Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹95.8 LAccepted-AOC HOUSE NO 195 3 NAIKWADA CANCA BARDEZ GOA | L1 | Accepted-AOC 1st Lowest | |
| 2 | L2₹1.1 Cr+₹13.8 L (14.4%)Rejected-Finance GOA | NORTH GOA | GOA | 403524 | L2 | Rejected-Finance 2nd Lowest |
Tender Value
₹91.3 L
EMD Value
₹1.8 L
Closing Date
18 Apr 2024, 11:00 amClosed
executive engineer
paryatan bhavan patto
Providing Strong Room, Counting Station , Pandal and Barricading around Strong Room at Damodar College of Commerce and Economics for the Lok sabha Election 2024.
2024_GTDCL_15492_1
GTDC/PC/EE(S)/2024-25/e-01
Limited
Civil Works
Works
10 days
south goa
Please refer Tender documents.
10 documents required · 10 mandatory
₹8,000
₹1.8 L
22 Apr 2024
13 Apr 2024
18 Apr 2024
13 Apr 2024
18 Apr 2024
13 Apr 2024
Amount
Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint.
Providing MS plate in the base for support for steel section including welding and etc complete
Providing and fixing G.I. chain link mesh 6.35cm x 6.35 cm x 10 gauge (2.5” x 2.5” x 10 gauge) fixed with angle iron posts and struts by G.I. or M.S. staples at 20cms apart with welding with the iron posts (placed at 3 meters centre to centre) including providing barbed wire stiffeners (shall weigh 9.33 kg. per 100 meters minimum) at top and bottom with barbed wire stiffers by binding wires at 50cms centre to centre complete as per the direction of the Engineer – in – charge (angle iron posts struts, earthwork and concrete for fencing posts and struts to be paid separately)
Dismantling steelwork in built up sections in angles, tees, flats and channels including all gusset plates bolts, nuts, cutting dismembering and staking within 50 mts. Lead and disposing off
Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint.
Providing MS plate in the partition for support for steel section including welding and etc complete
Dismantling steelwork in built up sections in angles, tees, flats and channels including all gusset plates bolts, nuts, cutting dismembering and staking within 50 mts. Lead and disposing off
Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.
Providing and fixing M.S. door latch/ Aldrop with Weld etc. complete
Providing and fixing M.S. Tee hinges bright finished or and black enamelled, with necessary weld etc. complete
Providing and fixing M.S. handles with weld etc. complete.
Providing and fixing M.S. tower bolts (barrel type) with necessary weld etc. complete
Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : a) All kinds of soil
Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : a) All works upto plinth level
Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint.a )In R.S. joists, channels, angles, tees
Providing corrugated G.I. sheet roofing, fixed with galvanized iron j or 1 hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins rafter and trusses.0.63 mm thick sheet - 24 G
Dismantling G.I. sheets roofing including ridges, hips valleys and gutters etc. and stacking the material within 50 meters lead. And disposing off
Dismantling steelwork in built up sections in angles, tees, flats and channels including all gusset plates bolts, nuts, cutting dismembering and staking within 50 mts. Lead and disposing off
Providing and fixing 1 mm thick M.S. sheet garage door with frame of 40 x 40 x 6 mm angle iron 3.15 mm M.S. gusset plate at the junction and corners, all necessary fitting complete including applying a priming coat of red lead paint.Using M.S. angles 40 mm x 40 mm x 6 mm for diagonal braces.
Making good the walls, slab, floor by griouting, plastering replacing the floor tites etc
Providing Waterproof Pandal complete of size 10 Mtr X 6 Mtr
D K BHOMKAR
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .