Business Plan 2023 24

Amount

Safe loading & carriage including unloading & proper stacking of following store materials from ESC Lucknow/JE store to site of work & Vice Versa

11 KV 3x300 sq mm XLPE Cable

11 KV 3x300 sq.mm Cable Jointing Kit I/D

11 KV 3x300 sq.mm Cable Jointing Kit O/D

11 KV 3x185 sq mm XLPE Cable

11 KV 3x185 sq mm XLPE O/D J/Kit

11 KV 3x185 sq mm XLPE I/D J/Kit

11 KV 3x70 sq mm XLPE cable

11 KV 3x70 sq mm Cable Jointing Kit Indoor.

11 KV 3x70 sq mm Cable Jointing Kit Outdoor.

ST Pole 11 Mtr Long (Galvanised Bottom)

11 KV Pin Insulator

11 KV Pin with Nut

MS earthing rod 20x2500 mm

MS angle 65x65x6MM 5.8 kg / Mtr.

M.S. Channel 100x50 sq mm 10 kg / Mtr.

LT PVC Cable 1x240 sq mm

Laying of 11KV XLPE Cable Single circuit in normal soil by digging of trench 1050 mm deep, 500mm wide including supply of required material, 1st class bricks, stone pad & fine sand and back filling of digged trench and proper leveling after laying of cable. (All the material required for laying will be supplied by the contractor & 33 KV XLPE cable will be supplied by the department)

Laying of 11 KV XLPE Cable Double circuit in normal soil by digging of trench 1050 mm deep, 750mm wide including supply of required material, 1st class bricks, stone pad & fine sand. The inter axial spacing between two cable should be in between 0.25 M to 0.40 M. The two cable must be separated by a partition of brick and cover with stone pad and back filling of digged trench and proper leveling after laying of cable. (All the material required for laying will be supplied by the contractor & 33 KV XLPE cable will be supplied by the department)

Hoisting of 11 KV XLPE cable on double pole exposure with GI pipe of size 4" dia 3 M long including its jumpering complete with clamps, nuts and bolts. (All the material will be supplied by the contractor & 33 KV XLPE cable will be supplied by the department)

Cable laying in existing trench S/C all size cable.

Hoisting of 11 KV cable on 11 switchgear & Cable Stand.

Earthing by way of boring and lowering of B class GI pipe 50 mm dia from ground upto the water level (minimum 30 meter deep) as per standard.

Fabrication & erection of 11 KV cable exposure type double pole with the provision of separate bus bar for each cable with fixing of necessary clamps and other acessories like danger board,number plate,barbed wire, 9 no. pin insulators with pins,2 no. channels 100x50 mm (1600mm each),1 no.MS channel 100x50 mm(3200mm in length) and 2 no.MS angle 65x65x6 mm (each 3200mm in length ) for supporting the hoisting of cable etc.Its jumpering by single core PVC aluminium cable with proper size of lug as per RESSPO norms.(All material to be arranged by contractor except STP, MS Channel, MS Angle, 11 KV Pin Insulator, 11 KV Pin with nut & PVC cable shall be provided by the Dept.).

Grouting of pole in depth of 1/6 the length of pole in ratio 1:4:8 in cement sand and brick balast and construction of pole plinth 300mm x 45mm above ground level in 1:2:4 in cement, coarse sand and stone grittas per RESPO norms. (All material shall be provided by contractor)

Construction of pole plinth 300mm x 45mm above ground level in 1:2:4 in cement, coarse sand and stone gritt as per RESPO norms.

Painting of ST pole with one coat of red oxide & two coats of best quality paint. Top 2 mtr should be PO Red paint and remaining aluminium Paint ISI mark as per RESPO norms. (All material shall be provided by contractor)

Construction of cable trench of size 300x300 mm with welded frame type control cable trench cover suitable for trench including cost of MS/Torr Bar.

Providing and Laying of following size copper, control cable through underground /cable trench/trenching SGR interlinking through proper connections to transformer control panel/protection board /Battery and Battery Charger/ Relays 33/11 KV Transformer junction box/ 33KV VCB ,CTs etc as per site conditions.

Providing and Installation of 24 Volt, 15 AH sine wave Battery and battery Charger Complete and including its commisioning. (All materials provided by contractor)

High Pressure testing of XLPE cable. Testing equipment will be arranged by the contractor.

Construction of cable trench of size 800mmx850mmx150 mm with RCC cable trench cover suitable for trench including cost of MS/Torr Bar.

Dismantling, Shifting & Re-installation of 33 KV Double T.F Control panel.

Dismanteling, shifting & re installation of 11 KV I/C, O/G,Bus coupler, Capacitor Bank and Adapter Panel including Bus bar

Laying and spreading of 3.5 x70 Sq.mm PVC LT cable from 63 KVA T/F to LT Distribution Board in switchgear room after digging the trench, laying cable and refilling of trench including connection at both ends after providing and crimpling of lugs of proper size,complete work. (3x70 Sq. mm PVC LT Cable and all materials Providing by contractor)

Earthing of each indoor Panel equipments by means of M.S strip 50x6mm & connecting to Pipe boaring type earthing as per RESSPO norms. Joints will be welded with high quality arc welding. (33 KV panel & 11 KV panels each earthing should be seperate)

Saraswati Electricals & Contractors

HARE KRISHNA ENERGY PROJECTS