SPECIAL REPAIRS TO SMC(BldgNo.P/160) AT AF STATION TAMBARAM

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L Screed bed or bedding layer of mortar 15 mm in CM 1:6, thick for laying floor finishes complete all as specified and as directed

M&L Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat of Skirting/Dado etc complete all as specified and as directed

S&F Joint free glazed ceramic tiles in vertical surface 300x 450x 7mm/ 350X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed

S&F Joint free Non - skid coloured ceramic tiles10 mm thick (square/ rectangular) area of each tile exc 0.11 sqm and n.exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed

S&F Joint free Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed

M&L Plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate), 25mm thickness as in floor finishes etc complete all as specified and as diretced

Demolition of stone slabs and tiles of any description or thickness in foors, platforms, aprons etc. laid bedded and pointed in any mortar complete all as directed

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

M&L for Marble(Makrana white) work 25mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed

M&L Rounding to edges of granite stone etc. slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed

M/L rubber mould machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness,M-35 Grade with grey cement and pigment all as specified and as directed

S/F prepolished chequered cement concrete floor tiles with white cement and pigmented conform to IS 1237-1980 (Reaffirmed in 1996) for heavy duty tiles (exterior grade) of 22 - 25 mm thick, laid in cement slurry and pointed with white cement with admixture of pigment to match the shade. Abrasion and wear resistance as per manufacturer's instruction. Pattern, size and shade all as specified and as directed

M&L Screed bed or bedding layer of mortar 20 mm in CM 1:6, thick for laying floor finishes complete all as specified and as directed

M&L PCC 1:4:8, Type D2 (using 20 mm graded stone aggregate), 75 mm thick, as in sub base all as specified and as directed

M/L sand filling under paver blocks including watering and consolidation all as specified and as directed

M/L for providing precast cement concrete in kerb stones in PCC 1:2:4, type B1 (20mm graded aggregate), with plain fair faces, including chamfers, weatherings and setting in cement mortar 1:4 complete with joints to match all as specified and as directed

Taking down cement or cement lime plaster on concrete surfaces of wall, ceiling, soffits of beam and the like etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Rendering 5mm thick in CM 1:3 on fair faces of concrete surfaces(Ceiling) finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply and application of Drilling and fixing injection packer and grout the Low viscous epoxy injection Resin Grout system of LVEP by using electrical operation Pump all as specified and directed by Engr-in-Charge. Note : For Beam and column area Drilling and fixing the Injection Packers and mixing and inject the two components (comp ‘A’ and comp ‘B’) Low viscosity Injection Material with electrical operation pump. All as per manufacture's instruction. Approved agency - Bostik, STP, SIKKA

Taking down cracked loose plastering of highly deteriorated portion of RCC beams, pillars, chajjas, slab and lintels including cleaning the reinforcement bars of any size by scapping and removing rust by using rust remover and applying epoxy based anti corrosive coating of Zinc Rich primer and applying bonding agent of Boscocem 475 SBR latex on the surface of old concrete as per manufacturers recommendation, recasting RCC members with cement concrete type A0 1:1.5:3 using 12.5 mm graded stone aggregate mixed with acrylic latex based additive of Hydroment 476 @ 10 ltrs per 50 kg of cement including finishing matching with existing finishes all rendering 10 mm thick over concrete surfaces in cement mortar 1:3 including application of three coats of white wash/ Oil Bound Distemper/ Colour wash after preparation of surface or the proportion recommended by the manufacturers including all necessary formwork all as directed at site. Note : Replacement of reinforcement where necessary before recasting RCC reinforcement shall be measured and paid seperately. However the cost factor towards sacffolding etc for carrying out these items of work at various heights upto 4.00 Mtr shall deemed to be included in this item. Approved agency - Bostik, STP, SIKKA

Dismantling of brickwork or stone/ boulder masonry, built in cement mortar including ashlar facings, dressed stonework and precast concrete articles etc., complete all as specified and as directed

M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM 1:4, complete all as specified and as directed

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m meanradius, built in CM 1:6 complete all as specified and as directed

M&L rendering 15 mm thick brick walls with CM 1:6 finished even & smooth without using extra cement

M&L Preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L Preparation of newly plastered Internal walls and applying two coats of distempering with 1st quality acrilic distemper over coat of primer and applying plaster of parris putty 1mm thickness over plastered surfaces even and smooth complete all as specified and directed

M&L Complete removal of exiting treatment and applying three coats of white wash on ceiling complete all as specifed and as directed

M&L for Complete removal of existing treatment of Internal walls and applying two coats of distempering with 1st quality acrilic distemper over coat of primer and applying plaster of parris putty 1mm thickness over plastered surfaces even and smooth complete all as specified and directed.

M&L for Complete removal of existing treatment of external walls and applying two coats of exterior emulsion (Apex) paint over a coat of Primer complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc.1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) but exc.1.5 sqm and n exc 4 sqm each complete all as specified and directed.

S&F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed second class hardwood complete all as specified and as directed.

S&F Glazed and skeleton shutters 35mm thick, using first class hardwood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

M&L Preparation of old wooden surfaces and applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F Powder coated aluminium window and ventilator shutters, side hung type wthout sash bars, aluminium sections weighing 0.55 kg/m includingnecessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F Frosted glass 5.5mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specifeid and directed

S&F Second class hard wooden shutter 45 to 55 mm thick (Factory made) (Double leaf/single leaf) with structural composite lumber rail,stile with surface material (Laminated on both sides) and insertion of lead sheet 1 to 4mm thick for radion protection placed in the core of the door leaf incl silicone perimeter seal in the back of the rabbet and Grade 304 or 316L stainless steel door frame welded casing and casing adopted to the wall with stainless steel lock,face plate,lever and handle all other fittings and the door surface made of HPL with and antibacterial (For X-ray & MRI Room) complete all as specifeid and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made outof 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification &drawing) complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face fiixing in frame at site as per specification & drawing complete all as specified and directed.

S&F Aluminium anodised,150 mm long barrel tower bolts of extruded section and fixed complete all as specified and as directed

S&F Extruded aluminium alloy handles,150mm long fabricated type, anodised complete all as specified and as directed

S&F Butt hinges 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed

S&F Aluminium alloy, anodised,sliding door bolt of 250mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

All as per item no. 46 above but in repairs all as specified and directed.

M&L Preparation of new wooden surfaces and applying one coat of primer and two coats of synthetic enamel paint complete all as specified and as directed

S&F Aluminium anodised,250 mm long barrel tower bolts of extruded section and fixed complete all as specified and as directed

S&F Plain framed, panelled shutter second class hardwood rail and syle, 35mm thick (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed

S&F Aluminium alloy, anodised, sliding door bolt of length 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F Floor door stopper size, 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed

S&F Aluminium anodised window sliding shutter shutters without sash bars, aluminium section 45.2 x 35 x 1.30mm (for frame, Jindal section No. 20664) and 37.5 x 15 x 1.60mm (for shutter, Jindal section No. 20597) of make JINDAL or equivalent including rubber packing anodised aluminium snap beading etc, with 4mm thick plain glass including necessary locking arrangement and all fittings such as hinges, handles, stays etc, complete all as specified and as directed. Note :- Alumium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.

S&F Aluminium anodised grills (Pattern DG-104) bull nosing and polishing of edges 10mm thick with weight not less than 2.5 Kg/sqm for windows, ventilators etc., including 'F' section of size 23.4 x 15.3 x 1.4mm thick, joining cleats etc., complete all as specified and as directed

S&F Aluminium anodised doors frame with shutters of standard JINDAL or equivalent section of size 63.5 x 38 x 1.6mm for frame and section size 47.62 x 44.45 x 1.18mm for vertical style section size 46.72 x 44.45 x 1.4mm for top and central rail section size size 99.25 x 44.25 x 1.16mm for bottom rail, section size 19 x 17.3 x 0.80mm for glazing clip for shutter including faabrication to required size and partly panelled with 12mm thick both side prelaminated particle board and partly glazed with 5mm thick dark tinted glass including fitting etc including pivot, handle, mortise lock heavy duty complete all as specified and as directed Make: Jindal/ Hindalco Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.

S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg of aluminium (extruded section) body and fixed complete all as specified and as directed

Removing existing padding concrete and plastering, APP membrane etc., including removal of debris, old APP membrane etc., outside MOD land and applying water proofing treatment on horizantal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/Sqm over newly plastered surface and providing 4mm thick APP modified water proofing membrane weighing not less than 4 Kg/Sqm reinforced with non woven polyster matt weighing not less than 160gm/Sqm including minimum 10cm side lap and 15cm end lap torch sealed and bonded and applying a coat of blown grade hot bitumen 90/15 over and below the membrane @ 1.20 Kg/Sqm in drying over the membrane finished with solar reflective bituminous aluminium paint/primer @ 0.10 Kg/Sqm over plastered RCC roof slab/parapet after cleaning the surfaces by removing dust, dirt etc., complete all as per manufacturers instruction and as directed (Note: concrete padding and plastering incl WPC will be measured and paid seperately)

M&L Rendering 10mm thick in CM 1:4 with water proofing compound @ 200ml per bag of 50 kg by weight of cement over RCC slab, parapet and the like etc. finishing fair and even complete all as specified and as directed (Note: WPC will be measured and paid sepertely)

M&L Plain cement concrete type B-0, 1:2:4 (12.5mm graded aggregate), 50mm average thickness with WPC over RCC roof slab complete all as specified and as directed

M&L RCC 1:2:4,(using 20mm graded stone aggregate)as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like compplete all as specified and as directed

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and as directed

S&F TMT steel bars 6-8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed

Taking down GI steel tubing and connections, 15mm bore including cleaning for refixing or removal to store

Taking down GI steel tubing and connections, 25 mm bore including cleaning for refixing or removal to store

Taking down GI steel tubing and connections, 20 mm bore including cleaning for refixing or removal to store

S&F GI tubes medium grade galvanised with (Concealed) all fitting and fixed complete to walls and ceilings or laid in floors 15mm bore.

S&F GI tubes medium grade galvanised with (Concealed) all fitting and fixed complete to walls and ceilings or laid in floors 25mm bore.

S&F GI tubes medium grade galvanised with (Concealed) all fitting and fixed complete to walls and ceilings or laid in floors 20mm bore.

S&F in repairs rotational moulded polyethylene water storage tanks 1000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed

S&F in repairs 25mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed compete all as specified ans as directed

S&F in repairs 25mm bore Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed

S&F in repairs Wash down water closet (Pedestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device,incl flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for high/low level cistern etc compete all as specified and as directed

S &F vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including, fushing cistern low or high level, 32mm dia polyethylene fush pipe etc compete all as specified (excluding cost of flush tank) including provn of lime concrete bedding fixed in repairs

S&F in repairs PVC valveless, syphonic action type of 10 liter capacity, flushing cistern,low level, white, with inlet, ball valve, float and handle including brackets and PVC connections of 15mm size with PTMT nuts of length 600 mm etc., complete all as specified and as directed

S&F in repairs Vitreous China urinals, half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed

S&F Urinal spreader of CP any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed

S &F in repairs counter type any shape vitreous china wash basin of size 595-690mm including cutting for and pinning in ends of brackets or errecting stand white 32mm dia polyethylene waste pipe, PVC connections 15mm size with PTMT nuts of length 300 mm, 32mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwd for pipe or connections including necessary packing, union and cap and fixed etc including brackets compete all as specified and as directed

S&F in repairs Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed

S&F in repairs Bib taps 15mm bore, CP with crutch or butterfly handle,fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed

S&F in repairs Pillar taps 15mm bore, CP, with capstan heads,chromium plated,fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

S&F in repairs PVC connections 15mm dia, 300mm long for cold/ hot water connections with brass or PTMT fly nuts and washers at both ends all as specified and as directed.

S&F in repairs Stop valve/Angle valve 15mm bore, cast copper alloy,fancy type, chromium plated screwed down, high pressure,with crutch or butterfly handle, screwed both ends for iron pipe concealed surface or for unions and fixed complete all as specified and as directed

S&F Tubular towel rail, CP 20mm dia, D type, 60cm long between flanges complete all as specified and as directed

S&F Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified and as directed

S&F in repairs CP health faucet (ABS body) with 15mm dia hose pipe 1.2m long & hook including all necessary fittings complete all as specified and as directed

Demolition of Reinforced cement concrete as in RCC OH Tank and the like etc., of any description and in any position not otherwise specifically provided for complete all as specified and as directed

Providing precast cement concrete louvres and jallies, type C0, 1:3:6 (using 12.5mm graded stone aggregate) set CM 1:6, 50mm thick (measured solid), including all mouldings and frame to match with existing size and pattern complete all as specified and directed

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, internal dia of pipe 150mm including necessary excavation if required complete all as specified and as directed

M/L 150mm dia RCC hume pipe (NP-3) laid in trenches and joints as specified complete all as specified and as directed

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested;in cement concrete 1:3:6, Type C2 (using 40mm graded stone aggregate) for 150mm dia pipes complete all as specified and as directed

M&L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching for 150mm dia as required

S&F in repairs PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed

S&F in repairs PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as speccified and as directed

S&F in repairs PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F in reairs PVC (SWR) bends with access door any radius 110mm bore complete all as specified and as directed

