PROVN OF COVERED SHED 02 X TOILET BLOCK FOR OR CIV DEF EMP AND PLINTH FOR HAY STACKS AT EBS BABUGARH UNDER AGE BR II AND AGE EM I OF GE NORTH MEERUT CANTT

Amount

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in soft/ loose soil for foundation etc or for shaft, wells, manholes,pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out and levelling of bottom surface to required level complete all as specified and directed.

Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick each complete all as specified and directed.

M&L for sand (washed river) filling under floors or in paving n.exc 15 cm thick including watering and consolidation complete all as specified and directed.

Removing excavated material ( spoil ) not exceeding 50 m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed.

M&L for hardcore of broken Stones of gauge n exc 63 mm , deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M& L for providing Cement concrete 1:4:8 Type D 2 (using 40 mm graded crushed stone aggregates) ,in foundations, filling and mass concrete complete all as specified and directed.

M&L for providing cement concrete 1:2:4 Type B 0 (using 12.5 mm graded crushed stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs hold fast water troughs, filling in pressed steel door frame and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

-------------BLANK------------

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in benching of man holes including necessary formwork and finished exposed surface of concrete complete all as specified and directed

M&L for providing cement concrete 1:3:6 Type C-1 (using 20 mm graded crushed stone aggregates) in cills, copings, kneelers, bed plates, kerbs hold fast, fillings in pressed steel door frame and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded stone aggrigate) as in cover slab chullah hoods, chajjas, water troughs, shelves or similar works set & jointed in CM 1:4 complete all as specified and directed.

M&L for providing reinforced cement concrete M-25 (design mix) (using 20 mm graded crushed stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates)as in beams, cantilevers, bressummers, lintels over 1.5m clear span complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates)as in columns, pillars, piers, posts and struts complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:4 complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Supply only Integral water proofing compound (I.S.I marked on packing)complete all as specified and directed.

M&L for providing formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; chajjas and similar work not exc 200mm thick; rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, exc 1.5m clear span cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides of square ,rectangular or polygonal pillars, posts, struts, piers, and columns rough finished surfaces of concrete flat complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & all as per SSR Part-II complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown on page 160 of SSR Part-II complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.

S&F butt hinges of 100 mm size, Medium weight, cold rolled mild steel. complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as per Srl item No 30 here-in-before but 6mm to 8mm dia

All as per Srl item No 30 here-in-before but 5mm dia and over up to and including 10mm diaas in stirrups, spacers / binders.

S&F steel work in tubular, Square, rectangular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade St. - 240. complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges,. Steel peg stay and including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonary work complete all as specified and directed.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg / sqm including cleaning the surface complete all as specified and directed

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

M & L for laying Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) jointless area of each tile exc 0.06sqm but n.exc 0.11 sqm first quality coloured of grade B II (a) /B II (b) and of abrasion resistance - PE I -III or above , in floors etc, set in neat cement slurry over CM screed (screed shall be measured and paid for separately under respective item), jointed and grouted with tile epoxy grout complete all as specified and directed".

M&L for Glazed ceramic tiles coloured 300mmx 200mm , 6 to 7 mm thick first quality of grade B tiles on vertical surface such as skirting / dados etc set in neat cement slurry over CM screed (screed shall be measured and paid for separately under respective item). Jointed and grouted with tile epoxy grout complete all as specified and and directed

M&L for laying 100mm thick PCC 1:2:4 type B2 (using 40mm graded crushed stone aggregates) as in floor/plinth protection, cement concrete surfaces finished even & smooth without using extra cement. concrete shall be laid in alternate bays n .exc 3m in length complete all as specified and directed.

M&L for laying 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in floor/plinth protection, cement concrete surfaces finished even & fair without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in floor/plinth protection , finish even & smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

-------------BLANK------------

M&L for 100mm thick PCC (1:2:4) type B2, (using 40 mm graded crushed stone aggregates) as in floors/paving finish cement concrete surface even and smooth without using extra cement, with making XPM impression of expanded metal while the concrete is green complete all as specified and directed

M&L for 25mm thick Cement concrete 1:2:4 type B1 (20mm graded aggregate as in sub base, floors and paving complete all as specified and directed

M&L for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : NITCO, Mumbai ; Redsun tiles & Pavers, panchkula ; Star Tiles & Industries, Rama Devi, Kanpur ; Mayur tiles & Interlocking Pavers, Lucknow ; Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement with using water proofing compound @ 3% complete all as specified and directed. Note:- water proofing compound will be measured and paid seperately.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 10mm thick in CM 1:4 for laying wall tiles complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying three coats of white lime washing on walls complete all as specified and direcrted.

M&L for three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Supplied and fixed GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied and fixed GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied, hoisted and fixed in position rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity. complete all as specified and directed.

S&F bib taps, cast copper alloy chromium plated with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supplied & fixed stop valves, 15mm bore dia cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supplied & fixed stop valves, 20mm bore dia cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F brass ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and of 20 mm bore and fixed complete all as specified and directed.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 190gms) complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and directed. complete all as specified and directed.

Supplied and fixed grating doom 100 mm dia with waste hole of PTMT (minimum weight 25 gms) complete all as specified and directed.

Supplied and fixed 110mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint, laid in trenches/under floor complete all as specified and directed.

Supplied and fixed 75 mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed.

Supplied and fixed UPVC (SWR) bends 110 mm bore complete all as specified and directed

Supplied and fixed UPVC (SWR) bends 75 mm bore complete all as specified and directed

Supplied and fixed PVC (SWR) gully trap 125/100 mm bore setting and jointing with solvent cement complete all as specified and directed

Supplied and fixed vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

Supply and fixing vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral foot rests with and including cast iron 'P' or 'S' trap and setting the trap and pan in and including PCC 1:4:8, type D-2 minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, making all connections complete all as specified and directed.

Supply and fixing vitreous china urinal bowl, flat back of size 465x355x265mm (minimum) white with grating and unionfor discharge pipe (excluding flushing cistern,flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm lng brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusiveof fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed.

Supply and fixing PVC low level flushing cistern of 10 Ltr capacity syphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

M&L for construction of septic tank for 25 users without sludge chamber including necessary earth work in any type of soil (soft / loose / hard / dense) all as shown on drg No TD-217 sheet 1/7 to 7/7 complete all as specified and directed.

M&L for providing concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe in PCC 1:3:6 type C2 (using 40 mm graded crushed stone stone aggregates) complete all as specified and directed.

M&L for construction of Soakage wells, excavated in ordinary soil foundation PCC 1:3:6 walls of honey combed and solid brick in CM RCC cover slab filling work with brick bats complete of size 2.4m dia x 6m depth (effective depth 4.5 m) as directed by directed by Engr-in-Charge. Drg No Ref TD HQ CEBZ Drg No TD/309 sheet 1/4, 2/4, 3/4 & 4/4

M&L for SGSW 'grade 'A' drain pipe 150 mm internal dia laid in trenches , jointed and tested complete all as specified and directed.

-------------BLANK------------

S&F rolled mild steel in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

M&L for point wiring with 1.5 Sq mm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor cable in and including rigid non metallic PVC concealed conduit 20 mm dia or higher medium grade ISI marked complete with all PVC conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, concealed in wall including earth wire continuous of PVC insulated, unsheathed 1.5 Sq mm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic laminated sheet screwed with brass screws, cup washers complete all as specified and directed for the following :- One light/fan/exhaust fan/bell/buzzer point controlled by one, one way switches 5/6 Amps.

All as per Srl item No 85 here-in-before but One 3 pin 5/6 amps socket out let point on independent board, controlled by one, one way 5/6 amps

M&L for point wiring with 2.5 Sq mm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor cable in and including rigid non metallic PVC concealed conduit 20 mm dia or higher medium grade ISI marked complete with all PVC conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, concealed in wall including earth wire continuous of PVC insulated, unsheathed 2.5 Sq mm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic laminated sheet screwed with brass screws, cup washers complete all as specified and directed .

M&L switch Piano, flush type, ivory finish 5/6 Amps, single pole, one way complete all as specified and directed.

S&F socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps flush type ivory finish complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5 and 15 amp, flush type, ivory finish complete all as specified and directed.

S&F switch Piano flush type, ivory finish 15/16 Amps, single pole, one way complete all as specified and directed.

S&F ceiling rose, surface type, bakelite, 65 x 25 mm, three terminal complete all as specified and directed.

Supply and fixing lamp holder PVC body suitable for batten fitting including 01 No LED bulb 18 watt complete all as specified and directed.

Supply & Fixing LED Security light 25 W, aesthetically designed, complete with all accessories with GI pipe mounting bracket of suitable size and dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps as required, complete all as specified and directed.

S&F LED tube light fitting,22W, LED batten T-5 in extruded aluminium housing with diffuser etc. and all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F single pole and neutral DBs, 8 way, 240 V, double door type suitable for mounting incoming and outgoing MCB’s double pole/single pole, complete all as specified and directed.

Supply and fixing isolator DP, 40A suitable for mounting in DB, complete all as specified and directed.

Miniature circuit breaker single pole with thermal over load as well as magnetic short circuit tripping device suitable for single phase circuit of 240 Volts and 6 to 32 Amps current rating ‘C’ series, 10 KA complete all as specified & directed.

M&L for laying,testing cable XLPE insulated, screened, PVC bedded, galvanized strip or wire armoured, electric power cable 1100V grade with aluminium conductor of size 16 sqmm, 4 core, complete all as specified & directed.

S&F propeller type AC ventilating fans 230 Volts, 300 mm sweep (Exhaust fan) metallic body with louver shutter complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor and writing MES No with black synthetic enamel paint 2.0 cm high complete all as specified and directed.

S&F LED mirror light fitting,10W, T-5 LED batten in extruded aluminium housing with diffuser etc. and all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed.

-------------BLANK------------

-------------BLANK------------

-------------BLANK------------

Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct or inside the premises of transformer yard complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose.

M&L for laying burnt clay fly ash old size bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over under ground cable for protection complete all as specified and as directed.

High Tech Metal India

Rajneesh Jain

mohanlal gupta

H.B. Traders

SHRI BALAJI ENTERPRISES