Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹2.2 L
EMD Value
₹4,380
Closing Date
19 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer (C)
2nd Floor, Telephone Bhavan, Port Blair
Providing Aluminium mosquito proof net with frame and shutters, replacing of existing IWC to EWC, and providing water mixer in all bathrooms and other allied civil works at CGM Bunglow, Port Blair
2024_BSNL_185793_1
28/NIT/CD-PB/AN/2023-24
Open Tender
Civil Works
Item Rate
30 days
BSNL Bhavan, Port Blair
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Accounts Officer (Cash), BSNL, Port Blair
₹4,380
21 Feb 2024
12 Feb 2024
21 Feb 2024
12 Feb 2024
19 Feb 2024
12 Feb 2024
12 Feb 2024 - 17 Feb 2024
Amount
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (a) All kinds of soil (i) Pipes, cables etc, not exceeding 80 mm dia.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. (a) For thickness of tiles 10 mm to 25 mm
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. (a) Internal Work- Exposed on wall
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
Centering and shuttering including strutting, propping etc. and removal of form for : (a)Shelves (Cast in situ)
Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : (a) W.C. pan with ISI marked white solid plastic seat and lid
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia
Providing and fixing brass stop cock of approved quality : (a) 15 mm nominal bore
Chipping of unsound/weak concrete material from slabs, beams,columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges,making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge (a) 25 mm average thickness
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. (a) Bars upto 12 mm diameter
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. (a) SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. (a) Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). (a) 25 mm average thickness in 2 layers
Providing and fixing anodised aluminium framed mosquito proof window shutters with aluminuim mosquito proof net fixed on aluminium section frame work with extruded built up standard tubular sections Z and mullion sections sections and glazing clips etc of approved make fixing to existing wooden frame work with dash fasteners of required dia and size, including necessary filling up the gaps at junctions . Outer frame work with aluminum Z section 34 x 28 x 1.80 mm and central vertical Mullion 56 x 35x 2 mm , window shutter frame with Z section 34 x 28 x 1.80 mm . Aluminium mosquito proof net of approved quality should be fixed with aluminium glazing clip. The rate includes hinges/ pivots , handle cum lock arrangement etc and fixing of fittings wherever required all complete as per architectural drawings and the directions of Engineer-in-charge.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position etc complete with available GI pipes and applying a priming coat of approved steel primer all complete. Pipe size up to 50mm
Removing the damaged and wornout water supply fittings like wall mixer,bib tap,stop cock, pillar tap etc., and staking with in site of work as directed by the Engineer - in - charge.
Dismantling of indian type water closet pan including necessary dismantling of cement concrete flooring and refilling the hole formed with good earth due to removal of water closet (approxmiate 0.40 Cum), disposal of the rubbish out side the premises etc. complete as directed by Engineer-in-Charge.
Providing and fixing C.P. brass exposed hot and cold water wall mixer Jaquar (Model No. CON-CHR-273KNUPR) or equivalent including exposing the pipe line fixing the wall mixer and making the wall good as directed by the Engineer in Charge
Providing and fixing PTMT health faucet with 1m long pvc hose of approved brand and manufacture and of approved shade - 15mm
Providing and fixing anodised aluminium framed mosquito proof window shutters with aluminuim mosquito proof net fixed on aluminium section frame work with extruded built up standard tubular sections Z and mullion sections sections and glazing clips etc of approved make fixing to existing wooden frame work with dash fasteners of required dia and size, including necessary filling up the gaps at junctions . Outer frame work with aluminum Z section 34 x 28 x 1.80 mm and central vertical Mullion 56 x 35x 2 mm , window shutter frame with Z section 34 x 28 x 1.80 mm . Aluminium mosquito proof net of approved quality should be fixed with aluminium glazing clip. The rate includes hinges/ pivots , handle cum lock arrangement etc and fixing of fittings wherever required all complete as per architectural drawings and the directions of Engineer-in-charge.
Providing and fixing 2 IN 1 PTMT bib cock of approved quality and colour. (a) 15 mm nominal bore.
Credit for taking away unserviceable recovered sanitary / water supply fittings.
Unserviciable Brass mixers
Unserviciable Brass Bib/stop cocks/pillar tap
Unserviciable GI pipes/fittings
stage.html
html • 0.01 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .