Provision of New Relay Hut and OFC Room at Junction point RGB Station of Moradabad Division. & Heavy repair to Nallah/drainage at RG colony and boundary wall work at RG under ADEN/CH.

Item Breakup - A-DSR Items

local sand, with common burnt clay non modular bricks. Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) 11.3 finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone Sqm 97 545 52865 2 aggregate 11.37S CERAMIC GLAZED TILES MORADABAD DIVISION-ENGINEERING/NORTHERN RLY 11.37 Providing and laying Ceramic glazed floor tiles Sqm 5 935.6 4678 of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 3 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 11.37A Providing and fixing 1st quality ceramic glazed Sqm 5 938.5 4692.5 floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, 4 risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 11.41S VITRIFIED FLOOR TILES Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with 11.41A grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of 11.41A.1 size 5 11.41A.1.1 Size of Tile 600 x 600 mm Sqm 28 1286.6 36024.8 Total 619636.60 Item- 8 All items of DSR ch. No - 12(Roofing) S No. Item No Description of Item Unit Qty Rate Amount 12.0 ROOFING Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry 12.40 surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately): Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 12.41 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 1 12.41.2 110 mm diameter Metre 538 319.75 172025.5 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes 12.42 conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.4 Single tee without door 2 12.42.4.2 110x110x110 mm Each 50 190.75 9537.5 12.42.5 Bend 87.5 degrees 3 12.42.5.2 110 mm bend Each 75 132 9900 MORADABAD DIVISION-ENGINEERING/NORTHERN RLY 12.42.6 Shoe (Plain) 4 12.42.6.2 110 mm Shoe Each 3 115.95 347.85 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of 12.43 required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 5 12.43.2 110 mm Each 5 309.5 1547.5 Total 193358.35 Item- 9 All items of DSR ch. No - 13(Finishing) S No. Item No Description of Item Unit Qty Rate Amount 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 1 13.1.2 1:6 (1 cement: 6 fine sand) Sqm 1100 282 310200 13.4S CEMENT PLASTER (IN COARSE SAND) 13.4 12 mm cement plaster of mix : 2 13.4.2 1:6 (1 cement: 6 coarse sand) Sqm 1410 294.35 415033.5 13.25 Extra for plastering: 13.26 Providing and applying plaster of paris putty of Sqm 1100 214.3 235730 2 mm thickness over plastered surface to 3 prepare the surface even and smooth complete. 13.44S EXTERIOR FINISHING Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 13.48A 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 13.48A.1 New work (Two or more coats applied @ 1.43 Sqm 565 154.45 87264.25 4 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Applying priming coats with primer of 13.85 approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 13.90 grams/ litre of approved brand and manufacture to give an even shade : 5 13.90.1 Old work (one or more coats) Sqm 1975 56.8 112180 Wall painting with plastic emulsion paint of 13.98 approved brand and manufacture to give an even shade: 6 13.98.1 One or more coats on old work Sqm 1410 90.85 128098.5 Painting with synthetic enamel paint of 13.99 approved brand and manufacture of required colour to give an even shade : 7 13.99.1 One or more coats on old work Sqm 880 86.55 76164 Finishing walls with water proofing cement 13.109 paint of required shade : 13.109.2 Old work (one or more coats @ 2.20 kg/10 Sqm 820 63.25 51865 8 sqm) complete. Total 1416535.25 Item- 10 All items of DSR ch. No - 14(Repairs to building) S No. Item No Description of Item Unit Qty Rate Amount 14.0 REPAIRS TO BUILDING 14.26S WOOD WORK MORADABAD DIVISION-ENGINEERING/NORTHERN RLY 14.34 Providing and fixing 150 mm bright finished Each 2 233.1 466.2 floor brass door stopper with rubber cushion, 1 necessary brass screws etc. to suit shutter thickness complete Total 466.20 Item- 11 All items of Ch.15 (dismentling ) of DSOR-2021 (Except banned item) S No. Item No Description of Item Unit Qty Rate Amount 15.0 DISMANTLING AND DEMOLISHING Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c cum 57 2007.1 114404.7 1 equivalent design mix) Total 114404.70 Item- 12 All items of DSR ch. No - 17 (Sanitary installations ) S No. Item No Description of Item Unit Qty Rate Amount 17.0 SANITARY INSTALLATIONS Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush 17.2 pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic Each 3 5540.55 16621.65 1 seat and lid Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm 17.7 C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 Each 2 2275 4550 2 mm with a pair of 15 mm C.P. brass pillar taps Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, 17.10 including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 3 17.10.1.1 510x1040 mm bowl depth 250 mm Each 2 6008.45 12016.9 Total 33188.55 Item- 13 All items of DSR ch. No - 18(Water supply) S No. Item No Description of Item Unit Qty Rate Amount 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making 18.10 good the walls etc.-Internal work - Exposed on wall 1 18.10.1 15 mm dia nominal bore Metre 28 304.15 8516.2 2 18.10.2 20 mm dia nominal bore Metre 28 373.35 10453.8 Providing and fixing G.I. pipes complete with 18.12 G.I. fittings including trenching and refilling etc.-External work 3 18.12.1 15 mm dia nominal bore Metre 29 267.5 7757.5 4 18.12.2 20 mm dia nominal bore Metre 28 315.35 8829.8 5 18.12.3 25 mm dia nominal bore Metre 28 417.95 11702.6 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : MORADABAD DIVISION-ENGINEERING/NORTHERN RLY 18.21.2 45 cm length 6 18.21.2.1 15 mm nominal bore Each 7 85.2 596.4 Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet : 7 18.22.1 100 mm diameter Each 6 166.35 998.1 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Litre 1131 9.7 10970.7 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking 8 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of approved 18.54 quality and colour. 18.54.1 15mm nominal bore, 86 mm long, weighing Each 5 109.85 549.25 9 not less than 88 gms Total 60374.35 Item- 14 All items of DSR ch. No - 19 (Drainage) S No. Item No Description of Item Unit Qty Rate Amount 19.0 DRAINAGE Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover 19.4 with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed 19.6 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 1 19.6.2 150 mm dia. R.C.C. pipe Metre 90 493.1 44379 Extra for depth beyond 45 cm of brick masonry 19.31 chamber : Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of 19.35 cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 2 19.35.1 450 mm dia RCC pipes. Metre 90 2385.5 214695 3 19.35.2 600 mm dia RCC pipes. Metre 90 3051.55 274639.5 Total 533713.50