Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹9.7 L
Closing Date
16 Sept 2026, 5:00 pm
Bangalore Electricity Supply Company Limited
Kavitha R
Construction of BMAZ south zone office complex building S.R. nagar, BESCOM premises, Bengaluru
BESCOM/2026-27/BD/WORK_INDENT1156
BESCOM/2026-27/BD/WORK_INDENT1156
Open
Buildings
Two Tender Document System(Two Cover)
BESCOM Corporate Office Civil Section Bengaluru
11 documents required · 11 mandatory
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
The bidders shall upload the work done certificate for having executed One building work of value not less than Rs. 324.53 lakhs and completed satisfactorily as a prime contractor within stipulated time period in the past 5 years (i.e., F/Y 2021-22 to 2025-26). Work done certificate shall be duly signed by the officer not below the rank of Executive Engineer or equivalent. (Note: Work done amount will be updated to the FY 2026-27 in which the tenders are invited. The value of the completed works will be given a weight of 10% per year to bring them to the price level of the FY 2026-27 in which the tenders are invited)
The bidders shall upload the work done certificate of for minimum quantities of work executed in any one year for following quantities (In a continuous period of 12 months from April to March) in the last 5 years (i.e. FY 2021-22 to 2025-26) the certificate shall be issued by the officer not below the rank of Executive Engineer or equivalent. PCC or RCC - 747.00 Cum, TMT steel reinforcement - 98.20 Tonnes, Burnt brick masonry or Solid block masonry - 234.00Cum or 1166.50 Sqm, Vitrified or Ceramic or Granite flooring - 1645.00 Sqm Plastering - 4475.00 Sqm, Commissioning of minimum 8 passengers lift - 01 No
The bidders shall upload a valid registered KPWD Civil contractor Licence of Class I
The bidders shall achieved turnover for an amount not less than Rs. 865.41 lakhs achieved in any two financial years in the past 5 years (i.e. F/Y 2021-22 to 2025-26) (in all classes of civil engineering construction works only). The Turnover certificate along with Balance sheet and P & L statement of past 5 years for the Civil Engineering works only (i.e. F/Y 2021-22 to 2025-26) issued from a Registered Chartered Accountant (Registered Chartered Accountant PIN and UDIN number must be mentioned failing which bid will be considered as Non-Responsive) should be uploaded. (Note: The turnover amount will be updated to the FY 2026-27 in which the tenders are invited. The Financial turnover of previous years will be given a weightage of 10% per year to bring them to the price level of the FY 2026-27 in which the tenders are invited)
The banker certificate pertaining to Liquid Assets for availability of fund requirement for the work not less Rs.129.81 Lakhs issued by Nationalised / Scheduled Bank for the subject work addressed to General Manager (Civil), Corporate office, BESCOM after 31.07.2026 in the enclosed format
The bidder/tenderer or his identified Sub contractor should upload required valid electrical licence along with consent / undertaking letter for executing building electrification works and should have executed similar electrical works totalling for Rs.20.00 lakhs in any one year in the last 5 years, (i.e. F/Y 2021-22 to 2025-26) signed by the officer not below the rank of Executive Engineer or equivalent for Electrical works
The bidder/tenderer or his identified Sub contractor should have executed similar Water supply / sanitary engineering works /PHE works totalling for Rs. 17.50 lakhs in any one year in the last 5 years, (i.e. F/Y 2021-22 to 2025-26) signed by the officer not below the rank of Executive Engineer or equivalent for Water supply / sanitary engineering works /PHE works
Tenderer should further demonstrate Availability by owning the following key and critical equipment for this work Critical Machineries Total Nos To be owned To be on Lease or Hire or Ownership as per NIT and KW4
Bidder shall upload the self-declaration affidavit as per the enclosed format on the stamp paper of value not less than Rs. 500/- duly notarized stating that a.Not made any misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements.b.Not made any Record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion or financial failures etc.c.Not participated in the previous Tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification.d.No Litigation History or arbitration arising out of contracts completed or under execution by it over the preceding five years.
Bidders who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The bidder shall upload his tender capacity calculation in his letter head along with date and signature with Seal as per the formula Assessed available tender capacity (AxNx1.50-B) Where, A Maximum value of civil engineering works executed in any one year during the last five years updated to 2026-27 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2026-27 price level, of existing commitments and ongoing works to be completed during the next 12 Months.
Any other conditions as per NIT and KW4
Bidder should be in existence as any of the following: Company/LLP/Parternership firm/Sole Proprietorship Concern details as per NIT and KW4
₹5,000
₹9.7 L
4 Sept 2026
17 Aug 2026
17 Sept 2026
7 Sept 2026
28 Aug 2026
Construction of BMAZ south zone office complex building S.R. nagar, BESCOM premises, Bengaluru
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work in surface excavation by mechanical means for lowering and leveling the stilt for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing a...
Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...
ANTI-TERMITE TREATMENT Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, ...
CONCRETE, FORMWORK AND REINFORCEMENT Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite or trap or basalt crushed graded coarse aggregates a...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machin...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machin...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machin...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machin...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machin...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping or welding joints, ...
Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping or welding joints, ...
Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping or welding joints, ...
Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping or welding joints, ...
Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping or welding joints, ...
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...
Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse san
Providing Flush or Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sanafter raking joints to depth nicely lining, including cost of materials, labour, curing as per sp...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg or Cum and minimum compressive strength of 4.00 N or mm2 conforming ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg or Cum and minimum compressive strength of 4.00 N or mm2 conforming ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg or Cum and minimum compressive strength of 4.00 N or mm2 conforming ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg or Cum and minimum compressive strength of 4.00 N or mm2 conforming ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg or Cum and minimum compressive strength of 4.00 N or mm2 conforming ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg or Cum and minimum compressive strength of 4.00 N or mm2 conforming ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg or Cum and minimum compressive strength of 4.00 N or mm2 conforming ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg or Cum and minimum compressive strength of 4.00 N or mm2 conforming ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg or Cum and minimum compressive strength of 4.00 N or mm2 conforming ...
UPVC, STEEL AND GLAZING WORKS
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel prim...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elastom...
Providing and fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elastom...
Providing and fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elastom...
Providing and fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elastom...
Providing and fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elastom...
Providing and fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elastomer...
Providing and fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elastomer...
