Construction of Anganwadi Building at Solaganpettai Village in Pullakadamban Panchayat in Thiruvadanai Block

Construction of Anganwadi Building at Solaganpettai Village in Pullakadamban Panchayat

Earth work excavating and depositing on bank with an initial lead of 10M and initial lift of 2m in hard stiff clay stiff block cotton, hard red earth shale's, murrams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil SS 20B for foundation 0-0.30m Depth

Cement concrete 1:4:8 mix usin 40 mm HBGS metal inculding cost and coveyance of all materials to site including labour for mixing ,l aying,curing etc complete.,

Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Supplying filling with filling sand in layers not more than 15 cm thick ,well rammed, wattered and compacted etc,complete

Brick work with cement mortar 1:5 mix using country bricks of size 83/4"x41/4"x2" for foundation and basement and superstructure inculding cost and conveyance of all materiales curing etc ,complete.

Reinforced Cement concrete 1:11/2:3 mix using 20 mm HBGS metal inculding cost and coveyance of all materials to site including labour for mixing ,laying,curing etc complete.,

Supplying and fabrication,placing in position of mild steel or ribbed Tor steel grils for RCC works inculding cost of steel and binding wire etc.

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete.,

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete.,

Weathering Coarse Bricks jelly concrete using 20mm bricks jelly using slacked lime including all meteriyal nd other chareges etc comp Weathering Coarse

Paving the Top of roof with Pressed tiles of size 200 x 200 x 2mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Plastering with Cement Morter 1:5 mix 12 mm thick inculding cost and conveyance of all materials to site and labour charges for curing etc

Provision for Cupboard Cuddapah slab 40 mm tk inclding supply and fixing etc

Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three M.Sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Granolithic floor finish of 25 mm thick in PCC 1:2:4 using 10-12 mmHBGS Jelly inculding curing etc

Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work).

Fabrication and supply of mild steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Door 0.90 x 2.10 m

Door 1.20 x 2.40 m

Door 0.75 x 1.50 m

Fabrication and supply of mild steel window of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

window 1.50 x 1.30 m

ventilator 0.90 x 0.45 m

Cost and supply of RCC jolly including all cost & conveyance

RCC Jolly 0.60 x 0.45m

Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Inner wall )

Plastic Emulsion painting two coats over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( outer wall )

Painting two coat of new iron works such as steel Doors,windows,ventilators, etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats,ete.

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 17

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 37

Supply and run of 2 of 4.00 sq.mm (56/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 67

Supply and run of 2 X 4.00 sq.mm (56 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 70

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 107

Supply and fixing of single box type Compact flourescent tube fitting with copper choke and condenser with TW round block on wall or ceiling with flourescent tube with PVC unsheathed copper leads from terminals to the fitting of Tube Light [SD 84]

Supply and Fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit on TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD125

Supply and fixing of WT bulk head fitting with guard for 11W CFL SD 83

Supply and fixing of 300 mm ( 12") sweep AC Exhaust fan complete with necessary wall opening and making good on the wall. SD 114

Supply and fixing of indian Water closet with "P" ' S' trap, PVC Pipes, 580mm x 440mm etc. complete.

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 125 mm "P" or "S" trap connecting with CI pipe of 125mm dia / PVC pipe

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair

Provision for PVC tank of 1000 litres Capacity Tank and Fitting Arrangements

Bala painting for both inner and outer Portion Including Material and Labour Charges

Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete.

Earthwork Excavation in narrow trenches or laying and joijting of pipes and specials and depositing on bank with an initial lead of 10 m and initial lift of 2 m in hard stiff clay. Still black cotton, hard red earth shales murrams hard gravel soil including shoring strutting lighting and watching and tested etc., complete as directed by RDDA officers.

Refilling with excavated earth after the pipes are laid jointed and tested including watering ramming and consolidation etc., Complete as directed by RDDA., Officers

Supply Deliverry of PVC Pipes to confirm to ISI Specification and as amended from time to time 63mm PVC 4KSC PIPE

Conveyance of the PVC Pipes to site and lowering into trenches laying to proper grade and alignment jointing with PVC Couplers with cement paste including cost of fixing specials (Specials should be supplird by the contractor) and testing the required pressure including conveyance of water upto 1.00 KM lead for filling curing testing as directed by RDDA., Officers 63mm OD PVC 4KSC Pipe for P'Main

Supply delivery of Following GI / PVC Special Confrming to IS Specification and as amended from time to time

Pvc saddle piece 63mm x 25mm

25mm UPVC from distribution line

25mm UPVC bend

25mm UPVC Elbow

25mm UPVC Coupling

20 mm SS/brass tap (Local rate)

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Please Enable Macros to View BoQ information