Installation of 1x63 KVA X-mer, 11 KV Line and LT Line Baburao Khandagre Ke Khet Ke Pass At Village Mandvi Under Athnair D/c in O and M Dn Betul (S)

Supply, Erection,and Commissioning of DTR 11/0.433 KV BIS Level-II Conventional 63 KVA

Supply and Erection 140 Kg.,8.0 Mtrs. Long PCC pole

Supply and Stringing of AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) with necessary clamps made of aluminium T-1f as per IS:8309 and necessay jointings sleeves, binding wires etc. complete in all respect.

Supply, Erection,and Commissioning of Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box

Supply and erection of 11 KV Composite Polymer Disc Insulator

Supply and erection of 11 KV Strain Hardware (T&V type) fitting

Supply and erection of 11 KV D.O. Fuse Unit Polymer type

Supply, Erection,and Commissioning of XLPE 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts

Supply, Erection,and Commissioning of XLPE 1 core unarmoured 50 sqmm Aluminium conductor 1100 Volts

Supply and erection of Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC

Supply and fixing of BIMETALIC CLAMP DISTRIBUTION TRANSFORMERS BUSHING

Supply, Erection,and Commissioning of LT XLPE Cable Arial Bunch 3X50 + 1X16 + 1X35 Sq mm. 1100 Volts

Supply and erection of Earthing Coil of 115 Turn of 50 mm dia and 2.5 Mtr. Lead of 4.0 MM G.I. Wire

Supply and erection of Jointing Sleeves suitable for Raccoon (80Sq.mm.Al. Eq.) AAAC conductor

Supply and erection of A.B Cable hanging clamps/ tension clamps (Galvanized) as per enclosed Drawing

Supply and erection of Suspension Clamp for LT AB cable

Supply and erection of Clamps for neutral for AB Cable

Supply and erection of Piercing connector Type-I for 1P/3P (Main 16-50 sqmm tap-off 16-50 sqmm)

Supply and erection of Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm)

Supply and erection of TRANSFORMER BELTING SET 50X50X6 MM ANGLE WITH TWO CROSS FIXING CHANNEL

Supply and erection of Transformer mounting Channel (100X50x6 mm.)

Supply and erection of LT Distribution box with Isolator & HRC fuse - 63 KVA DTR (200A & 6 SP of 60A)

Supply and erection of galvanized Stay Set complete duly painted with 16 mm dia. stay rod, A&B type anchor plate, thimble, turn buckles, etc. by digging a suitable size pit in all types of soil/ rock and cement

Supply and erection of Stay Wire 7/3.15 mm.(7/8 SWG)

Supply and fixing of Danger Boards Enamelled 11 KV as per specifications

Supply and erection of 11 KV Polymer Lightening arrestor Gapless type

Supply and erection of Aluminium binding wire and tape

Supply and erection of Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole

Supply and Erection of 8' center DP Bracing support angle of 65x65x6 mm duly painted with double coat of Red Oxide and Al.Paint for 11 KV sides (Painting with Paint to be included in erection charge)

Supply and Erection of 11 KV Polymer Pin Insulator

Supply and erection of 11 KV V - Cross Arm made of MS Angle65x65x6 mm with back clamps 65x8 mm Flat duly painted with double coat of Red Oxide and Al.Paint, with all necessary clamps, MS nuts & bolts etc.(Painting with Paint & cost of nut bolt to be included in erection charge)

Supply and erection of 11 KV Top Clamp made of MS Angle65x65x6 mm with back clamps 65x8 mm Flat duly painted with double coat of Red Oxide and Al.Paint, with all necessary MS nuts & bolts etc.(Painting with Paint to be included in erection charge)

Supply and fixing of Anti Climbing Device as per specifications

Supply and fixing of G.I. WIRES 4.0 MM. (8 SWG)

Supply and fixing of MS strain plate 65x8mm 250mm long

Supply and erection of 3 Ph Service conn. Box with one incmng up to 35 mm2 and 4no outgng up to16 mm2

Supply and erection of Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm

Supply and erection of Clamp for 140 Kg PCC Pole MS Flat 50x6 mm

Supply and Erection of Concreting of Stay (16 mm / 12 mm) @ 0.2 Cmt. per stay

Supply and Erection of Concreting of PCC support @0.05 cmt. per pole for base padding.

Supply and Erection of Concreting of PCC poles @ 0.45 cmt. (Cubic Metric Ton) per pole

Supply and erection of DC Cross Arm made of 100x50x6 mm duly painted with double coat of Red Oxide and Al.Paint MS Chanel with strain plate, suitable for 8 feet centre D.P., & suitable for 8' centre DP with 2 pair of clamps 65x8 mm Flat, suitable for H-Beam and DTR DP with all necessary clamps, MS. nuts & bolts etc.(Painting with Paint to be included in erection charge)

Supply and erection of D.O.Mounting channel 75x40x6 mm

Supply and erection of Stay Insulators 90X65 mm

Supply and Erection of EARTHING SET (DTR EARTHING) AS PER CIRCULAR NO 1516 DATED 17.03.08

Supply and erection of Back filling of poles with boulders

Supply and erection of MS Nut & Bolts of assorted size

Supply and erection Stone Block/Pre cast block for base Pedding (450X450X75MM)

ARSH ELECTRICALS