REPAIR/REPLACEMENT AND MAINTENANCE OF INTERNAL WIRING FITTING, MCBS SERVICE CABLE AND OTHERCONNECTED WORKS AT GHATIMORE, KAPRA AND BHALRA AREA AT BHALRA MIL STATION UNDER AGE (I) BHALRA

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants,regulators, sockets, MCBs, DB etc. to be measured separately), removing materials to store for kepping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring complete with cable PVC insulated, unsheathed, 1100V grade conforming to IS for one way SP, 5A with 1.5 Sqmm of cable of nominal area multistranded copper conductor (FRLS) drawn through and including 20 mm PVC Conduit including accessories on wall/floor/ceiling (on surface) etc with 16G MS pressed steel terminal box with 3mm thick laminated sheet cover for mounting switch, socket outlet etc complete with all accessories/fittings including PVC insulated continuous muli standred copper earth wire (1.5 Sqmm) and connected to common earth dolly complete all as specified and directed by Engineer-in-Charge for the following :- (a) One light/holder point or one fan point/ bell point controlled by one switch.

All as per item No 02 here-in-before but one light point contolled by two way switch with 1.5 sq mm copper conductor complete all as specified and directed by Engineer-in-Charge.

All as per item No 02 here-in-before but one 3/5 pin socket otutlet, 5 amps, on same board , with cables 1.5 sq mm size with 1.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing complete all as specified and directed by Engineer-in-Charge.

All as per item No 02 here-in-before but one 3/5 pin socket otutlet, 5 amps, on independent board , with cables 1.5 sq mm size with 1.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing specified and directed.

All as per item No 02 here-in-before but One 5 pin socket out let, 15 Amps, on independent board ,with cables 4 sq mm size with 2.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing specified and directed.

M&L for point wiring with and incl 1.5 sqmm (nominal area) PVC insulated multistranded copper conductor FRLS in and incl PVC casing and caping not less then 20 mm dia with all accessories as required at site incl with its fittings and fixture such as ties, bends, elbows and juction boxes etc with 1.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing and common earth terminal ,One light point controlled by one way switch complete all as specified and directed by Engineer-in-Charge.

All as per item No 07 here-in-before but one 3/5 pin socket otutlet, 5 amps, on same board , with cables 1.5 sq mm size with 1.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing complete all as specified and directed by Engineer-in-Charge.

All as per item No 07 here-in-before but one 3/5 pin socket outlet, 5 amps, on independent board , with cables 1.5 sq mm size with 1.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing specified and directed.

All as per item No 07 here-in-before but One 5 pin socket out let, 15 Amps, on independent board, with cables 4 sq mm size with 2.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing specified and directed.

Supply and fix of LED tube light fittings 1 x 20 watts with LED tube complete, fixinh on recess/surfaces etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible cable of 0.75sqmm 3 core copper conductor from ceiling rose to light fittings complete all as specified and directed by Engineer-in-Charge. Philips/Havells/Bajaj/ Crompton Greaves

Supply and fix of LED Tube light fitting 1X 10 watts with LED Tube complete 2' long, fixingn on recess/surface etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible cable of 0.75sqmm 3 core copper conductor from ceiling rose to light fittings complete all as specified and directed by Engineer-in-Charge.

S & F in replacement 9 Watt LED bulb complete all as specified and directed by Engineer-in-Charge.

S & F in replacement 7 W LED bulb complete all as specified and directed by Engineer-in-Charge.

S&F LED light fitting 1x9W/1x10W bulk head luminaires including LED light driver holder connercting up with three core flexible copper conductor cable of suitable size 230V,50 HZ complete all as specified and directed by Engineer-in-Charge.

Supply and fix of LED Recess mounting 2x2 feet low glare luminaire 30 watt with decorative performance for metalic false ceiling type armstrong/US gypsum or similar ceiling mounting system including LED light. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible cable of 0.75sqmm 3 core copper conductor from ceiling rose to light fittings complete all as specified and directed by Engineer-in-Charge.

S & F in replacement switch piano type 5 A flush button single pole one way complete all as specified and directed by Engineer-in-Charge.

S & F in replacement switch piano type 5 A flush button single pole two way complete all as specified and directed by Engineer-in-Charge.

S & F in replacement socket 2 in 1, 5 Pin, 5 Amp complete all as specified and directed by Engineer-in-Charge.

S & F in replacement Switch socket combination 2 in 1, 5 pin, 5 Amp flush type universal complete all as specified and directed by Engineer-in-Charge.

S & F in replacement Switch socket combination 5 in 1, 3 pin, 5 and 15 amp flush type universal complete all as specified and directed by Engineer-in-Charge.

S & F in replacement ceiling rose, 3 phase/PVC/ Polycarbonate, isolated body complete all as specified and directed by Engineer-in-Charge.

S & F in replacement Bell buzzer ding dong AC 230 Volt, single pole complete all as specified and directed by Engineer-in-Charge.

S & F in replacement bell switch flush type 5 A flush button single pole one way complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCB 6-32 Amps SP 'C' series 240 V, 50 Hz, breaking capacity 10 KA suitable for lighting and other domestic loadscomplete all as specified and directed by Engineer-in-Charge.

S&F inreplacement MCB 20-32 Amps SPN 'C' series240 V, 50 Hz, breaking capacity 10 KA complete all as specified and directed by Engineer-in-Charge.