Providing and fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elastomer...
Providing and fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elastomer...
Providing and fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elastomer...
Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elastomer) and lead fre...
Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elastomer) and lead fre...
Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elastomer) and lead fre...
Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elastomer) and lead fre...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever requireand fitting...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever requireand fitting...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever requireand fitting...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever requireand fitting...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever requireand fitting...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shall be as per gr...
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shall be as per gr...
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shall be as per gr...
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shall be as per gr...
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shall be as per gr...
Designing, fabricating, testing, protection, installing and fixing in position semi (gri unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bui...
Designing, fabricating, testing, protection, installing and fixing in position semi (gri unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bui...
Designing, fabricating, testing, protection, installing and fixing in position semi (gri unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bui...
Designing, fabricating, testing, protection, installing and fixing in position semi (gri unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bui...
Designing, fabricating, testing, protection, installing and fixing in position semi (gri unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bui...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glaze vision panel units of size and shape as required and s...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glaze vision panel units of size and shape as required and s...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glaze vision panel units of size and shape as required and s...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glaze vision panel units of size and shape as required and s...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glaze vision panel units of size and shape as required and s...
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such...
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such...
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such...
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such...
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
DOOR / WOOD WORKS Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement c...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing factory made single extruded WPC (Wood Polymer Compositsolid door or window or Clerestory windows and other Frames or Chowkhat comprising of virgin PVC polymer of K value 58-60...
Providing and fixing factory made single extruded WPC (Wood Polymer Compositsolid door or window or Clerestory windows and other Frames or Chowkhat comprising of virgin PVC polymer of K value 58-60...
Providing and fixing factory made single extruded WPC (Wood Polymer Compositsolid door or window or Clerestory windows and other Frames or Chowkhat comprising of virgin PVC polymer of K value 58-60...
Providing and fixing factory made single extruded WPC (Wood Polymer Compositsolid door or window or Clerestory windows and other Frames or Chowkhat comprising of virgin PVC polymer of K value 58-60...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood Polymer Compositsolid plain flush door shutter of required size comprising...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood Polymer Compositsolid plain flush door shutter of required size comprising...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood Polymer Compositsolid plain flush door shutter of required size comprising...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood Polymer Compositsolid plain flush door shutter of required size comprising...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
DOOR FIXTURE WORKS Providing supply and fixing SS 304 Aldrop - 200mm x 16mm for door shutters including SS screws cost of materials, labour etc., complete as per specifications of vendor and as per ar...
Providing and fixing chromium plated brass handles of 100 or 125 mm with necessary screws etc. complete. Stilt Floor
Providing and fixing chromium plated brass handles of 100 or 125 mm with necessary screws etc. complete. Ground Floor
Providing and fixing chromium plated brass handles of 100 or 125 mm with necessary screws etc. complete. First Floor
Providing and fixing chromium plated brass handles of 100 or 125 mm with necessary screws etc. complete. Second Floor
Providing and fixing chromium plated brass handles of 100 or 125 mm with necessary screws etc. complete. Third Floor
Providing and fixing chromium plated brass handles of 100 or 125 mm with necessary screws etc. complete. Terrace Floor
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. Stilt Floor
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. Ground Floor
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. First Floor
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. Second Floor
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. Third Floor
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. Terrace Floor
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy typ . Stilt Floor
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy typ . Ground Floor
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy typ . First Floor
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy typ . Second Floor
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy typ . Third Floor
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy typ . Terrace Floor
Providing and fixing bright finished brass tower bolts (barrel typwith necessary screws etc. complete :250x10mm. Stilt Floor
Providing and fixing bright finished brass tower bolts (barrel typwith necessary screws etc. complete : 250x10mm. Ground Floor
Providing and fixing bright finished brass tower bolts (barrel typwith necessary screws etc. complete : 250x10mm. First Floor
Providing and fixing bright finished brass tower bolts (barrel typwith necessary screws etc. complete : 250x10mm. Second Floor
Providing and fixing bright finished brass tower bolts (barrel typwith necessary screws etc. complete : 250x10mm. Third Floor
Providing and fixing bright finished brass tower bolts (barrel typwith necessary screws etc. complete : 250x10mm. Terrace Floor
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 200mm. Ground Floor
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 200mm. First Floor
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 200mm. Second Floor
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 200mm. Third Floor
Providing and Fixing Holdfast of size 260mm x 25mm x 5mm
WATERPROOFING WORKS Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coa...
Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace ...
Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace ...
Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace ...
Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace ...
UGT or OHT (insid waterproofing with Anti-microbial Coating Providing and Applying two component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti-algae,...
Polyurethane based water proofing for Retaining Wall
Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moistur...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gaugon terraced roof or sunken slabs,laid to slope compacting, including cost of materials, labour, curing ...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gaugon terraced roof or sunken slabs,laid to slope compacting, including cost of materials, labour, curing ...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gaugon terraced roof or sunken slabs,laid to slope compacting, including cost of materials, labour, curing ...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gaugon terraced roof or sunken slabs,laid to slope compacting, including cost of materials, labour, curing ...
FLOORING WORKS Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectura...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. Gro...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. Fir...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. Sec...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. Thi...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 Percent and conforming to I.S. 15622, of approved make, in all colours and shade...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 Percent and conforming to I.S. 15622, of approved make, in all colours and shade...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 Percent and conforming to I.S. 15622, of approved make, in all colours and shade...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 Percent and conforming to I.S. 15622, of approved make, in all colours and shade...
Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc...
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc...
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc...
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc...
Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...
Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...
Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...
Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 and IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA and for Resi...
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) greater than 78, solar reflection greater than 0.70 and initial emittance greater...
CLADDING WORKS Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse san proportion cut to required shape, pattern ...
Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse san proportion cut to required shape, pattern with paper join...
Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse san proportion cut to required shape, pattern with paper join...
Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse san proportion cut to required shape, pattern with paper join...
Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse san proportion cut to required shape, pattern with paper join...
Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse san and jointed with Adhesive/cement slurry over rough plaster s...
Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse san and jointed with Adhesive/cement slurry over rough plaster s...
Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse san and jointed with Adhesive/cement slurry over rough plaster s...
Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse san and jointed with Adhesive/cement slurry over rough plaster s...
Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse san and jointed with Adhesive/cement slurry over rough plaster s...
