RENOVATION OF TOILETS FOR TPS OF ARO PROVN OF SEPTIC TANK SOAK WELL NEAR BLDG P-518 PARKING SHED WITH HARD STANDING OF ADM REGT VEH WAITING AREA WITH HARD STANDING FOR STN UNIT 3 X AC WITH ACCESSORIES AT KTA AND DG SET WITH ACCESSORIES FOR CLASS RO

Amount

Taking down chowkhats or frames with shutter, (without taking off shutters from the frame), exc 1.5 sqm but not exceeding 4 Sqm, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off premises complete all as specified and directed

S&F non skid coloured ceramic tiles 400x400 X 7 to 8 mm thick coloured or printed jointed in neat cement slurry and pointed in white or colour cement to match the shed of tiles including screed bed or bedding layer 15 mm thick in cement mortar 1.6 complete all as specified and directed

S &F Glazes ceramic coloured tiles of size 350X250X7 mm/450X350X7 mm X 7 to 8 mm thick glazed tile on vertical surface such as skirting and riser over and including rendering fair faces of brick work 10 mm thick in CM 1:4 complete all as specified and directed

M & L for Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15 mm screed bed in CM 1:6 complete all as specified and directed.

S & F in repair Europian WC wall mounted cascade pattern vitreous china with dual core flushing cistern incl all fitteng flush pipe etc of specified make complete all as specified and directed.

S&F in repairs CP anodised toilet Paper Holder recessed type , complete all as specified and as directed.

S & F in repair CP hand shawar (health faucet) with 1.0 mtr long easy flex tube for 15 mm bore all as specified and directed.

S&F in repair PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.

S&F in repair bib tap Chromoium plated , cast copper alloy 15 mm bore complete all as specified and directed.

S&F in repair WHB under counter of size 590X420X195 mm make jaguar cat CNS WHT 705 incl waste coupling 32/40 mm full length .make Jaquar Parryware Cera complete all as specified and directed.

S & F in repair Brass chromium plated hole bidet mixer (Basin mixer) with pop-up waste system with 300 mm long braided hoses complete all as specified and directed.Make Jaq , Cera & Parryware

S&F PVC waste pipe for urinal/WHB etc , complete all as specified and as directed.

S&F in repair Chromoium plated angular stop cock with wall flange, 15 mm bore complete all as specified and directed.

S&F in repair, 15 mm bore stop cock, cast copper alloy with long shank and cup (concealed type)/open type screwed down high pressure with crutch & butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in mirror Self in bathroom as per sample complete all as specified and directed

S&F in repair CP Soap dish in bathroom, complete all as specified and as directed.

S&F in repair 600 mm long CP anodised tubular towel rail, between flanges etc. , complete all as specified and as directed.

S&F CP anodised tubular hanger double coat hook etc. , complete all as specified and as directed.

S&F in repair grating doom 125 mm dia with waste hole complete all as specified and directed

S & F 75 mm dia PVC (SWR) floor trap, plain with grating incl jointing with solvent cement , complete all as specified and as directed.

S&F 40 mmdia PVC Pipe laid in floor complete all as specified and directed

Taking up or down steel tubing and & connections including and making good the disturbed surfaces 15 mm bore , complete all as specified and as directed.

Taking up or down steel tubing and & connections including and making good the disturbed surfaces 20 mm bore , complete all as specified and as directed.

S&F 16 mm outer dia 3-layer PP-R polypropylene random copolymer) concealed pipe SDRT-4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply incl; all PP-R palin & brass threaded polypropylene random fitting fixed complete to walls ,ceilings or in floors complete all as specified and directed.

S&F 20 mm outer dia 3-layer PP-R polypropylene random copolymer) concealed pipe SDRT-4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply incl; all PP-R palin & brass threaded polypropylene random fitting fixed complete to walls ,ceilings or in floors complete all as specified and directed.

M & L for cutting holes in stone walls builts in cement mortar for inserting pipe and making good dismanted portion in cement mortar1:3 or cement concrete 1:2:4 type B-1 as required , complete all as specified and as directed.

S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position including dismantling of old u/s water tank and removing to store complete all as specified and directed

S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

Taking down cement or cement lime plaster, of any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finishing even and smooth using extra cement incl Integral Waterproofing Compound (0.2 % or 100 ml per bag of cement) complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall or concrete surfaces over & including a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15 cm thick below or above the ground floor etc complete all as specified and directed

M&L for hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface etc all as specified & directed.

M&L 100 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub floors somplete all as specified.

M&L providing glossy chequered tiles 20 cm X 20 cm X 22 to 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and no pigment laid over and including screed bed or bedding layer 20 mm thick in CM 1:4 as in floors complete all as specified and directed

M&L preparation of old painted surfaces of walls and applying one coat of cement based , complete all as specified and as directed.

S & F in repair Urinal Pot of size 355X345X535 mm , complete all as specified and as directed.

S & F in repair vitreous chins Urinal Patition of size 310X700 mm terminating about 40 cm above floor fixed in position complete all as specified and directed .

S & F Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed , complete all as specified and as directed.

M&L brick work with sub class "B'' brick straight or curved on plan exe 6m mean radius built in cement morter 1:6 complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded broken stone aggregate) as in floor/plinth protecton , finish even & smooth without using extra cement all as specified and directed.

M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) in roof padding/ kerbs/ sunken slab etc complete all as specified and directed.

M&L in repairs vitreous china squatting pan , ‘Orissa’ Pattern, size 580 X 440 mm white, with integral foot rests etc. complete all as specified and directed.

S&F in repairs, PVC valveless syphonic action type low level flushing cistern, 10 ltrs capacity with inlet, ball valve, float and handle including bracket complete all as specified and directed

M&L 10 mm thick rendering on roof surfaces/ concrete surface in CM 1:4 with liquid water proofing compound @ 200 ml per 50 Kg cement complete all as specified and directed. (Waterproofing compound should be measured and paid separately).

M&L Water proofing treatment on "Non approachable / non accessible and approachable roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete (i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm (ii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces complete all as specified and directed. (iii) Laying evenly over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction complete all as specified and directed. (iv) Applying two coats of bituminous aluminium paint including preparation complete all as specified and directed.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade(MMS) and including cutting, chasing work at any height and all accessories concealed in walls / roofs / floors / ceiling etc. flush mounting MS box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of and including white/Silver/Dark bronze colour modular blanking plate as per number of switch modules flush mounted for fixing of modular switches,sockets,fan regulators, blank plate etc and including above mentioned colour modular plate cover of required modules and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good and smooth finishing complete all as specified and directed for One light point controlled by one switch.

All as p[er item no. 51 but for One exhaust fan point controlled by one switch .

All as p[er item no. 51 but for One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

All as p[er item no. 51 but for One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

All as p[er item no. 51 but for point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.

All as p[er item no. 55 but for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on same board.

Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type switch 16 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.

Supply & fixing modular type socket 6 A/16 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed

Supply & fix angle lamp holder, insulated body with back plate for batten fittings complete all as specified and directed.

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose , complete all as specified and directed

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size , complete all as specified and directed

Supply and fix new exhaust fan, steel /PVC body AC single phase.230Volts of size 300 mm sweep with blades and frame with louvers complete all as specified and directed.

Supply & fix and sheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB,8 way, flush mounting with 200 amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.

Supply & fix MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and complete all as specified and directed.

Supply & fix and MCB SPN 32-40 Amps 10 KA,"C" series,AC,440Volts,50Hz, ISI marked and complete all as specified and directed.

Supply laying and testing XLPE Insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 6 sqmm 2 core all as specified and directed.

Excavation in trenches , not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft /loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.

Supply and laying (inner antimicrobial), outer UV stabilized, ISI Marked IS-15801,PP-R Pipes,SDR 7.4(PN-16) and PPR plain fittings in trenches/walls/ceilings or laying in floors complete of size outer dia 25 mm including all fittings ,complete all as specified and directed.

Supply and fixing PPR gate valve(Brass insert) of dia 25 mm ,complete all as specified and directed.

Making connections of PPR pipes distribution branches with PPR main of following sizes of 16 to 40mm by providing and fixing tee including cutting and making fusion joint etc ,complete all as specified and directed.

M&L for Excavating in trenches in soft/ loose soil, exceeding 1.5m wide and not exceeding 3.00 m in depth for foundation, n exc 10 sqm in plan and getting out complete all as specified and directed.

M&L for Cement concrete Type D-2, 1:4:8 (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) Flat, with fair finished surfaces complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as speified and directed.

M&L for Brick work with fly ash bricks straight or curved on plan exceeding 6 m mean radius complete built in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M & L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in in cement mortar 1:4 complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of floor complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.50 mm graded aggregate as in sub-base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L Rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finish the surfaces even and smooth without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

Supply only water proofing compound (liquid), ISI marked complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 110 mm bore complete all as specified and directed.

M&L for 200mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L Salt glazed stone ware gully traps size 150 x 150mm, square or round mouthed, type ‘P’ including setting and jointing to drains with CM 1:1 including demolition of existing traps complete all as specified and directed. (Note: CI grating will be meaured separately).

M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for pre cast cement concrete 1:1.5:3, type A-1, using 20mm graded stone aggregate as in cover slabs (for manholes etc) and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out returning, filling, in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm as in any typeof soil incl watering, and removal surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M&L for PCC 1:2:4 type B2 using 40mm graded stone aggregate in foundation and filling mass concrete complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240) complete all as specified and as directed.

M&L for Fe 410-W (Gde E-250 quality A) Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L Preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces, wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc complete all as specified and directed.

M&L for Hard core of broken stone or boulders of guage n exc. 63 mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface. Complete all as specified & as directed. .

M&L 75mm thick cement concrete type B2, PCC 1:3:6 (40mm graded agg) as in path/hardstanding as directed by Engr -in -charge

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed. .

M&L PCC 1:2:4 Type B0 with dosage of metallic hardener is used 5 kg per 50 kg cement bag matalic hardnar (12mm graded agg) as in copings,kerbs and like incl weathering slightly rounded or chamfered angles and throating as directed finish even & smooth without using extra cement.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in pillars, post holes and mass concrete complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted , bolted or welded attachment. (Fe 410 -W (Gde- E-250) quality -A complete i all as specified and as directed.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, n exc 5cm long diameter of neck 5 to 10mm complete all as specified and as directed.

Supply & fix and sheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 4/6 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed by Engineer-in-Charge

S& F for wind ties for roof including securing bolts posts and struts infencing including cutting top to shape as directed, drilling holes, notching for wire ,ect including all necessary drilling, bolting or riveng for wire, etc including work conforming to Fe-290 Gde E-165

S&F PVC/ rain water (SWR) pipes 200 mm bore single socketed in any length with rubber ring joints bends, any radius fixed to steel work in tubular trusses/purleen including tack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays and also including bolts & nuts and securing ends of stays complete all as specified and directed.

Demolition of Cement Concrete in ground floors and pavings n exc 15cm thick below or above ground level complete all as specified and directed

Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern and glossy finish as in footpath, parks, lawns, drive ways or light traffic parking etcof required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibatory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as specified and directed.

M&L preparing of new concrete floors and applying two coats of acrylic exterior weather proof emulsion paint (colour in black or any tints) over a coat of exterior primer on newly concret surfaces, includes complete removal dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and etc complete all as specified and directed.

Supply and fixing, install, new Cassette type units indoor/outdoor of capacity 3.7 to 4.0 TR, complete with cordless remote control unit,twin rotary compressor,single phase uits,220-240Volts with suitable batteries and remote holder and complete and including providing suitable fixing arrangements for indoor and outdoor units & standard accessories i.e necessary copper tube as per site requirement, Heavy duty MS stands & angle iron clamps for out door unit,indoor unit plug top,holefastners,necessary suitable four core 6 sqmm ,PVC sheathed copper conductor for inter connections indoor and out door units, drain pipe from indoor unit to outside bldg as per site requirement with minimum star rating complete all as specified and directed.Make:-Daikin/Carrier/Hitachi/O-Genaral/LG or any approved make.

Taking down old unserviceable air conditions complete indoor and outdoor units and incl disconnecting the electrical connections from switch board, MS stand etc from existing bldgs/location without any damages and further deposited in MES store yard for safe custody and Supply and fixing, install, new wall split indoor & outdoor unit of capacity 2TR with copper condenser complete,dual/swing inverter type compressor, complete with cordless remote control unit with suitable batteries and remote holder and complete indoor and outdoor units and standard accessories i.e necessary copper tube as per site requirement, Heavy duty MS stand for out door unit,indoor unit plug top,holefastners,necessary suitable three core PVC sheathed copper conductor for inter connections indoor and out door units, heavy suty drain pipe from indoor unit to outside bldg with minimum star rating complete all as specified and directed.Make:-Daikin/Carrier/Hitachi/O-Genaral/LG or any approved make.

Supply and fix Voltage stabilizer for automatic operation,single phase,digital display type, naturally air cooled indoor type & designed for input variation between 300 volts to 480 volts with out voltage stabilized at 20 volts with accuracy of± 2.5% and of capacity 5-10 KVA complete all as specified and directed.Make :- Sen & Pandit / V-guard/Vinitec Electronic or any approved make.

M & L for sub main wiring complete with 4 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit concealed ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Four run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Supply and fix suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SPN 20 to 63 Amps(as per site reqt), 10KA 'C 'series, 230 Volts,50Hz suitable for AC's/Geysers complete all as specified and directed.

Supply & fix and sheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.

Supply & fix and MCB SPN 40 to 63 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked complete all as specified and directed.

M&L for in repairs perforated particle board/tiles for insulation and acoustic purposes,60x60 cm in size12 mm fixed with nails to timber frame work or with staples on snap grid complete all as specified and directed.

S&F anodised aluminium snap grid frame size of grid 605 x605 mm work for false ceiling and including removing old unsv false ceilig and grid complete all as specified and directed

M&L for galvanised iron angles/channels/Flat Irons for cassette air coditioner units fixing arrangements and including providing necessary fabrication welding work, & drilling work,bending,cutting,nuts,bolts and washers etc with proper achoring/fixing at roof and two coats of red oxide primer and two coats of anti-corrosive paint complete all as specified and directed.

Supplying and laying of CPVC /UPVC pipes SDR 11 & Plain SDR 11 incl all fittings ( bens, Tee, long bend, coupling,short pieces etc) of outer dia 32 -40 mm laying in floors/in walls /in trenches etc with clamping complete all as specified

Supply and fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;4 sqmm and including electric connection through PVC conduit in concealed/casing caping in surface from ceiling fan to ceiling rose and including removing old unserviceable item complete all as specified and directed.

S&F for PVC non-metalic rigid conduit 25-32 mm dia incl looping boxes,junctions boxes 1 to 4 way & terminals and incl providing all types accessories such as tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers lock nuts,saddles,pipes hookes etc ISI marked for AC,s connections cables including tiles cutting,chasses and making good disturbed surfaces to match with existing colour tiles surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed.

Supply, installation, testing & commissioning silent generating set with accoustic enclosure of capacity 30 KVA Diesel Engine driven 3 phase 415 Volts, 4 wire, 50 hz, 0.8 PF, 1500 RPM engine as per IS : 10001/10002 and alternator as per IS 13364 complete with relay panel and switch gears control panel having meter and sound proof canopy as per CPCB IV+Norms and suitable foundation etc. complete all as specified and comprising of the following :- (a) Prime Mover : Suitable for driving 30 KVA alternator, battery (electric start) diesel engine of suitable capacity BHP confirming latest IS and a fuel tank suitable for 12 hours consumption capacity mounted on MS frame pedestal support, rated for continues running, capable of taking 10% over load for one hour in any 12 hrs operation taking into consideration de-rating due to altitude/temp & complete with folliwing standard accesories. (i) Fly wheel and fly wheel housing to match with the flexible coupling. (ii) Flexible coupling with guard. (iii) Air cleaner dry type (iv) Lubricating oil filter, flow paper element type (v) Blower type fan (vi) Fuel pump (vii) Governor class 'A' governing as per latest IS. (viii) Turbo charger (ix) Fuel Tank (x) Battery/ies and leads (xi) Residential silencer (xii) Std Control Panel (xiii) First fill of Lube Oil & Cooland (xiv) AVM pads (xv) Acc Supply installation testing and commissioning DG set 30 KVA with standard panels, cables fdn etc confirming to CPCB IV Norms

M&L Earthing complete with galvanised steel earth plat electrode 600x600x6mm buried directly in ground not less than 2.25 mtr deep below normal ground level with top edge of earth plate not less than 1.5mtr below normal ground level connected to the Galvanised iron strip 32x6mm size by means of bolts, nuts, check ntus and washers of galvanised iron and 32x6mm GI strip procted by provision of GI light grade pipe 40 mm bore incl provision of concrete pit in PCC1:2:4 type B-1, using 20 mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, excavation and earth work in any type of soil, charcoal dust and salt light grade GI protection pipe 40 mm bore 5 Mtr long and GI strip upto main earthing of pole complete all as shown in electrical plate No 3 of MES Sch 2009 Part-I all as specified and directed. Notes:- (i) Main earthing strip from earth plate electrode to test point upto length of 7.5 metres length shall deem to be included in the unit rate quoted against this item. (ii) GI protection pipe & earthing lead beyond 7.5 metres shall be measured and paid for seperately under appropriate item of Sch A part-I. (iii) On testing after completion if desired resistance is not obtained, the contractor shall redo the earthing without any extra cost to the department

S&F in repair/replacement of on load change over switches 4 pole 100A in open execution, 415 volts, 50 Hz complete all as specified and directed.

Supply, laying, jointing and testing of XLPE insulated, armoured, heavy duty LT under ground cable 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area for 50 Sqm & 3.5 Core all as specified and directed.

chauhan syndicate (BID ID -3484144)

P JAGANNADHARAJU (BID ID -3483640)

JPR CONSTRUCTIONS AND ENGINEERS (BID ID -3483637)

TECHNO SOFT SOLUTIONS (BID ID -3483779)