Construction of New Building for Tamil Nadu Police canteen with Go-down at St Thomas Mount in Chennai City

Amount

1.1) Earth work excavation for foundation in all soils and sub soils to the required depth (including refilling) a) 0 to 2m depth

13.1) Filling with Excavated Earth in foundation and basement

21.2) Supplying and fixing of Teak Wood wrought and put up a) Teak wood over 2.00 metre and below 3 metre length

b) Teak wood below 2.00 metre length

23.3) Supply and fixing of Magnetic door catches

25) Supplying of M.S.Holdfast

30) Finishing the top of flooring with cement concrete 1:3 (No sand) 20 mm thick Ellispattern Flooring

31) Weathering course

39) Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate

40) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint

41) Painting the new Iron work with two coats of approved first class synthetic enamel ready mixed paint

47) Supply and fixing Alu Towel rail 75 cm long

69) Electrical arrangements Supplying and fixing 15amps 3 pin plug type socket

72) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

74) Charges for assembling and fixing of ceiling fan

76) Supplying and laying of 8 SWG GI wire on wall below ground levels

78) Earthing Station IS3043 (Type I)

86) Providing pre-constructional Antitermite treatment

Annexure 1.12) Supplying and filling with gravel

2.1.1) Supplying and filling in foundation and basement with filling crushed stone sand in layers of 150 mm thickness

3.1.3) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly) for foundation using 40 mm gauge broken stone jelly

3.3.3) P.C.C. 1:8:16 using 20 mm broken brick jelly for foundition and basement

6.2.2) Brick work in C.M. 1:5 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a) In foundation and basement

8.2.3.1) Providing and laying in position, Standardised concrete Mix M30 Grade Concrete a. In Foundation and basement

b. In Ground floor

c. In First Floor

d. In Second Floor

9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a. In Ground Floor

b. In First Floor

c. In Second Floor

10.2.2) Brick partition wall in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.) b. In Ground Floor

11.2.2) Brick partition wall in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.) a. In Ground Floor

b. In First Floor

12.1.1) Brick partition walls 50mm thick using kiln burnt country bricks of size 8¾”x4¼”x2” (22 x 11 x 5cm) in cement mortar 1:4 for superstructure a. In Ground Floor

b. In First Floor

14.3.1) Precast Cupboard slab 20 mm thick using standardised concrete mix M30 a. In Ground Floor

b. In First Floor

14.3.2) Precast cupboard slab 40 mm thick using standardised concrete mix M30 a. In Foundation and Basement Floor

18.1) Formwork using M.S.Sheet a.For Column footings,plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts,sill slab, staircase, portico slab and other similar works

c.For Square and rectangular columns and small quantities

21.5.1.3) Supplying and fixing of Solid Core Flush door Shutters with teakply on both side with teakwood lipping alround 35mm thick a) 1500x2400mm double leaf

21.5.2.2) Supply and Fixing Soild UPVC door Shutter with frame

21.7.3) Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 900 mm x 2400mm (single Leaf)

22.1.8.1) TW panelled double door shutter with brass fittings. a. 1800 X 2400mm with Brass fittings ( Double leaf)

26.1) Flooring in C.C.1:5:10

28.1) Floor plastering in C.M. 1:4, 20 mm thick

29.8.1) Supplying and fixing of Colour Glazed tiles using Grout (Tile Joint Filler) C.M 1:2, 10mm thick

29.9.1) Supplying and fixing of colour ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).

32.1.1) Finishing top of roof with one course of pressed tiles 23 x 23 x 2cm over a bed of C.M (1:3), 12mm thick mixed with water proof compound at 2% by weight of cement etc.

33.2.1) Plastering in C.M. 1:5, 12 mm thick.

34.2.1) Plastering in C.M. 1:4, 12 mm thick

35.2.1) Special Ceiling plastering in C.M. 1:3,10 mm thick

36.1) Cement mortar Border in C.M. 1:5, 12 mm thick a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

43.2.1) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels binding wire insulated with PVC

44.6.1) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992- type 'A' for Rain water down fall pipe with (UPVC special clamp )

50.5.1) Supplying, Fabricating and erection of M.S Scheme Name board

51.2) Supply and errection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 1000 litres (excluding free board) of approved brand (superior variety) with ISI Mark

52.1.1) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness not less than the specified in IS 4985 a) 32mm PVC pipe with necessary PVC/UPVC specials

b) 25mm PVC pipe with necessary PVC/UPVC specials

52.4.1) Supply, laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with UPVC Specials (fully consealed in walls) c. 20mm dia PVC water supply ASTM pipe

53.5.1) Supplying and fixing of porcelin Wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

54.1.1) Supplying and fixing of 15mm dia half turn CP long body tap

54.2.1) Supplying and fixing of 15mm dia half turn CP short body tap

56.3.1) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap - in G.F.

57.1.1) Supplying and fixing EWC superior variety (white) 500mm

58.3) Supplying and fixing the following dia PVC (SWR) pipe including all required PVC specials etc., all complete., a) 110mm dia PVC SWR pipe

b) 75mm dia PVC SWR pipe

58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.2.1) Supplying and fixing 150mm x 100mm size stone ware Gully trap using chamber burnt bricks of size 9”x4-1/2”x3” (23x11.4x7.5cm)

60.1) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety)

61.3) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.2.1) Supplying and fixing of following dia PVC Equal tee as per IS 10124/1982 a. 160 mm dia PVC Equal tee (Mould) BIS 7834/1975 Part VI

64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. ( PVC Box , Fire Retarded Box) a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point. (PVC Electrical Box )

66.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.(PVC Electrical Box )

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places. (PVC Electrical Box )

70.5.2) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark

71.3) Supply and fixing of 63amps triple pole Neutral Metal Clad Switch with Re-wirable Fuse Units

75.2) Supply and delivery of following Electric Ceiling fan a) 48" Electric fan 1200mm sweep

77.7) Run off main with 2 wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

79.5) Supplying and fixing 1No of 100Amps 500 volts grade porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole/EB street pole with necessary clamps

82.3.1) Supply and fixing of 25W LED street light with fittings (lower end)

84.3) Run off main with 2 wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

87.1) Supplying and delivery of three phase ELCB /RCCB 25Amps 30MA four pole (lowerend)

88.1) Supplying and laying of polished shahabad slab /stone, 20mm thick (Gray colour) of approved qualty for florring in CM 1:3

108.6) Run off main with 4 wires of 6 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable in fully concealed 25mm dia rigid PVC conduit pipe heavy duty with ISI mark

112.1) Supplying and fixing of 225 mm dia sweep AC exhaust fan of approved ISI

151.3.1) Supply and laying of the following size of PVC LTUG aluminium armoured cable (below GL) a) 3.5 C x 70sq.mm. PVC LTUG aluminium armoured cable

161.1.4) Supplying and fixing of brass cable gland suitable for following core sqmm PVC armoured LTUG cable a) 3.5 core x 70 sq.mm. PVC LTUG armoured cable

161.4) Supply and providing cable end termination of following PVC LTUG Aluminium armoured cable a) 3.5 core x 70 sq.mm. PVC LTUG aluminium armoured cable

162.2.1) Supplying and clamping of PVC armoured LTUG cable (Above GL) a) 3.5 core 70Sqmm PVC armoured LTUG cable

175.1.1) Supply and fixing of triple pole and neutral 4 way 7 segment 3 tier compartmental type MCB distribution board 3 phase with Metal / Acrylic Door Cover with IP42 Protection

207.3.1) Providing two coats of Plastic Emulsion paint including primer for inner walls

207.3.2) Painting the New walls with one coat of approved best ready mixed plastic emulsion paint in addition to one coat of approved primer coat over cement plastered ceiling surfaces

207.4.1) Providing two coats of Exterior Emulsion paint including primer for outer walls

238) Applying one coat of Anticorrosive treatment for steel reinforcements.

238.1) Applying one coat of Anticorrosive treatment for window grills

255.2) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9watts LED bulb

b) 12watts LED bulb

255.6.1) Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

344.2) Supply and fixing of Bevelled edge mirror 500 x 400 x 5.5mm

359.3.1) Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3, 20mm thick

362.2.2) Supplying and fixing of Stain free Nano polish Vitrified Tiles of size (600x600x8mm) for flooring in C.M 1:3, 20mm thick with grout (Tile joint filler)

366.1.1) Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick

366.3.1) Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick

367.1) Providing wooden Melamine polish for new wood work

451.3.2) Supplying and fixing of best approved quality of following CP water supply/Sanitary fittings a) CP Two Way Bib Cock with Health Faucet

448.2) Supplying and fixing of 32mm dia PVC Tee with end cap of best approved quality with ISI

741.1.1) Supply and fixing of 20A Double pole plug and sockets (higher end) in sheet steel enclosure with 32 amps DP MCB in flush with wall, with earth connection (for AC plug) of approved brand

741.2) Supplying and fixing of Single Pole 6A to 32A, 10KA Miniature circuit breakers 240 V / 415V 50HZ - AC supply suitable for both lighting and motor circuits - Lower end

832.5.2) Supplying and fixing in position of UPVC window of casement type (open) for all sizes

832.5.3) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

911.3.1) Supplying and laying of 1000 x 1000 x 300mm size MS 16 SWG powder coated cable terminal box

960.4.1) Supply and fixing of Aluminium TNPHC Emblem of 18" height

960.4.3) Supply and Fixing of 12" Height Aluminium letters

960.4.4)Supply and fixing of 9" Height Aluminium letters

960.4.5) Supply and fixing of 20"x5" size plastic foam name plate

960.4.6) Supply and fixing of 24"x8" plastic foam name plate with vinyl cutting letter RWH Board

dp constructions (BID ID -1253405)

P.MANOHARAN (BID ID -1254307)

R RAMAMOORTHY (BID ID -1254207)

Bidder Name

R RAMAMOORTHY

P.MANOHARAN

dp constructions

forserviz.com