FINISHING WORKS Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sanincluding rounding off corners wherever required smooth rendering, provid...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing ...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing ...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing ...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing ...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing ...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sanand a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 ce...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sanand a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 ce...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sanand a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 ce...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sanand a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 ce...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sanand a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 ce...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine san on concrete surface or ceilings including rounding off corners wherever required smooth rendering, providing and removing...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine san on concrete surface or ceilings including rounding off corners wherever required smooth rendering, providing and removing...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine san on concrete surface or ceilings including rounding off corners wherever required smooth rendering, providing and removing...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine san on concrete surface or ceilings including rounding off corners wherever required smooth rendering, providing and removing...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine san on concrete surface or ceilings including rounding off corners wherever required smooth rendering, providing and removing...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g or m2 width, along route of walls chipped f...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g or m2 width, along route of walls chipped f...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g or m2 width, along route of walls chipped f...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g or m2 width, along route of walls chipped f...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g or m2 width, along route of walls chipped f...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams or litre of approved brand and manufacture, including applying ...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams or litre of approved brand and manufacture, including applying ...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams or litre of approved brand and manufacture, including applying ...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams or litre of approved brand and manufacture, including applying ...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams or litre of approved brand and manufacture, including applying ...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt and pick up resistant, Alkali and Water resistant of required shade: ...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt and pick up resistant, Alkali and Water resistant of required shade: ...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt and pick up resistant, Alkali and Water resistant of required shade: ...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt and pick up resistant, Alkali and Water resistant of required shade: ...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt and pick up resistant, Alkali and Water resistant of required shade: ...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L/10 m²) over and including priming coat of exterior primer applied at 2.20kg/10 m² to give an...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L/10 m²) over and including priming coat of exterior primer applied at 2.20kg/10 m² to give an...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L/10 m²) over and including priming coat of exterior primer applied at 2.20kg/10 m² to give an...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90L or 10 m² over an under coat of primer applied at 0.75 L or 10 m² of approved brand and manufacture ...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90L or 10 m² over an under coat of primer applied at 0.75 L or 10 m² of approved brand and manufacture ...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90L or 10 m² over an under coat of primer applied at 0.75 L or 10 m² of approved brand and manufacture ...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90L or 10 m² over an under coat of primer applied at 0.75 L or 10 m² of approved brand and manufacture ...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90L or 10 m² over an under coat of primer applied at 0.75 L or 10 m² of approved brand and manufacture ...
Providing and fixing SFRC frame and cover conforming to IS 12592 (part- -1988 and IS 12592 (part-I - 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing...
Providing and fixing of PVC Rungs footrest in under ground tanks / manhole using M20 concrete bed blocks for masonry walls or during construction for RCC surfaces, including cost of materials, labour,...
DEMOLITION and DISPOSAL WORKS Demolishing R.C.C. work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per...
Demolishing R.C.C. work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge...
Demolishing brick work manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-...
Demolishing brick work manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-...
Dismantling doors, windows and clerestory windows (steel or woo shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engi...
Dismantling doors, windows and clerestory windows (steel or woo shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engi...
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking to the approp...
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking to the approp...
Demolishing cement concrete manually or by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.
Demolishing cement concrete manually or by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles 10 mm to 25 ...
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge.
For thickness of tiles 10 mm to 25...
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge. G.S. Sheet. Ground Floor
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material to the appropriate disposal area as per direction of Engineer-in-charge. 75 to 80 mm dia pipe
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material to the appropriate disposal area as per direction of Engineer-in-charge.
75 to 80 mm dia pipe
Dismantling chain link fencing including removing the posts, cement concrete fedestals, foundation and stacking the useful materials safely at a distance to the appropriate disposal area as per direct...
Dismantling weather proof course and removing and conveying the debris to a distance to the appropriate disposal area as per direction of Engineer-in-charge.
Demolishing stone rubble masonry manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of...
Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all lead and li...
Cleaning surface drains including removing of dirt dust etc., using suitrable soap powder, coconut broomstick, squeezers / wipers/ rubber brushes, coir brushes, plastric brushjes, mugs, booster pumps ...
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as a...
INTERIOR WORKS PARTITION WORKSGypsum partiition Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of sp...
Cavity wall insulation with Rock Wool Slab (75mm)
Providing and fixing rock wool slab 75mm thick resin bonded rock wool slab having density 36+/-5 kg/Cum for insulation of cavity wall with including n...
Cavity wall insulation with Rock Wool Slab (75mm). Providing and fixing rock wool slab 75mm thick resin bonded rock wool slab having density 36+/-5 kg/Cum for insulation of cavity wall with including ...
Cavity wall insulation with Rock Wool Slab (75mm). Providing and fixing rock wool slab 75mm thick resin bonded rock wool slab having density 36+/-5 kg/Cum for insulation of cavity wall with including ...
Cavity wall insulation with Rock Wool Slab (75mm). Providing and fixing rock wool slab 75mm thick resin bonded rock wool slab having density 36+/-5 kg/Cum for insulation of cavity wall with including ...
FULLY GLAZED PARTITION WITH TOUGHENED GLASS and ALUMINIUM CHANNELS Providing and fixing full height glass partition with 12mm thick clear toughened glass as per design fitted over aluminium channels...
FRAMELESS TOUGHENED GLASS DOOR WITH SINGLE SHUTTER Providing and fixing 12 mm thick frameless toughened glass door of approved brand and manufacture, consists of necessary aluminium side hinges, all f...
FRAMELESS TOUGHENED GLASS DOOR WITH DOUBLE SHUTTER Providing and fixing 12 mm thick frameless toughened glass door of approved brand and manufacture, consists of necessary aluminium side hinges, all f...
FALSE CEILING WORKS GYPSUM CEILING Providing and fixing Gypsum false ceiling as per India Gypsum specification for ceiling with drops as per drawing including of providing and fixing aluminium Frame w...
Square open cell ceiling : supply of LD square make 100mmx100mm open cell ceiling system of 0.4 mm GI thickness and 40mm HT , U bend with U SiZe 8mmx 40x40 in Powder coated finish of approved shade...
Mesh ceiling : supply of LD square make Expandable Flat mesh ceiling made of 0.8mm CRCA sheet to form a hex formation of 7mm/10mm Honeycomb Structure the tile to powder coated in any regular matt fini...
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on ...
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on ...
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on ...
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on ...
LACQUERED GLASS PANELLING Providing and fixing 4mm thick lacquered glass panelling formed using with 19 mm thick commercial ply back support including Aluminium 'U' sections(6mmX6mm) at Intermediate ...
Providing and Fixing 12 mm thick Vivre louvered panels of approved make, colour and design (as per architects choic on existing wall including 12 mm Ply back support necessary frame work including co...
Providing and Fixing 12 mm thick Acoustic Wall paneling of approved make, colour and design (as per architects choic on existing wall including 12 mm Ply back support and necessary aluminum frame wor...
Providing and Fixing 12-20 mm wide Aluminum Strips for Acoustic wall Panels as per approved make, design and instructions of engineer in charge.
Providing and Fixing 50 mm Depth Aluminum 'J' profile Skirting as per approved make, design and instructions of engineer in charge.
FURNITURE WORKS LINEAR WORKSTATIONS Providing and placing non sharing linear workstation with screen consisting of 25mm thick pre laminated particle board with 2mm edge banding with 50X50mm powdercoat...
L Shaped Workstation Providing and placing L shape Workstation consisting of 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges with MS powder coated end support leg...
EXECUTIVE CABIN TABLE Providing, upplying and Placing of Senate Executive Table consisting of Main Desk2000mmL 800mmD 780mmH PLB MDF Table top with Side tableStorage unit1010mmL 500mmD 652mm H.The ...
Cabin Tables.Providing and installing Cabin Table consisting of 25mm thick Pre laminate particle board table top with 2mm PVC edge lipping on all exposed edges with MS powder coated end support legs,...
Cabin Tables.Providing and installing Cabin Table consisting of 25mm thick Pre laminate particle board table top with 2mm PVC edge lipping on all exposed edges with MS powder coated end support legs,...
Table for Anteroom. Providing and installing Table consisting of Melamine foil table top with powder coated steel underframe complete as per specifications, drawings and as directed by Engineer in ch...
Mobile pedestal unit.Providing and fixing 400mm w X 450mm d X 650mm ht ) Mobile pedestal unit made up of 18mm thick PLPB with edge bonded for body, Two equal drawer and filing drawer with centralized ...
Conference Table.Providing and fixing conference table consisting of 19 mm double thick Ply table top edge bounded with 6 mm thick CORIAN top finish at top area and at sides with 45mm depth corian fin...
Chairs for Anteroomroviding and placing chair made of solid wood and cushion seat ( Leatherette/Fabri with Metal powder coated legs. Size : 650mmW x 550mm D x 790mm H. Make:Featherlite(Bosco) / Equiv...
MEDIUM BACK CHAIR Supplying Medium Back Mesh Chair with Adjustable Arms of size 585mm(L)x585mm(W)x1015mm( with One Way Height Adjustable Arms with soft PU Padding, AN 70 Mesh for Breathability Fabri...
CABIN CHAIR Supplying High Back Mesh chair of size 660mm(L)x660mm(W)x1050mm( with cushion seat and mesh back with Height adjustable arm rests and chrome plated metal base with Pnuematic height adjust...
EXECUTIVE CHAIR Supplying High Back Mesh Chair with Dynaflex Back Support to Provide Dual Frame Flexibility and Multilock Mechanism having size of 660mm(L)x660mm(W)x1255mm( with Fabric Upholstered ...
Fabric sofa Two seater Providing and fixing Two seater Sofa with cushion of size 5(L)x2.5(W)X2.75( ft made of upholstery fabric with seats fitted with padding,springs, webbing and as per direction of...
Fabric sofa Three seater Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W)X2.75( ft made of upholstery fabric with seats fitted with padding,springs, webbing and as per directio...
Fabric sofa Three seater Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W)X2.75( ft made of upholstery fabric with seats fitted with padding,springs, webbing and as per directio...
Fabric sofa Three seater Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W)X2.75( ft made of upholstery fabric with seats fitted with padding,springs, webbing and as per directio...
TEA TABLE Providing and fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm ...
Side Table Providing and placing Engineered Wood Side Table with powder coated metal leg support and Table Frame Material Subtype with MDF without storage having table Size of 558mmW X 406mmW X 445m...
5 BAY MOBILE RACK COMPACTOR Providing, supplying and fixing of mobile rack compactor of approved make of following features complete including cost of material installation, etc as per instruction of ...
5 BAY MOBILE RACK COMPACTOR Providing, supplying and fixing of mobile rack compactor of approved make of following features complete including cost of material installation, etc as per instruction of ...
5 BAY MOBILE RACK COMPACTOR Providing, supplying and fixing of mobile rack compactor of approved make of following features complete including cost of material installation, etc as per instruction of ...
5 BAY MOBILE RACK COMPACTOR Providing, supplying and fixing of mobile rack compactor of approved make of following features complete including cost of material installation, etc as per instruction of ...
Storage Units Providing and fixing storage unit of 450mm depth made out of 19mm thick Approved commercial ply for shutters, sides, bottom, Compartments and Drawers finished with Acrylic laminate (Ap...
Providing and fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of En...
Providing and fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of En...
Providing and fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of En...
Providing and fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of En...
BOREWELL WORKS Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by ad...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG and above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes,...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG and above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes,...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG and above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes,...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG and above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes,...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG and above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes,...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG and above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes,...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (partI 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). ...
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl and Impeller with Low volt Motor as per specifications, to work site as per necessar...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathe of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x2.5 ...
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPV pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing ...
Providing and fixing gun metal non- return valve of approved quality. (screwed en . 50 mm nominal bore horizontal
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...
Providing wrought mild steel (galvanize GI collar confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI collar:
Supply and delivery at site wrought middle steel (galvanize GI bend confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI BEND
Supply and delivery at site wrought middle steel (galvanize GI union confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI Union
HT ELECTRICAL WORKS Supply and installation of of Compact RMU (VCB or SF6 Typ with Copper Busbar, 350 MVA, 630 Amps as per IEC62271 or IS to 3427. 3Way RMU, 2 OD + 1 VL (One Incomer + One Breake...
Supply and making of 11KV ( Extruded X linked for tubing and moulded and cross to linked components using Heat Shrink Stress Control tube having High Permitivity XLPE Terminations to INDOOR an...
