SPECIAL REPAIR TO BUILDING NO 243 INSIDE COD AND PROVN OF UTENSIL PLATE RACK IN CERTAIN MD ACCN OF JCOS ORS ACCN AT VRG LINES N COD ESTATE AT KANPUR CANTT

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) complete all as specified and directed.

Demolition of cement concrete not exceeding 15 cm thickness, below or above ground level of any description complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in floors, finished even and rough to receive floor topping complete all as specified and directed.

M&L for coloured joint free Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

All as per item No 4 above but as on wall, skirting/dado including 10 mm thick plaster in CM 1:4 complete all as specified and directed.

M&L for 7 to 8 mm thick Joint free Non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles laid over 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured printed joint free tiles of size 300x450 mm & 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles including 10 mm thick plaster in CM (1:4) complete all as specified and directed.

Taking up or down 15 mm dia steel tubing and connection including removal complete and all as specified and directed.

Taking up or down 20 mm dia steel tubing and connection including removal complete and all as specified and directed

Supply and fixing 20mm outer dia 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings like PP-R Tee, bend, elbow , sockets, unions, nipples etc fixed complete to walls with clips as required at site ceilings or in floors etc. Make: Prince/Supreme/Finolex/Kisan as approved by GE.

S&F 20mm dia bore steel tubes "medium grade" galvanized with all fitting to walls and ceiling or laid in floor complete all as specified and directed.

S&F in repair 15mm dia bib tap, fancy type, chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule complete all as specified and directed.

S&F in repair 15mm dia stop valves/Angle valve, fancy type, chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15mm dia pillar taps cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs for Vitreous china wash hand basin white flat back size 550x400mm but exclusive taps, wastes, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, 25 mm dia 800 mm long PVC waste pipe & 32mm dia CP waste coupling and including brackets complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including flush pipe with white seat & cover with flat bottom with hinging device including all fitting all as specified and directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including 800 mm long PVC waste pipe / flush pipe , complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and incl 60mm long brass screws, pointing around urinals back in cement , fixing flushing cistern with brackets, flush pipe, grating and union for discharge pipe.

S&F in repair 10 ltrs capacity low level PVC flushing cistern, valveless, symphonic type, white with inlet, ball float and handle including brackets complete and all as specified and directed.

S&F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod with high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap/Nahani trap plain with grating including jointing with solvent cement including 125 mm chromium plated grating with hole including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) complete all as specified and directed.

S&F in repair 15mm bore PVC connection, 450mm long complete and all as specified and directed

Dismantling of water tanks of capacity exc 250 ltrs but not exc 500 ltrs complete all as specified and directed.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks in white colour (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.

Taking down 75/ 110 mm rain water pipes, any pattern with all fittings complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, Type 'B', ISI marked of 110mm complete all as specified and directed.

S&F PVC SWR pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, Type 'B', ISI marked of 75mm complete all as specified and directed.

S&F PVC SWR bend of any radius for 75mm pipes complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutters from the frame) area not exc 1.5 Sqm complete all as specified and as directed.

Taking down chowkhat or frames with shutter (without taking off shutters from the frame) area exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

S&F Second Class hard wood plain, solid, straight as in chowkat and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed .

S&F solid PVC frame ( single rebated) of size 50 mmx 47 mm made oud of 5mm plain colour PVC sheet with homogenious fine cellular structure having smooth outer integral skin with suitable metal stifner & fixed with 100x8 sheet metal CSK (copper screws) screws complete as shown on drawing all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cemen in the frame at site as per specification & drawing.

S&F 100 mm long PVC butt hinges complete all as specified and as directed. Make : Prayag or eqv.

S&F 150 mm long PVC handle complete all as specified and as directed. Make : Prayag or eqv.

S&F 150 mm long PVC barrel tower bolt complete all as specified and as directed. Make : Prayag or eqv.

M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) for fixing holdfast and coping including all necessary form work complete all as specified and directed.

S&F mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, hold fast etc., complete, drilled for fixing of steel hanging conf to Fe-410-w or E -250 quality A complete all as specified and directed.

S&F factory made 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 19/20mm thick Particle board, exterior grade prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work including liping work teak wood beading 6mm thick complete all as specified and directed.

S&F in repair continuous piano hinges mild steel, bright finish or electrogalvanised width of flaps when open in 40 mm complete all as specified and directed.

S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and stel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per HQCELZ Lucknow Drg No LZ/C-TD/130 sheet 1/4 to 4/4 complete all as specified and directed.

S&F factory made steel tubular Steel window with side hung shutters including box type hinges with steel handle and stel peg stay complete without glazing bars dovetailed or welded complete all as as per HQCELZ Lucknow Drg No LZ/C-TD/130 sheet 1/4 to 4/4 complete all as specified and directed.

M&L factory made steel tubular Steel ventilators with top hung shutter including hinges, steel peg stay complete as as per HQCELZ Lucknow Drg No LZ/C-TD/130 sheet 1/4 to 4/4 including fixing of 4.0 mm thick figured glass panes glazing with oil putty complete all as specified and directed.

S&F mild steel Framed work such as grills, grating etc. with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F galvnanised mild steel wire cloth galvanized 0.45mm normal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F 3mm thick plain glass sheet and glazing with oil putty in squares area not exc 0.5Sqm in each pane complete all as specified and directed.

S&F mild steell butt hinges, medium weight cold rolled of size 100mm complete all as specified and directed.

S&F aluminium anodised handle "D" type of size 150mm complete all as specified and directed.

S&F 200mm long aluminium anodised tower bolt of extruded section complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Cutting holes in brick wallls/ stone walls built in cement mortar for inserting holdfasts and making good dismantled portioned in CM 1:3 or cement concrete 1:2:4, type B-1 using 20mm graded aggregate as required thickness of wall exc. half brick thick but n. exc one brick complete all as specified and directed.

Dismantling of steel work of any description in any positions not otherwise provided for complete all as specified and directed.

M&L for preparation of new steel surfaces of any description exc. 10 cm width or girth and applying two coat of synthetic enamel paint over a priming coat of red oxide complete all as specified and directed.

All as per item No. 55 here in before but one coat synthetic enamel paint on old steel surfaces complete all as specified and directed.

Demolition of brickwork or stone masonary built in cement mortar incl all quins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concre type complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per item no.58 here in before but except brickscomplete all as specified and directed.

Taking down cement plaster from brick wall including racking out joints, hacking for key & scrubbing down with water where existing complete all as specified and directed.

M&L for 15mm thick rendering on fair faces/ other than fair faces of brick or concrete surface of wall in CM 1:6, finished fair & even complete all as specified and directed.

M&L 15 mm thick rendering on fair faces/ other than fair faces of brick or concrete surface of wall in CM 1:4 finished fair & even complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls complete all as specified and directed.

M&L for two coat of oil bound distemper on new plastered surface on wall over a coat of primer including preparation of surfaces complete and all as specified and directed.

M&L for preparation of old plastered surfaces and applying two coats of cement base paint of approved shade on walls complete all as specified and directed.

M&L two coat oil bound distemper on old plastered surface on wall over primer including preparation of surfaces complete and all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar complete all as specified and directed.

S&F pre polished 18-20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) over 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Dismantling wall panelling or ceiling boards of any descripton any thickness & at any height complete all as specified and directed.

Dismantling grid work of any description as of false ceiling at any height complete all as specified and directed.

M&L for powder coated GI grid frame work for false ceiling of size 605x605mm, the snap grid shall be of aluminium main & cross tee of size 36.5x25x1.4mm (weighing 0.24 Kg/RM) and angle of size 23.5x26.4x1.4mm (weighing 0.191 Kg/RM) fixed to wall with rawl plug and stainless steel screw 50mm 450mm c/c and tied with and incl 4 mm dia suspension wire MS @ 1200mm C/C complete all as specified and directed.

M & L for providing 12mm thick Gypsum board 60x60cm in size fixed in ceiling (aluminium snap grid work) with screws as per manufacturer instructions and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Demolition of reinforced cement concrete in of any description and in any position not otherwise provided for complete all as specified and directed.

M&L for providing precast cement concrete (1:2:4), type B1 (using 20 mm graded stone aggregate) and set in cement mortar (1:4) in window or door cills, lintels etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throting etc. complete with joints to match complete all as specified and directed.

M&L for mild steel TMT 10 mm dia & over, cut to length bent to shape required including cranking , binding spirally for hooping for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per item No 75 but 6 to 8 mm dia in stirrups spacers and binders complete all as specified and directed.

Dismantiling of AC sheet (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

M&L regular modified polyeser colour coated galvanised steel rib profile sheet (TCT) 0.50 mm thick E 42 (inclusive of protective coating) having total mass coating 150 gms/sqm on both side as per IS-14246:95 (JIS:3312polyester coating 30-40 micron)of any colour having tensile strenth of 550 Mpa as in roof covering/ clading to wall fixed with on iron/ wooden members with self drilling zink allunium coated metal screws of suitable size having cap with rubber washers complete all as specified and directed.

M&L regular modified polyeser colour coated galvanised steel plain sheet (TCT) 0.50 mm thick E 42 (inclusive of protective coating) as in ridge, velly gutter having total mass coating 150 gms/sqm on both side as per IS-14246:95 (JIS:3312polyester coating 30-40 micron)of any colour having tensile strenth of 550 Mpa as in roof covering/ clading to wall fixed with on iron/ wooden members with self drilling zink allunium coated metal screws of suitable size having cap with rubber washers complete all as specified and directed.

S&F mild steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Dismantiling of CGI/PGI sheets any thickness as in roof coverings complete all as specified and directed.

S&F 1.00 mm thick PGI sheeting of class -VIII as in valley gutters, wall cladding and straight flashings etc ,fixed with 'L' type or 'J'type or crancked hook bolt and washers sealed the joint of valley gutter with comercial bitumen 80/85 grade complete all as specified and directed. Make : TATA/SAIL/RINL/JSW

Dismantling timber scantlings 40 Sqcm and over in section, in any position in unframed work complete all as specified and dorected.

S & F rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, and watch tower structure rails fastenings and heavy bracket frames beam, tee, channel or flat sections including distance pieces, cleats etc. and similar work confirming to Fe-410 Gde E-250 quality A complete all as specified and directed at site.

M&L for preparation of new untreated steel and iron surfaces of any description not exc 10 cm width or girth when unconnected with other painting or when painted in a different tint and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F utensil rack (plate rack) made out of 1 mm thick stainless steel of size 31 inch x 30inch x10inch fixed to wall with chromium plated brass screws 30 to 50mm size including all internal fittings of utensil rack as per sample approved by Engineer in Charge.and as directed.Make: Prayag/Blue star/ Neelkanth/Nirali

EnM Schedule

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified and directed.

M&L for point wiring with PVC (FRLS) insulated and unsheathed cable 1.5 Sqmm (Nominal area) multi-stranded copper conductor single core with proper colour coding including PVC conduit medium grade of 25 mm dia concealed in walls and surface on ceiling with and including pressed steel concealed terminal boxes of appropriate size and top cover 3 mm thick of plastic laminated sheet ISI marked of desired colour of make : Hylam, painting terminal boxes inside and outside with a coat red oxidé primer complete with all accessories with and including 1.5 Sqmm PVC insulated and unsheathed green colour multi-stranded copper conductor cable to common earth and connected to earth dolly complete all as specified and directed for the following points:- Note: Cutting chases in walls required for concealed conduit wiring shall be finished with cement mortar 1:4 and, surface shall be matched with existing surface by using putty, plaster of paris etc. and applying finishing coat of existing treatment shall be deemed to be included in the unit rate quoted by the contractor.

One light / fan / bell / exhaust fan point controlled by one switch.

One 3 Pin socket outlet 5 Amps on Independent board.

One 3 Pin socket outlet 5 Amps on same board.

All as per item No 89.0 here in before but for one power point, independent point with 2.5 Sqmm (Nominal area) FRLS, PVC insulated and unsheathed copper conductor multi-stranded single core cable including green colour earth wire of size 2.50 Sqmm FRLS, PVC insulated and unsheathed copper conductor multi stranded single core cable.

S&F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed.

S&F switch piano flush type 15/16 Amps 240 Volts single pole one way complete all as specified and directed.

S&F socket outlet flush type, 5 pin 6 Amps, 240 Volts complete all as specified and directed.

S&F socket outlet 2 in 1, 6 pin 5 & 15 Amps, 240 Volts complete all as specified and directed.

S&F ceiling rose surface bakelite of three terminals 240 Volts complete all as specified and directed.

S & F of lamp holder insulated body with back plate suitable for batten / conduit fitting complete all as specified and directed.

M&L for submain wiring with two single core 6 Sqmm copper conductor PVC insulated and unsheathed multi-stranded cable (FRLS) including PVC conduit medium grade of 25 mm dia, concealed in walls for sub main connection and 6 Sqmm PVC insulated and unsheathed multi-stranded green colour copper conductor cable (FRLS) as an earth wire to common earth and connected to earth dolly including taking down old one complete all as specified and directed.

Supply and fix single pole and neutral enclosure with a top pin and earth plug and socket complete with one SPN MCB 25 Amp, 240 Volts. Make : Havells Cat Part No. DHDMCDPO253025 or equivalent make of Legrand / Siemens / ABB.

S&F in replacement of old light fitting with LED tube light fitting high efficiency extruded aluminium housing linear batten 20/22 watt fixed on wall/ceiling complete with all accessories along with LED tube rod 20/22 watt and provision of three core flexible of 1.50 Sqmm copper conductor cable from ceiling rose to light fitting and other fixing arrangement as required at site complete all as specified and directed..Make:- Philips Cat Part No BN021C LED 20S PSU NW GR / Wipro TRIM LED LL20-281-XXX-65AL1 / Havells cat part no ENDURALINEARNEOBS 20WLED865SPCWH /Bajaj cat part no BCLAB 20W Note : Contractor will submit guarantee/warranty certificate from manufacturer.

S&F in replacement of LED wall security light 25 watt, pressure die- cost aluminium IP-66 road way luminaries with high power LED as light source with acrylic cover with suitable size bracket fixed with clamps, nut bolt, washer and provision of three core flexible of 1.50 Sqmm copper conductor cable from ceiling rose to light fitting complete all as directed Make: Havells cat part no SL25WLED 757SASYTOPCMP/ WIPRO cat part no LR02-291-xxx-57-xx/ C&S cat part no INDUS-E/25W LTESSE25WLED/Bajaj cat part no BCLST25WLEDIV2 or equivalent in Philips/CG. Note : Contractor will submit guarantee/warranty certificate from manufacturer.

S&F in replacement of recess mounted LED luminaire 35/36W (2 ft x 2 ft approx)with all accessories including cutting of false /grid/POP ceiling complete with electronic driver & high brightness and provision of three core flexible of 1.50 Sqmm copper conductor cable from ceiling rose to light fitting and other fixing arrangement as required at site complete all as specified and directed. Make Wipro Elate LED Cat part no CRCO10 R 038HP57GL1 / Havells cat part no PETAL 2X2PLR36WLED857S / Philips cat part no RC380B LED36S -6500 G4 L60 W60 PSD OD or technocommercially equivalent in C&S / CG as approved by GE. Note : Contractor will submit guarantee/warranty certificate from manufacturer at the time of claiming payment.

S & F in replacement of LED mirror light fitting 10/11watt, 6500K, IP65, with efficient heat dissipation & intigrated electronic driver complete including connecting electrically with 1.5 sqmm 3 core wire all as specified and directed. Make : Havells Cat part no LUMILINEPLUSBS10 WLED865SPCSS / Wipro LL20-111-XXX-65NE3 /Bajaj Cat part no BCLSB 10NW/C&S cat part no NAKSHATRA/10W LTTB2F10WLED/W or equivalent in Philips/CG as approved by GE. Note: Contractor will submit guarantee/warranty certificate from manufacturer.

S & F sheet metal enclosure double door factory made MCB distribution board Single pole and neutral 240 Volts, 8 way with neutral and earth bus bar having IP-43 protection and double door metal concealed/flush to wall surface including making connections with thimbles as required complete all as specified and directed. Make : Schneider / L & T / Legrand/C&S/ Indo Asian/Havells/ABB

M&L for MCB single pole, 240 volts 6 to 32 amps, with rupturing capacity 10 KA using thimbles of required size. Make : Schneider / L & T / Legrand/Indo Asian/C&S/Havells/ABB

M&L MCB SPN, 240 volts 32 to 63 amps,with rupturing capacity 10 KA using thimbles of required size. Make : Schneider / L & T / Legrand/Indo Asian/C&S/Havells/ABB

M & L for earthing with galvanised steel earth plate electrode 600 x 600 x 6mm thick buried directly in the ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below the ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washers of galvanised or steel all as specified or shown in electrical plate of SSR (Part-l) including necessary excavation, earth work, GI pipe 15 mm dia light grade for protection of galvanised iron earthing wire, GI pipe 20 mm dia light grade watering pipe etc. including concrete chamber of PCC 1:2:4 type B-2 (using 40mm graded stone aggregate), copping in PCC 1:3:6 type C-1 (using 20mm graded stone aggregate), internal surface of concrete chamber shall be plastered with 12 mm thick cement mortar 1:4 and 50 mm thick RCC cover in pre-cast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) duly reinforced with 8 mm dia TMT bar @ 80 mm c/c both ways and charcoal dust, common salt etc. including testing after completion complete all as specified and directed.

FATEHPUR CONSTRUCTION COMPANY

Agarwal Builders

ARORA BROTHERS

M/S SDS Construction Co.