SPECIAL REPAIR TO BLDG NO T-382, T-335 AND TC-45 (OTM ACCN) OF 59 ARMD REGT AT HISAR MIL STN UNDER GE (WEST) HISAR

Amount

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15 cm thick (below or above ground level) & removing rubbish out side MD land complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removal complete all as specified and as directed.

M&L for 50mm thick PCC (1:3:6) type C-1 (Using 20mm graded crushed stone aggregate) as in plinth protection finished even and fair without using extra cement complete all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floor, 40mm thick, finished even and smooth using extra cement complete all as specified and as directed.

S&F glass dividing strips, 3mm thick 38mm wide, inserted in position, confirm to design complete all as specified and directed.

M&L for 25mm thick cement concrete flooring type B-0 (1:2:4) using 12.5mm graged stone aggregate screed / sub base complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and directed.

S&F coloured Non Skid ceramic tiles 7 to 8 mm thick, (Square / rectangular) polished area of each tile exceeding 0.06sqm but not exceeding 0.11sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match complete all as specified and directed.

S&F coloured Non Skid ceramic tiles 7 to 8 mm thick, (Square / rectangular) polished area of each tile exceeding 0.11sqm but not exceeding 0.18sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match complete all as specified and directed.

S&F coloured Non Skid ceramic tiles 7 to 8 mm thick, (Square / rectangular) polished area of each tile exceeding 0.18sqm but not exceeding 0.38sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match complete all as specified and directed.

M&L for chequered cement concrete tiles 25cm x 25cm x 25mm thick machine pressed set jointed with grey cement and pointed in neat cement slurry in floors complete all as specified and directed.

M&L for vitrified ceramic tiles (light shade) 10mm thick (square or rectangular) area of each tiles exc 0.36 sqm but n.exc 0.42 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick or concrete surface for laying tiles complete all as specified and directed.

M&L glazed ceramic coloured tiles 300 x 200 x 6mm to 7mm thick as on vertical surfaces such as skirting / dado risers to steps etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match coloured tiles all as specified and directed.

M&L for coloured glazed ceramic tiles of size 350 x 450 x 7mm / 250 x 350 x 7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match complete all as specified and directed.

M&L for vitrified ceramic tiles (light shade) 10mm thick (square or rectangular) in vertical surface such as skirting, dado etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade complete all as specified and directed.

M&L 20-25mm thick machine cut Kota stone slabs of size 550mm x 550mm (minimum) over laid and jointed with grey cement slurry mixed with pigment to match the shade of stone incl rubbing & mirror polishing complete all as specified and directed.

M&L Kota stone slab 20 to 25mm thick in riser of steps, skirting, dado and pillar laid over and incl 10mm thick plaster in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Demolition of brick work or stone / boulder measonary, built in cement mortar including all quoins, arches, pillars etc, but exceeding ashlar facings, dressed stone work complete all as specified & directed.

M&L brick work with Fly Ash bricks straight or curved on plan exc 6mtr mean radius, built in CM (1:6) complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and as directed.

Taking down cement plaster or cement lime plaster on brick or concrete or stone walls surface including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) with water proofing compound on fair face of brick walls / concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed. (WPC shall be supplied and paid separately)

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and fair complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces and applying two coats of colour wash over and including a coat of white wash complete all as specified and directed.

M&L Preparation of new plastered or unplastered surfaces of wall and applying two coats of white or tinted cement based paint over a coat of alkali resistant primer complete all as specified and directed.

M&L Preparing new plastered or unplastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer on walls complete all as specified and directed.

M&L for pre cast PCC (1:3:6) Type C-1 (using 20mm graded stone agregate) as in roof kerbs, gola or mud stops, rounded or chamfered on edges complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm & n.exc 4.00 sqm each including cutting holes for removal of hold fast complete all as specified and directed.

Taking down shutters of any description exc 1 sqm & n.exc 2 sqm each leaf complete all as specified and directed.

S&F rolled mild steel section confirming to Fe-290 (Gde E-165) as in door frame / chowkats, ladders, framed baluster, railing, cooler stand, frame work of water tank etc including cutting to required length, welding etc including hold fast complete all as specified and directed.

S&F factory made 35mm thick plain framed panelled door shutter (any number of panels) of 2nd class hard wood with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and style shall be as per IS –1003 (Part-I) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed.

S&F 35mm thick factory made glazed and skeleton shutters of 2nd class HW open rebated and prepared to receive glass / gauze etc edges or framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR pt-1 section 8.24 (a) complete all as specified and directed.

S&F 30mm thick solid core flush shutter for cup board shutter with block board core & plywood face panels on both sides complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tubes complete all as specified and directed.

S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with moulded plain colour PVC ‘C’ channel having PVC sheet strip 20mm wide struck inside with solvent cement for stiles and PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top and bottom rail Paneling of plain colour PVC sheet to be fixed in MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specification and drawing of SSR Part-II (2010) complete all as specified and directed.

S&F factory made steel window, ISI Marked, (Box type) with side hung shutter including box type hinges with steel handle and tower bolt and steel peg stay with glazing bar, dovetailed or welded with one shop coat of zinc chrome primer including making good disturbed surfaces of walls complete all as specified and directed. Note : HQ CEJZ Drawing No TD/2013/01 Sheet 1/3,2/3,3/3.

S&F factory made steel window, ISI Marked, (Box type) with side hung shutter including box type hinges with steel handle and tower bolt and steel peg stay without glazing bar, dovetailed or welded with one shop coat of zinc chrome primer including making good disturbed surfaces of walls complete all as specified and directed. Note : HQ CEJZ Drawing No TD/2013/01 Sheet 1/3,2/3,3/3.

Supply only butt hinges 100mm medium weight cold rolled mild steel complete all as specified and directed.

S&F butt hinges 100mm medium weight cold rolled stainless steel, ISI marked, fixed to PVC chowkhats with screws complete all as specified and directed.

S&F 300mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 150mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F aluminium handle cast type, anodised 150mm long complete all as specified and directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality in square not exc 0.5 sqm in each pane fixed with oil putty or wooden beads and leaving the panes clean complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pin / spring / clip complete all as specified and directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered and riveted, or forged intospikes framed guard bars and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described exc 10 cm width or girth and applying two coats of synthetic enamels paints over a coat of pink primer complete all as specified & directed.

M&L for preparation of new steel surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.

Taking up or down steel water tubing and connection of 15mm bore complete all as specified and directed.

Taking up or down steel water tubing and connection of 20mm bore complete all as specified and directed.

M&L steel water tubing 15mm bore medium grade galvanized ISI marked with all fitting and fixed to wall ceiling in floors complete all as specifed and directed.

Cleaning and refixing old steel tubing 15mm bore with and provision of new fittings (connections) in new or old position (walls, ceiling, floors etc) complete all as specifed and directed.

M&L steel water tubing 20mm bore medium grade galvanized ISI marked with all fitting and fixed to wall ceiling in floors complete all as specifed and directed.

Cleaning and refixing old steel tubing 20mm bore with and provision of new fittings (connections) in new or old position (walls, ceiling, floors etc) complete all as specifed and directed.

Dismantling water tanks of any type description of capacity exc 250 liters but n.exc 500 liters complete all as specified and directed.

M&L PVC water tank ISI marked rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted & fixed in position of capacity 500 ltr complete all as specified and directed.

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bore chromium plated cast copper alloy bib taps with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair fancy type chromium plated stop valves / angle cocks, cast copper alloy with crutch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brass ferrule complete all as specified and directed.

Supply and fixing in repair stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed to pipe of 20mm bore complete all as specified and directed.

S&F in repair fancy type chromium plated with long shank and cup (concealed type) stop valves, cast copper aloy with crutch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F grating round 140mm dia without waste hole of PTMT (Minimum weight 50 gms) complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and directed.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mm x 440mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap and to flushing pipe, anti-syphonage pipe etc including making good to floor, complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with 'P' or 'S' trap complete all as specified and directed.

S&F in repairs PVC flushing cistern, 10 ltrs syphonic action type, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore and connection to WC pan complete all as specified and directed.

S&F in repair Vitreous china wash basin white flat back size 550 x 400mm size, incl cutting for and pinning in ends of brackets or erecting stand but inclusive of fixing of supply and waste & waste pipe 32mm bore complete all as specified and directed.

S&F 15mm bore Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L precast cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in manholes cover slab and shelves etc and set in cement mortar (1:4) complete all as specified and directed.

S&F mild steel TMT bars as in reinforcement 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel (wire) annealed not less than0.9mm dia complete all as specified and directed.

S&F mild steel TMT bars as in reinforcement 6 to 8mm dia cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel (wire) annealed not less than0.9mm dia complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section (framed work) in any position complete all as specified and directed.

Dismantling timber in fillets, rails, posts, rafters, purlins, etc under 40 sqcm in section, in unframed work in any position complete all as specified and directed.

S&F 605 x 605mm size of grid GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm suspended form soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section ( not exc 1.2m length ) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

M&L for hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F gypsum board, 12mm thick for insulation and acoustic purpose 60 x 60cm size, fixed to frame work and snap grid complete all as specified and directed. (Frame work for ceiling shall be measured and paid seperately)

M&L in repair 4mm thick asbestos cement plain building boards, fixed to iron framework ceiling complete all as specified and directed.

Dismantling asbestos cement corrugated or semi corrugated sheets as in roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strenght of 550 Mpa as in roof covering / cladding / wall / ridge fixed with self tapping screws complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar internal dia of pipe 150mm complete all as specified and directed.

Excavation in trenches in soft / loose soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc, or not exc 10 sqm on plan and n exc 1.5m in depth for shaft, cesspit, manholes etc and getting out complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm dia pipe complete all as specified and directed.

M&L for 150mm bore Reinforced concrete pipes class NP2 laid and jointed complete with collars in trenches complete all as specified and directed.

M&L for PCC type D-2 (1:4:8) (using 40mm graded stone aggregare) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping and the like including weathering slightly rounded or chamfered angles including necessary form work complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 150mm bore pipe complete all as specified and directed.

M&L for returning filling in approved excavated soil including spreading levelling and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50m & depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Taking down carefully surface aluminium point wiring with wooden battens / PVC conduit (light, fan, socket, bell or power) including fittings such as switches, ceiling roses, lamp holders, pendants, sockets, regulators etc and making good disturbed surfaces complete all as specified and directed.

M&L for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black, Earth - Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings / fixing accessories including cast iron/ Pressed steel terminal boxes 60mm deep for mounting switches, sockets, fan regulators etc with 3mm thick bakelite sheet top cover including cutting, chasing on wall and other surfaces and making good disturbed surface complete for the following :-

One light / fan / bell point controlled by one switch.

One socket outlet 6 amp controlled by one switch on indepdendent board.

One socket outlet 6 amp controlled by one switch on the same board.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black, Earth - Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories, with earth continuty conductor with FRLS PVC insulated multistranded copper conductor cable 2.5 Sqmm complete for one 16 amp socket outlet controlled by one switch on independent board , including cutting, chasing on wall and other surfaces and making the good disturbed surface complete.

S&F socket outlet multipurpose type shutterd and interlocking flush type 230/250 volts grade for:-

3 Pin 15 Amp (with 3 pin outlet also)

3 Pin 5 Amp (with 2 pin outlet also)

S&F switch piano type 230/250 volts grade on top covers for :-

Single pole one way 5/6 Amp rating

Single pole one way 15/16 Amp rating

S&F lamp holder insulated body with back plate suitable for batten fitting and connecting up complete all as specified and directed

S&F LED bulb of capacity 9/10W complete all as specified and directed.

S&F LED light fitting 1x10W bulk head luminaires with LED lamp and holder etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 V, 50 Hz complete all as specified and directed. Make - Bajaj or equivalent of make as apecified in Appx 'B'

S&F ceiling rose of 65x50mm PVC / polycarbonate three terminal surface bakelite complete all as specified and directed.

S&F LED 18/20 W CRCA box type only for Retro LED tube rod complete all as specified and directed. Make - Crompton Cat Part No IGP131LT8-16 or equivalent of make as apecified in Appx 'B'

S&F LED light rod 18/20W only complete all as specified and directed. Make - Crompton Cat Part No LT5RT1-18-CDL or equivalent of make as apecified in Appx 'B'

S&F electronic ceiling fan regulator stepped type heavy duty suitable to work on 230 volts complete all as specified and directed.

Disconnecting & taking down ceiling fan carefully during re-wiring work & after complete re-wiring connecting, hanging ceiling fan with connecting wire including servicing (oil and greasing), renewal of rubber insulator, split pin, spray paint of same colour of ceiling fan complete including and providing down rod 1.30m long complete all as specified and directed.

M&L for MCB SP 240 volts, 6-32 Amps, 10KA, C-Series complete all as specified and directed.

M&L for MCB SPN 240 volts, 32 Amps, 10KA, 'C'-Series complete all as specified and directed.

S&F factory made sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with isolated neutral bar and shrounded bus bar IP protection 43 having door earthing complete all as specified and directed.

S&F 1100 volts grade heavy duty cable PVC insulated of size 10 Sqmm stranded aluminium conductor one twin core cable flat or circular served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart incl 4mm dia GI suspension wire complete all as specified and directed.

M&L house service bracket (hook type) complete with 3.0m long G.I pipe 40mm dia medium grade, two nos 90 degree bends, M.S hook and stay or guy complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt, connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel protected by galvanised iron light grade 15 mm dia pipe and 20mm light grade for water filling including 15mm x 20mm reducer socket funnel wire mesh, RCC cover with concrete 1:2:4 type B1 using 8mm dia MS TMT bars @100 mm c/c both ways, PCC chamber pit with PCC (1:3:6) type C-2 and excavation and earth work, disposal of suplus spoil to a dstance not exceeding 50mtrs all as specified and shown on electrical plate No. 3 of 2009 (Part-I) including taking out old existing earthing complete all as specified and directed. Note : The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level.

M/s Devendera construction

Balaji Construction Co.

SITA RAM AND SONS

P.K. ENTERPRISES