HT Cable 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS to 7098 (Part to 2) Armouring wires dia and Resistivity as per IS to 3975. 3Cx95sqmm
Construction of platform with size stone, cement concert for erection of 500 kVA Transformer or Metering cubicle or Heavy Equipment. Construction of platform (1.5x1.5x1.2) Mtr in size stone, for erect...
Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts and nuts, the free ends shall be welded to the Pole and block pipe at to...
Spreading of Jelly to Supplying and spreading 100mm thick with 20 to 25m jelly with all lead and lifts.
Supply, erection, testing and commissioning of........ KVA 5Star rated aluminum wound Distribution Transformer 11KV or 433V with Off Load Tap Switch, Buchholtz relay winding temperature indicator, oi...
Transporting, Positioning of RMU (Conventional) unit from store to work spot including loading, unloading. (No separate crane charges) in co to ordination with site Incharge. Upto 5 panel
LT ELECTRICAL WORKS PVC CONDUITS and ITS ACCESSORIES Open conduit System Supplying heavy gauge PVC conduit pipe ……dia....mm thick confirming to IS 2509 with suitable size bends, junction boxes, ...
Supplying heavy gauge PVC conduit pipe ……dia....mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesives paste etc., and fixing using inverted wood plugs in case of RCC ...
Supplying heavy gauge PVC conduit pipe ……dia....mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesives paste etc., and fixing using inverted wood plugs in case of RCC ...
Supplying heavy gauge PVC conduit pipe ……dia....mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesives paste etc., and fixing using inverted wood plugs in case of RCC ...
Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals or PVC junction boxes, adhesives paste etc., and running before concreting th...
Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals or PVC junction boxes, adhesives paste etc., and running before concreting th...
Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals or PVC junction boxes, adhesives paste etc., and running before concreting th...
Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals or PVC junction boxes, adhesives paste etc., and running before concreting th...
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and c...
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and c...
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and c...
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and c...
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable or conduit entry as required with one coat of primer of approved make etc.
Supplying and fixing PVC or metal conduit deep junction box.
19 or 20mm deep junction box
Supplying and fixing PVC or metal conduit deep junction box.
25mm deep junction box
Supplying and fixing PVC or metal conduit deep junction box.
32mm deep junction box
Extra for Groove cutting in brick wall or cc floor to the suitable depth for concealing of Conduit or GI pipe and plastering, finishing the wall upto wall surface complete. upto 50mm conduit in CC Fl...
Supplying and fixing Metal fan box with round hook.
Supplying and wiring adopting loop system in existing PVC Conduit or casing capping using 2x1.5Sqmm (Phase and Neutral) and 1 x1.0Sqmm (Earth wir FRLS multi strand PVC insulated copper wire (conf...
Supplying and wiring adopting loop system in existing PVC Conduit or casing capping using 2x1.5Sqmm (Phase and Neutral) and 1 x1.0Sqmm (Earth wir FRLS multi strand PVC insulated copper wire (conf...
Supplying and wiring adopting loop system in existing PVC Conduit or casing capping using 2x1.5Sqmm (Phase and Neutral) and 1 x1.0Sqmm (Earth wir FRLS multi strand PVC insulated copper wire (conf...
Supplying and wiring adopting loop system in existing PVC Conduit or casing capping using 2x1.5Sqmm (Phase and Neutral) and 1 x1.0Sqmm (Earth wir FRLS multi strand PVC insulated copper wire (conf...
Supplying and wiring adopting loop system in existing PVC Conduit or casing capping using 2x1.5Sqmm (Phase and Neutral) and 1 x1.0Sqmm (Earth wir FRLS multi strand PVC insulated copper wire (conf...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS...
Supplying and Drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130 to 1984 and (virgin) PVC insulation and ...
Supplying and Drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130 to 1984 and (virgin) PVC insulation and ...
Supplying and Drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130 to 1984 and (virgin) PVC insulation and ...
SWITCHES, SOCKETS and ACCESSORIES Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due g...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps one way
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps Two way
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket...
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. Stepped fan regul...
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. 32A,DP,Switch
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way sw...
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. 6 or 16Amps unive...
Supplying and fixing or replacing of 6 or 16 or 32A electrical accessories on existing switch board. 6A Batten holder
Supplying and fixing or replacing of 6 or 16 or 32A electrical accessories on existing switch board. 6A Bell push
Supplying and fixing or replacing of 6 or 16 or 32A electrical accessories on existing switch board. 6A Bell Buzzer
CONTROL SWITCH GEARS and ACCESSORIES Supplying push button operated, direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic ...
Supplying and fixing regular MCB distribution panel confirming to IS 8828 , on wall or wood board or flush mounting using required clamps, bolts, nuts etc.. With provision for fixing of suitable type...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON or OFF, energy cross to 3 with short circuit break...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON or OFF, energy cross to 3 with short circuit break...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON or OFF, energy cross to 3 with short circuit break...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON or OFF, energy cross to 3 with short circuit break...
Supplying and fixing regular MCB distribution boards on wall or wood board or flush mounting using required clamps, bolts ,nuts etc., with provision for fixing suitable type capacity MCB'S single ...
Supplying and fixing regular MCB distribution boards on wall or wood board or flush mounting using required clamps, bolts ,nuts etc., with provision for fixing suitable type capacity MCB'S single ...
Supplying and fixing regular MCB distribution boards on wall or wood board or flush mounting using required clamps, bolts ,nuts etc., with provision for fixing suitable type capacity MCB'S single ...
Supplying and fixing regular MCB distribution boards on wall or wood board or flush mounting using required clamps, bolts ,nuts etc., with provision for fixing suitable type capacity MCB'S single ...
Supplying, fixing and wiring Residual Current Circuit Breaker [RCCB] 240 or 450V up to 300mA sensitivity on existing wood or panel Board. 32 to 40Amps 2 pole
Supplying, fixing and wiring Residual Current Circuit Breaker [RCCB] 240 or 450V up to 300mA sensitivity on existing wood or panel Board. 32 to 40Amps 4 pole
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron ….and M.S. flat with bolts, washers etc… and painted with 2 coats of red oxide and then two coats of approved paint. 40...
Supplying and fixing of metal Socket set of 2 pole and earth plugs and socket for incorporating SP and TP MCB (without MC . The entire Plug and Socket shall be mounted in athermoplastic or powder co...
Supplying and fixing of metal Socket set of 2 pole and earth plugs and socket for incorporating SP and TP MCB (without MC . The entire Plug and Socket shall be mounted in athermoplastic or powder co...
L.T. U.G. CABLES AND EARTHING Supplying fixing and wiring earth electrode for grounding of DG Sets etc. using 40mm dia 2.9mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reduc...
Supplying and running of GI or Copper strips for grounding connections, using necessary fixing materials as required.
GI strip. 25x3mm
Supplying and running of GI or Copper strips for grounding connections, using necessary fixing materials as required.
GI strip. 40x6mm
Supplying and running of GI or Copper strips for grounding connections, using necessary fixing materials as required.
CU strip. 25x3mm
Supplying and running of GI or Copper strips for grounding connections, using necessary fixing materials as required.
600x600x3mm GI Plate
Supplying and running of GI or Copper strips for grounding connections, using necessary fixing materials as required.
600x600x3mm CU Plate
Supplying, Fixing and proper termination of vertical Air to termination using Gunmetal ball with finials of 5 spikes mounted on 2 mtrs long copper rod, mounted at the highest point of the building, ...
Supply and fixing Test Link as per specification and drgs. and grouted to wall at 1200 mm. above ground level complete with all fixing accessories, clamps, screws etc, enclosed in M.S box.
Supplying and Fixing Chemical earthing for grounding, conduits, IC cut outs and other equipments backfill compound which is non to corrosive, thermally conductive, potential to permissible limits,...
Supplying and running GI or Copper conductor for grounding and (along with other wires in conduit system of wirin using necessary suitable size clamps, nails, guttas or spacers etc. 8 SWG GI wire.
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS to 1554 (Part1) or IS to 7098 Part to 1, Armouring strip thickness and resistivity as...
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS to 1554 (Part1) or IS to 7098 Part to 1, Armouring strip thickness and resistivity as...
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS to 1554 (Part1) or IS to 7098 Part to 1, Armouring strip thickness and resistivity as...
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS to 1554 (Part1) or IS to 7098 Part to 1, Armouring strip thickness and resistivity as...
Laying of cable in Existing Trench or GI pipe or Stone Ware or RCC Hume pipe using Wooden or Aluminum Rollers as directed by the departmental staff. 2.5 sqmm to 25 sqmm
Laying of cable in Existing Trench or GI pipe or Stone Ware or RCC Hume pipe using Wooden or Aluminum Rollers as directed by the departmental staff. 35 sqmm to 95 sqmm
Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...
Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all to round the cable.
Supplying and fixing of Brass Cable Gland. 25mm
Supplying and fixing of Brass Cable Gland. 32mm
Supplying and fixing 2 mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts or nuts and washer or welding as required. 150x50mm
Supplying and fixing 2 mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts or nuts and washer or welding as required. 300x50mm
Supply and laying of underfloor (conceale or Above false ceiling raceways manufactured from 1.5 mm thick cover and base (including partitions for multicompartment raceways), zero spangle pre to gal...
Supply and laying of underfloor (conceale or Above false ceiling raceways manufactured from 1.5 mm thick cover and base (including partitions for multicompartment raceways), zero spangle pre to gal...
Supply and laying of under floor junction boxes shall be of three to piece construction Base box, frame and load plate. Base box shall be robust in its construction manufactured from 1.5 mm thick zer...
Supply, termination of Aluminium End Terminal (Lu . 1.5 to 10 sq.mm
Supply, termination of Aluminium End Terminal (Lu . 16 sq.mm
Supply, termination of Heavy Duty Copper Terminal Long Barrel. 50 sq.mm Long barrel
FIXING CHARGES Fixing charges of Post top or gate or garden fitting or LED on the existing CI or GI or any other pipe using required size of reducer, wiring using suitable wires.
Fixing all types and all capacities fluorescent or false ceiling or spot light or CFL or LED fittings indoor on the wall or ceiling or rafters or girders using 23 or 0.00076 " twin twisted P...
Fixing a ceiling or wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing a 5 amps ceiling rose, necess...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 or 0.0076 inch PVC insulated twin core wire.
Using 2 Mtr long 19mm 18SWG enamelled braised conduit of two nos. rod pendent with ball socket with check nuts all nickel painted.
Extra length of GI pipe of class b 19mm dia for down rod.
FIRE EXTINGUISHERS to Supply and Providing 4.5Kg C02 Gas Type aluminium body Squeeze grip Fire Extinugisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Wei...
Supplying of two bucket stand alongwith buckets. Complete
Supplying of Hand gloves. Complete
Supplying of first aid box. Complete
Supplying of SAFETY MASK. Complete
Supplying of FIRST AID CHART with lamination. Complete
Supplying and installation of RUBBER MAT 1mtrx1mtr to 1Omm thick. complete including cost of materials, labour, usage charges of machinery complete as per specifications.
LED LUMINAIRS or LIGHT FIXTURES and ACCESSORIES AND FANS Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applica...
Supplying of 2' feet to LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours and 70 percent lumen maintenance with CRI more than 8. Power Input : 220 to 240V ...
Supplying of 2' feet to LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours and 70 percent lumen maintenance with CRI more than 8. Power Input : 220 to 240V ...
Supplying of 2' feet to LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours and 70 percent lumen maintenance with CRI more than 8. Power Input : 220 to 240V ...
Supply of round or square recess or surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector ...
Supply of round or square recess or surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector ...
Supply of round or square recess or surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector ...
Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast or extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 d...
FANS Supplying exhaust fan of 1440RPM heavy duty with bracket blades complete for lighting duty suitable to operate on 230V 50Hz, AC supply 12" sweep (300mm).
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374 or 79 and also comply with IS:1709 or 1984 with latest amendment, Rated voltage 220 V per 50 Hz, Rated ...
Supplying wall mounting fan suitable to operate at single phase 230v AC supply. 400mm Sweep
Supply of LED Street light with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded and is made of polycarbonate material w...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Fabricating, supplying and erection of… Mtrs long hot dip Galvanized Conical Pole with BSEN 10025 grade S355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, includin...
