REPAIR / REPLACEMENT / RECANNING AND PAINTING OF WOODEN AND STEEL FURNITURE AT AF STN PANAGARH

Amount

Removing/taking out carefully old unserviceable worn out/components parts of the following wooden furniture and M&L of the same as listed below with new materials/components, made to finishing to receive polish all as specified, directed and shown on drawing.

CHIAR EASY WOODEN (Drg No FD-229)

Front leg made out of 2nd class HW all as specified.

Front Rail of seat frame with necessary holes for canning made out of 2nd class HW all as specified.

Side Rail of seat frame with necessary holes for canning made out of 2nd class HW all as specified.

Back Rail of seat frame with necessary holes for canning made out of 2nd class HW all as specified.

Top Rail of back rest with necessary holes for canning made out of 2nd class HW all as specified.

Side Rail of back rest with necessary holes for canning made out of 2nd class HW all as specified.

Bottom Rail of back rest with necessary holes for canning made out of 2nd class HW all as specified.

Front Rail stiffener made out of 2nd class HW all as specified.

Arm rest made out of 2nd class HW all as specified.

Taking old worn out/damaged existing cane from chairs cleaning of caning holes without damaging the furniture & recanning of the same with white coloured new cane of 2mm width plastic half oval shape cane best quality beading with 4mm width plastic half oval shape cane (Godrej pattern) as shown in drawing.

CHAIR WRITTING (Drg No FD-20 (M)/280)

Front leg made out of 2nd class HW all as specified.

Rear leg made out of 2nd class HW all as specified.

Front Rail with necessary holes for canning made out of 2nd class HW all as specified.

Side Rail with necessary holes for canning made out of 2nd class HW all as specified.

Back Rail with necessary holes for canning made out of 2nd class HW all as specified.

Long Stiffener made out of 2nd class HW all as specified.

Back rest batten made out of 2nd class HW all as specified.

Arm rest made out of 2nd class HW all as specified.

Taking old worn out/damaged existing cane from chair cleaning of caning holes without damaging the furniture & recanning of the same with white coloured new cane of 3mm width plastic half oval shape cane (Godrej pattern) as shown in drawing.

CHIAR DINNING (Drg No FD-279)

Front leg made out of 2nd class HW all as specified.

Rear leg made out of 2nd class HW all as specified.

Front Rail of seat frame with necessary holes for canning made out of 2nd class HW all as specified.

Side Rail of seat frame with necessary holes for canning made out of 2nd class HW all as specified.

Back Rail of seat frame with necessary holes for canning made out of 2nd class HW all as specified.

Short stiffener made out of 2nd class HW all as specified.

Back rest batten made out of 2nd class HW all as specified.

Taking old worn out/damaged existing cane from chairs cleaning of caning holes without damaging the furniture & recanning of the same with white coloured new cane of 2mm width plastic half oval shape cane best quality beading with 4mm width plastic half oval shape cane (Godrej pattern) as shown in drawing.

LOCKER WOODEN (Drg No FD-54(M))

Removing of existing worn out u/s shutters and providing/ fixing the new one made out of 18mm thick prelam particle board (one side) alongwith 4mm thick teak wood beading all around in its original position as per drg.

Aluminium 'D' handle 100mm long with steel screw and washer.

Aluminium haps and stapple 75mm with steel screw.

Aluminium rail 18mm dia 300mm long with both end socket fixed with steel screw as per drg.

Removing of old u/s worn out ply wood from the back and providing/fixing with new one made out of 6mm commerical ply wood BWR grade as per drg.

Removing the worn out u/s shelf and providing/fixing the new one made out of well seasoned Teak wood 25mm and fixing the same in its original position as per drg.

Removing the worn out existing u/s top and providing the new one of existing size and shape made out of 1st class Teak wood 25mm th.

PEG TABLE (Drg No FD-227)

Removing the existing unserviceable broken top of table & supply & fix new table top 18mm thick particle board commercial type exterior grade phynoil bonded with 1mm thick plastic laminated sheet on top incl providing 4mm thick second class hard wood beading all round table top incl French polishing all as specified and shown on drg.

Remove the existing u/s leg from peg table and S &F new leg made out of well seasoned teak wood of existing size and shape all as shown on drawing.

Removing the existing u/s broken long rail and supply & fixing second class hard wood top rail 50 X 25mm all as specified & shown on drg.

Removing the existing u/s broken short rail and supply & fixing second class hard wood short rail 50 X 25mm all as specified & shown on drg.

TABLE CENTRE (Drg No FD-274)

Removing the existing unserviceable broken top & supply & fixing new table top 18mm thick particle board commercial type exterior grade phynoil bonded with 1mm thick plastic laminated sheet at the top, size of top 900mm X 450mm incl providing 4mm thick second class hard wood edging all round incl French polishing all as specified and shown on drg.

Removing the u/s broken leg and supply & fixing second class hard wood leg 45mm X 25mm all as specified & shown on drg.

Removing the existing u/s broken long rail and supply & fixing second class hard wood top rail 50 X 25mm all as specified & shown on drg.

Removing the existing u/s broken short rail and supply & fixing second class hard wood short rail 50 X 25mm all as specified & shown on drg.

TABLE COMPUTER MAKE Godrej MODEL NO-PCH 50021

Removing the existing unserviceable broken top & supply & fixing new table top 18mm thick particle board commercial type exterior grade phynoil bonded with 1mm thick plastic laminated sheet at the top, size of top 980mm X 450mm all as specified and shown on drg.

Removing the u/s broken wheels and supply & fixing the same as specified & shown on drg.

Removing the existing unsv/broken sides of Table compute side and supply and fix new sides of prelaminated particle board exterior grade phynoil bonded with 1mm thick plastic laminated sheet at the top of 18mm thick one side Teak face and one side balancing white all as specified and shown on drg.

Removing the existing unserviceable broken key board drawer& supply & fixing new one of 18mm thick particle board commercial type exterior grade phynoil bonded with 1mm thick plastic laminated sheet at the top, size of top 400mm X 300mm with rolling buttons all as specified and shown on drg.

COMPUTER CHAIR MAKE- GODREJ, MODEL NO-PCH 50021

Removing the u/s broken wheels push type and supply & fixing the same as specified & shown on drg.

Removing the u/s broken Hydraulic system and supply & fixing the same as specified & shown on drg.

Removing the u/s broken Arms Rest and supply & fixing the same as specified & shown on drg.

Removing the u/s broken base and supply & fixing the same as specified & shown on drg.

TABLE 900x600 W/O DRAWER (Drg No FD-232)

Removing/taking out carefully old unserviceable worn out/components parts of the following wooden furniture, the same as listed below with new materials/components, made to finishing to receive varnish if necessary to bring out the new serviceable condition shown on drawing.

Leg made out of 2nd class HW all as specified.

Front rail made out of 2nd class HW all as specified.

Side rail made out of 2nd class HW all as specified.

Long Stiffener made out of 2nd class HW all as specified.

Short Stiffener made out of 2nd class HW all as specified.

Removing existing worn out u/s top and providing/fixing the new one made cut of particle board 18mm thick one side laminate of size 900x600mm with teak wood beading 4mm thick all around in its original position with required screws.

TABLE 900x600 WITH DRAWER (Drg No FD-223)

Removing/taking out carefully old unserviceable worn out/components parts of the following wooden furniture and M&L of the same as listed below with new materials/components, made to finishing to receive paint including welding if necessary to bringout the new serviceable condition all as specified, directed and shown on drawing.

Leg made out of 2nd class HW all as specified.

Side rail made out of 2nd class HW of size 25 mm x130 mm x740 mm all as specified.

Side rail made out of 2nd class HW of size 25 mm x130 mm x440 mm all as specified.

Side rail made out of 2nd class HW of size 25 mm x60 mm x380 mm all as specified.

Removing the worn out u/s following members of the drawer and providing the new one made of 1st class hard wood plank, Teak wood and fixing the same in its original position as shown on drawing.

Track rail of 25 mm x25 mm x450 mm all as specified

Guide rail of 12 mm x12 mm x 450 mm all as specified

Side plank

Front plank

Rear plank

Removing the worn out u/s ply of the drawer and providing the new one of 6mm commercial ply BWR grade make Green ply and fixing in its original position as per drg.

Removing the worn out unservisable ply of the drawer and providing the new one of 6 mm commercial ply BWR grade and fixing the same in its original position all as specified in drawing

Preparation of all exposed wooden surface and removing the existing polish mark by scraping to make the surface clean and smooth with required grade of sand paper and finish with two coat of french polish to bring the surface to a required glossy shine after fixing new hard rubber shoe as directed by engineer-in charge.

TABLE 900 mm x 900 mm (FD-291)

Removing worn out u/s leg and providing new one of existing size and shape made out of 1st class well seasoned HW teak and fixing the same in its original position as per drg.

Removing the worn out u/s top rail long and providing the new one of existing size and shape made out of 1st class HW well seasoned and fixing the same in its original position as per drg.

Removing the worn out u/s side top rail short and providing the new one of existing size and shape made out of 1st class HW well seasoned and fixing the same in its original position as per drg.

Removing the old u/s top and providing the new one made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on table in its original position as per drawing and providing new hard rubber shoes to the legs.

Preparation of surface by removing of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge.

TABLE DINING 1200 mm x 900 mm x 760 mm (Drg No FD- 291)

Removing worn out u/s leg and providing new one of existing size and shape made out of 1st class well seasoned HW teak and fixing the same in its original position as per drg.

Removing the worn out u/s top rail long and providing the new one of existing size and shape made out of 1st class HW well seasoned and fixing the same in its original position as per drg.

Removing the worn out u/s side rail short and providing the new one of existing size and shape made out of 1st class HW well seasoned and fixing the same in its original position as per drg.

Removing the old u/s top and providing the new one made out of 18 mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on table in its original position as per drawing and providing new hard rubber shoes to the legs.

Preparation of surface by removing of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge.

TEA POY (Drg No FD-227)

Remove the existing u/s top from teapoy and supply and fix new top made out of 18 mm particle board with plastic laminated sheet 1.5 mm thick size 600 X 450 mm with 4 mm thick teak wood edging all around the top all as shown on drg.

Removing the existing u/s broken long rail and supply & fixing second class hard wood top rail 50 X 25mm all as specified & shown on drg.

Removing the existing u/s broken short rail and supply & fixing second class hard wood short rail 50 X 25mm all as specified & shown on drg.

Remove the existing unservicable leg from teapoy and Supply and fixing new leg made out of 2nd class hard wood of existing size and shape all as shown on drawing.

CHAIR VERANDAH (Drg No FD-256)

Removing the unservicable broken rubber shoes of chair varandah and supply and fixing the same as specified and shown in drawing

Taking old worn out/damaged existing cane from chairs, making the frame by means of welding wherever required to bring its in original shape, cleaning of caning holes without damaging the furniture & recanning of the same with white coloured new cane of 2mm width plastic half oval shape cane best quality beading with 4mm width plastic half oval shape cane (Godrej pattern) as shown in drawing.

CHAIR CB STEEL WITH ARM (Drg No FD-75(M))

Removing the worn out u/s cleats and providing/fixing the new cleats made out of flat iron 25x3x40mm duly welded in seat frame as directed by Engr-in-Charge.

Removing the worn out u/s seat frame and providing/fixing the new one of existing size made out of 1st class teak wood duly re-caning with new plastic cane 2mm thick oval shape for general weaving and 4mm thick plastic cane for beading all around as show in drg. Wooden frame should be finished with black polish and fix in its original position with required screw

All as per Srl No 16.02 but for back frame.

Removing the worn out u/s handle made out of Iind class HW well seasoned and providing/fixing of exisiting size and shape with required screw after finish with black polish.

CHAIR CB STEEL W/O ARM (Drg No FD-75(M))

All as per Srl No 16.01 but for chair CB steel w/o arm.

All as per Srl No 16.02 but for chair CB steel w/o arm.

All as per Srl No 16.03 but for chair CB steel w/o arm.

ALMIRAH STEEL LARGE (Drg No FD-67(M)/1031)

Taking out of broken door shutter and re-fixing the same existing door shutters in original position with pin type new steel hinges(02 Nos) of existing size duly welded as required including denting .

Removing the worn out u/s handle from the almirah and supply and fixing of new handle chromium plated best quality as approved by Engr-in-Charge/GE.

Removing the worn out u/s lock from almirah and supply & fixing with new lock 6 lever with duplicate key ISI marked Godrej with round shape of MS key plate as approved by Engr-in-Charge/GE duly fixed as shown in drawing.

Removing the worn out u/s 3 way locking device and supply & fixing the new 3 way locking device in its original position as shown in drg.

Removing the worn out u/s leg and supplying/fixing the new leg made out of PBI sheet 20 gauge in its original position duly welded as shown in drg.

Taking out of loose shelves of almirah and re-fix the same in its original position with new MS cleat as per drg.

Taking out of u/s worn out shelf and supplying the new shelf of existing size and shape made out of PBI sheet 20 gauge.

ALMIRAH STEEL SMALL (Drg No FD-1032

All as per Srl No 18.01 but for almirah steel medium.

All as per Srl No 18.02 but for almirah steel medium.

All as per Srl No 18.03 but for almirah steel medium.

All as per Srl No 18.04 but for almirah steel medium.

All as per Srl No 18.05 but for almirah steel medium.

All as per Srl No 18.06 but for almirah steel medium.

All as per Srl No 18.07 but for almirah steel medium.

ALMIRAH STEEL MEDIUM (Drg No FD-1032

All as per Srl No 18.01 but for almirah steel medium.

All as per Srl No 18.02 but for almirah steel medium.

All as per Srl No 18.03 but for almirah steel medium.

All as per Srl No 18.04 but for almirah steel medium.

All as per Srl No 18.05 but for almirah steel medium.

All as per Srl No 18.06 but for almirah steel medium.

All as per Srl No 18.07 but for almirah steel medium.

CHARPOY GI PLY TOP (Drg No FD-220)

S&F GI Charpoy Long Rail of GI Pipe 32mm Bore (dia) Medium Grade duly Threaded Both Ends upto the required Length and fitted to frame of Charpoy including taking out unserviceable long rail from 3-way elbow by unscrewing, complete all as specified/as shown on Drawing/as directed.

S&F GI CHARPOY LEG made out from LONG RAIL & SHORT RAIL (Retrieved from item No 20.01 & 20.02 here-in-before), duly Threaded one End including 2 No Mild Steel Flat Iron 20x3mmClamps and providing Mild Steel Flat iron or Washer to Bottom of Mild Steel Clamps, Welded to Leg and treated with one coats of black paint over a Coat of Red Oxide Zine Chrome Primer including Taking out unserviceable LEG by unscrewing from 3 way Elbow, completea all as specified/as shown on Drawing/as directed.

S&F GI ELBOW 3-WAY, ISI Marked suitable for GI Pipe 32mm Bore (dia) of GI CHARPOY including Taking out unserviceable GI ELBOW from the Frame, complete all as specified/as shown on Drawing/as directed.

S&F GI CHECK NUT, ISI Marked suitable for GI Pipe 32mm Bore (dia) of GI CHARPOY including Taking out unserviceable GI Elbow from the Frame, complete all as specified/as shown on Drawing/as directed.

Removing the existing u/s ply wood from charpoy GI and supply and fix new plywood 12 mm thick BWR ISI mark. Make:Green Ply/kitPly/ Century Ply

Supply and fix GI charpoy short rail made out from long rail (retrieved from item no 20.01 here in before), duty cut and treated both ends upto the required length and fitted including taking out unserviceable SHORT RAIL by unscrewing from 3 way Elbow, complete all per shown on drawing

BED HARD PLY TOP (Drg No FD-246), (21(M))

Removing of worn out unservicable plywood from both side of head board frame of bed. Providing and fixing with new plywood 3 mm thick one side teak face on the both side existing head board with 4mm thick beading all around made out of teak wood.

All as per item No. 22.01 here-in-before but for foot board.

Removing of worn out unserviceable legs from and providing/fixing with new legs in its original position made out of teak wood. Size and shape as per drg.

Removing old u/s worn out long rail from bed and providing/fixing with new long rail in its original position made out of 2nd class hard wood seasoned (Sal wood of size 1980 x 65 x 50 mm)

All as per item No.22.04 here-in-before but short rail of size 900x65x50mm.

Removing worn out u/s end rail from bed, providing/fixing with new one in its original position made out of sal wood of size 900 x 100 x 40

Removing worn out u/s wooden batten from head board and providing/fixing with new one in its original position made out of soft wood of size 900 x 65 x 19

All as per item No. 22.07 here-in-before but of size 400 mm x75 mm x19 mm.

All as per item No. 22.07 here-in-before but of size 900 mm x135 mm x19 mm .

All as per item No. 22.07 here-in-before but foot board

All as per item No. 22.07 here-in-before but foot board of size 180 mm x75 mm x19 mm.

Removing old worn out U/S ply wood from bed and providing/fixing with new plywood 12 mm thick BWR Make: National/Kitply/Green ply ISI mark

TABLE DRESSING GENTS (Drg No FD-230)

Taking out of existing unserviceable/ broken top of table dressing gents and supply and fix new top prelaminated particle board of 18mm thick one side teak face and one side balancing white all as specified and shown on drg.

Supply and fixing new back made of 6 mm thick BWR grade plywood duly fixed with 02 Nos of key holes including taking out existing back all as specified and shown in drawing.

Removing the existing unserviceable/ broken mirror with frame incl 4mm thick back ply of table dressing gents and supply and fix new mirror frame made of second class hard wood duly fitted with 5.5mm thick new mirror alongwith 4mm thick BWR grade back ply all as specified and shown on drg.

TABLE DRESSING LADIES (Drg No FD-252)

Supply and fixing new top of prelaminated particle board of 18 mm thick one side teak face and one side balancing white including Taking out existing unservicable top of table dressing ladies all as specified and shown in drawing

Supply and fixing new drawer made of 18 mm thick prelaminated particle board and bottom of drawer with 6 mm thick BWR grade plywood duly fixed with Aluminium anodised knob 40 mm. Including taking out unservicable drawer. All as specified and shown in drawing.

Supply and fixing new mirror 5.5 mm thick with frame made of 2nd class hard wood duly fitted with 4mm thick BWR grade back ply including taking down unservicable broken mirror with frame and back all as specified and shown in drawing.

TABLE BED SIDE (Drg No FD-276)

Removing and existing unserviceable/broken top of table bed side and supply and fix new top of prelaminated particle board of 18mm thick one side tak face and one side balancing white all as specified and shown on drg.

Removing the existing unserviceable/broken sides of table bed side and supply and fix new sides of prelaminated particle board of 18mm thick one side teak facd and one side balancing white all as specifed and shown on drg.

Removing the existing unserviceable/broken shelves of table bed side and supply and fix new back of 6mm thick BWR grade plywood all as specified and shown on drg.

Removing the existing unserviceable/broken shelves of table bed side and supply and fix new back of 6mm thick BWR grade plywood all as specified and shown on drg.

TABLE DINING 08 PERSONS (Drg No FD-239/ 273)

Supply and fixing new top of prelaminated particle board of 18 mm thick one side teak face and one side balancing white duly edging all around with 6mm thick 2nd class hard wood beadind including Taking out existing unservicable top of table dining all as specified and shown in drawing

supply and fixing new long rails made of 2nd class hard wood icluding taking out unservicable long rails. All as specified and shown in drawing.

supply and fixing new short rails made of 2nd class hard wood icluding taking out unservicable short rails. All as specified and shown in drawing.

Remove the existing unservicable legs from table dining 08 pers and Supply and fixing new leg made out of 2nd class hard wood of existing size and shape all as shown on drawing.

SOFA SET 05 SEATER WITH CUSHIONS (Drg No FD-373

Removing of wornout U/S rails of size 35mm x 100mm in section of 1st class HW

Removing of wornout legs of and providing and fixing the new legs of size 35 mm x 70mm if 1st class Hard wood

Removing the old u/s wornout cushion of 100 mm thick of 40 density for single seater of make (Sleep well/Kurlone)

As per item No 27.03 above (Single seater cushion) but for 3 seater

Removing the old unserviceable wornout / torn out velvet cloth of superior quality as approved by GE for single seater

All as per 27.05 above (single seater velvet cloth cover) but for 03 seater

TABLE DINING 06 PERSONS (Drg No FD- 273)

Removing worn out u/s leg and providing new one of existing size and shape made out of 1st class well seasoned HW teak and fixing the same in its original position as per drg.

Removing the worn out u/s top rail long and providing the new one of existing size and shape made out of 1st class HW well seasoned and fixing the same in its original position as per drg.

Removing the worn out u/s side rail short and providing the new one of existing size and shape made out of 1st class HW well seasoned and fixing the same in its original position as per drg.

Removing the old u/s top and providing the new one made out of 19mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on table in its original position as per drawing and providng new hard rubber shoes to the legs.

Preparation of surface by removing of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge.

Table office clerk steel (Drg No FD- 1004)

Removing the old u/s top and providing the new one made out of 19mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on table in its original position as per drawing and providing new hard rubber shoes to the legs.

Removing the worn out u/s lock from table and supply & fixing with new lock 6 lever with duplicate key ISI markedGod rej with round shape of MS key plate as approved by Engr-in-Charge/GE duly fixed as shown in drawing.

Table office officer steel (Drg No FD- 1003)

Removing the old u/s top and providing the new one made out of 19mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on table in its original position as per drawing and providing new hard rubber shoes to the legs.

Removing the worn out u/s lock from table and supply & fixing with new lock 6 lever with duplicate key ISI markedGod rej with round shape of MS key plate as approved by Engr-in-Charge/GE duly fixed as shown in drawing.

Table 900 mm x 600 mm steel with drawer (Drg No FD- 1008)

Removing the worn out u/s top and providing the new one made out of 19 mm thick particle board one side laminated exterior grade with 4 mm teak wood beading all around and fixing the same on table in its original position as per drawing and providing new hard rubber shoes to the legs.

Removing the worn out u/s lock from table and supply & fixing with new lock 6 lever with duplicate key ISI markedGod rej with round shape of MS key plate as approved by Engr-in-Charge/GE duly fixed as shown in drawing.

Charpoy IP PLY TOP

Removing the existing u/s ply wood from Charpoy IP ply top and supply and fix new plywood 12 mm thick BWR ISI mark.

Removing the u/s rubber shoes all as specified and shown on drawing.

BED HARDPLY TOP (Drg No FD/E6/MAP/08R)

Removing the existing u/s ply wood from Charpoy IP ply top and supply and fix new plywood 12 mm thick BWR ISI mark.

Removing the u/s rubber shoes all as specified and shown on drawing.

Chair Writing (Drg No FD/E6/Map/12)

Removing the u/s broken Arms Rest and supply & fixing the same as specified & shown on drg.

Removing the u/s broken back with cushion complete of chair writing and supply & fixing the new back as specified & shown on drg.

Removing the u/s broken base frame of chair writing and supply & fixing the new base frame as specified & shown on drg.

Removing the u/s broken seat with cushin complete of chair writing and supply & fixing the new base frame as specified & shown on drg.

Removing the old u/s worn out/torn out cloth of chair writing and supply and fixing new superior quality cloth as specified & shown on drg.

POLISHING Removing of all old worn polish, remove /scrapped by caustic soda or by any other means w/o damaged surfaces of furnitre as listed below, making the surface smooth and free from dust and applying high class french polish till glossy shine finish obtained all as specified and as direcred.:-

Chair Writing (Drg No FD- 20(M)/ FD-280)

Chair Easy (Drg No FD- 229)

Chair Dinning (Drg No FD- 279)

Sofa set 05 Seater (Drg No FD Map II/02.

Centre Table (Drg No FD-274)

Peg Table (Drg No FD- 236)

Bed Hard Ply Top W/O FMN Set (Drg No FD-246)

Table Dining 8 Pers (Drg No FD- 273)

Chair Dining with long back (Drg No FD- 357)

Sofa set 5 seater (Drg No FD- 373)

Table 3' x 2' w/o drawer (Drg No FD-232)

TABLE DRESSING GENTS (Drg No FD-230)

Table Dressing ladies with mirror (Drg No FD-252)

Teapoy wooden (Drg No FD-282)

PAINTING M&L preparing extranal and internal surface of following steel furniture including derusting,grinding paste putty ,sanding etc and applying one coat of synthentic enamal paint,with spray paint Ist quality (OG) compressur complete all as specified and shown on drg.NOTE: (i) Rusted poration shall be de rusted and treated with one coat of red oxide primer before applying paint.(ii) Rejoint by welding not exc.100mm in lenghth /Girth (Thickness of metal to be weld not Exc. 6mm) including one coat of synthetic enamal paint over a caot of red oxide primer on effected repaired/welded portion to match with existing :-

Chair Varandah (Drg No FD- 256)

Bed Side Locker Steel (Drg No FD- 1029)

ALMIRAH STEEL LARGE (Drg No FD-1031)

Almirah Steel Medium (Drg No FD- 1032)

Chair CB Steel With Arm (Drg No FD- 75(M))

Chair CB Steel With out Arm (Drg No FD-75(M))

Bed side locker wooden (Drg No FD-54(M))

Almirah Steel Small (Drg No FD-1032)

Almirah large steel 1/2 hanging and shelves (Drg No FD-1033)

Rack Shoe Steel (Drg No FD/E6/Map/02R)

SARASWATI ENTERPRISE (INDEX NO CEEC D-81)