S&F inreplacement MCB 40 -63 Amps SPN 'C' series240 V, 50 Hz, breaking capacity 10 KA complete all as specified and directed by Engineer-in-Charge.

S & F in replacement MCB Three pole and neutral/FP 40-100 amps, 415V 50 Hz, breaking capacity 10 KA suitable for lighting and other domestic loads complete all as specified and directed by Engineer-in-Charge.

S & F in replacement MCB Three pole and neutral /FP 16-32 amps, 415V 50 Hz, breaking capacity 10 KA suitable for lighting and other domestic loads complete all as specified and directed by Engineer-in-Charge.

S & F in replacement sheet metal enclosure for DBs single door when MCBs to be used Single pole and neutral with 200 Amps rated bus bar 240 V 4 Way complete all as specified and directed by Engineer-in-Charge.

S & F in replacement sheet metal enclosure for DBs double door when MCBs to be used Single pole and neutral with 200 Amps rated bus bar 240 V 4 Way complete all as specified and directed by Engineer-in-Charge.

S & F in replacement sheet metal enclosure for DBs single door when MCBs to be used Single pole and neutral with 200 Amps rated bus bar 240 V 8 Way complete all as specified and directed by Engineer-in-Charge.

S & F in replacement sheet metal enclosure for DBs double door when MCBs to be used Single pole and neutral with 200 Amps rated bus bar 240 V 8 Way complete all as specified and directed by Engineer-in-Charge.

S & F Wiring for circuit/submain wiring in PVC casing caping of size 20/30 mm alongwith earth wire with 2 x 4.0 Sq mm + 1 x 1.5 Sq mm Earth wire in green colour sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required including taking down old UNSV submain wiring complete all as specified and directed by Engineer-in-Charge.

S & F Wiring for circuit/submain wiring in PVC casing caping of size 20/30 mm alongwith earth wire with 2 x 6.0 Sq mm + 1 x 2.5 Sq mm Earth wire in green colour sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required including taking down old UNSV submain wiring complete all as specified and directed by Engineer-in-Charge.

S&F 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire one twin core 10 sq mm solid conductor complete all as specified and directed by Engineer-in-Charge.

S&F 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire one twin core 16 sq mm solid conductor complete all as specified and directed by Engineer-in-Charge.

Dismantling and rewinding of exhaust fan, 230 volts, 50 Hz 450 mm sweep of any make with appropriate gauge super enamled copper winding wire including allied insulation material such as air drying insulation varnish, cotton tapes, lathered film paper, spacers, sleeves etc reassembling at its position after repair, testing and commissioning, complete all as specified and directed by Engineer-in-Charge.

Supply only PVC insulated multistranded FRLS copper conductor of size 1.5 sqmm single core complete all as specified and directed by Engineer-in-Charge.

all as per item 36 above but of size 2.5 sqmm complete all as specified and directed by Engineer-in-Charge.

all as per item 36 above but of size 4.0 sqmm complete all as specified and directed by Engineer-in-Charge.

S&F PVC casing capping medium duty of size 20 mm ISI marked complete all as specified & directed by Engr-in- charge

all as above item no 40 above but of size 25 mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing (concealed flush to wall) factory made VTPN (Vertical type), 4 Way 415V, as per IEC 61439-3, DB (made out of CRCA sheet not less than 1.2mm thick, with copper bus bar rating of suitable capacity, with two neutral bar, 2 earth bar and cable tie for cable management, suitable for MCCB 4 pole upto 125Amp, as incomer and suitable for mounting MCBs as outgoing, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-54 protection class, and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. Note :- MCBs for outgoing shall be measured and paid separately under appropriate item of BOQ.directed.

Supply and fixing in repair MCCBs 125 Amp 4 pole 415 V, adjustable overload settings (0.8 to 1.0) to Ics=100% Icu short circuit setting fixed breaking capacity 25 KA complete all as specified and directed.

S&F in replacement capacitor for ceiling fan of capacity 3.15 mfd complete all as specified & directed by Engr-in- charge

S&F 2 Module five step fan regulator, electronic type, single phase, including connection complete all as specified and directed by Engineer-in-Charge.

S & F in replacement 0.5 Watt LED bulb red/green complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Rechargeable Emergency inverter type with backup of 3 hrs, LED batten light fitting 20 Watts, compact type, LED cool light, 6500K, 2000lm with operating voltage 220 V-240 V, energy efficient, AC, minimum 3 feet long with decorative box linear, including 2 core flexible copper cable from ceiling rose to tubelight complete all as specified and directed by Engineer-in-Charge

S & F in replacement Switch socket combination 2 in 1, 5 pin, 5 Amp flush type universal complete all as specified and directed by Engineer-in-Charge.

S & F in replacement Switch socket combination 5 in 1, 3 pin, 5 and 15 amp flush type universal complete all as specified and directed by Engineer-in-Charge.

S & F in replacement plug Top 5 Amp 3 pin complete all as specified and directed by Engineer-in-Charge.

S & F in replacement plug Top 15 Amp 3 pin complete all as specified and directed by Engineer-in-Charge.

Supply only PVC insulation tape roll for electrical work complete all as specified and directed by Engineer-in-Charge.

M/S MAHALUXMI BUILDERS (BID ID -3386592)

M/S Builders Indias (BID ID -3387368)

SWASTIK TRADERS (BID ID -3388349)

PAWAN KUMAR GOVT. CONTRACTORS (BID ID -3388370)