Supplying and fixing of Hot Dip Galvanized M.S Bracket suitable for out door luminairs and mounted on octoganal pole using necessary bolts, nuts etc…. Complete Single Arm Bracket with 1000mm Stand...
LT PANEL WORKS: Design, manufacture, supplying, fixing in position, testing and commissioning of following MV switchgear panels made up of 14G, suitable for 415 V, 3 phase, 4 wire, 50 Hz power distri...
Fabricating supplying and mounting MS box made out … SWG suitable for floor or wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equip...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron… and M S flat …….. With bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved pai...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron… and M S flat …….. With bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved pai...
Supply of on load change over switches 4 poles, AC to 23A duty, 415v, 50Hz, AC supply. (Open Execution). 100Amps
Supply and fixing Moulded Case Circuit Breaker (MCC over the existing wood or panel board using necessary screws, bolts, nuts and wiring complete. Protection of overload and short circuit with therma...
Supply and fixing Moulded Case Circuit Breaker (MCC over the existing wood or panel board using necessary screws, bolts, nuts and wiring complete. Protection of overload and short circuit with therma...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220V AC, 50Hz 12 or 24V DC.
Supplying, fixing and wiring 3 phase Digit Digital Ammeter or Voltmeter.
Supplying, fixing and wiring 50 or 5A to 400 or 5A 5VA burden current transformer class 0.5 accuracy with Tape wound.
Supplying of multi function Meter digital three line back light LCD type display of voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with IP 54 ...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50Hz AC with latest microcontroller based, digital read out of percentage leakage curr...
Supplying …….amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic or FRP or DMC insul...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON or OFF, energy cross to 3 with short circuit break...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON or OFF, energy cross to 3 with short circuit break...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON or OFF, energy cross to 3 with short circuit break...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON or OFF, energy cross to 3 with short circuit break...
Supply and fixing of 4 pole contactor with No or NC contacts on existing wood or panel board using necessary bolts, nitsm washers and wiring etc, complete with AC to 3 rating and as per IS to 13947...
Supplying, fixing and wiring heavy duty low voltage capacitors confirming to IS 2834. 3 phase, 400 or 440 volts grade, for power factor improvement of rotating machinery.
Supplying, fixing and wiring Automatic Power Factor controller fully, static units controilled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and ...
UPS, BATTERIES Supplying, erecting, testing and commissioning of ON to LINE UPS System suitable for operation on 415V Input and 415V, Output, 50Hz, A or C supply with Isolation Transformer all access...
Supplying, installation, testing and commissioning of 12volts DC AH Batteries in poly propylene container for UPS Low maintenance Tubular or smf batteries. 12V, 100 AH Capacity. Acid battery.
DG SET WORKS Supplying, installing, testing and commissioning of Diesel Generator set with following specification. Power rating as per standard reference condition as per BS 5514 or ISO 3046 or ISO 8...
Supplying, erection, testing and commissioning of AMF Panel for ..... kVA DG Set. The panel is of cubical type base or floor mounting control panel with hinged doors, undrilled bottom gland plate, a...
CAMERAS and ACCESSORIES Supply, Installation, Testing and Commissioning of 1 or 3 inch progressive scan CMOS, 5.0 megapixel, IP based Colour camera, Up to 30 m IR range, Color: 0.01Lux, 1000TVL, D...
Supply, Installation, Testing and Commissioning of 24port 10 or 100 or 1000 Smart POE Switch with 4 SFP (192W)for camera connection including all necessary accessories.
Supply, Installation, Testing and Commissioning of NVR (Networkable Video Recorder) to 16Channel NVR, Up to 16ch IP cameras input, Up to 5 Megapixels resolution recording, HDMI and VGA output at up...
Supply, Installation, Testing and Commissioning of HDMI, 4K, Display Monitor 40 inch high resolution, Monitor with all mounting bracket accessories.
Supplying and drawing UTP CAT 6 LAN cable.
NETWORKING AND COMMUNICATION : Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc. on existing modular switch plate as per IS 3854 a...
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293.
RJ45 or I.O. outl...
Supplying and drawing UTP CAT 6 LAN cable.
Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable. 5 Pair
Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable. 20 Pair
Supplying and drawing PVC insulated gas injected physical foam jelly flooded co to axial TV cable. RG to 6.
Supplying and fixing of switch mounting rack with power manager and cable manager. 6U with 450mm depth
Supplying and fixing of switch mounting rack with power manager and cable manager. 9U with 450mm depth.
Supplying and fixing of power strip.
Supplying and fixing of fan.
Supplying fixing of Network Switches.10 Port Gigabyte (Manageabl .
Supplying fixing of Network Switches. 24 Port Gigabyte (Manageabl .
Supplying and fixing of mtrs Cat6 Patch Cable. 1 mtr
Supplying and fixing of mtrs Cat6 Patch Cable. 2 mtr
Supplying and fixing of Patch Panel for LAN cabling. 24 Port 10 or 100 or 1000 Patch Panel
Supplying and Fixing of MDF Krone junction box with KRONE module or Telephone cable termination. 20 pair
AIR CONDITIONING WORKS Supplying of TR Invertor type split Air conditioners suitable for operation on A or C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air coole...
Supplying of TR Invertor type split Air conditioners suitable for operation on A or C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R41...
Supplying of TR Invertor type split Air conditioners suitable for operation on A or C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R41...
Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split or cassette type A or C.
Supplying and installation of insulated refrigerant copper tubing of 5 or 8" and 3 or 8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil a...
Extra for Fabrication supply and fixing of Stand fabricated using slotted angle or L angle of size 6mm x 50mm for mounting out door or indoor A.C. unit or Batteries.
LIFT WORKS (ELEVATORS) Design, supplying, erecting testing and commissioning of to Passenger or Bed to cum to passenger hospital lift with speed of 1mtr per second, variable voltage variable frequ...
PHE WORKS Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the ...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the ...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the ...
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fi...
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fi...
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fi...
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fi...
Providing and fixing CP health faucet with flexible hose,CP Bibcock with 2 in 1 connectvity, wall flange, supporting hook with screws, fixing materials and sealant to all sides of wall flange complete...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. Ground Floor
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. First Floor
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. Second Floor
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. Third Floor
Providing and fixing C.P. brass stop cock (conceale of standard design and of approved make conforming to IS:8931. Ground Floor
Providing and fixing C.P. brass stop cock (conceale of standard design and of approved make conforming to IS:8931. First Floor
Providing and fixing C.P. brass stop cock (conceale of standard design and of approved make conforming to IS:8931. Second Floor
Providing and fixing C.P. brass stop cock (conceale of standard design and of approved make conforming to IS:8931. Third Floor
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers compl...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers compl...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers compl...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers compl...
Supplying, shifting to the place of installation and fixing testing and commissioning of stainless steel soap dish 150 x 150mm including cutting and setting in walls with cement joints and making g...
Providing and fixing Towel rail (Circular) made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class. Class - Economy. Ground Floor
Providing and fixing Towel rail (Circular) made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class. Class - Economy.First Floor
Providing and fixing Towel rail (Circular) made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class. Class - Economy.Second Floor
Providing and fixing Towel rail (Circular) made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class. Class - Economy.Third Floor
Providing and fixing Stainless Steel A ISI 304 (18 or 8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and maki...
Providing and fixing Stainless Steel A ISI 304 (18 or 8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and maki...
Providing and fixing Stainless Steel A ISI 304 (18 or 8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and maki...
Providing and fixing Sink cock with swivel spout and wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class (Prem...
Providing and fixing Sink cock with swivel spout and wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class (Prem...
Providing and fixing Sink cock with swivel spout and wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class (Prem...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40mm Dia.Ground Floor
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40mm Dia.First Floor
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm Dia.Second Floor
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm Dia. Third Floor
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark and with its latest amendments. Ground Floor
Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark and with its latest amendments. First Floor
Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark and with its latest amendments. Second Floor
Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark and with its latest amendments. Third Floor
Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments. Ground Floor
Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments. First Floor
Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments. Second Floor
Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments. Third Floor
Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments. Ground Floor
Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments. First Floor
Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments. Second Floor
Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments. Third Floor
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark and with its latest amendments. Ground Floor
Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark and with its latest amendments. First Floor
Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark and with its latest amendments. Second Floor
Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark and with its latest amendments. Third Floor
Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments. Ground Floor
Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments. First Floor
Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments. Second Floor
Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments. Third Floor
Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments. Ground Floor
Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments. First Floor
Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments. Second Floor
Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments. Third Floor
Providing and fixing, testing and commissioning u PVC multi inlet floor trap 75mm dia conforming to IS 13592 with required P C C support placed to required level as per site condition complete.
Supplying and fixing PVC P' trap 110mm dia, of self cleansing design with or without vent arm complete including cutting and making good the walls and floors.
Providing and Fixing in position heavy duty C P grating 125mm dia, with frame of below mentioned sizes including jointing and fixing material complete.
Providing and grouting sleeves made in beam or slab to draw waste and soil lines at all floor level of the below mentioned sizes, including condcting water ponding test to ensure zero leakage with al...
Providing and fixing chlorinated poly vinyl chloride ( CPV pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe ...
Providing and fixing chlorinated poly vinyl chloride ( CPV pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe ...
Providing and fixing chlorinated poly vinyl chloride ( CPV pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe ...
Providing and fixing chlorinated poly vinyl chloride ( CPV pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
20mm nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20mm nominal bore. First Floor
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20mm nominal bore. Second Floor
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20mm nominal bore. Third Floor
Providing and fixing chlorinated poly vinyl chloride ( CPV pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
Providing and fixing chlorinated poly vinyl chloride ( CPV pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
Providing and fixing chlorinated poly vinyl chloride ( CPV pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
Providing and fixing chlorinated poly vinyl chloride ( CPV pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
Providing and fixing chlorinated poly vinyl chloride ( CPV pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
25 mm dia pipe nominal OD pipes. Ground Floor
25 mm dia pipe nominal OD pipes. Second Floor
25 mm dia pipe nominal OD pipes. Third Floor
25 mm dia pipe nominal OD pipes. Terrace Floor
32 mm dia pipe nominal OD pipes. Ground Floor
32 mm dia pipe nominal OD pipes. First Floor
32 mm dia pipe nominal OD pipes. Second Floor
32 mm dia pipe nominal OD pipes. Third Floor
40 mm dia pipe nominal OD pipes
50 mm dia pipe nominal OD pipes
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed en : 25mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed en : 32mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed en : 40mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed en : 50mm nominal bore
Providing and placing on terrace, polyethylene water storage tanks As per IS 12701 Marked with cover and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over f...
Supplying and fixing suction Y' or pot stainer with MS flange of suitable length fabricated from 16 gauge brass sheet with 3mm slots. 50 mm dia
Supplying, fixing, testing and commissioning of PVC welded rain water head or khurras dome type grating with puddle flange to fix head in RCC slab specially fabricated from minimum 4mm thick PVC she...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 160 mm dia PVC couplers as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark and with its latest amendments.
Supply and delivery at site special moulded variety 160mm dia PVC elbows as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments.
Supply and delivery at site special moulded variety 160 mm dia PVC tee as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments.
Providing and fixing Square mouth stone ware gully trap SP-1 Complete with CI Grating Brick Masonry Chamber 100x100mm Size P trap With Non modular common burnt bricks of designation 3.5, with water t...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse san C.I. cover with frame (light duty) 455x610 mm internal d...
Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland or Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of appr...
Earth work in surface excavation for stripping, seating of bund, Road way by manual means for lowering and levelling the ground for all works other than foundation and depth in Ordinary rock and ...
DOMESTIC WATER TRANSFAR PUMP Supplying, installing, testing and commissioning of submersible or Mono blockelectrical driven pump 1set . (1 working and standby) domestic water pumps for pumping do...
Providing and fixing gun metal non- return valve of approved quality (screwed end) 32 mm nominal bore Vertical
Providing and fixing gun metal non- return valve of approved quality (screwed end) 40 mm nominal bore Vertical
Construction of percolation well or rain water harvest pit of 2 m dia and 3m deep with precast RCC rings, coveringthe top with RCC slab including supply and fixing 600 x 600 RCC MH cover CI or MS ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT BMAZ South.docx
Instructions to Tenderers • 0.05 MB
Banker Certificate Format.pdf
Others - Banker Certificate • 0.02 MB
Self declaration format.docx
Others - Self Declaration format • 0.01 MB
KW4 BMAZ South.docx
Tender Document • 0.55 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .