Loading
Loading…
Loading…
Tender Value
₹3.3 Cr
EMD Value
₹3.2 L
Closing Date
27 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
+ Capital Works)
S AND T
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB of SGCC, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing.
Defination of Similar Work :- "Trenching cable laying location and signal foundation/erection/termination/wiring in connection with any signaling work." OR "Any indoor or combined Indoor/ Outdoor Signaling work including Supply, Installation, Testing and commissioning of Relay Interlocking (RRI/PI) system for passenger carrying lines".
6 conditions · 4 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The bid must comply technical conditions of tender.
Signalling work in connection with safety Fencing along the track and Provision of 06 Subway at BSL-BD & BSL-KNW in BSL Division.
BSL-N-SNT-54-2025-26
BSL-N-SNT-54-2025-26
Open
Works - General
15 Months
Jalgaon, Maharashtra
₹0
₹3.2 L
27 Mar 2026
3 Mar 2026
13 Mar 2026
219 items across 6 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 38,95,425.39 | ||
| — | 1.00 | — | — | ||
| Supply of PVC Flexible Copper Cable, Single core, multi strand 1x2.5 sq mm(50 conductor each dia 0.25 + /- 0.01) as per specn IRS 694/2010 with latest amendment. If any with insulation thickness of 0.70 mm nominal conductor resistance 7.98 ohms /km and test parameters are as per (S)76/89 (Amdt .3). (Inspection By RITES) | — | — | — | 40,898.16 | |
| — | 70.00 | — | — | ||
| Supply of FIBRE GLASS INSULATING FIRE RETARDENT SHEET of 10 mm THICKNESS AS PER ISO:10192-1982,Dielectric strength -25KV/mm with glass content 25 to 34%, in standard size of 1.10x1.10Mtr.as per spec.No.IS:10192-1982 (Inspection By Consignee) | — | — | — | 3,40,392.5 | |
| — | 8000.00 | — | — | ||
| Supply of ARA Terminal blocks with links made of PBT Specn No.IRS/75/2006(Rev - 2) with latest amendments and RDSO Drg.No.SA-23741 Alt.4., SA-23745 Alt 5, SA-23746, SA-23748 Alt -4 & SA-23756 Alt-3. (Inspection By RDSO) | — | — | — | 5,32,957.4 | |
| — | 150.00 | — | — | ||
| "Supply of cartridge fuse block made of PBT as per RDSO Drg No SA-23748 Alt 4,SA- 23749 & Spec No IRS S 75/2006 with latest Amendment. Fuse block shall be suitable for round head type voltage fuses." (Inspection By RDSO) | — | — | — | 22,424.62 | |
| — | 150.00 | — | — | ||
| Supply of round head type non detoriating type low voltage cartridge fuse as per Specn No IRS/S/78/92 with latest amendments2A/4A/6A capacity (Inspection By RDSO) | — | — | — | 9,651.64 | |
| — | 80.00 | — | — | ||
| Supply of Tik-tak, piano type switches,5 A (As per IS specification). (Inspection By Consignee) | — | — | — | 2,452.29 | |
| — | 80.00 | — | — | ||
| Supply of Lamp 110V/24W,2 Pin for Loc. (Inspection By Consignee) | — | — | — | 1,668.38 | |
| — | 40.00 | — | — | ||
| Supply of Apparatus Case with godown locks with deatachable handle on both the doors. A) Single Case as per Drg No SK 783-1&2. with latest alteration. (Inspection By RITES) | — | — | — | 5,87,935.83 | |
| — | 40.00 | — | — | ||
| Supply of Apparatus Case with godown locks with deatachable handle on both the doors.B) Half Case as per Drg No SK 783-1&2. with latest alteration.(Inspection By RITES) | — | — | — | 4,71,739.6 | |
| — | 80.00 | — | — | ||
| Supply of earth electrode assembly as per Drg.No.CR/S&T/SK/815 (Inspection By Consignee) | — | — | — | 79,131.07 | |
| — | 40.00 | — | — | ||
| SUPPLY OF Maintenance Free Earth As per RDSO/SPN/197/2008 or latest consisting of :1) Copper bond steel electrod 3 Mtr long 17 mm dia with copper bonding thickness of min.250 micron & UL listed & marked -01 No 2) Earth enhancement compound RDSO Approved in sealed bag of 10Kgs-03 No 3) Copper strip 150x25x6 mm -02 No 4) Copper strip 300x25x6 mm -01 mm 5)35 Sqmm Copper Cable to connect earth electrod to MEEB-15 Mtr Approx. If required , additional earth enhancement compound shall be provided free of cost to ensure earth value below 01 ohm. (Inspection By RDSO) | — | — | — | 6,52,758.31 | |
| — | 400.00 | — | — | ||
| Supply of 8 SWG GI wire (4mm dia) suitable for track circuit rail bonding .As per IRS specification S:13 - 62 (Inspection by Consignee) | — | — | — | 31,862.94 | |
| — | 200.00 | — | — | ||
| Supply of Hydrometer, Exide make or similar for measuring specific gravity of Battery Graded acid with mounting stand in location Boxes.Consignee inspection under manufacturer certificate. (Inspection by Consignee) | — | — | — | 52,047.94 | |
| — | 42.00 | — | — | ||
| Supply of GI pipe, inner dia. 100mm dia. B-class as per spec. No.IS 1239 PT.1/2004 or latest with sockets and fittings. TATA/JINDAL/ZENITH BIRLA Make.(Inspection By RITES) | — | — | — | 39,664.85 | |
| — | 42.00 | — | — | ||
| Supply of DWC HDPE Pipe with one snap fit coupler and 'O' ring fire resistant, anti rodent,in 6mtr length of size 120 mm outer dia as per RDSO /SPN /204/2011/Ver 1.1 with Amdt 1 or latest. (Inspection By RDSO) | — | — | — | 12,386.31 | |
| — | 600.00 | — | — | ||
| "Supply of RCC pipe half round of size 150mm dia outer and 100 mm dia internal 1 mtr long matching to IS No.458/2003 amendment-1 with Rev.4." (Inspection By RITES) | — | — | — | 1,13,480.07 | |
| — | 600.00 | — | — | ||
| Supply of Modular Terminal block of 2.5 sq mm 2 IN 2 out type disconnect type terminal along with as per RDSO Specn. No. RDSO/SPN/189/2004 Rev 3.0. The current capacity of 16 Amps & more, The terminal should have marking at centre to view description from front. The terminals should have latest push -X technology for easy wiring. Material to be procured from RDSO approved firm only preferably of phoenix make.(Inspection By RDSO) | — | — | — | 64,474.56 | |
| — | 6.00 | — | — | ||
| Supply of DIN channel for the above terminals 1 Mtr each (Inspection By RDSO) | — | — | — | 1,193.1 | |
| — | 50.00 | — | — | ||
| Supply of End plates for modular terminal block (Inspection By RDSO) | — | — | — | 1,073.02 | |
| — | 50.00 | — | — | ||
| Supply of End clamp for modular terminal block (Inspection By RDSO) | — | — | — | 771.16 | |
| — | 6.00 | — | — | ||
| "Tool bag complete with Megger as per Annexure -VIII. ADD AC /DC clamp meter , with Hand Held Tool Bag." (Inspection by Consignee) | — | — | — | 2,87,435.15 | |
| — | 200.00 | — | — | ||
| Supply of thermo shrink Jointing kit (Reinforced) TSF-2 type generally conforming to R D S O Specification No.RDSO/SPN/TC/57/2015 Rev 1 with modified kit contents as per CSTE Specification No.CR/SPN/TC/57 (A)/2015 dtd 06.01.2015(Table -A) to be suitable for jointing both 10/20/50 pair PIJF and 4/6 Quad cables along with sub-kit(Table-B) for armour continuity. (Inspection By RDSO) | — | — | — | 5,49,026.49 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
14.05.2024AnnexureV.pdf
ATTACHMENT
GCC_April-2022_2022__POLICY_27_04_22.pdf
ATTACHMENT
GCC-April2022_merged20.05.2024.pdf
ATTACHMENT
Annexure A
ATTACHMENT
Railway Drawings SOR
ATTACHMENT
TenderDocu54-25-26_1.pdf
ATTACHMENT
Annexure-ASafety-CriticalSignalingItemsbyRDSORSDte26.09.2025.1.pdf
ATTACHMENT
C.RLYDRAWINGANNEXURES-SORST-20211_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .