required height duly insulted with 50mm thick glass wool with 1mm aluminium sheet cladding,residebital silencer,instruments and protection as per standard specification,stop solenoid for auto stop in the ecent of fault with audio indication, painted with the post office red colour etc as required, M.S fabricated,common base plate coupling,coupling guard, Rcc foundation with bolts as required : 2850 lpm at 120 m Head

Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal,Split Casing Pump, capacity 2850 LPM at 120 m head, Model Kirloskar- DSM 125/40 and equivalent, 2 stages, coupled with 110 kW, 3Ph, 1450 RPM, IE2 efficiency motor (TEFC Sq. Cage, IP55, Class F, 415V ±10%), complete with base frame, coupling, and accessories. MOC: Casing – Cast Iron, Impeller – Bronze, Shaft – SS410, Seal confirming to IS : 1520.– Mechanical horizontal foot mounted type with Class-`F` insulation, conforming to IS-325. (c) M.S. fabricated,Common base plate, coupling, coupling guard, foundation bolts painted with the post office red colour etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads as required: 2850 LPM at 120 m head

Supplying, installation, testing and commissioning of electric driven pressurisation pump Model Kirloskar - RKB 40/14H and equivalent, suitable for automatic operation and consisting of following Horizontal multistage,centrifugal pump of 2900 RPM, cast iron body and bronze impeller with the stainless steel shaft,mechanical sealconfirming to IS : 1520.4 stages, coupled with 7.5 kW, 3Ph, IE2 efficiency motor (TEFC Sq. Cage, IP55, Class F, 415V ±10%), complete with base frame, coupling, and accessories. MOC: Casing – Cast Iron, Impeller – Bronze, Shaft – SS410, Seal – Mechanical, hortizonatal foot mounted type with class `F` insulation,confirming to IS: 325.M.S.fabricated common base plate, coupling guard, foundation bolts etc as required.suitable cement concrete foundation duly plastered with anti vibration pads. , complete in all respects, as required : (Jockey Pump) : 180 lpm at 120 m Head

Supplying, installation, testing and commissioning of Jockey Pump Horizontal Split Casing Pump, capacity 180 LPM at 60 m head, Model Kirloskar RKB 32/14H and equivalent, 3 stages, coupled with 5.5 kW, 3Ph, 2900 RPM, IE2 efficiency motor (TEFC Sq. Cage, IP55, Class F, 415V ±10%), complete with base frame, coupling, and accessories. MOC: Casing – Cast Iron, Impeller – Bronze, Shaft – SS410, Seal – Mechanical.hortizonatal foot mounted type with class `F` insulation,confirming to IS: 325.M.S.fabricated common base plate, coupling guard, foundation bolts painted with the post office red colour etc as required.suitable cement concrete foundation duly plastered with anti vibration pads. , complete in all respects, as required: 180lpm 60 m Head

Bidder Name

Amount

the hisar mahabir colony co-op l/c society ltd (GSTN-06AAGAT2410A1Z7) BID ID -1380605

THE DISIKA CO-OP LC SOCIEY LIMITED (GSTN-06AAHAT9401E1ZL) BID ID -1380898

THE DISIKA CO-OP LC SOCIEY LIMITED (BID ID -1380898)

THE DISIKA CO-OP LC SOCIEY LIMITED (BID ID -1380898)