Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹21.1 LAccepted-AOC 94A APR COLONY BILHARI JABALPUR MP | JABALPUR | MADHYA PRADESH | 482020 | L-1 | Accepted-AOC Ravi Enterprises is the lowest bidder | |
| 2 | L-2₹22.8 L+₹1.5 L (6.95%)Rejected-AOC | L-2 | Rejected-AOC Not the lowest bidder | |
| 3 | L-3₹23.3 L+₹1.9 L (9.00%)Rejected-AOC 10 11 PANDRI GOVIND NAGAR RAIPUR CHATTISHGARH 492001 | RAIPUR | CHHATTISGARH | 492001 | L-3 | Rejected-AOC Not the lowest bidder | |
| 4 | L-4₹23.5 L+₹2.2 L (10.1%)Rejected-AOC PB NO 809 ABERDEEN BAZAR PO ATLANTA POINT NEAR POLICE WIRELESS PORT BLAIR 744104 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744104 | L-4 | Rejected-AOC Not the lowest bidder | |
| 5 | L-5₹23.6 L+₹2.3 L (10.6%)Rejected-AOC DAIRY FARM JUNCTION VIJAY BAUGH ROAD SRI VIJAYA PURAM 744 103 | SRI VIJAYA PURAM | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744103 | L-5 | Rejected-AOC Not the lowest bidder |
Tender Value
₹25.0 L
EMD Value
₹50,000
Closing Date
10 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GARRISON ENGINEER BRICHGUNJ PORT BLAIR -744103
ADDN ALTN TO TOILET AND CONNECTED BR AND EM WORKS AT BLDG NO P290 AT BRICHGUNJ MIL STN PORT BLAIR
2022_MES_568055_2
8305A
Open Tender
Civil Works
Item Rate
180 days
BRICHGUNJ
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER BRICHGUNJ PORT BLAIR
₹50,000
Yes
21 Jan 2023
27 Dec 2022
12 Jan 2023
27 Dec 2022
10 Jan 2023
3 Jan 2023
27 Dec 2022 - 3 Jan 2023
Amount
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises.
Taking down cement plaster on Brick / Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish out side of the MD Land all as directed by Engineer-in-Charge.
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specified complete all as directed.(plinthprotection)
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified .
S&F GI frame work for PVC ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm fixed to wall at approx 900mm centre to centre with Gleat and steel expansion fasteners with and including wall section of 0.55 mm thickness having kurled web of 50 mm and flange of 28 mm each with PVC sheet of 1.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre fixed with joining for ‘J’ trim & ‘T’ Section including hanging of 6 mm dia GI (upto 1200 mm length) adjusting level finished to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified and as directed
M&L 100 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub bases,
M/L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement.
M&L Virified tiles 10 mm thick (square/ rectangular) any shade polished, area of each tiles exceeding 0.42sqm and not exceeding 1.00sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick in Cement mortor 1:4 for laying floor finishes.
M&L Virified tiles 10 mm thick (square/ rectangular) any shade polished, area of each tiles exceeding 0.42sqm and not exceeding 1.00sqm, in wall surfaces(skirting/daddo) set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat of 10 mm thick in Cement mortor 1:4 all as specified and directed.
M&L Rendering 10mm thick on internal sides wall of Brick / Concrete Surfaces in CM (1:6) finished even & smooth without using extra cement.
M&L Rendering 15mm thick on sides of wall of Brick / Concrete Surfaces in CM (1:6) with level plast including 3 to 5% of water proofing compound finished even & smooth without using extra cement.( Note Waterproofing compound and level plast paid separately) Complete all as specified and directed.
Supply only integral WPC
M&L Rendering 10mm thick on concrete surfaces such as sofit of slab, chajja etc in CM (1:3) finished even & smooth without using extra cement.
Materials and labour for Preparation of New plastered surfaces of walls and applying two coats of Plastic emulsion paint over a coat of primer complete all as specified and as directed .
Materials and labour for complete removal of existing treatment on walls and applying one coat of Putty to make the wall surface in plumb line and applying two coats of Plastic emulsion paint over a coat of primer complete all as specified and as directed .
Preparation of old external surfaces of walls, Facias, cornices etc and applying one coat of weather proof anti fungal paint (Apex - ultima) on coat of external wall putty on walls all as per manufacturer instruction and as directed by Engineer-in-Charge.
M& L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed by Engineer-in-Charge.(Make Apex Ultima)
M & L For Providing and applying plaster of paris putty of 1mm thickness over plastered surface to prepare the surface even and smooth.
Taking down chowkats or frames exceeding exc 1.5 sq. m but n exc 4 sq. m each (Without taking off shutters & Grill from the frame).
S & F Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).
Supply and fixing factory-made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless-steel screws, joints mitered and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge.
Supply only 4.0mm thick Sheet glass ordinary quality and glazing with oil putty in Square n.exc 0.5sqm in each panel.
Supply only 12 mm thick prelaminated particle board to fixed in repair interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work.
S&F 100 Butt hinges extruded aluminium alloy, anodised. With galvanished mild steel hinge pin , anodised and fixed type B-21
S&F 200mm Aluminium anodised barrel tower bolts of extruded sections.
S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised.
Taking up or down, 25mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed by Engineer-in-Charge.
Taking up or down, 20mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed by Engineer-in-Charge.
S&F of Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe fittings fixed to walls and ceilings or laid in floors complete all as specified.(a) Outer diameter of pipe in 20 mm
All as per item no 31.00 here-in-before but Outer diameter of pipe in 25 mm
S & F in repairs1000 litres capacity Rotational moulded polythene water storage tanks(cylindrical vertical with closed top) hoisted in position all as specified in SSR Part I
S&F inrepairs 15mm Bore Stop Valves / Angular cock with wall flange chrome kubix prime Make: Jaquar Cat Code No KUP-CHR-35053PM.
S&F inrepairs 15mm Bore Stop Valves / Angular cock with wall flange chrome kubix prime Make: Jaquar Cat Code No QQT 7053.
S&F in repairs two way bib tap with wall Flange Make: Jaquar Cat Part NO QQT 7041 screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge.
S&F in Repair 6mm thickness looking mirror bevelled Edge mounted on bracket as necessary brequirement with chromium plated brass screws and cup washers complete all as specified and directed by the Engineer -in- charge..
S&F in repairs Gun Metal Gate valves 20 mm dia with iron wheel head screwed both ends for iron pipes.
S&F in repairs Chromium Plated Steel Grating of Jaquar Square Shape Body Shower, For Bathroom, Model Name/Number: Make: Jaquar Cat code no BSH-CHR-1751
S & F in Repairs Hand Shower (Health Faucet) with 8mm Dia 1.2 Meter Long Flexible Tube and Wall Hook Make: Jaquar Cat code No ALD-CHR-573 Complete all as specified and directed
S&F in repairs Tankless Wall Hung WC With Sensor Flush, PP Soft Close Slim Seat Cover, Hinges, Accessories Set, Size: 370 x 510 x 360 mm all as specified & directed by Engineer-in-charge. Make: Jaquar cat code no. CNS-WHT-963SPP.
S & F in Repairs Bib Cock Make: Jaquar Cat Code no QQT 7073 complete all as specified and directed.
S&F in repair Oval shape vitreous china white thin Rim table top basin of size 500x380x120mm with 32mm waste coupling brass chromium plated suitable for wash hand basins all as specified and directed by Enge-in-Charge. Make: Jaquar Cat code No JDS-WHT-25937
S & F in Repairs Bottle trap 32mm dia Make: Jaquar Cat code No ALD 769L250X190 complete all as specified and directed
S & F in Repairs Sensor type Urinal With Fixing Accessories, Size: 480x300x740 mm code NO URS-WHT-13255, Consealed Sensor Flushing Valve for Urinal with Complete Kit (Battery Operated) (Suitable For Urinal URS-WHT-13255 & sensor flush valve) Make: Jaquar Cat Code No SNR-CHR-51097 complete all as specified and directed.
S&F in repairs SS Towel holder all as specified. Make: Jaquar cat code no. AQN7711
S&F in repairs SS soap dispenser with glass bottle all as specified and directed. Make: Jaquar Cat Code No –ACN-1135N
S & F in Repair corner Glass Shelf with Bracket all as specified and directed Make: Jaquar Cat ACN 1173
S & F in Repair Towel Ring Round Complte all as specified and directed. Make: Jaquar Cat AQN 7721
S & F in repairs Robe Hook all as specified and directed. ( Make Jaquar-Cat Code No :- AQN 7791)
S&F in repairs aquisense sensor faucet for wash basin with base flange all as specified and directed. Make: Jaquar Cat No –SNR-CHR-51011.