S&F in reairs PVC (SWR) bends with access door any radius 75mm bore complete all as specified and as directed

S&F in repairs PVC (SWR) branch piece,110mm bore single (single Y) equal or unequal with access door complete all as specified and as directed

S&F in repairs PVC (SWR) branch piece,75mm bore single (single Y) equal or unequal with access door complete all as specified and as directed

S& F in repairs PVC (SWR) junction single,(Single T) 110mm bore with access door equal or unequal complete all as specified and as directed

S& F in repairs PVC (SWR) junction single,(Single T) 75mm bore with access door equal or unequal complete all as specified and as directed

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed

S&F in repairs Gratings round 100/75 mm size of SS (Minimum weight 50gms) complete all as specified and as directed

M&L Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil

M&L Cement concrete, type D2 (1:4:8, 40mm graded stone aggregate) as in foundations,filling and mass concrete complete all as specified and as directed

M&L Plain cement concrete type B1, 1:2:4 (20mm graded stone aggregate) as in coping, benching and the like including weathering, slightly rounded or chamfered angles and throating etc complete all as specified and as directed

M&L Returning, filling in hard dense soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed

M&L Removing excavated material of hard dense soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed

Dismantling timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided forcomplete all as specified and as directed

S&F Stainless steel handrails, fabricated to required design, using 304 L stainless steel pipes of 50mm dia welded to 25mm dia stainless steel pipe balusters @ 300mm centre to centre and fittings, including welding and polishing and fixed to floors with necessary stainless steel plates, flanges,canopies, screws etc., complete all as specified and as directed

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F Fancy type CP sink cock fancy type (long body) screw down for iron pipe or for brass female and suitable for 15mm bore complete all as specified and as directed.

Cutting chase pinning in making good to facing where required and pointing in cement mortar 1:3 for concealed water tubing etc and making good cutting n.exc 10cm girth.

Demolition of brickwork,PCC or stone / boulder masonry in floor or wall built in cement mortar

Demolition of plain cement concrete of any description and in any position

M&L PCC Type D2 (1:4:8) using 40mm graded stone aggregates as in foundation, filling and mass concrete

M&L for flyash brick work with sub class B bricks straight or curved on plan exc 6M mean radius built in CM 1:4

M&L rendering 10 mm thick brick walls with CM 1:4 finished even & smooth without using extra cement

M/L providing plain cement concrete 1:2:4, type B1 (using 20 mm graded aggregate) as in cills, steps, bands, copings, bed plates , etc including necessary form work, all as specified and as directed

M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over one coat of alkaline resistent primer all as specified and directed.

Dismantling RCC fencing posts or struts of any section embedded in concrete, including taking out embedded portion and making good disturbed ground

Dismantling fencing wire mesh, any type

Excavation in post holes (or similar holes) in hard/dense soil each n exc 0.5 Cu m, getting out, returning, filling in and ramming earthor broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface

M&L PCC Type C2 (1:3:6) using 40mm graded stone aggregates as in foundation, filling and mass concrete

S&F for Joist, channel, angle,MS Flat or tee sections, fixed independently, without connecting plates, etc. cut to ordinary lengths as in fencing posts complete etc as in chain link fencing posts and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc for securing wire mesh etc, and similar work conforming to Fe-290 Gde E-165 all as specified and as directed

M&L MS bars 10 mm dia and over,cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia

S/F mild steel screw bolts (machine made), diameter of shank 11 to 15 mm, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt n exc 15 mm long

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc, including provision of binding wire

Supply only chain link MS galvanised fencing 3.15 mm dia wire, size of mesh 50 x 50 mm, made up to mattress or cages, all as specified and as directed

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer

M&L for preparation of new steel surfaces of any description, n exc 10 cm in width or girth, and applying two coats of aluminium paint over a coat of red oxide primer all as specified and as directed

M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Material and labour providing precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slabs including necessary form work etc., complete. Note : Reinforcement shall be measured and paid separately.

M&L Surface dressing n exc 15 cm deep in hard/dense soil complete all as specified and as directed

M & L 100mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) in Sub-floors, sub-bases, Floors and Pavings, etc.

M&L two coats of exterior emulsion(Apex) paint over a coat of primer in newly plastered wall surfaces including preperation of surface all as specified and directed

Supply only liquid WPC

Taking down sub main wiring any description along with metal conduit and made good the distributed surface all as specified.

Taking down U/SD DB/ Metal clad boxes any description or size/way incl MCCB/ MCBs complete.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete fittings such as switches, sockets, ceiling rose, pendents, regulators etc complete as ordered and removing retrived materials and making good the disturbed surface of wall, floors, ceiling etc, complete all as directed and specified.

M/L for Point wiring concealed type complete with 1.50sqmm (Nominal area) PVC FRLS insulated, un-sheathed, multistranded, copper conductor, single core, cable 1100 volts grade drawn through in and including PVC conduit along with suitable size complete with PVC conduit fittings/ accessories including provn of 1.6 thick MS terminal boxes concealed with 3mm thick hylem pressed laminated/ hylamp sheet top cover for housing of switches, sockets, and regulators etc including 1.50 sqmm PVC insulated sheathed stranded copper conductor for earth continuity conductor and connected to common earth dolly for the following :- (a) One light point controlled by one switch.

One fan point controlled by one switch.

One socket point on Independent board.

One socket point on same board with other switches.

Description all as per item No 4(a) above but with 2.5 sqmm incl earth continuity conductor 2.5 sqmm size for power point 15 amps.

Ceiling rose surface PVC insulated three plates "JUMBO" type 240 Volts.

Supply and fix socket outlet 2/3 pin 5 amps 240 volts flush type.

Supply and fix switch socket outlet 2/3 pin 5 amps 240 volts flush type.

S & F Switch socket combination 2 in 1 mulitpurpose 5/16 amps 240 volts universal type.

Switch flusht type 5 amps 240 volts single pole one way.

S & F Fan regulator electronic type with 5 step control suitable for 1200/1400 mm ceiling fan.

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete one single pole MCB 20 amps, 240V complete conceated on wall and connecting with all connections all as directed by Engr in charge.

S & F LED fitting 4 feel long with light source 20 Walt general purpose and wall/ ceiling mounted led Batten with polycarbonate LED channel & integrated electronic driver (Make - Surya visco Cat Part No- SLE BT20 IL or equivalent)

Cutting chase, pinning in making good to facings where required and pointing in cement motor 03 to ends or edges of andings steps, chills sunshades, shelves intels etc connected conduit for submarg wnning and making good cutting exceeding 10cm but not exceeding 20cm girth complete.

M & L Sub main wiring 2x4 Sqmm single core FRLS PVC insulated unsheathed cable single core multistranded copper conductor 1100 volts grade drawn through with 20mm PVC conduit and condut accessories fixed on surface/ concealed with suitable clamps/ saddles including one run of 4 sqmm FRLS PVC insulated copper cable for continuous earth conductor connected to common earth dolly.

M & L Sub main wiring 2x10 Sqmm single core FRLS PVC insulated unsheathed cable single core multistranded copper conductor 1100 volts grade drawn through with 20mm PVC conduit and conduit accessories fixed on surface/ concealed with suitable clamps/ saddles including one run of 10 Sqmm FRLS PVC insulated copper cable for continuous earth conductor connected to common earth dolly.

Supply and fixing of Sheet metal enclosure with distribution board double door 230 volts SPN 4 way with suitable Bus bar and provision for MCBs/ isolators concealed on wall and connecting with all connections all as directed by Engr in charge.

S & F in replacement of MCB's 6-32 amps, 10KA, SPO 240C B Curve.

S & F in replacement of MCB SPN 40 Amps, 10 KA, 240V B Curve.

Material and labour for earthing complete with GI plate electorate 600x600x6mm thick buried directley in ground (eqarth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below ground level connected to earth lead of 4mm GI wire means of bolts, nuts, washers of galvanized all as shown in electrical plate No 3 of SSR Part-I including necessary excavation and earth work PCC 1:3:6 type C1 chamber. RCC cover in 50mm thick 1:2:4 type B1 wutg 8mm CTD 140mm centre to centre with suitable handle, watering pipe 20mm dia light grade pipe with funnel, charcoal salt connected to earthing test point all as specified including testing and commissioning on completion.

S & F LED security light 45 Watt made up pressure die cast housing with toughened glass and individual high power LEDs with secondary optics IP66 protection complete all as specified (Make - Havells ENDURE SUNDOWN CAT PART NO. ENDURASUNDOWNSL45WLED765PASYBOPC or eqvlt in BAJAJ/WIPRO

Taking down U/S GI Pipe mounting bracket with clamp set of Builing Security light and S & F of GI Pipe mounting bracket made out of GI pipe 32mm dia or any modification requried in it as per site requirement light grade of length 1.5 mtr with two half clamps made out 50x6mm Flat Iron with nuts bolts and washers fixed on wall of building all as specified.

RAVI ENTERPRISE

SREE BALAJI ENTERPRISES

meenakshi construction