Providing and Fixing of Open Air Gym in Neighbourhood Parks in Sector 20 and 30 Chandigarh under Ward Development Fund

Providing and Fixing of Push Chair (Double) Functions: Developing the strength of upper limbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows. Good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc. The main central pipe is made of 100 NB pipe. The hand and sitting pipe are 40 NB. The seats are made of metallic sheet 3 mm M.S. of size 1’X1’. Both side vertical stand pipe 40 NB. Edges of the seats are moulded suitable to avoid injury to the users. Seats’ moving pipe is 40NB pipe. Grip hand is 25 NB pipe. Size: 1651x813x2134 mm Installation of outdoor in cement concrete block of size 5”x 5” x 1 ¼” to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing of Taiji Wheel. TAIJI WHEEL complete in all respects having following specifications. a) All pipes should used in the equipments should be galvanised with 3mm thickness. b) Multi Colour Powder coating with polyster paints should be used on all the equipments. c) The foot pedal on all the equipments should be of aluminium only. d) The seats should be made of high quality plastic with colour scheme in yellow or orange. e) The high end bearings such as SKF/NBC must be used in all the equipments. 1 Dimensions- 1300*1050*1450mm 2 Colour- customizable multi colour and complete powder coat 3 Size of main tube-114*3.75mm steel tube 4 Size of supporting tube-30*3mm steel tube 5 Radius of edge is no less than 3.0 mm. 6 Al alloy protecting covers are used at the top other main tubes to protect from the rainwater 7 There are damping materials inside the rotating parts. 8 The distance between two spinners is no less than 230mm, avoiding the damage of being stuck 9 Anti theft cover is made by hard plastic Functions: Develops the strength of upper limbs, shoulder and chest, strengthening cardiac and pneumonic functions. Approaches: Hold the crossbars tight with your hands and lift yourself up, then using the strength of your arms to do the pull-up action. Repeat according to your physical conditions. Users: Suitable for middle-aged people and youths. Installation of outdoor in cement concrete block of size 5”x 5” x 1 ¼”to the entire satisfaction of the Engineer-in-Charge.

Providing and Fixing of Parallel Bars . PARALLEL BARS complete in all respects having following specifications. a) All pipes should used in the equipments should be galvanised with 3mm thickness. b) Multi Colour Powder coating with polyster paints should be used on all the equipments. c) The foot pedal on all the equipments should be of aluminium only. d) The seats should be made of high quality plastic with colour scheme in yellow or orange. e) The high end bearings such as SKF/NBC must be used in all the equipments. Functions: Develops the strength of upper limbs, shoulder and chest, strengthening cardiac and pneumonic functions. Approaches: Hold the crossbars tight with your hands and lift yourself up, then using the strength of your arms to do the pull-up action. Repeat according to your physical conditions. Users: Suitable for middle-aged people and youths. Size:- 1970x542x1600 mm Material: Pre Galvanized Mild Steel, Material Thickness: 3 mm. Paint: All Weather Double Layer Powder Coated complete in all respects to the entire satisfaction of the Engineer-in-Charge Installation of outdoor in cement concrete block of size 5”x 5” x 1 ¼” to the entire satisfaction of the Engineer-in-Charge.

Providing and Fixing of Sur Board (Double) Functions: By swinging both legs together from side to side the Surfing Board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through “core” activation. Main central pipe is made up of 100 NB. The surf board pedal/footrest are fixed to supporting pipe of 50 NB size which further fixed to main central Pipe. Top supporting handle are made up of 40 NB Pipe. The surf board foot rest is made up of M.S. checked plate 4 mm thickness. Size:- 914x864x1219 mm Installation of outdoor in cement concrete block of size 5”x 5” x 1 ¼” to the entire satisfaction of the Engineer-in-Charge.

Providing and Fixing of Seated Pedal Trainer – LEG SHAPER complete in all respects having following specifications. a) All pipes should used in the equipments should be galvanised with 3mm thickness. b) Multi Colour Powder coating with polyster paints should be used on all the equipments. c) The foot pedal on all the equipments should be of aluminium only. d) The seats should be made of high quality plastic with colour scheme in yellow or orange. e) The high end bearings such as SKF/NBC must be used in all the equipments. 1 Dimensions- 1730*450*1450mm 2 Colour- customizable multi colour and complete powder coat 3 Size of main tube-114*3.75mm steel pipe 4 Size of supporting tube-76*3mm steel pipe 5 There is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck. 6 Al alloy protecting covers are used at the top other main tubes to protect from the rainwater 7 Anti-skid components are used at the pedal parts. 8 The distance between two spinners is no less than 230mm, avoiding the damage of being stuck 9 Anti theft cover is made by stainless steel/high quality plastic. 10 Thickness of bearing bracket is no less than8mm 11 Hazardous materials like coating agent, rubber are under national newest standard. Functions: Develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. Approaches: Sit on the chair and step on the footboard. Stretching legs with force and recover slowly. Repeat. Users: Suitable for people of different ages. Installation of outdoor in cement concrete block of size 5”x 5” x 1 ¼” to the entire satisfaction of the Engineer-in-Charge.

Providing and Fixing of Wab Board. WAB BOARD complete in all respects having following specifications. a) All pipes should used in the equipments should be galvanised with 3mm thickness. b) Multi Colour Powder coating with polyster paints should be used on all the equipments. c) The foot pedal on all the equipments should be of aluminium only. d) The seats should be made of high quality plastic with colour scheme in yellow or orange. e) The high end bearings such as SKF/NBC must be used in all the equipments. Wab Board or Abbs Shaper Size:-972x980x462 mm Two Wab Boards are raised on the pendulum pillar for exercising and agility of the abdomen and muscles. Functions: Developing the strength and flexibility of lumbar and abdominal muscles consuming the fat in waist and abdomen, good for figure shaping and bodybuilding. Approaches: Hang up the round pipe with feet, crossing the hands behind head, making body backward to the trainer, recovers. Installation of outdoor in cement concrete block of size 5”x 5” x 1 ¼” to the entire satisfaction of the Engineer-in-Charge

Providing and Fixing of Space Walker –. SPACE WALKER complete in all respects having following specifications. a) All pipes should used in the equipments should be galvanised with 3mm thickness. b) Multi Colour Powder coating with polyster paints should be used on all the equipments. c) The foot pedal on all the equipments should be of aluminium only. d) The seats should be made of high quality plastic with colour scheme in yellow or orange.The high end bearings such as SKF/NBC must be used in all the equipments. 1 Dimensions- 1100*460*1480mm 2 Colour- customizable multi colour and complete powder coat 3 Size of main tube-114*3.75mm steel pipe 4 Size of supporting tube-38*3mm steel pipe 5 There is restrainer inside, swing lever is not more than 65degrees and having swing rod is made of 3mm steel tube. 6 Al alloy protecting covers are used at the top other main tubes to protect from the rainwater 7 Anti-skid components are used at the pedal parts, the resistance index is greater than 0.5mm 8 The distance between two pedals of the adjacent motion is no less than 100mm. 9 Anti theft cover is made by stainless steel/high quality plastic 10 The minimum height of the edge of swing component is not less than 80mm 11 Hazardous materials like coating agent, rubber are under national newest standard. 12 Radius of edge is no less than 3.0 mm. 13 The diameter of rotating shaft is not less than40mm Functions: The Leg & Thigh Exerciser provides excellent cardiovascular exercise while developing the leg muscles. Allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. Suitable for all ages. Installation of Outdoor in cement concrete block of size 5”x 5” x 1 ¼”to the entire satisfaction of the Engineer-in-Charge

Providing and Fixing of Riding Trainer Functions: The Body Shaper gives a full-body cardiovascular and toning work-out, pushing with the legs while pulling with the arms against resistance. Works arms shoulders, back legs, abdomen and legs with low impact exercise. Main central pipe is of 100 NB pipe. Sitting seat height from ground level/foundation base is 30”. Moving seat is fitted on 50 NB pipe which further attached to main central pipe. Front vertical pipe is of 40 NB and is connected to sitting seat pipe and to main central pipe. Handles are of 40 NB pipe. Size:- 787x660x1270 mm Installation of Outdoor in cement concrete block of size 5”x 5” x 1 ¼”to the entire satisfaction of the Engineer-in-Charge

Installation of Outdoor in cement concrete block of size 5”x 5” x 1 ¼”to the entire satisfaction of the Engineer-in-Charge

Please Enable Macros to View BoQ information