AUGMENTATION OF NFS INFRASTRUCTURE IN HQ 17 CORPS FOR 2 X NFS ACCESS POINT AND CERTAIN REVENUE WORK AT PMS UNDER GE (P) PANAGARH

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil

Returning , filling in including spreading, levelling, watering and well ramming in layers n exc 25 cm.

Removing sourplus soil to a distance exc 250 but n exc 500 mtr where directed at a level n.exc 1.5m above the starting point.

Supply and installation testing and commissioning silent Diesel Engine generating set 415 volts 30 KVA 3 phase 0.8 power factor, 50 Hz, 1500RPM self exicited self regulated brushlessAC generator installed including AMF panel,suitable for ambient condition at Panagarh and confirming to condition under ISO 3046, IS:10001/ 10002,BS 5514/5000 with capacity of 10% overloading for one hour in every twelve hour duration and including the following accessories :- (A) Alternator:- Synchrounous alternator rated at 30 KVA suitable for continuous operation at 1500 RPM generating 415 volts at 0.8 p.f (lag) suitable for 50 Hz, three phase, 4 wire system.The alternator shall be brushless, single bearing, self excited/ self regulated with an AVR. The alternator will be suitable for climate and shall generally confirm to IS: 4722 :2001. The salient features of the alternators are :- (a) +-1% voltage regulation (max) in static conditions. (b) IP:23 protections with class 'H' insulation. (c) Permanent lubricating bearing.

Item No. 4 Contd...(B) Diesel Engine:- Adquate capacity of diesel engine water cooled to drive independently above alternator and after considering de-rating as per site conditions after generating and reducing power consumed by accessories directly coupled through flexible coupling multi cylinder multi stroke direct injection, cold starting 1500RPM, as per relevant IS/BS complete with standard accessories . (C) ACOUSTIC ENCLOSURE : Acoustic enclosure shall be powder coated and fabricated out of 16 SWG CRCA MS sheet. The silent canopy shall be of nut bolt type construction. Critical processes of punching is done on CNC machines to maintain dimentional accuracy of holes within 0.1 mm.Powder coating is done after seven-tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE-RETARDANT foam as acoustic material & Rock wool for hot zone.Adequate hinged doors shall be provided to canopy, one door shall have glass window for control panel visibility. (D) AMF Panel :- Automatic Mains Failure (AMF) panel made of CRCA sheet of 2 mm thick including necessary arrangement to install, testing and commissioning & connecting to load cable up to changeover switch, suitable capacity of 4 pole MCCB complete all as per OEM recommendation.

Item No. 4 contd... (E) Civil Works :- All civil works including PCC platform and related foundations. incl for panel and equipments incl making goodof disturbed area during installation and commissioning of genset. The depth and size of the foundation and PCC as recommendedby the manufacturer. MAKES :- Make of engine : CUMMINS/KIRLOSKARGREEN/ASHOK LEYLAND/ GREAVES COTTON. Make of alternator : KIRLOSKAR ELECTRIC / ALSTOM / CROPTON GREAVES /SIEMENS AMF PANEL SPECIFICATION : AS PER MANUFACTURER SPECIFICATIONS

M&L for Earthing of Machinery equipment set installed at with galvanised earth plate electrode 600 x 600 x 6 mm thick burried directly in ground ( earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 meter below normal ground level, the earth plate surrounded by a mixture of charcoal dust and salt to a packed thickness of 150 mm on all sides with and including necessary exacavation earth work returning, filling in and removal of surplus soil upto 50 mtr including GI strip 32x6 mm flat bolted and revetted to earth plate at one end in and connected to continuous GI earth lead encased in and including 40 mm GI light grade pipe with all fittings from top edge of earth plate complete as specified and as shown in electrical plate no 3 power house/substation, using 32X6mm galvanised Ms strip & MS galvanised plate of size 600x600x6mm as earthing lead.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core to connect external lighting complete all as specified and as directed. NOTE : Earthworks, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core to connect external lighting complete all as specified and as directed. NOTE : Earthworks, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items. Make for item Nos.7& 87:- Polycab / Havells India Ltd./ Gloster Cables Ltd. /KEI Industries Ltd / ASIAN Cable / ) Finolex / RR Kabel Ltd / Gold Medal electricals PVT Ltd.

M&L Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 cm in depth after laying the Cable) and consolidated (punned) upto 18 cm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only shall be measured and paid .

Supplying and laying fly ash bricks laid in trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

S&F Galvanised Iron Pipe 40 mm bore (dia),Medium grade as in cable protection with wall ,under road crossingetc , complete all as specified and as directed. Make:-Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 130 V to 300 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity suitable for 2.0 TR AC complete all as specified and as directed. Make:- Voltamp / APLAB / Andrew Yule /Brentford /AE /Vintek (Brand Name-Volina) / V- Guard

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality of capacity of 2 TR, BEE 5 star rated. Make:- Blue Star / Voltas / Hitachi / Daikin / Carrier.

M&L for MODULAR Point wiring of with 1.5 sqmm multi strand PVC insulated unsheathed FRLS copper conductor cable drawn in and including non metallic rigid PVC concealed conduit ISI marked, medium duty for one light, fan/bell point controlled by one switch including inner and outer frame plate matching with surrounding with Modular sunken steel boxes zinc oxide plated of suitable size including Modular sheets of suitable module and back plates etc complete, including PVC green insulated unsheathed FRLS 1.5 Sqmm multistrand copper conductor cable as continious earth wire and connecting to earth duly, complete all as specified and directed. Note:- Cutting of chases as required and making the surface good to match with the existing is deemed to be included in the unit rate quoted. Make for cable:- Polycab / Havells India Ltd./ RR Kabel Ltd./ Finolex / Nicco / KEI / Gold Medal Electricals Pvt Ltd. Make for conduit:- Presto Plast / ) Finolex /) Indo American Electricals Ltd. Kalinga Gold / Richa Cable Pvt Ltd :- Plaza / Precision.

All as per item No. 14, above but MODULAR 5 Pin 5 Amp Socket on the same board.

All as per item No. 14, above but MODULAR 5 Pin 5 Amp Socket on independent board.

All as per item No. 14, above but for MODULAR 15/16 Amps socket outlet independent board with 4.0 sq mm copper conductor complete all as specified and directed.

M&L for Modular switch way 6 Amps, 1 module, complete all as specified and directed.

M&L for Modular switch 1 way 16 Amps, 1 module, complete all as specified and directed.

M&L for socket modular 6 Amp/16 Amp, 6 Pin multipurpose, 2 module, complete all as specified and directed.

M&L for socket outlet modular 6 Amp, 2/3 Pin multipurpose, 2 module, complete all as specified and directed.

M&L For Fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 120W- 2 module including necessary connections complete all as spd and directed.

M & L for ceiling rose, PVC/Polycarbonate three terminals complete all as directed. Make for item Nos. 18 to 23:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL/ C&S / Standard / Gold Medal Electrical Pvt Ltd.

S & F Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling complete all as directed. Make cat No. of Laser Ray Neo of M/S Crompton Graves Consumer Electricals Ltd or equivalent in Havells India Ltd. / Surya Roshni Ltd./ (iv) Bajaj / Wipro / M/s Jaquar & Company Pvt. Ltd / ) GE / M/s Simoco Telecommunications(South Asia) Ltd / Goald medal Electricals Pvt Ltd./ Panasonic

S & F Lamp holder insulated body with back plate for batten fittings.with polycarbonate body. Make:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL/ C&S / Standard / Gold Medal Electrical Pvt Ltd.

S&F Sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp ,240 Volt Complete all as specified and as directed by the Engineer-in-charge.

M & L sheet metal enclosure for DBs TPN 4 way double door type with 200amps rated busbar including necessary connection complete.

M & L sheet metal enclosure for DBs 12 way double door type with 200amps rated busbar SPN including necessary connection complete.

M & L for MCB single pole 6 to 32 Amps 240 V 50 Hz 10kA 'C' series complete all as directed.

M & L for MCB single pole & Neutral 6 to 32 Amps 240 V 50 Hz 10kA 'C' series complete all as directed.

M & L for MCB TPN 40 Amps 240 V 50 Hz 10kA 'C' series complete all as directed. Make for item Nos. 26 to 31:- Standard / L&T/ Indo Asian / C&S / Havells / HPL / Legrand./ Hager / Gold Medal Electrical Pvt Ltd.

M & L for sub main wiring with two single core PVC insulated cable with Copper conductor unsheathed cable of size 4 sqmm drawn through and including PVC medium grade pipe with fittings, & including cutting chases in wall with making good the disturbed surfaces with 1:3 cement mortar to match the existing with PVC conduit with 4 sqmm PVC insulated copper wire single core for continuous earthing complete all as directed. Note : Three runs of 4 Sq mm of cable, one run of conduit shall be measured as one unit . Make for cable:- Polycab / Havells India Ltd./ RR Kabel Ltd./ Finolex / Nicco / KEI / Gold Medal Electricals Pvt Ltd. Make for conduit:- Presto Plast / ) Finolex /) Indo American Electricals Ltd / Kalinga Gold / Richa Cable Pvt Ltd :- Plaza / Precision.

M&L earthing complete with galvanised earthy plate electrode 600 x 600 x 6 mm thick burried directly in ground ( earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 meter below normal ground level, the earth plate surrounded by a mixture of charcoal dust and salt to a packed thickness of 150 mm on all sides with and including necessary exacavation earth work returning, filling in and removal of surplus soil upto 50 mtr including GI wire 4 mm dia bolted and revetted to earth plate at one end in and connected to continuous GI earth wire encased in and including 15 mm GI light grade pipe with all fittings from top edge of earth plate complete as specified and as shown in electrical plate no 3

Excavating over areas, n exc 1.5 m deep and getting out in loose/soft soil complete all as specified

Material & Labour for mixiing of Fly ash, Clinker & stone dust in proportion of 1:3:6 ( i .e 10 % Fly ash, 30% Clinker and 60% Stone dust) laying , watering , ramming and compacting with vibratory roller to get as required camber and gradient complete as directed

M&L for Hard core, broken store to gauge n exc 63 mm deposited, spread & levelled in layers n exc 15 cm thick watered and rammed of stone or boulders to a true surface

M&L for 75mm thick plain Cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) in floor, sub base or pavings, finished fair and even, all as specified

M&L 100 mm th cement conc 1:4:8 type D-2 using 40 mm graded aggregate as sub base.

M&L for modular size Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in 1:6 and all as specified and directed.

M&L for sand cushoning / filling as under floors and the like, including watering and consolidation and all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade with gray cement and pigment complete all as specified and directed. Make:- Anjali Tiles / Ultra Tiles Pvt Ltd. / Terra Firma / Ecco Scope \ Mehtab Tiles / Nitco

M&L for Rendering 10mm thick on fair faces of brickwork or concrete surfaces in CM 1:6 complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B0 (using 12.50 mm graded stone aggregate in coping all as specified including all necessary form work complete all as specified and directed.

M&L for 40mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) all as specified and directed

M&L Forming contraction dummy joints 40mm deep x 10 mm wide, filled with sealing compound Grade-A complete all as specified and directed. Make:- STP / Tikitar / Choksy Chemicals.

M&L Steel tublar work including special shaped for Goal posts including fixing arrangement of boards.Fe 410 W Fe 290 Grade -A. Make Tata / Sail / Jindal.

S&F Acrylic backboard 20 mm thick standard size, ordinary type including steel rim with net and fixed to steel frame work as goal post

Excavation in post hole each n exc 0.5 cum getting out, returning , filling in and ramming earth around, in layers n exc 25 cm , watering and removing surplus soil to a distance n exc 50 m and making good surface.

M&L Painting lines, dashes, arrows, circle on PCC Floor n. exc 10 cm width with road marking paint,first quality, white or yellow. Make:- Asian / Berger / Jenson & Nicholson / Shalimar.

surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out loose/soft soil

Cement concrete 1:4:8 type D2 (using 40 mm graded agg) in foundations,filling and mass concrete

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter ®

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surface of conc

Formwork for rough finished surface of conc to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

Formwork for rough finished surface of conc to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L for RCC 1:2:4 type B1 nominal mix (using 20mm graded agg) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L forRCC 1:2:4 type B1 nominal mix (using 20mm graded agg) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L for RCC 1:2:4 type B1 nominal mix (using 20mm graded agg) Beams, cantilevers, bressummers, lintels over 1.5m span

M&L for RCC 1:2:4 type B1 nominal mix (using 20mm graded agg) Columns, pillars, piers, posts and struts

M&L for RCC 1:2:4 type B1 nominal mix (using 20mm graded agg) Chajjas

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookingends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Mild steel TMT bars 5mm dia and over incl 10mm dia, cut tolength, bent to shape required, including cranking, bending spirally for stirrups for columns, hookingends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for preparation of plastered or unplastered surface and applying three coat of white wash on wall. Make for lime (First Quality) :- Birla White / Swastik lime industries / Shree balaji / Hindustan Chemical and lime Industries

M&L for preparation of newly plastered or unplastered surface and applying two coat of cement base paint on external wall. Make:- (i) Jotun India Pvt Ltd./ Snowcem Plus / Berger / Asian Paints (Gutucam / Crimocem Super Cement paints

M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6

M&L for old size brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4

M&L Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 and finish even and smooth withing using extra cement

M&L Rendering 5mm thick on fair faces of concrete surfaces in CM 1:3 and finish even and smooth withing using extra cementon ceiling all as specified and directed

M&L DPC in cement concrete (1:2:4) type B0, 40 mm thick incl necessary form work and Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. mall as specified and directed. Make for bitumene:- STP / Tikitar / Choksy Chemicals.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M&L100 mm th PCC 1:3:6 type C-2 (using 40 mm graded stone) for flooring and rough finighed complete

M&L40 mm th PCC 1:2:4 type B-0 (using 12.5 mm graded stone) for flooring and rough finighed complete

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, infloors etc. set and joint free in neat cement slurry and pointed in white or coloured cement to match and incl 15 mm th Screed bed for laying floor finishes in cm (1:4)

Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and incl 10 mm th screed bed in CM (1:4). Make for item Nos. 73 & 74:- Kajaria Ceramic Ltd./ Asian Granito India Ltd./ Nitco / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H&R Johnson India / Orient Bell Ltd

M&L for 75 mm thick PCC type C1 (1:3:6) using 20mm graded crushed stone aggregate as in plinth protection , finishing cement concrete surfaces even & smooth without using extra cement.

S&F solid PVC Door frame of size 50X47 mm made out of 5 mm plain colour PVC sheet reinfoced with MS tube in opening as pe specification and all as specified and directed

S&F factory made solid PVC door shutter 30 mm thick (Style) consisting of frames made out of MS tubes for top and bottom rails MS frame shall be covered with heat noulded plain colour PVC with solvent cement for tiles and plain colour PVC sheets for top rail and bottom rail panellng of plain colour PVC sheet to be fitted in the MS frame welded sealed to the stiles & rails with suitable PVC sheets beading and jointing together with solvent in the frame at site as per specification and drawing incl all fittings. Make for item Nos. 76 & 77:- M/s Rajshri Plastiwood,/ Kumar Arch Tech Pvt Ltd, M/s Sintex India Ltd,/ HINDOPAN,/ Marino / Polyline.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.

S&F150mm long Aluminium anodised, barrel tower bolts of extruded section.

S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised Make for item Nos. 78 to 80:- Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset..

S&F Tubes 15mm dia, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. Make:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd.

all as per item No. 82 above but 20 mm bore

S&F Stop valves, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. Make:- Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.

S&F Gun-metal, globe or gate valves, 25mm dia with iron wheel head, screwed both ends for iron pipe. Make :- Zoloto / Leader / Uopadhaya / Kirloskar.

S&F fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed with 15 mm bore pipe

S&F Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel 15 mm pipe or union. Make for item Nos. 86 & 87:- Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms). Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd /

PVC (SWR) floor trap 75 mm, plain with grating including jointing with solvent cement

PVC (SWR) gully trap 125/110 mm,setting and jointing with solvant cement

S&F 75mm PVC (SWR) pipe single/double socket in any length with rubber ring joint, laid in trenches or in floor all as specified and directed

S&F 110mm PVC (SWR) pipe single/double socket in any length with rubber ring joint, laid in trenches or in floor all as specified and directed. Make for item Nos. 89 to 92:- (i) Kisan Mouldings Limited / Ori-Plast / Supreme / Prince Finolex / Prayag

S&F PVC water tank 1000ltr capacity, trippled layered, with all necessary fitting like ball valve etc, all as specified and directed. Make:- (i) Sintex / Polycon / Oriplast / Jindal

M&L for Cutting into existing manholes for connecting new drains, making good to 100mm dia pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required

Steel ventilator with top hung shutter including hinges, steel peg stay, etc complete. Make:- M/s Modern Fabricators, 23E , Radha Madhab Dutta Garden Lane, Kolkata -10./M/s BA Enterprises, south Stn Road, Agarpara (Salpatabagan), Kolkata – 109. /M/s Sen Harvic, Vora Building, 1st Floor, 50 Nakhoda Street Bombay. /M/s Multiwyn Industrial corporation 3-B, Camac Street, Kolkata – 16 /M/s Agew Steel Manufactures PVT Ltv 522/1, Outside Pachkuva, ahmedabad – 380002 /M/s Doorwyn Industries, 55 Dharmatala Road, Salkia, Howrah ( WB) /M/s Hopes Metal Industries Ltd., P-23 Transport Depot Road , Kolkata – 27 /M/s Ankur Industries, 726 Andul Road (Podra), P.O. Denesh sheikh Lane, Howrah – 711109./M/s Steel Engineers, 203 KabigururabindraNath, Kanchrapara , 24 Parganas(N) WB /M/s NCL Altek and Seccolour Ltd, Hyderabad /M/s Bihar Boddin&Engg work, Katihar (Bihar) / M/S GS Udyog / BA Industries.

3mm thick figured glass, pin headed type and glazing with oil putty in square n.exc 0.5sqm in each pane, etc complete. Make:- Prayag / Zircon / Saint Gobin / Cera / Modiguard / Pilkington Glass work / Triveni.

M&L for APP based polymeric membrane minimum wt 3 kg/sqm and min 3 mm th reinforced with polysister non oven fabric(wt not less than 150 gms)laid on primed surface by torch application complete all as specified. Make:- STP / Fosroc / Pedilite / Sika.

M & L for ceiling rose, PVC / Polycarbonate three terminals complete all as directed. Make for item Nos. 98 & 99:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL/ C&S / Standard / Gold medai Electrical Pvt Ltd.

S & F 01x 9W LED fittings decorative Regal batten for LED tube with tube 9 watt lighting fixture with extruded polycarbonate complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as directed. Make : Havells Cat No. LHEXBTP7UN1W009 or equivalent in Bajaj/ / CG / Gold medai Electrical Pvt Ltd.

S & F of Exhaust fan 300/250 mm Sweep with louver shutters,Plastic exhaust fan AC 230V, 50 Hz comlete with fixing arrangement and connection. Make : HAVELLS, model- Ventil Air-DXR/ CG/ Bajaj /

Supply and fix 30W LED 6000K for roadway luminaire. Including GI pipe 1.00 mtr long, (light grade) bracket 32 mm bore of required size and length, including necessary connection from ceiling rose with 3 core .75 sqmm pvc insulated round copper cable fixed with suitable size clamp and nut bolt. Make :- Cat No. LSTS-30-CDL-M of make M/S Crompton Graves Consumer Electricals Ltd / or equivalent in Havells India Ltd. / Surya Roshni Ltd./ (iv) Bajaj / Wipro / M/s Jaquar & Company Pvt. Ltd / ) GE / M/s Simoco Telecommunications(South Asia) Ltd / Goald medal Electricals Pvt Ltd./ Panasonic.

M & L sheet metal enclosure for DBs 8 way double door type with 200amps rated busbar SPN including necessary connection complete. Make:- Legrand / L&T / Siemens / ) ABB / GE / Schnieder / Indo Asian (Brand :-OPTI POWER) / ) Havells India Ltd/ Gold Medal Electricals Pvt Ltd.

M&L for cable in trenches or passing through pipe, XLPE insulated,aluminium conductor, heavy duty, galvanised steel strip or wire armoured electric LT cable for 1100 Volts grade cross Sectional area 10 Sqmm 2 Core. Make:- Polycab / Havells India Ltd./ Gloster Cables Ltd. /KEI Industries Ltd / ASIAN Cable / ) Finolex / RR Kabel Ltd / Gold Medal electricals PVT Ltd.

S&F Galvanised Iron Pipe 25 mm bore (dia),Medium grade as in cable protection with wall ,under road crossingetc , complete all as specified and as directed.

M&L stop Valve , GM Gate valve, screwed , complete to iron pipe including fittings etc complete. , for size 40 mm dia pipe. Make:- Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.

M/L brass Ferrul , conform to IS – 10942-2000.for the existing main water supply pipe line 100 mm bore CI /DI line for branch connection of the internal dia 25 mm , including fittings as required, etc complete. Make:-Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd.

M&L for brick masonry valve pit with brick in CM (1:6) with 100mm thick PCC work 1:3:6 type C2 from foundation over 75mm thick hard core, sub class B brick full brick thick wall, 15mm thick internal and external plaster at bottom of the pit of size 600x600x600 mm along with valve pit cover made out MS angle iron 50mm x 50mm x 6mm frame work, , MS plate cover made out of 3.15mm thick with locking arrangement fixed over the valve pit including a coat of synthetic enamel paint over a coat of red oxide primer complete including necessary frame work welding, drilling etc

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

ROY ENTERPRISE

M/S Ali Trading Co

Hooghly Construction Co.

S S ENTERPRISE

M/s Raj Kumar Chopra