S&F in repairs PVC flexible connections 15 mm dia 450 mm long with brass checknuts .
S&F in repairs paper towel dispenser, wll mounted AISI 304 stainless steel finish with a capacity of 400-600 c/z towels all as specified and directed by Engr-in-Charge. Make: Jaquar Cat codeno PTD-SAP-DT0106CS
S&F in repairs hand dryer –optima, AISI 804 stainless steel finish all as specified and directed by Engr-in-Charge. Make: Jaquar Cat Code No –HDR-WHT-M14A .
S&F in Repair Jaguar Metropole Flush Valve Duel flow 40mm Size (Concealed Body) With Exposed Shut off Provision & 100mm Square Plate (3.0/6.0 Lts Per Flushing) Cat Part No FLV1089N5Q all as specified and directed by Engineer in charge.
S&F in Repair Jaguar Toilet Paper Holder Make: Jaquar Cat Part No AQN 7751 all as specified and directed by Engineer in charge. .
S&F in Repair Jaguar Glass Shelf 550mm long Make: Jaquar Cat Part No AQN 7771 all as specified and directed by Engineer in charge. .
S&F in Repair Jaguar Model No 111Q UC Curved Shapped Urinal Patriation with toughened Glass 10mm thick finish chrome incl fixing with ss Brackets Make: Jaquar Cat Part No JSE CHR 110UC 450X all as specified and directed by Engineer in charge
S&F in Repair 20mm thick marble tiles machine cut in skirting/dado/ Cooking Plate form / Table Top laid over cement screed and jointed with grey cement slurry including cutting and polishing of type all as specified and directed by Engineer in charge. ( Note :- Colour/ Shade is finalized by GE)
S&F in Veneer Paneling of 4mm thick for Wall Skirting/ Dado / Cooking Plat form/ Table Top Over Slab fixed with necessary adhesive complete all as specified and directed by Engineer in charge.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor.
S&F 75mm dia outlet PVC (SWR) PVC (SWR) multi floor trap with grating including jointing with solvent cement.
S&F PVC (SWR) Gully trap 125/110 mm,seting and incl joining with solvent cement
S&F 110mm PVC (SWR) WC connector bent type setting including Joining with solvent cement
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floors.
S&F 75mm dia PVC (SWR) bend with oval access door
S&F 110mm dia PVC (SWR) bend with oval access door
S&F 75mm dia PVC (SWR) bend with oval access door
S&F 110mm dia PVC (SWR) bend with oval access door
S&F PVC (SWR) cowls 100mm dia.
M&L for precast man holes cover slab with 1:2:4 type B1 using 20mm graded stone aggregate set in CM 1:4 incl cost of use and waste of clean sawn wooden form work but excl cost of reinforcement all as specified
M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in surface channel / benching incl cost of use and waste of clean sawn wooden form work all as specified
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi-ted/stoped ends etc
M&L in repairs water proofing treatment to RCC roof by priming the plastered surfaces with a coat of cold applied bituminous primer conforming to IS 2488 @ 0.30 kg/sqm and laying APP modified five layer polymeric membrane 3mm thick of minimum wt. 3.50 kg/sqm reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) laid by torch application as per the manufacturers instructions with side overlap of 75mm & end overlap of 100mm & tucked into the chases on vertical surfaces to a height of 300mm & finally finished with bituminous aluminium paint @ 0.10 kg/sqm complete including taking down existing roof treatment all as specified and as directed.
M&L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in padding to roof slab and rendering 5 mm thick in one layers on concrete surface cement sand mortar 1:3 using water proofing compound @ 3% by weight of cement finished even fair and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note:WPC will be measured and paid separately.
M&L for 20mm thick Granite of any type work table rubbed and polished in steps, jambs , pillars, cooking platforms and the like including pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including Screed bed of coat 20mm thick CM (1:4) complete
M & L for RCC 1:1.5:3 nominal mix as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in,shelves and the likeall as specified and directed
Use and waste of form work to sides and sofit of Roof Slab & Chajja etc for Fair finished surfaces.
TMT bars 10 mm dia and over cut to length bent to shape required and binding with mild steel wire annealed not less than 0.9 mm dia
S&F Steel works In tubular/ posts/ trusses/ purlin including special shaped washer etc.complete using ERW or induction butt welded tubes conforming to IS 1161-1797 grade St 240.
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc and fixed by riveting or welding or with nut and bolts (including nuts and bolts) conforming to Fe-410-W grade E 251 Quality B complete all as specified and directed.
S&F 0.50 mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws as specified.
S&F 0.50 mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws as specified.
M&L Painting to new steel and iron surfaces of exc. 10cm wide or girth by two coats of synthetic enamel paints over a coat of red oxide primer including preparation complete all as specified and as directed.
S&F 12 mm thick toughened frosted glass in required size crystal polished at the edges and with full etched design as approved by GE in different colours fixed with SS brackets of size 50x25mm,100mm long made out of 3mm thick SS sheet at the top and bottom including provision of Dorma XLC fittings & Dorma floor springs or SS pivot, stainless steel handles 600mm D type and locking arrangement to each door, stainless steel hinges to connect glass to glass, wall to glass connector, magnetic seal, middle seal and the water dispenser etc all as specified and directed by Engineer in charge.
Taking down carefully, copper/aluminium point wiring (Light, fan, scoket or power) complete, including fittings and fixtures such as switches, ceiling roses, regulators, sockets etc., and making good disturbed surfaces of walls floors, etc., complete all as specified and as directed by Engineer-in-Charge.
M & L for point wiring complete with single core multi stranded Copper conductor FRLS cable of size 1.5 sqmm PVC insulated unsheathed 1100 volt grade in and including PVC conduit suitable size including Tee junction bends etc concealed in wall/fixed on ceiling and PVC switch board hylam sheet of 3mm thick including M.S. sunken boards of suitable size for housing switched sockets etc including 1.5 sqmm. green PVC insulated wire for earth continuty. including Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth in brick wall. complete all as specified and as directed by Engineer-in-Charge. One light point/bell point point controlled by one switch
One fan/exhaust point controlled by one switch
One 3 pin switch socket outlet point 5 amps on same board with other switches.
One 3 pin switch socket outlet point 5 amps on independent board.
Supply and fix ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed by Engineer-in-Charge
Supply and fixing Modular switch 1 way 6 A, 1 module all as specified and directed.
Supply and fixing modular socket outlet, 2/3 pin combined , 6 Amps, 2 module, 230 volts all as specified and directed.
Supply and fix in repair metal enclosure distribution board SPN 4 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed.
Supply and fix MCB single pole, 240 volts, 5 to 32 Amps, all as specified and as directed.
Supply and fix MCB SPN 240 volts, 5 to 32 Amps, all as specified and as directed.
S & F LED decorative ultra slim, mirror light fitting 1 x 10 Watt provided with high output diffuser including high efficiency electronic driver complete with LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable of size 1.5 Sq.mm from ceiling rose to connector block, including taking down old unserviceable mirror light fitting of any wattage, complete all as specified and directed by Engineer-in-Charge.
Supply and fix slim, ceiling mounted LED 9 w Round type with in die cast aluminium housing finished in premimum white powder coating prewired upto connection block and connecting with three core PVC copper flexible cable of size 1.5 Sq.mm from ceiling rose to connector block, including taking down old unserviceable fitting of any wattage, complete all as specified and directed by Engineer-in-Charge.
M & L in repairs for sub main wiring complete with two runs of 4 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC conduit suitable size including Tee junction bends etc concealed in wall/fixed on ceiling and PVC switch board hylam sheet of 3mm thick including M.S. sunken boards of suitable size for housing switched sockets etc. including Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth in brick wall.with one run of 4 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre.
Supply and fix ventilating fan Ventil Air DX whitesuitable for on working of AC 230 V , 50 Hz 250 mm sweep ,incl louvers complete all as specified .
Supply and fix Wall mounting fan electric driven single phase230 volts, oscillating type, 300 mm sweep, high quality ABS base with high speed motor and balanced blades and three leafed with 3 core copper cable of suitable size, complete all as per specified.
SKY GROUP
KRISHNA TRADING COMPANY
Chandra Construction Enterprises
Sree Tirumala Enterprises
DHAKSHNA MOORTHY AND SON
Tropical Refrigeration
M/s Susanta Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .