Loading
Loading…
Loading…
Tender Value
₹3.1 Cr
EMD Value
₹3.1 L
Closing Date
8 Jan 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
GEN
15 conditions · 4 needing a document upload
Financial Eligibility Criteria: In case tender value Rs. 50 lakhs or more, The tenderer must have minimum average annual contractual turnover of V/N or 'V" whichever is less; where V= Advertised value of the tender in crores of Rupees= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VI B, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet tenderer first read the Para 10 of GCC carefully and Advance Correction GCC2022.
Eligibility Criteria means any contract which have satisfactorily executed & completed by the tenderer, which are mentioned as below as similar nature of works. As regards the similar works, the tenderer should have satisfactorily executed Work of 1.Electrification of Service building. 2.Electrification of Staff quarters. 3.Electrification of offices. 4.Electrification of road and colony lighting 5.Electrification of circulating area lighting 6.Erection and commissioning of LT, HT up to 33 KV overhead lines. 7.Substation installation and commissioning. 8.Electrification of washing pit, sheds & workshops etc. 9.Comprehensive/semi comprehensive maintenance of service building or staff quarters or sub stations or DG set or lifts. 10.Annual electrical maintenance contract of train lighting and/or air conditioning coaches excluding RMPU units of AC coaches. 11.Any above work or combination of (1) to (10) above. Tenderers should submit documentary proof in regards to fulfilling these eligibility criteria along with their offer. In case of any ambiguity, the decision of Chief Electrical Engineer in regards to classification of work will be final.
For participating in tenders for an electrical nature of work, the contractor shall have to possess valid electrical license of appropriate voltage issued by any State Government under Clause 45 of Compilation of Rule of Indian Electricity Rules 1956 or as amended from time to time. Electrical works of 11KV and above including OHE, 'A' class Electrical Contractor license is essential. 2. The license can be possessed with one of the partners or in his own name if sole proprietor. Firm should submit a self-attested copy of the Electrical Contractor License along with the offer; otherwise the offer will be summarily rejected.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or(ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or(iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.(b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or(ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or(iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.(b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. IN case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Tenderer first read the Para 10 of GCC carefully and Advance Correction GCC2022.
17 conditions · 1 needing a document upload
Tenderers are requested to submit their offers as per GST Tax regime. All the tenderers should ensure that they are GST compliant and their quoted tax structures/rates are as per GST law.
Conditions regarding inclusion of "Letter of credit" as mode of payment attached as "Annexure LC". As per Rly Bd Letter No. 2018/CE-I/CT/9 dt. 04.06.2018, special condition of LC has been applied. The contractor shall have the option to take payment from Railway through a letter of credit (LC) arrangement for all the tender having advertise cost of Rs. 10 Lakh or above
The above option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter during execution of contract.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Latest GCC has been introduced and published / available on railway's website. The provisions of GCC will be applicable on all tenders published here after. Tenderers are requested to download the same from the railways website and ensure the implementation of the latest provisions made in GCC, while execution of work.
Contractor is to abide by the provisions of Payment of Wages act & Minimum Wages act in terms of clause 54 and 55 of Indian Railways General Condition of Contract ( copy uploaded and attached with this tender). In order to ensure the same, an application has been developed and hosted on website 'www.shramikkalyan.indianrailways.gov.in'. Contractor shall register his firm/company etc. And upload requisite details of labour and their payment in this portal. These details shall be available in public domain. The Registration/ updation of Portal shall be done as par clause 55 C (i) of Indian Railways General Condition of Contract.
While processing payment of any 'On Account Bill' or 'Final Bill' or release of 'Advances' or 'Performance Guarantee / Security deposit', contractor shall submit a certificate to the Engineer or Engineer's representatives that "I have uploaded the correct details of contract labours engaged in connection with this contract and payments made to them during the wage period in Railway's Shramikkalyan portal at 'www.shramikkalyan.indianrailways.gov.in' till ____ Month, _____Year."
Part(A): Capacity Augmentation of Diesel Loco Shed Itarsi for homing 200 WAG-9 locomotive. (Electrical work) Part(B): Itarsi - Electrical works in relation with shifting of FOB for upgradation of station passenger amenities. (Electrical work)
ELECT-GEN-BPL-T-63-2025~WCR
ELECT-GEN-BPL-T-63-2025
Open
Works - General
6 Months
Bhopal, Madhya Pradesh
₹0
₹3.1 L
8 Jan 2026
17 Dec 2025
25 Dec 2025
230 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,18,57,709.4 | ||
| details. | Breakup for | — | — | ||
| Supply, erection, installation, connection, testing and commissioning of Concealed type point wiring with copper wire, PVC conduit pipe, modular switch, sockets, regulator, board plate, wire, pipe, etc. complete, wiring in PVC pipe 25 mm dia (medium) 1.6 mm to 1.8 mm thickness approx. with 1.5sq mm to 4.0 sqmm PVC insulated single core multistrand copper cable confirming to IS:694- 1990 or latest with one holder /ceiling rose on junction box with round plate with 2.5 sq mm PVC insulated copper wire green color for earthing along with connection etc. as per wiring specification attached. Make: For wire - HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. For pipe - POLYCAB, FINOLEX, SHREENATH,PRESS FIT or equivalent. For switches - HAVELLES, L&T, Anchor, C&S, LEGRAND or equivalent. | — | — | — | 5,67,266.4 | |
| details. | Breakup for | — | — | ||
| Supply, fixing, testing & commissioning of 2.5 sq.mm single core multistrand copper conductor for main/submain wiring conforming to IS:694-1990 or latest as per specification attached. Make- HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. | — | — | — | 1,25,860 | |
| details. | Breakup for | — | — | ||
| Supply, fixing, testing & commissioning of 4.0 sq.mm single core multistrand copper conductor for main/submain wiring conforming to IS:694-1990 or latest as per specification attached. Make- HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. | — | — | — | 89,600 | |
| details. | Breakup for | — | — | ||
| Supply & fixing of 25 mm PVC pipe casing & capping for submain/main wiring with all accessories as per wiring specification attached. Make -POLYCAB, FINOLEX, SHREENATH, PRESS FIT or equivalent. | — | — | — | 55,730 | |
| details. | Breakup for | — | — | ||
| Supply, laying, fixing, testing and commissioning of MS fan boxes with hook arrangement and painted with red oxide for concealed wiring as per site requirement and as per technical specification attached. | — | — | — | 875.52 | |
| — | 230.00 | — | — | ||
| Supply and fixing of flush metal box with 6 module complete as per technical specification attached. | — | — | — | 40,489.2 | |
| — | 230.00 | — | — | ||
| Supply and fixing of plate inner and outer with 6 module complete as per technical specification attached. | — | — | — | 80,674.8 | |
| — | 100.00 | — | — | ||
| Supply and fixing of flush metal box with 3 module complete as per technical specification attached. | — | — | — | 7,364 | |
| — | 100.00 | — | — | ||
| Supply and fixing of plate inner and outer with 3 module complete as per technical specification attached. | — | — | — | 11,468 | |
| details. | Breakup for | — | — | ||
| Supply, installation, connecting, testing and commissioning of 20 watts Indoor LED tube, IP20 protection complete with other accessories such as clamps, bracket, square block etc. Make- PHILIPS, WIPRO, OSRAM, Jaquar, Havells or equivalent. | — | — | — | 1,95,350 | |
| — | 6.00 | — | — | ||
| Supply, wiring, fixing, connection, testing, and commissioning of Outdoor type MDB LT Panel hut shaped canopy type 16 SWG (1.626 mm min.) MDB front opening double door type on brick masonry foundation with 1x125A 16 KA 4 pole MCCB as Incoming, outgoing 1x100A 16KA TP MCCB, 2x63A 16KA TPN MCCB, 1x32A TPN MCB, 1x16A SPN MCB, ML-2 Contactor with 01 no. Timer, aluminum bas bar, LED Indication Lamp RYB, with 01 no. Three phase CT energy meter connected to incoming supply & electronic multifunction meter (Vifpe) as per railway specification attached. Make: For MCB's - L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. For meters - SIEMENS, RESHAB, HAGER, SELEC or equivalent. | — | — | — | 3,99,247.14 | |
| details. | Breakup for | — | — | ||
| supply installation, connecting, testing and commissioning of out door type LT panel 16 SWG (1.626 mm min.) with 1x100 A FP MCCB as incomer, 4x63A TP MCCB, 3x40A P MCB & 4x16A SP MCB along with CT operated Energy Meter, meters for voltage, current, frequency, PF, 3 phase indicating lamps LED cluster type for phase indication, copper bus bars, insulation sheet, neutral link connectors, copper bus bar etc. enclosed in MS sheet enclosure. It also includes the proper fixing of the panel on MS Channel with suitable fixtures, clamps, nut & bolts etc. Make: For MCB's - L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. For meters - SIEMENS, RESHAB, HAGER, SELEC or equivalent. | — | — | — | 18,75,974.7 | |
| details. | Breakup for | — | — | ||
| Supply, installation, testing, commissioning of 380 mm sweep all Metal body construction industrial type heavy duty exhaust fan, propeller type, single phase, 1400 RPM complete with all standard accessories including civil works of opening in the wall and finishing the same after work with minimum warranty of one year or more as per the manufacturer as per approved list as per technical specifications attached. Make- BAJAJ, ORIENT, USHA or equivalent. | — | — | — | 79,192 | |
| details. | Breakup for | — | — | ||
| Supply, installation, connecting, testing and commissioning GI pipe earthing arrangement complete as-per specification attached with earth pit and connection strip | — | — | — | 4,63,976.8 | |
| details. | Breakup for | — | — | ||
| Description: Supply, erection, connection, testing and commissioning of 8 SWG GI wire as per technical specification attached | — | — | — | 25,822.5 | |
| details. | Breakup for | — | — | ||
| Laying, erection, connection and testing of PVC Aluminum armored cable in the following manner and as per railways specification attached. (Note: Cable will be supplied by Railway at concerned depot.) | — | — | — | 1,06,600.5 | |
| — | 3.00 | — | — | ||
| Supply, fixing, connection, testing and commissioning of Indoor type MDB LT Panel 16 SWG (1.626 mm min.) MS Sheet enclosure, fixing of panel on MS Channel with suitable fixture with 2x630A ACB as Incoming, 2x400A 50KA FP MCCB, 2x100A 16KA FP MCCB, 2x63A TPN MCB, 01 no.Separate three phase energy meter, LED Indication Lamp RYB, 02 no. Threephase CT energy meter connected to incoming supply & electronic multifunction meter (Vifpe) as per railway specification attached. Make: For MCB's - L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. For meters - SIEMENS, RESHAB, HAGER, SELEC or equivalent. | — | — | — | 21,69,462.81 | |
| — | 2.00 | — | — | ||
| Supply, erection, connecting and testing of onload changeover switch 800 Amp. Make: L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 1,16,989.92 | |
| details. | Breakup for | — | — | ||
| Design, supply, installation, connecting , testing and commissioning of LT panel comprising of 2x800A, D/O Manultype,4 pole, Air Circuit Breaker, Microprocessor operated draw out type breaker equipped with 6N0+6NCAuxiliary contacts with thermal magnetic release and all Standard accessories. 2xDoor interlock kit for above ACB, earth fault relay, 2xCT 800/5A and 3xCT 400/5A Ammeter with selector switch,2xVoltmeterwith selector switch , 2 set LED pilot (complete assly) R,Y and B ,1x1000A On load change over switch, Copper bus bars to cater load of 2000A, 6x400A MCCB 50KA, 4X400A MCCB 35KA for current rating of 325A, 3X200A MCCB 35KA, 3X100A MCCB 35KA (microprocessor based 4 pole MCCB) 5 nos. energy meter (3 phase 4wire system) with CT operated, 800/5A, 400/5A, MS sheet enclosure to accommodate the above switchgear as per railway specification attached. Make: For MCB's - L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. For meters - SIEMENS, RESHAB, HAGER, SELEC or equivalent. | — | — | — | 8,46,866.67 | |
| details. | Breakup for | — | — | ||
| Supply, erection, connecting and testing of new bus bar with 10 sq.mm multi strand copper wire under the cover over platform complete with shackle insulator, spacer, heavy gauge GI Pipe MS flat clamps etc./Casing Caping 50mmx20mm or PVC pipe 50mm as per site requirement, for various circuits as per wiring specification attached. Make- HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. | — | — | — | 3,32,520 | |
| details. | Breakup for | — | — | ||
| Supply, erection, connection, testing and commissioning of point wiring with copper wire of 1100V grade size 1.5to 4 sq.mm & 2.5 mm green colour earth wire using casing capping & pvc pipe wiring with modular switch socket board(included), PVC pipe complete with all necessary accessories as per wiring specification attached. Make: For wire - HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. For pipe - POLYCAB, FINOLEX, SHREENATH, PRESS FIT or equivalent. For switches - HAVELLES, L&T, Anchor, C&S, LEGRAND or equivalent. | — | — | — | 3,42,978.96 | |
| details. | Breakup for | — | — | ||
| Supply & fixing of 25 mm PVC pipe casing & capping for submain/main wiring with all accessories as per wiring specification attached. Make -POLYCAB, FINOLEX, SHREENATH, PRESS FIT or equivalent. | — | — | — | 8,359.5 | |
| details. | Breakup for | — | — | ||
| Supply & fixing of 32 mm PVC casing & capping for submain/main wiring with all accessories as per wiring specification attached. Make - POLYCAB, FINOLEX, SHREENATH, PRESS FIT or equivalent. | — | — | — | 21,960 | |
| details. | Breakup for | — | — | ||
| Supply and installation of 50 mm Casing and capping, as per Railway's technical specifications attached. Make -POLYCAB, FINOLEX, SHREENATH, PRESS FIT or equivalent. | — | — | — | 34,496 | |
| — | 40.00 | — | — | ||
| Supply, Installation, Connecting ,Testing and commissioning of double door 12-Way, Sub Distribution Board (SDB) with neutral link 1 x 32A TPN MCB as incoming and 4 X 16A SP MCB, 4 X 10A SP MCBs as outgoing as per Railway's technical specifications attached. Make - L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 1,12,224 | |
| details. | Breakup for | — | — | ||
| Supply , fixing, testing & commissioning of 2.5 sq.mm single core multistrand copper conductor as per specification attached. Make- HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. | — | — | — | 89,900 | |
| details. | Breakup for | — | — | ||
| Supply , fixing, testing & commissioning of 4.0 sq.mm single core multistrand copper conductor as per specification attached. Make- HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. | — | — | — | 73,472 | |
| details. | Breakup for | — | — | ||
| Supply , fixing, testing & commissioning of 6.0 sq.mm single core multistrand copper conductor as per specification attached. Make- HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. | — | — | — | 1,12,896 | |
| — | 40.00 | — | — | ||
| Supply, erection, connection, testing and commissioning of metal clad switch socket with 20A SP MCB as per wiring specification attached. The wiring shall be carried out with 4 sqmm PVC insulated copper conductor & 2.5 sq mm PVC insulated copper wire green color for earthing as per Railway's technical specifications attached. Make: For wire - HAVELLES,KEI, FINOLEX, POLYCAB or equivalent. For switch socket with MCB - L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 24,562.4 | |
| details. | Breakup for | — | — | ||
| Supply & erection of vertical distribution board in MS enclosure complete with double door, busbar, earth bus, neutral link with 1x100A FP 16KA MCCB as incomer and 2x32A TP MCB, 8X32A SP MCB,10X16A SP MCB for outgoing as per technical specification attached. Make - L&T, SIEMENS, LEGRAND or equivalent. | — | — | — | 1,59,271.5 | |
| details. | Breakup for | — | — | ||
| Provision of LED light fitting in industrial shed and under examination pit with suitable clamps, fixtures, nut, bolts etc. for fixing the fitting and fixing of GI pipe on the truss with proper clamping arrangement for power supply arrangement. It also includes power supply connection to the fitting & its testing & commissioning - Supply, erection, fixing, connecting, testing & commissioning of 150 watts LED fitting with PC IP66 or latest rating complete in all respect and fixing by means of PVC conduit pipe and ceiling rose with suitable MS clamps, nut-bolts, anchor fasteners etc. as per site requirements. Make-PHILIPS, WIPRO, OSRAM, Jaquar, Havells or equivalent. | — | — | — | 11,96,690 | |
| — | 40.00 | — | — | ||
| Provision of LED light fitting in industrial shed and under examination pit with suitable clamps, fixtures, nut, bolts etc. for fixing the fitting and fixing of GI pipe on the truss with proper clamping arrangement for power supply arrangement. It also includes power supply connection to the fitting & its testing & commissioning - Supply of 150 watts LED fitting complete in all respect and fixing by means of PVC conduit pipe and ceiling rose as per Railways specification attached. Make- PHILIPS, WIPRO, OSRAM, Jaquar, Havells or equivalent. | — | — | — | 3,95,600 | |
| details. | Breakup for | — | — | ||
| Supply, erection, fixing, testing & commissioning of 100W LED light fitting in industrial shed with IP66 or latest rating with suitable clamps, fixtures, nut, bolts etc. for fixing the fitting and fixing of GI pipe on the truss with proper clamping arrangement for power supply arrangement as per railway specification attached. Make-PHILIPS, WIPRO, OSRAM, Jaquar, Havells or equivalent. | — | — | — | 8,21,861.7 | |
| — | 38.00 | — | — | ||
| Supply of 100 W LED light fitting in industrial shed with suitable clamps, fixtures, nut, bolts etc. for fixing the fitting and fixing of GI pipe on the truss with proper clamping arrangement for power supply arrangement as per railway specification attached. Make-PHILIPS, WIPRO, OSRAM, Jaquar, Havells or equivalent. | — | — | — | 2,71,636.92 | |
| details. | Breakup for | — | — | ||
| Supply, fixing, wiring, connecting, testing and commissioning of 50 Watt LED Luminaire in industrial shed for Flood Light of IP66 rating complete with suitable MS clamps, nut- bolts, anchor fasteners etc. as per Railway specifications attached. Make-PHILIPS, WIPRO, OSRAM, Jaquar, Havells or equivalent. | — | — | — | 2,14,500 | |
| — | 20.00 | — | — | ||
| Supply of 50 Watt LED Luminaire in industrial shed for Flood Light of IP66 rating complete with suitable MS clamps, nut-bolts, anchor fasteners etc. as per Railway specifications attached. Make-PHILIPS, WIPRO, OSRAM, Jaquar, Havells or equivalent. | — | — | — | 65,000 | |
| details. | Breakup for | — | — | ||
| Supply, installation, connecting, testing and commissioning of Outdoor type MDB LT Panel hut shaped canopy type 16 SWG MDB front opening double door type on brick masonry foundation with, 1x400A 50KA TPN MCCB + 2x250A 25KA TPN MCCB, +2x100A 16KA TPN MCCB, with suitable 3-phase CT, insulation sheet, neutral link connector, copper bus bar for above mentioned MCCB/MCBs and suitable Din channel arrangement for outgoing MCCBs/MCBs, along with Panel mounted electronic display digital multifunctional VIFPE EMFIS meter for voltage ,ampere, frequency, power factor and energy unit in KWH, three colour RYB LED indicators with suitable base arrangement of proper size and quality on cement concrete foundation etc. and other accessories as per Railway specifications attached. It also includes the proper fixing of the panel with suitable fixtures, clamps, nut and bolts etc. as per railway specification attached. Make: For MCB's - L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. For meters - SIEMENS, RESHAB, HAGER, SELEC or equivalent. | — | — | — | 2,39,396.4 | |
| details. | Breakup for | — | — | ||
| Design, Supply, replacement, Installation, Connection, Testing and commissioning of Outdoor type LT panel complete with all connected accessories etc. as per Railway specifications attached. The LT panel with 1 X 250A FP MCCB as incomer, 4 X160A TP MCCB, 4x100A TP MCCB along with CT operated Energy Meter, meters for voltage, current, frequency, PF, 3 phase indicating lamps LED cluster type for phase indication, copper bus bars, insulation sheet, neutral link connectors, copper bus bar etc. enclosed in MS sheet enclosure. Make: For MCB's - L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. For meters - SIEMENS, RESHAB, HAGER, SELEC or equivalent. | — | — | — | 11,57,720.28 | |
| details. | Breakup for | — | — | ||
| Supply, installation, connecting, testing and commissioning of digital timer switch 16A capacity, complete with associated accessories & enclosure. Make- L&T, SIEMENS, LEGRAND or equivalent. | — | — | — | 50,785.4 | |
| details. | Breakup for | — | — | ||
| Supply, installation , testing and commissioning of 3 pole power contactor type of suitable capacity as per timer above. Make- L&T, SIEMENS, LEGRAND or equivalent. | — | — | — | 75,355 | |
| details. | Breakup for | — | — | ||
| Supply, erection, testing & commissioning of Air circulator fan of 750 mm sweep wall mounting type without regulator suitable for single phase, 230V and fixtures, clamps, nuts and bolts etc. including civil works of fixing the fan and finishing the same. Make-BAJAJ, ORIENT, USHA or equivalent. | — | — | — | 9,53,673 | |
| details. | Breakup for | — | — | ||
| Supply, installation, connecting, testing and commissioning of Air circulator Fan 450 mm with bracket, claims, connector with fixture. Make-BAJAJ, ORIENT, USHA or equivalent. | — | — | — | 2,81,160 | |
| — | 500.00 | — | — | ||
| Laying, erection, connection and testing of PVC Aluminum armoured cable in the following manner and as per railways specification attached. (Note: Cable will be supplied by Railway at concerned depot.) - Laying on truss/on pole/on Wall/Tray | — | — | — | 29,040 | |
| details. | Breakup for | — | — | ||
| Supply of material and digging of trench in concrete area 30cms deep and 30 cms wide and laying of pipe or cable. The Contractor has to replaster the surface /floor with cement concrete etc. ( All the material will be supplied by the contractor) as per Railway specifications attached. | — | — | — | 33,981.5 | |
| details. | Breakup for | — | — | ||
| Supply & laying of DWC HPDE pipe of 160mm dia. along with all required material for joining the pipes. | — | — | — | 2,32,561 | |
| — | 350.00 | — | — | ||
| Laying, erection, connection and testing of PVC Aluminum armoured cable in the following manner and as per railways specification attached. (Note: Cable will be supplied by Railway at concerned depot.) - Cable laying inside the DWC HPDE pipe. | — | — | — | 12,470.5 | |
| — | 250.00 | — | — | ||
| Supply & erecting Hot dipped Galvanized Perforated type Cable tray manufactured from 16 SWG (1.6 thick) GI sheet 400 mm width & 75 mm height complete along with GI sheet cover to fix on the cable tray of reputed make with necessary coupler plates & hardware. The thickness of the cable tray should be of 1.6mm and1.2mm for cable tray cover. The cable tray should be fixed upon the wall/pillar /gantries etc. and similar other places with proper clamps, fixtures etc. asper the direction of Railway site Engineer. the cable tray cover should be fixed with proper clamps, fixtures, nuts& bolts etc. as per site requirement. | — | — | — | 1,92,845 | |
| — | 250.00 | — | — | ||
| Supply, installation, fixing and commissioning of 150mm wide, 50 mm deep powder coated Mild steel cable tray with cover fixed on wall/ Ceiling by means of MS angle frame & anchor fasteners and laying cable therein. The thickness of the cable tray should be of 1.6mm and 1.2mm for cable tray cover. The cable tray should be fixed upon the wall/ pillar /gantries etc. and similar other places with proper clamps, fixtures etc. asper the direction of Railway site Engineer. The cable tray cover should be fixed with proper clamps, fixtures, nuts & bolts etc. as per site requirement. | — | — | — | 1,10,930 | |
| details. | Breakup for | — | — | ||
| Laying, erection, connection and testing of PVC Aluminum armoured cable in the following manner and as per railways specification attached. (Note: Cable will be supplied by Railway at concerned depot.) | — | — | — | 4,96,658 | |
| — | 75.00 | — | — | ||
| Supply, erection, connection, testing and commissioning of Concealed point wiring with copper wire with PVC conduit pipe and flush metal box with plate inner and outer, switch, socket as per wiring specification attached. FL tube/ ODFT/ Ceiling fan/ Exhaust fan and fitting wiring in PVC pipe 25 mm dia (medium) 1.6 mm to 1.8 mm thickness approx. with 1.5 sq mm PVC insulated single core multistrand copper cable confirming to IS:694- 1990 or latest with one holder /ceiling rose on junction box with round plate with 2.5 sq mm PVC insulated copper wire green colour for earthing along with connection etc. as per Railways wiring specification): Light Point(Concealed wiring for under pit) Make: For wire - HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. For pipe - POLYCAB, FINOLEX, SHREENATH, PRESS FIT or equivalent. For switches - HAVELLES, L&T, Anchor, C&S, LEGRAND or equivalent. | — | — | — | 39,333.75 | |
| details. | Breakup for | — | — | ||
| Supply, fixing, wiring, connecting, testing and commissioning of 70 Watt LED Luminaire for Flood Light of IP66 rating complete with suitable MS clamps, nut-bolts, anchor fasteners etc. as per Railway specifications attached. Make- PHILIPS, WIPRO, OSRAM, Jaquar, Havells or equivalent. | — | — | — | 2,92,600 | |
| — | 25.00 | — | — | ||
| Supply of 70 Watt LED Luminaire for Flood Light of IP66 rating complete with suitable MS clamps, nut-bolts, anchor fasteners etc. as per Railway specifications attached. Make- PHILIPS, WIPRO, OSRAM, Jaquar, Havells or equivalent. | — | — | — | 95,000 | |
| details. | Breakup for | — | — | ||
| Special point wiring for Highbay/Mid bay light fitting in Industrial shed - Supply of material and wiring of light point in 25 mm dia steel conduit and 4 sq.mm. Copper wire PVC cable along with ceiling rose and junction box for making wiring point of high bay light fitting in the industrial shed . Wiring will have 14 SWG copper earth wire along with the wire. Separate phase & neutral wire shall run for wiring purpose. Make: For wire - HAVELLES, KEI, FINOLEX, POLYCAB or equivalent. For pipe - POLYCAB, FINOLEX, SHREENATH, PRESS FIT or equivalent. For switches - HAVELLES, L&T, Anchor, C&S, LEGRAND or equivalent. | — | — | — | 1,83,451.8 | |
| details. | Breakup for | — | — | ||
| Supply, installation, connecting, testing and commissioning of outdoor type 100 WLED High Bay Lighting for ceiling suspension type Luminaire System Wattage (in Watts) 100, LED chip Efficacy (Lumen/watt) 130, Metallic adjustable Brackets with Eye Bolt, Operating input voltage range(in Volts) -00 to 280, Lamp housing (single piece housing)- Pressure die cast aluminum alloy, Material of Lamp (Luminaire) cover- Heat Resistant Toughened Glass, Material of all fasteners- Stainless Steel, Weather proof gasket, Optic Lens, Polycarbonate- UV stabilized, Type of LED -SMD LED Chip ( surface Mounting Device), Metallic adjustable Brackets (Stainless steel),SS Eye Bolts (as per IS:4190:1984 latest), Set of Bolt, UT, Washers (SS), Die cast aluminum brackets as per specification attached. Make-PHILIPS, WIPRO, OSRAM, Jaquar, Havells or equivalent. | — | — | — | 5,91,183 | |
| — | 20.00 | — | — | ||
| Supply of outdoor type 100 W LED High Bay Lighting for ceiling suspension type Luminaire System Wattage(in Watts) 100, LED chip Efficacy (Lumen/watt) 130, Metallic adjustable Brackets with Eye Bolt, Operating input voltage range(in Volts) -00 to 280, Lamp housing (single piece housing)-Pressure die cast aluminum alloy, Material of Lamp(Luminaire) cover- Heat Resistant Toughened Glass, Material of all fasteners-Stainless Steel, Weather proof gasket, Optic Lens, Polycarbonate-UV stabilized, Type of LED -SMD LED Chip ( surface Mounting Device), Metallic adjustable Brackets (Stainless steel),SS Eye Bolts (as perIS:4190:1984latest),Set of Bolt, UT, Washers (SS), Die cast aluminum brackets as per specification attached. Make-PHILIPS, WIPRO, OSRAM, Jaquar, Havells or equivalent. | — | — | — | 1,79,146.4 | |
| details. | Breakup for | — | — | ||
| Supply & fixing of 25 mm PVC casing & capping for submain/main wiring with all accessories as per wiring specification attached. Make -POLYCAB, FINOLEX, SHREENATH, PRESS FIT or equivalent. | — | — | — | 13,375.2 | |
| details. | Breakup for | — | — | ||
| Supply, installation, connecting, testing and commissioning of 12 ways double door SDB comprising 1x32 A TPN C series MCB as incoming and 8x16 A SP C series MCBs as outgoing , as per Tech specification attached. Make - L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 70,207.11 | |
| details. | Breakup for | — | — | ||
| Supply, fixing, connection, testing & commissioning of 1 Phase 25 Amp DP RCCB 30mA breaking capacity. Make - L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 31,525.26 | |
| — | 7.00 | — | — | ||
| Supply, wiring, fixing ,connection, testing and commissioning of Outdoor type MDB LT Panel hut shaped canopy type 16 SWG MS sheet MDB front opening double door type on brick masonry foundation with1x200A 4 pole MCCB 25 kA as Incoming, outgoing 1x160A TPMCCB 25KA , 2x100A TP MCCB16KA, 2x63A TPN MCB 16KA ,ML-2 type Contactor with 01 no. Timer, aluminum bus bar, LED Indication Lamp RYB, with 01 no. Three phase CT operated energy meter connected to incoming supply & electronic multifunction meters as per railway specification attached. Make: For MCB's - L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. For meters - SIEMENS, RESHAB, HAGER, SELEC or equivalent. | — | — | — | 6,31,956.08 | |
| details. | Breakup for | — | — | ||
| Design, Fabrication, supply of complete material for fabrication, erection, testing, commissioning and fixing of LT panel/MDB as per Rly technical data LT panel with - 1x400 Amp FP MCCB with 36 KA as breaking capacity as incomer and 5x200 Amps FP MCCB having breaking capacity of 25 KA & appropriate thermal release range, 3X100A FP MCCB with breaking capacity of 16 KA & appropriate thermal release range, insulation sheet, neutral link connectors, din rail copper busbar etc. in MS sheet enclosure. It also includes CT's, LED type indication lamps for 3 phase power supply, ammeter & voltmeter along with selector switch as per railway specification attached. Make: For MCB's - L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. For meters - SIEMENS, RESHAB, HAGER, SELEC or equivalent. | — | — | — | 10,82,270.49 | |
| — | 1.00 | — | — | ||
| Dismantling, shifting and re-installation of existing 16 meter High mast tower including rope wire complete with foundation, head frame, carriage lantern along with light fitting, power tool, control panel etc. along with 2 nos. of neon aviation light as per technical specifications attached. | — | — | — | 52,347.96 | |
| — | 18.00 | — | — | ||
| Supply, wiring, fixing ,connection, testing and commissioning of Outdoor type MDB LT Panel hut shaped canopy type 16 SWG (1.626 mm min.) MDB front opening double door type on brick masonary foundation with 1x63A TPNMCB as Incoming, outgoing 2x32A SPN MCB, 2x16ASPN MCB,6X16A SP MCB, aluminium busbar, LED Indication Lamp RYB, with electronic multifunction meter (Vifpe) as per railway specification attached. Make: For MCB's - L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. For meters - SIEMENS, RESHAB, HAGER, SELEC or equivalent. | — | — | — | 5,17,206.6 | |
| details. | Breakup for | — | — | ||
| Supply, erection, connection, testing and commissioning of complete material for installing and erection of high mast tower 16 mtr. height (12 nos. of 160 w LED fitting), complete with foundation, head frame, carriage lantern along with light fitting, power tool, control panel etc. along with 2 nos. of neon aviation light as per technical specifications attached. Make- BAJAJ, PHILIPS, CROMPTON or equivalent. | — | — | — | 13,95,943.6 | |
| details. | Breakup for | — | — | ||
| Supply, fabrication cutting & fixing of MS channel /MS angle of required dimensions as per site requirement with nuts and bolts of suitable size, its drilling , cutting, fabrication, welding etc. shall be done if required as per site condition. The cost of erection includes the fixing of MS channel with suitable clamps, nuts & bolts etc. for mounting of equipment's on the pole structure/wall/RCC structure etc. | — | — | — | 25,494 | |
| details. | Breakup for | — | — | ||
| Supply, erection, testing & commissioning of outdoor type Double break central rotating type 33kV /1250 Amp Air break Isolator with earth blade, post type insulator for each phase, hot dip galvanized operating pipe along with required hardware & pad lock arrangement etc. complete in all respect It also includes erection of AB switch with channels, Jumpers, Pin/disc insulator, and equivalent to AAC Conductor and connection through P.G. Clamps on Pole structures. The necessary connection on both side of equipment shall be done as per site supervision. | — | — | — | 1,95,224.18 | |
| details. | Breakup for | — | — | ||
| Supply of complete material for Installation, testing, connecting & commissioning of 33KV, 200A, gang operated air break switch with earthing arrangement twin down pipe, operating handle etc. including supply of AB switch, fixing of required number of channels, Jumpers, Pin/disc insulator, and equivalent to AAC Conductor and connection through P.G. Clamps on Pole structures. The necessary connection on both side of equipment's shall be done as specified by Rly. Engineer. | — | — | — | 1,73,068.15 | |
| details. | Breakup for | — | — | ||
| Supply of complete materials for erection, installation, connecting, testing and commissioning of 33KV drop out fuses barrel link & Fuses elements including fixing of required number of channels, nuts and bolts disc/pin insulators, jumpers with equivalent AAC conductors and connection through P.G. clamps. . The necessary connection on both side of equipment's shall be done as specified by Rly. Engineer. | — | — | — | 1,21,972.9 | |
| details. | Breakup for | — | — | ||
| Supply , connection, testing and commissioning of GI strip size 32 x 6mm for earthing arrangement. | — | — | — | 40,520 | |
| — | 20.00 | — | — | ||
| Supply, erection, connection, testing and commissioning of 100 Amp MCCB with enclosure. Make- L&T, SIEMENS, LEGRAND or equivalent. | — | — | — | 1,51,512 | |
| — | 30.00 | — | — | ||
| Supply, erection, connection, testing and commissioning of 63 Amp MCCB with enclosure. Make- L&T, SIEMENS, LEGRAND or equivalent. | — | — | — | 1,97,574.6 | |
| — | 2.00 | — | — | ||
| Erection, connecting, testing and commissioning water cooler 150 ltrs complete with fixing, connecting arrangement. (Note: Water cooler will be supplied by Railway at concerned depot.) | — | — | — | 10,139.8 | |
| — | 1.00 | — | — | ||
| Supply & Erection with design, testing of 200 KVAR Automatic Power Factor Correction System complete. | — | — | — | 2,26,560 | |
| — | 201.00 | — | — | ||
| 12 mm cement plaster of mix: 1:4 (1 Cement: 4 Coarse sand) | — | — | — | 61,757.25 | |
| — | 201.00 | — | — | ||
| Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | — | — | — | 43,074.3 | |
| — | 201.00 | — | — | ||
| Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr/10 sqm. | — | — | — | 31,948.95 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .